Below issue was posted by me on https://github.com/XiaoFaye/WooCommerce.NET/issues/414 but since this may not be related at all to WooCommerce.Net but on a lowerlevel to Apache/Word/WooCommerc itself I am posting the same question here
I am really stuck with the famous error:
WebException: {"code":"woocommerce_rest_authentication_error","message":"Invalid signature - provided signature does not match.","data":{"status":401}}
FYI:
I have two wordpress instance running. One on my local machine and one on a remote server. The remote server is, as my local machine, in our company's LAN
I am running WAMP on both machines to run Apache and host Wordpress on port 80
The error ONLY occurs when trying to call the Rest api on the remote server. Connecting to the local rest api, the Rest Api/WooCommerceNet is working like a charm :-)
From my local browser I can login to the remote WooCommerce instance without any problem
On the remote server I have defined WP_SITEURL as 'http://[ip address]/webshop/ and WP_HOME as 'http://[ip address]/webshopin wp-config.php
Calling the api url (http://[ip address]/webshop/wp-json/wc/v3/) from my local browser works OK. I get the normal JSON response
Authentication is done through the WooCommerce.Net wrapper which only requires a consumer key, consumer secret and the api url. I am sure I am using the right consumer key and secret and the proper api url http://[ip address]/webshop/wp-json/wc/v3/ (see previous bullet)
I already played around with the authorizedHeader variable (true/false) when instantiating a WooCommerce RestApi but this has no effect
Is there anybody that can point me into the direction of a solution?
Your help will be much appreciated!
In my case, the problem was in my url adress. The URL Adress had two // begin wp-json
Url Before the solution: http://localhost:8080/wordpress//wp-json/wc/v3/
URL Now, and works ok: http://localhost:8080/wordpress/wp-json/wc/v3/
I use with this sentence.
RestAPI rest = new RestAPI(cUrlApi, Funciones.CK, Funciones.CS,false);
WCObject wc = new WCObject(rest);
var lstWooCategorias = await wc.Category.GetAll();
I hope my answer helps you.
Had the same issue. My fault was to define my url incorrect: http:// instead of https://.
Related
I've encountered a challenge regarding internet-facing deployment installation for CRM using a AD FS server. After the setup is complete, users are able to access the CRM server - but when trying to run custom pages the following error message is prompted:
"The authentication endpoint Kerberos was not found on the configured Secure Token Service!"
I've found several solutions on the internet for this issue:
First I found a KB article from Microsoft providing a possible
solution, this involves updating MEX endpoints by running a provided
PowerShell script.
(https://support.microsoft.com/en-us/help/2828015/configuring-ad-fs-2.1-with-microsoft-dynamics-crm-2011).
But this doesn't seem to be the issue.
Another solution could be to update the CRM rollup version (currently have version 14 installed, latest is version 18) - this is something that I want to avoid as it might lead to further issues.
Have anybody else encountered a similar issue, and in that case how did you solve it?
I have just spent last few days to figure this exact same error message and it turned out that it was the "Domain" attribute in crm connection string. Copied my answer to my own question at the Microsoft Dynamics CRM community forum here:
"Well, I found the culprit - it was the Domain attribute in the connection string:
For connecting from outside the domain, it does not like to have a Domain in the connection string:
Connection string format 1 (without Domain attribute): "Authentication Type=Passport;Server=https://devcrm.myco.com;Username=devuser#myco.com;Password=pwd" - this works both inside and outside the domain "myco.com"
Connection string format 2 (with Domain attribute): "Authentication Type=Passport;Server=https://devcrm.myco.com;Domain=myco;Username=devuser#myco.com;Password=pwd" - this only works inside the domain myco.com but NOT outside (exception: The authentication endpoint Kerberos was not found on the configured Secure Token Service!)
The key is in the Xrm.Client.CrmConnection.ClientCredential:
If Domain is NOT specified in the connection string, when connecting from outside domain, Xrm.Client.CrmConnection.ClientCredentials.UserName is populated whereas the ClientCredentials.Windows.ClientCredentials.UserName is empty.
But if the Domain is specified, Xrm.Client.CrmConnection.ClientCredentials.UserName becomes null and Xrm.Client.CrmConnection.ClientCredentials.Windows.ClientCredentials.UserName populated, which led to the service trying to authenticate user as a Windows AD user so of course it would fail when running app from outside Windows domain. And it explains why the same app works inside the domain even with Domain specified in the connection string.
For more detail, refer here for my original post asking for help in Dynamics CRM Forum
I am developing an application in Salesforce that should communicate with a server to get some data. the server address is like this http://192.168.115.22/.
this is the HttpRequest object i am constructing in my Apex code is :
HttpRequest request = new HttpRequest();
String username = "myLogin", passwd = "myPassword";
String dataUrl = 'sli=on&fli=on&login=' + username + '&password=' + passwd + 'the rest of data';
request.setMethod('POST');
request.setEndpoint('http://192.168.115.22/Services/getLicenses');
request.setHeader('Content-Type','application/x-www-form-urlencoded');
request.setHeader('Content-Length', String.valueOf(dataUrl.length()));
request.setBody(dataUrl);
Http http = new Http();
HttpResponse response = http.send(request);
But the response i am getting contains this error :
The following error was encountered while trying to retrieve the URL: http://192.168.115.22/Licgen/Service/getLicensePackage?
Access Denied.
i don't know what is the problem with the url i am constructing, and when i write the url manually in my navigator i have access to the server.
Any help please.
This issue, in light of having already been added to the whitelist for endpoints, I think has to do with the fact that 192.168 IP addresses denote local IP addresses within a network normally.
