I was looking for open source CAS online and realized there is no mention anywhere about an embedded CAS or bare-metal CAS in C (or some other language). Is it a waste of time and effort or is there any other reason for that? Maybe microcontrollers are not powerful yet but again there should be at least a mention of it.
Related
I use some kinds of network mounts (like Samba Windows shares, sshfs, scp) on different networks (LAN, Dialup). Whenever it comes to transferring a large amount of small files, I see poor performance. Far away from what would theoretically be possible. No resource appears really busy, so it seems to be a question about the software behind that (this is why I'm hopefully not OT here).
What is the problem from a software developer perspective behind that? Why do those tools not saturate any component of my system or the network?
Is that just because the Linux kernel makes some stuff complicated, or is there more to know about?
Because nowadays, we are using compilers and interpreters to develop software and operating systems. Example MS Visual Studio, Turbo C++.
Well young fellow, we had to code them up in machine language is what. Not assembler, mind you. Machine language. Raw numbers. And without any a' them fancy macros, neither, no sir. And we had to carry our work to the machine room and then take the results back to our offices. Uphill. Both ways.
I am a newbie with Xen.I want to know how does Xen work.
It's really a puzzle when facing the code and I don't know where to start.
Are there some easy articles for me?
Since you mention looking at the code, I assume you want to understand the technical details of Xen and not just merely how to start a VM.
As with all problems, start with something simple and then work your way up. Some pointers:
Be sure to have the prerequisite experience under your belt. In particular, strong C and Linux affinity, but also x86 paging and virtualized memory workings.
Make sure you have a sound grasp of the general Xen architecture. For instance, paravirtualized versus hardware-supported virtualization, the special role of the management domain (Dom0) compared to unprivileged domains (DomU), etc.
Investigate the the Xen components running in Dom0:
The Xen control library (libxc) which implements much of the logic relating to hypercalls and adds sugar around these (look in tools/libxc).
The swiss army knife for administrating Xen, namely the Xen light library (libxl). This library replaces the deprecated xm tool with the xl tool and takes care of all your maintenance tasks such as starting/stopping a VM, listing all running VMs, etc. For all these operations, it works in tandem with the aforementioned libxc. (Libxl lives in tools/libxl.)
The Xenstore is a tree-like data structure from which all running domains can retrieve and store data. This is necessary since all I/O goes through Dom0 (not the hypervisor!), and domains need to communicate with Dom0 how they are going to pass I/O along. (Look in tools/xenstore.) You can inspect the Xenstore with a tool such as xenstore-ls.
the blkback/netback kernel drivers which pass the data over shared channels to the VMs. (You will find these drivers in a recent Linux kernel (e.g. >= v3.0) that has so-called PVOPS support).
Take a look at the console daemon (tools/console). Note that sometimes the Qemu console is actually used. Qemu also comes in the pictures as a default backend for if you choose a file-backed virtual storage for a VM.
Experiment with the 'Xen-way' of inter-VM communication: Grant tables, event channels and the Xenstore. With these fundamentals you can create your own shared channel between VMs. You can do this, for example, with writing a kernel module that you use in two domains to let them talk to each other.
I can also give some pointers in the source that you can check out:
xen/xen/include/public/xen.h will give you a list of all the hypercalls with comments what they do.
xen/xen/include/xen/mm.h gives you an introduction to the different memory terminology used by Xen (i.e., real versus virtualized addresses and page numbers). If you don't grasp these differences, then reading the hypervisor code will surely be frustrating.
xen/xen/include/asm-x86/config.h gives an overview of the memory layout of Xen.
xen/tools/libxc/xenctrl.h exports a large list of interesting domain control operations, which gives an abstract view of task division between Dom0 and the hypervisor.
Last but not least, the book 'The Definitive Guide to the Xen Hypervisor' by David Chisnall comes highly recommended. It covers all these topics and more in a thorough, technical fashion with plenty of code examples.
The Xen wiki and developer mailing lists are also a great resource for understanding Xen.
If you have a more specific question, then I can give you a more specific answer.
Here are few links which will guide you with ZEN Start up.Hope they will be useful.
http://www.howtoforge.com/howtos/virtualization/xen
http://wiki.xen.org/wiki/Category:HowTo
http://wiki.debian.org/Xen
For me, that is the best and more concrete tutorial with examples and step by step to start. I used it when I started.
Then you can read a lot more on Xen documentation itself or some books but as a starting point that allows you to easily install and test Xen, I choose that tutorial from Debian Wiki.
If you just want an overview, you may read this: http://wiki.xenproject.org/wiki/Xen_Project_Beginners_Guide.
This will introduce you to Xen hypervisor, suggest configuration to set up virtual machines, provide information about the networking and finally have details about tools for the management of virtual machines.
This documentation is to get the Xen specifically on ubuntu (Most importantly, it works!)
https://help.ubuntu.com/community/Xen
===
However, if you want to go to the next level and understand the working of Xen; Xen architecture, memory management, device management, CPU scheduling etc., I would recommend reading the book "The Definitive Guide to the Xen Hypervisor".
My company has been using Hamachi to access our SVN repository for a number of years. We are a small yet widely distributed development team with each programmer in a different country working from home. The server is hosted by a non-techie in our central office. Hamachi is useful here since it has a GUI and supports remote management.
