Declare
Vquery varchar2(32000);
Vitem varchar2(50);
Vskuloc varchar2(50);
vstartdate Date;
Vdur Number;
vtype Number;
vqty Float(126);
GP_ohpost Date:= fnc_ohpost;
sdate1 Date:= to_date('01/01/1970','dd/mm/yyyy');
Cursor C_DRIVER is
(Select h.*,b.item,b.skuloc,h.rowid
FROM SCPOMGR.histwide h, SCPOMGR.dfutosku b
WHERE h.dmdunit=b.dmdunit
AND h.loc=b.dfuloc
AND (b.eff = Sdate1 OR b.eff <= h.startdate
AND b.disc = Sdate1 OR b.disc > h.startdate)
And NOT EXISTS (SELECT 1 FROM SCPOMGR.SKUHIST d
WHERE b.dmdunit = d.item
AND b.skuloc = d.loc
AND h.startdate = d.startdate
)) order by h.StartDate;
TYPE GP_cursor_Type IS TABLE OF C_DRIVER%ROWTYPE;
GP_cursor_tab GP_cursor_Type := GP_cursor_type();
c_limit constant PLS_INTEGER DEFAULT 10;
TYPE GP_Insert_type IS TABLE OF scpomgr.skuhist%ROWTYPE;
GP_Insert_tab GP_Insert_type := GP_Insert_type();
GP_tot_accept_fetched NUMBER := 0;
begin
OPEN C_DRIVER;
LOOP
FETCH c_driver BULK COLLECT INTO GP_cursor_tab limit c_limit;
Exit when c_driver%NOTFOUND;
FOR i IN GP_cursor_tab.FIRST .. GP_cursor_tab.LAST LOOP
vquery:= 'Select ...<skipped to make post shortest>';
Execute immediate vquery BULK COLLECT INTO GP_Insert_tab;
FORALL i IN INDICES OF GP_Insert_tab
Insert into scpomgr.skuhist
values( GP_Insert_tab(i).startdate
,1
,10080
,GP_Insert_tab(i).qty
,GP_Insert_tab(i).item
,GP_Insert_tab(i).loc
);
End Loop;
End Loop;
Close C_DRIVER;
END;
/
What i want to do here is i want to use the forall query outside of loop but if i am using the forall with the 2 nd array outside the loop then.all of the records are not getting inserted to the final table..please suggest me some solution....
Ankita.
I didn't know the structure of your tables, so i made a simple tables to understand what should work here:
create table histwide (f1 number);
insert into histwide values (1);
insert into histwide values (2);
create table skuhist (f1 number);
select * from histwide
select * from skuhist
Now i changed your code keeping changed code in comments. Seems it works. I think the trouble was because of you are used Exit when c_driver%NOTFOUND; in begining of loop. It is wrong for FORALL because after first fetching cursor is empty (if limit is reached).
So, my solution of your case:
Declare
Vquery varchar2(32000);
Vitem varchar2(50);
Vskuloc varchar2(50);
vstartdate Date;
Vdur Number;
vtype Number;
vqty Float(126);
GP_ohpost Date:= trunc(sysdate); --fnc_ohpost;
sdate1 Date:= to_date('01/01/1970','dd/mm/yyyy');
Cursor C_DRIVER is
(Select h.*--,b.item,b.skuloc,h.rowid
--FROM SCPOMGR.histwide h, SCPOMGR.dfutosku b
FROM histwide h
/*WHERE h.dmdunit=b.dmdunit
AND h.loc=b.dfuloc
AND (b.eff = Sdate1 OR b.eff <= h.startdate
AND b.disc = Sdate1 OR b.disc > h.startdate)
And NOT EXISTS (SELECT 1 FROM SCPOMGR.SKUHIST d
WHERE b.dmdunit = d.item
AND b.skuloc = d.loc
AND h.startdate = d.startdate
)) order by h.StartDate*/
);
TYPE GP_cursor_Type IS TABLE OF C_DRIVER%ROWTYPE;
GP_cursor_tab GP_cursor_Type := GP_cursor_type();
c_limit constant PLS_INTEGER DEFAULT 10;
TYPE GP_Insert_type IS TABLE OF skuhist%ROWTYPE; --scpomgr.skuhist%ROWTYPE;
GP_Insert_tab GP_Insert_type := GP_Insert_type();
GP_tot_accept_fetched NUMBER := 0;
begin
OPEN C_DRIVER;
LOOP
FETCH c_driver BULK COLLECT INTO GP_cursor_tab limit c_limit;
Exit when GP_cursor_tab.count = 0;
dbms_output.put_line('arr cur size: '||GP_cursor_tab.count);
FOR i IN GP_cursor_tab.FIRST .. GP_cursor_tab.LAST LOOP
vquery:= 'Select * from histwide';
Execute immediate vquery BULK COLLECT INTO GP_Insert_tab;
dbms_output.put_line('arr size: '||GP_Insert_tab.count);
-- FORALL j IN INDICES OF GP_Insert_tab
FORALL j in GP_Insert_tab.first..GP_Insert_tab.last --works too
Insert into skuhist --scpomgr.skuhist
values(GP_Insert_tab(j).f1
/*GP_Insert_tab(i).startdate
,1
,10080
,GP_Insert_tab(i).qty
,GP_Insert_tab(i).item
,GP_Insert_tab(i).loc*/
);
End Loop;
Exit when c_driver%NOTFOUND; --it should be at end of the loop.
