I need to translate standard Qt QPageSetupDialog that I thought used by QPrintPreviewDialog, but now I am not sure. I was able to translate QPrintPreviewDialog itself by using qtbase_de.qm, I generated it with lrelease and qtbase_de.ts downloaded from qt documentation.
Translated QPrintPreviewDialog, but not QPrintDialog
Not translated QPageSetupDialog
There is no translations for QPageSetupDialog actually, only for some QPageSetupWidget
So am I still able to translate QPageSetupDialog and QPrintDialog?
Related
In my project, there is a language page with four language options. If we change them, entire application language and some images changes. My problem is is there any signal/ callback to switch resources as like in Android or any some other mechanism we should follow for this QML?
To do what you need, first, get familiar with official documentation on Internationalization and Localization with Qt Quick.
Next you need to wrap all strings that should be translated into qsTr. Then, here is simplified code of switching languages:
void Settings::switchToLanguage(const QString &language)
{
if (!m_translator.isEmpty())
QCoreApplication::removeTranslator(&m_translator);
m_translator.load(QStringLiteral(":/language_") + language));
QCoreApplication::installTranslator(&m_translator));
m_engine->retranslate();
}
According to article New in Qt 5.10: Dynamic Language Change in QML.
I would like to use native rendering for all the text in my application. For each Text, Label, etc. element I can do this
Text {
renderType: Text.NativeRendering
}
to trigger native rendering. I can also use the software renderer for the whole application:
QQuickWindow::setSceneGraphBackend(QSGRendererInterface::Software);
However due to some bugs with the software renderer and some performance issues, I would like to avoid that.
Is there a global switch to change the render type?
Since Qt 5.7, you can change the default Qt Quick text render type, but unfortunately only at build time. In order to change the default, you would have to rebuild libQt5Quick.so with QT_QUICK_DEFAULT_TEXT_RENDER_TYPE set to NativeRendering. For more details, see https://codereview.qt-project.org/#/c/121748/ .
If you have installed Qt using an installer from qt.io, install the source packages using the maintenance tool if you already haven't done so, navigate to qtdeclarative/src/quick, run qmake with the define, and build. Something along the lines:
cd path/to/Qt/Sources/5.8/qtdeclarative/src/quick
# NOTE: make sure to run qmake from the same/correct Qt installation
path/to/Qt/5.8/<spec>/qmake "DEFINES+=QT_QUICK_DEFAULT_TEXT_RENDER_TYPE=NativeRendering"
make -jN
If you have a self-built Qt installation, invoke make clean (or if you want to save time, just delete qquicktext*.o) before make to rebuild the library.
EDIT: Since Qt 5.10, it is also possible to specify the default text render type in C++ via QQuickWindow::setTextRenderType(). Just notice to set it before loading the QML content.
The environment variable QML_DISABLE_DISTANCEFIELD controls this.
If you put
qputenv("QML_DISABLE_DISTANCEFIELD", "1");
at the beginning of your main, you will get a nice and sharp text rendering everywhere.
Source: http://www.kdab.com/~thomas/stuff/distancefield.html
Add this line first in c++ main function : QCoreApplication::setAttribute(Qt::AA_UseSoftwareOpenGL);
When I create the "Command link button" (QCommandLinkButton) it has relatively nice green arrow icon.
I would like to see what other nice icons can I choose. When I try to change the icon, [Theme] appears instead of path or some GUI selection dialog:
I also noticed the context menu:
When I click Set icon from theme, again expecting some GUI selection list, I get just a text field:
What I was imagining:
Where's the list of icons from which the green arrow was taken?
QIcon::fromTheme works under specific conditions.
If it can find it in the QIcon::themeSearchPaths() for the QIcon::themeName()
If the desired icon isn't there, Qt Designer won't be able to do any of the from theme, named icons.
But... if you check your target system for the theme search paths and set the theme name, you are more likely to have success.
Example
On linux, I wanted to get a plus and a minus icon.
I found list-add.png and list-remove.png fit the bill.
https://github.com/GNOME/adwaita-icon-theme/tree/master/Adwaita/16x16/actions
http://standards.freedesktop.org/icon-theme-spec/icon-theme-spec-latest.html
http://standards.freedesktop.org/icon-naming-spec/icon-naming-spec-latest.html
I did a locate on my system and found these:
/usr/share/icons/gnome/16x16/actions/list-add.png
...
/usr/share/icons/gnome/32x32/actions/list-add.png
/usr/share/icons/gnome/scalable/actions/list-add.svg
/usr/share/icons/oxygen/16x16/actions/list-add.png
...
Forcing with fallback icon in QIcon::fromTheme
Find the icon on the filesystem:
ui->toolButton->setIcon(QIcon::fromTheme("list-add",
QIcon("/usr/share/icons/gnome/16x16/actions/list-add.png")));
Find the icon in the qt resource system...