This system worked well for a while, but recently I have moved to a country with poor internet speeds. Hamachi will no longer connect 99% of the time - instead I get a "Probing..." message that doesn't resolve. It's certain to be a latency issue, as the same laptop will connect without problems when I cross the border and connect using a different ISP with better speeds.
So I really need to replace Hamachi with some other VPN/protocol that handles latency better. The techie managing the repository is not comfortable installing and configuring Apache or IIS, so it looks like HTTP is out. I tried to convince my boss to go for a web hosting company, but he doesn't trust a 3rd party with our source.
Any other recommended options / experiences out there for accessing our SVN repos that would be as simple as Hamachi for setup; but be more tolerant of network latency issues?
Perhaps it's a bit much to ask of your team, but if you have a distributed team then you could switch to a distributed version control system (eg. Mercurial or Git). These don't need to use the network so much and you won't suffer from latency problems. It is an entirely new paradigm though and your team's development processes will have to change, so you might not consider it appropriate in your case.
First I should ask why you need a VPN in the first place. Subversion can operate over HTTPS, so as long as you open the proper port on the server there shouldn't be any security or connectivity issues.
Assuming that you do need a VPN, I find it difficult to believe that an administrator uncomfortable with Apache would be more comfortable installing a whole new VPN system (much more complicated and tricky, in my estimation).
I would like to develop a Network Inventory application that works on any operating system.
Reports on every possible resource attacehd to a network.
Reports all pertinent details of hardware and software.
Thats (and i hate to use the phrase) my "End Game".
However I am running before i can crawl here.
I have no experience of this type of development, e.g. discovering a computers hardware and software settings.
I've spent almost two weeks googling and come up short! :-(.
So I am turning to you to ask these questions:-
My first step is to find an existing open source project i can incorporate into my own code that extracts the fine grained details i am after, e.g. EVERYTHING there is to know about the hardaware and software on a single machine.
Does this project exist? or do i have to develop that first?
Have i got to write all this in C?
I am guessing getting this information about a computer is going to be easier than for printers, scanners, routers etc... e.g. everything else you would find attached to a network.
Once i have access to a single computers details i then need to investigate how i can traverse an entire newtork of printers, scanners, routers, load balancers, switches, firewalls, workstations, servers, storeage devices, laptops, monitors, the list goes on and on
One problem i have is i dont have a 1000 machine newtork to play on!
Is there any such resource available on theinternet? (is that a silly question?)
Anywho, if you dont ask you wont find out!
One aspect iam really looking forward to finding out how to travers the entire network,
should i be using TCP/IP for this?
Whats a good site, blog, usergorup, book for TCP/IP development?
How do i go about getting through firewalls?
How many questions can i ask in one go? :-)
My previous question on this topic ended up with PYTHON being championed as the language/script to go with to develop this application in.
Having looked at a few PYTHON examples they all seemed to be related to WINDOWS networks
and interrogating Windows Management Instrumentation (WMI). I had the feeling you cant rely on whats in WMI, and even if you can that s no good for UNIX netwrks.
Surely there exist common code for extracting hardware and software details from a computer? Why cant i find it on the internet?
Pease help?
Theres no prizes though :-(
Thanks in advance
I would like to appologise if i have broken forum rules or not tried hard enough on my own before asking for assistance.
I just would like to start moving forward with this as its one of the best projects i have been involved with.
I am inspired by the many differnt number of challenges involved and that if i manage to produce a useful application at the end of it it would hopefully be extremely helpful to many people.
That sit
Thanks in advance
DD
as a software vendor of a discovery solution, I can just say: Respect, that you want to start a new one :-). Just in case you are interested in what it could look like: http://www.jdisc.com
Now to some of our experience:
Programming Language:
I wouldn't write it in C. Use Java or .NET. Those languages have great advantages when it comes to tracking down errors or problems. For instance, in Java (and I guess also in .NET), you can see the stack trace when something is failing. For some pieces of code (e.g. WMI access), you might need to use C++ or C (e.g. access to native APIs from Microsoft). Use a native interface or a COM bridge from Java. In .NET, it should even be easier to access the Windows APIs).
Devices:
well, network printers, router, and switches are actually easier to discover. They usually expose their information via SNMP. SNMP is pretty easy to use and pretty robust. Getting information from Windows (or even Unix) systems is a bit trickier. Protocols can be blocked, misconfigured, messed up... We had cases, where WMI was simply hanging when requesting data from a remote device.
Test Devices:
Since we are also a smaller company, we also do not have 1000 different devices to test with. But, there are some things that might help:
a) For SNMP devices use a SNMP simulator. We use MIMIC 9.0 from Gambit Solutions and we are pretty happy with it. You can import SNMP walks from network devices and simulate the device as if it would be in your network.
b) Secondly, use virtualization whenever possible. With VMware, you can install Windows, Linux, or even Solaris. We also use a project called GNS3 to emulate Cisco Routers, Firewalls or Juniper routers.
c)You can test the rest of the devices only, if you have a customer that helps you with testing and implementing new devices.
This are just some ideas to start with. But I have to tell you, that it is not trivial and it takes a lot of time....
Hope that you got some ideas to start with...
I don't know that it's open source, but we use Spiceworks (http://www.spiceworks.com) here as an IT management platform. You may get some use out of exploring that.