I am having difficulty getting an ASP.NET Core 2.2 app running behind IIS 7.5 on Windows Server 2008 R2.
I am able to run the app manually (with dotnet .\WebApp.dll), so I believe the framework/runtime is correctly installed, but there seems to be an issue with the AspNetCore Module when trying to run with IIS. I receive an HTTP 502.5 - Process Failure response from IIS, and in Event Viewer I have found the following error:
Application 'APP_NAME' with physical root 'C:\path\to\app' failed to start process with commandline 'dotnet .\WebApp.dll', ErrorCode = '0x80004005' : 80008082.
I am unable to find information on the error code '0x80004005' : 80008082. Anyone know where I can find the specific meaning of this code?
EDIT: I have seen posts regarding error code '0x80004005' : 80008083, but this does not seem to be the same issue. With that error code, it seems that the app can not be run manually, which I am able to do with no problems.
I now have the app running successfully, and I believe the cause to have been that the app was published as a standalone app instead of framework dependent. I had originally published the app as a self-contained win-x86 app, and neither the default processPath="App.exe" nor processPath="dotnet" arguments=".\WebApplication3.dll" worked.
After publishing as a framework-dependent portable app, things are now working correctly.
Related
I have a .NET Core 3.1 console app I have deployed to server and setup as a windows service. I can open cmd window as admin and navigate to the exe and it runs the exe with no errors or issues.
However when I try to start the Windows Service it immediately fails with an error:
Windows could not start the service on the local computer. Error 1053: The Service did not respond to the start or control request in a timely fashion.
We have ServicesPipeTimeout set to 180000
and rebooted server but it still fails immediately. Shouldn't it take time before the timeout error comes up?
I have also ensured we have the Release version of the code as I found posting saying Debug versions of code will cause this issue.
The folder permissions are as follows:
Since the console app runs fine from the command prompt there should not be an issue with the code/framework on the system?
Is there anything else to check?
I have created an Angular2/.NETCore application in Visual Studio, which when debugged works fine. I published this on my local IIS, and this also is running fine. However when I moved everything to a remote server, I got the following error:-
HTTP Error 500.19 - Internal Server Error
Detailed Error Information:
Module IIS Web Core
Notification Unknown
Handler Not yet determined
Error Code 0x8007000d
Config Error
I checked that I have the correct permissions on the remote IIS, however I cannot understand why I am getting this error.
I already tried the following link
but no luck so far.
Anyone has any idea what the problem might be?
Thanks for your help and time.
Install the .NET Core Windows Server Hosting bundle on the hosting system. The bundle will install the .NET Core Runtime, .NET Core Library, and the ASP.NET Core Module.
For more information refer this link.
I am trying to build a simple web service in C# using VS2015 to be hosted on Windows Server 2012R2.
I have the code written and it works properly when hosted in the Visual Studio debugger. The debugger will launch IE and give me the UI to test the simple methods in my code. I can enter a temperature in Celsius and get back the temperature in Farentheit. So my understanding is that my code itself is working.
However, when I publish my project and attempt to load it in IE, I get:
Server Error in '/' Application.
Parser Error
Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately.
Parser Error Message: Could not create type 'TestAutomation.AutomationInterface'.
Source Error:
Line 1: <%# WebService Language="C#" CodeBehind="~/App_Code/WebService.cs" Class="TestAutomation.AutomationInterface" %>
Source File: /TestToolsAutomation/AutomationInterface.asmx Line: 1
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.6.81.0
I am publishing my project by going to Build -> Publish Web App. I am selecting "File System" as my publish method and am publishing to "C:\inetpub\wwwroot\MyAppName" in the Debug configuration with no check boxes in the File Publish Options. When I publish, I have the following files in the MyAppName folder:
-AutomationInterface.asmx
-Web.config
\App_Code
WebService.cs
The obvious issue I see here is that there is no .dll file created with my compiled code. I'm far from an IIS expert, but isn't this supposed to be created the first time a user requests the page?
I then re-published and checked "Precompile during publishing" in the file options. When I do this, a \bin folder is created with files "App_Code.compiled" and "App_Code.dll" files. However, I get the same error in the browser.
Because my code works in the VS debugger but not when hosted in IIS, I suspect the problem is on the IIS side of things, but I'm not 100% certain of that.
When I request the IIS page in IE, I get an event 1310 with source "ASP.NET 4.0.3.30319.0" in the application event log that says "Event code: 3006
Event message: A parser error has occurred" along with a stack trace that shows a bunch of System.Web.Compilation functions.
I have searched for this error on Stack Overflow and other sites, but none of the suggested solutions appear to solve my particular problem.
I would appreciate any help the community could offer.
UPDATE: I enabled failed request tracing on the server. It appears that the error happens here:
154. view trace
Warning
-MODULE_SET_RESPONSE_ERROR_STATUS
ModuleName
ManagedPipelineHandler
Notification
MAP_REQUEST_HANDLER
HttpStatus
500
HttpReason
Internal Server Error
HttpSubStatus
0
ErrorCode
The operation completed successfully.
(0x0)
ConfigExceptionInfo
ManagedPipelineHandler
I lack the background to fully understand what IIS is trying to tell me. Any tips would be appreciated.
After struggling with this for hours and making all kinds of settings changes, and uninstalling and reinstalling IIS several times, I finally solved this.