Add the icon in a qrc file in your build, then reference it's path.
ui->toolButton->setIcon(QIcon::fromTheme("list-add",
QIcon(":/list-add.png")));
Overriding the current icon theme
qDebug() << "themeSearchPaths:" << QIcon::themeSearchPaths() << QIcon::themeName();
// themeSearchPaths: ("/usr/local/share/icons", "/usr/share/icons", ":/icons") "hicolor"
The default theme for the system, and for the target deployment machine, likely didn't have the icons in it I wanted... but the gnome or oxygen icon desktop theme installed would almost always have it...
QIcon::setThemeName("oxygen");
Note that you won't see the preview in Qt Designer necessarily because it doesn't set the theme until runtime of your code.
The gnome icon library has 1100+ icons in it. Here is one list:
https://gist.github.com/peteristhegreat/c0ca6e1a57e5d4b9cd0bb1d7b3be1d6a
This works as long as you know what themes are available on the target system.
The list from freedesktop.org has 286 icons listed.
Use icons included in Qt
Just like #peppe pointed out, Qt includes 70 standard icons, too.
widget->setIcon(widget->style()->standardIcon(QStyle::SP_BrowserReload));
http://doc.qt.io/qt-5/qstyle.html#StandardPixmap-enum
Conclusion
Using a stock library on your target system is probably the fastest. Using the Qt built-ins is fast to figure out and use, but is fairly limited. Using a resource file is probably the most robust method, and gives unlimited options on what icon to use.
Be sure to pick a standard icon pack, and think about licensing and attributions, and some other things like that.
And there is no shortage of icons available online:
https://www.quora.com/What-is-the-best-icon-library
https://www.google.com/search?q=open+source+icon+library
Hope that helps.
I don't think that's the function you want to use. The "theme" name there corresponds to the QIcon::fromTheme functionality, which uses icons named according to the FDO specification
http://standards.freedesktop.org/icon-theme-spec/icon-theme-spec-latest.html
http://standards.freedesktop.org/icon-naming-spec/icon-naming-spec-latest.html
And they're not really supported on non-FDO platforms (Windows, Mac, ...) unless you deploy your own theme files.
Now some stock icons are shipped with Qt itself; I don't know how to set them from Designer, but from code you can use QStyle::standardIcon:
widget->setIcon(widget->style()->standardIcon(QStyle::SP_BrowserReload));
If the icon you need is not provided by Qt, you'll need to ship it. In that case the Resource System is a convenient way to bundle it alongside your executable.
Last, but not least, from a UX point of view you should consider using QToolButtons unless you're really building a Vista-like wizard.
When you place the mouse pointer over any Qt function/class it shows a pop-up with short description of what it does, taken from the docs in the comment above the function/class.
For my functions/classes I have documentation in the doxygen format:
/**
Returns foo
*/
QString getFoo() {
return "foo";
}
When this function is used, I want to view the same type of pop-up with my docs when the mouse pointer is over the function name.
Is it possible to do that with Qt Creator?
Unfortunately it's not possible for Qt Creator (as of the recently release 2.4) to pick up the tags on-the-fly. However, what might work is to let doxygen run, and tell it to create qch files. If you register the created qch file, you should get mouse-over and even a proper help file. See http://www.ogre3d.org/tikiwiki/Integrating+API+documentation+into+Qt+Creator+Help for how Ogre3D does it. YMMV if that's worth it for a fast-changing project. It's certainly a good idea for a (semi-)stable library.
Relevant bug report: https://bugreports.qt.io/browse/QTCREATORBUG-4557
Qt Creator requires the generated docs to have some special markers in order to retrieve the tooltip text. I couldn't find a way to insert these markers with Doxygen so I've created a simple script to do it:
https://github.com/mmmarcos/doxygen2qtcreator
It's not bulletproof but it allows us to integrate our classes and methods briefs into Qt Creator tooltips.
In qt-designer I loaded bitmap images and in preview I am able to view the images. But after compiling in qdevelop IDE, I could not see the images at all.
Is there any procedure to load the bitmaps in to qdevelop.
Thanks in advance
I think you'll be wanting to add the bitmaps to a resource file, using Qt's resource system, if you want to be able to use them in Designer and also have them work in your compiled application correctly. I've not used it, but the examples look fairly straightforward, and it appears QDevelop supports the resource system to some extent.
Have you configured Qt to use required images plugins?
[-no-gif] [-qt-gif] [-no-libtiff] [-system-libtiff] [-no-libpng] [-qt-libpng] [-system-libpng] [-no-libmng] [-qt-libmng] [-system-libmng] [-no-libjpeg] [-qt-libjpeg] [-system-libjpeg]