It's likely that you can reach it because you're on your network, but Salesforce cannot see your network from the inside. You would need to use something like ngrok.com which allows you to expose a local machine to an outside available IP address.
You can also find out your router's IP address if you are at home, and port forward to your 192.168.115.22 local machine through it to expose it to the outside world, but I've had a much easier time with ngrok.com for easy integration testing with my applications.
Some Information On 192.168 addresses
(Adding this answer because my other answer could legitimately solve someone searching for the same issue above)
This issue may have to do with the fact that Salesforce prevents outside calls to un-authorized endpoints. Fortunately, it is a simple matter of adding an endpoint to the whitelist of authorized outbound connection points.
Under the setup menu option, and then again under teh security menu, there is a menu item called remote site settings. Within this option you'll see a list of sites you are allowed to access from within Salesforce. If your endpoint isn't in the list, add it and you may get a different result.
Please let me know if you have already added this to the whitelist and it is still a problem.
I have recently moved a project over to another server. The domain name is the same, it has just been pointed to the new server. The URL is exactly the same. Since moving the project over however I get this error when the app tries to connect to googles OAuth api.
{
"name": "Error calling GET https:\/\/www.googleapis.com\/analytics\/v3\/management\/accounts\/~all\/webproperties\/~all\/profiles?key=AIzaSyBKUP8JriiOnFnbJm_QYt_bHTMuHf-ilAI: (403) There is a per-IP or per-Referer restriction configured on your API key and the request does not match these restrictions. Please use the Google Developers Console to update your API key configuration if request from this IP or referer should be allowed.",
"url": "\/analytics\/statistics.json"
}
The obvious reason (based on the error message) would be that I haven't added the new server IP into the list of allowed IP's in the devlopers console under APIs & auth->Credentials->Key for server applications.
I have added the IP. I've checked the domain has propagated by pinging it and the new IP comes up which has been entered in the console so i'm struggling to work out why it doesn't work.
Has anybody come across this before that may be able to help me solve it?
Go to Project -> APIs & Auth -> Credentials -> API Key -> Create New Key -> Browser Key. It may take upto 5 minutes to reflect changes.
And it worked for me.
After you added your new server IP you need to generate a new API key from the Console. This message shows up when access in not properly configured. Look here and scroll down to "accessNotConfigured".
So, go to your developer console, Project -> APIs & Auth -> Credentials -> Public API Access -> Create New Key -> Server Key. Use this new key and you should be good to go.
I've had this problem for a while as well but finally solved it:
I noticed when trying wget http://bot.whatismyipaddress.com/ from my server it would actually return an IPv6-address, when on the API key's config page I had entered the IPv4-Address of my server. Once I added the IPv6-Address, my requests where finally accepted.
Go to Project -> APIs & Auth -> Credentials -> Public API Access -> Create New Key -> Server Key >> Accept requests from these server IP addresses (Optional) section,
then remove all the IP Address and Update it first, then try it. And, later you can add the specific IP address which did weirdly work for me.
I am working on a Symfony2 app. I'm using FOSUserBundle to handle authentication and recently integrated it with FOSUserBundle using this tutorial: https://gist.github.com/danvbe/4476697 .
The problem is:
I can login using the google api on localhost and everything works fine.
However when I try to login on a real server I get:
Error: invalid_request
device_id and device_name are required for private IP: http://<server_ip>/login/check-google
Request details:
response_type=code
scope=https://www.googleapis.com/auth/userinfo.email https://www.googleapis.com/auth/userinfo.profile
redirect_uri=http://<server_ip>/login/check-google
client_id=<my_id>
Google documents don't mention these two parameters. I tried to manually send a request with device_id being a UUID and device_name set to "notes". The response I get this time is:
Error: invalid_request
Device info can be set only for native apps.
Request details:
cookie_policy_enforce=false
response_type=code
device_name=notes
scope=https://www.googleapis.com/auth/userinfo.email https://www.googleapis.com/auth/userinfo.profile
redirect_uri=http://<server_ip>/login/check-google
device_id=4b3403665fea6
client_id=<my_id>
Now, what am I doing wrong?
Google will not accept a local (private) IP address when doing Oauth or API calls. My workaround was to add an entry in my Windows hosts file for the local IP:
\Windows\System32\drivers\etc
192.168.1.2 fakedomain.com
then register it with Google in their dev console. That appears as a "real" domain to them, but will still resolve in your browser or code to the local IP. I'm sure a similar approach on Mac or Linux would also work.
It really looks like your using the wrong flavor of oauth. device_id is used with Devices. I would really expect you to be using the WebServer flow. You may need one of the other flows as I don't see enough detail here to judge, but they all can be found at the links.
I am trying to send activation mail to the currently registered user.In mail body,I need to send a link like http://example.com/account/activation?username=d&email=g.Now, for debugging on local machine, I manually write it as localhost:30995/account/activation?username=d&email=g. But, when my port number changes, I need to rewrite it.
I tried another question
on this website,but, compiler gives error like url.action doesnot exist.
Please give me fresh solution as I am confused with that solution.
Use a Url.Action overload that takes a protocol parameter to generate your URLs:
Url.Action("Activation", "Account", new { username = "d", email = "g" }, "http")
This generates an absolute URL rather than a relative one. The protocol can be either "http" or "https". So this will return http://localhost:XXXXX/account/activation?username=d&email=g on your local machine, and http://example.com/account/activation?username=d&email=g on production.
In short, this will stick whatever domain you're hosting your app on in front of your URL; you can then change your hostname/port number/domain name as many times as you want. Your links will always point to the host they originated from. That should solve the problem you're facing.
Try using IIS / IIS-Express instead of Casinni web server that comes with visual studio.
You could add bindings to have the right URL (with host entries of course).
This will avoid the port numbers in your links.