I had to right-click on the folder in which I published my files in IIS Manager and select "Convert to Application." It's now working!
Here are a few possible ideas to explore:
Have you looked at the permissions for the account that the Application Pool in IIS is using to run this? There can be ASP.Net Temporary files that aren't being generated that could be an issue here.
Is ASP.Net registered with IIS? I've remembered more than a few times to have to run "aspnet_regiis -i" on servers to install the ASP.Net part so that it'll be present within IIS.
Is IIS configured to allow ASP.Net requests? In the IIS Manager on the machine level there is an "ISAPI and CGI Restrictions" to note.
Update: Perhaps you could look at the configuration for the Application Pool and see which .Net version it is using and whether it is integrated or classic mode. Those would be the next level of things to examine.
I've been trying to install the new Microsoft Release Management app that has just been released to MSDN and am having issues
It consists of a server side component for TFS 2013, and a client side component for VS2013
The server side component runs through and says that it is installed fine, but then i can't seem to connect the client side part up to it
After a bit of investigation it seems that the web services site that is installed on the server side is not working properly
It is installed on a Windows 2012 box that is also running TFS 2013, SQL 2012, and SharePoint 2013
If i browse to the newly created ReleaseManagement website I get a 503 (Service Unavailable) message.
I checked out IIS and the app pool had stopped
in the application event log I could see a load of messages saying "current configuration only supports loading images for x86 processor architectures"
I thought this was possibly to do with the "Enable 32-bit Applications" option in the IIS app pool (was set to FALSE)
I changed that to true and tried the site again. This time the app pool doesn't crash, but I get ASP.NET errors stating "Could not load file or assembly 'Interop.ActiveDs' or one of its dependencies. An attempt was made to load a program with an incorrect format."
Has anyone managed to install this yet? Any ideas on what's going wrong here?
I know it's very new, but I'm struggling to find much information about the product at all
Thanks a lot
Here is a link towards some documentation regarding this problem. As pointed out in the comments, it is related to a bug caused by SharePoint: http://support.inreleasesoftware.com/entries/24794668
Interesting section:
The request failed with HTTP status 503: Service Unavailable.
This error message usually means that the InReleaseAppPool application
pool is stopped. Please ensure that it is started. If the application
pool stops after some time by itself, it might be due to a bug caused
by SharePoint 2013. Validate your problem by looking at the Event
Viewer. Confirm that your error is similar to the following:
Event Log Error Event ID 2282
The Module DLL 'C:\Program Files\Common Files\Microsoft Shared\Web
Server Extensions\15\isapi\spnativerequestmodule.dll' could not be
loaded due to a configuration problem. The current configuration only
supports loading images built for a x86 processor architecture. The
data field contains the error number. To learn more about this issue,
including how to troubleshooting this kind of processor architecture
mismatch error, see http://go.microsoft.com/fwlink/?LinkId=29349.
We can apply a quick fix using this command
appcmd.exe set config -section:system.webServer/globalModules
/[name='SPNativeRequestModule'].preCondition:integratedMode,bitness64
Or you can manually enter the preCondition entry in the
ApplicationHost.config file
More information can be found here:
http://blogs.flexnetconsult.co.uk/colinbyrne/2012/11/11/RunningA32bitApplicationAlongsideSharePoint2013Problems.aspx
FIX:
the user which you specified to run the TFS service needs "log on as a service" and "Log on as batch job" permissions. I've set that up via GPO.
This solution worked for me. I execute this command
appcmd.exe set config -section:system.webServer/globalModule/[name='SPNativeRequestModule'].preCondition:integratedMode,bitness64
in C:\Windows\System32\inetsrv and C:\Windows\System64\inetsrv.
I have set up a Continuous Integration build with TeamCity and MSBuild. I am using the MSBuild Extension Pack, primarily for its IIS7AppPool Task. My goal is to stop an IIS app pool before the build script does a deployment step and start the app pool afterwards. The IIS app pool is on a different server from the build agent.
I have used the following MS Build code to stop IIS:
<MSBuild.ExtensionPack.Web.Iis7AppPool TaskAction="Stop" MachineName="$(DeploymentServerName)" Name="$(WebAppPoolName)" Username="$(DeploymentServerUsername)" UserPassword="$(DeploymentServerUserPassword)" />
I have set up a local admin user account on the web server, and used its username and password above as $(DeploymentServerUsername) and $(DeploymentServerPassword).
The error I am receiving is:
[MSBuild.ExtensionPack.Web.Iis7AppPool]
E:\TeamCity\BuildAgent\work\1a1dc058c29f0f12\BuildAndDeployment\Build_DevCI.proj(153,
5): UnauthorizedAccessException: Retrieving the COM class factory for
remote component with CLSID {2B72133B-3F5B-4602-8952-803546CE3344}
from machine DEPLOYMENTSERVERMACHINENAME failed due to the following
error: 80070005 DEPLOYMENTSERVERMACHINENAME.
I have asked our network guys to take down any firewalls between the two machines, but I still get the same error.
Can anyone see anything wrong with my syntax or offer any advice on how to get this to work?
I can get the task to stop an IIS app pool on my local machine ok, so my syntax should be right.
I have looked at this post, but I don't think it's the same problem:
MSBuild remoting to server throws COMException error