End Loop;
Close C_DRIVER;
END;
/
Hope it will help you
Related
My code:
create table info(str varchar2(30));
declare
cursor c(job emp_ast.job_id%type, dep emp_ast.department_id%type) is select employee_id
from emp_ast
where job_id=job and department_id=dep;
type t_job is table of emp_ast.job_id%type;
t t_job:=t_job();
emp emp_ast.employee_id%type;
i number(3);
begin
select job_id
bulk collect into t
from emp_ast;
for i in 10..270 loop
for j in 1..t.count loop
open c(i, t(j));
loop
fetch c into emp;
insert into info
values (i||' '||t(j)||' '||emp);
exit when c%notfound;
end loop;
i:=i+10;
end loop;
end loop;
end;
/
I get "expression 'I' cannot be used as an assignment target", reffering to the line where I increment i by 10. I am trying to save the department_id, employee_id and job_id as a string in a table for each department and each job.
At the point where you get that message, i refers to the loop control variable i defined in the line for i in 10..270 loop, not the int(3) variable defined earlier. In PL/SQL a loop definition defines a variable which is only accessible inside the loop, and which you cannot alter. I suggest you change the name of one or the other to make them unique.
EDIT
PL/SQL doesn't provide a way to step by more than 1 in a computed FOR loop. Instead, you will need to compute the desired department number value within the loop:
DECLARE
CURSOR c(job EMP_AST.JOB_ID%TYPE,
dep EMP_AST.DEPARTMENT_ID%TYPE)
IS SELECT EMPLOYEE_ID
FROM EMP_AST
WHERE JOB_ID = job AND
DEPARTMENT_ID = dep;
TYPE t_job IS TABLE OF EMP_AST.JOB_ID%TYPE;
t t_job := t_job();
emp EMP_AST.EMPLOYEE_ID%TYPE;
nDepartment NUMBER;
BEGIN
SELECT job_id
BULK COLLECT INTO t
FROM EMP_AST;
FOR i IN 1..27 LOOP
nDepartment := i * 10;
FOR j IN 1..t.COUNT LOOP
OPEN c(t(j), nDepartment);
LOOP
FETCH c INTO emp;
INSERT INTO info
VALUES (nDepartment || ' ' || t(j) || ' ' || emp);
EXIT WHEN c%notfound;
END LOOP; -- cursor c
CLOSE c;
END LOOP; -- j
END LOOP; -- i
END;
/
Note that in the code above the nDepartment value is computed within the i loop, which now increments from 1 to 27 instead of going from 10 to 270.
My code:
create table dep_emp_ast(
cod_dep number(3),
cod_ang number(3));
declare
type cref is ref cursor;
c cref;
type tab_imb is table of dept_ast.department_id%type;
t tab_imb:=tab_imb();
v_ang emp_ast.employee_id%type;
begin
select distinct department_id
bulk collect into t
from dept_ast;
forall i in 1..t.count
open c for select employee_id
from emp_ast
where department_id=t(i);
loop
fetch c into v_ang
insert into dep_emp_ast
values(t(i),v_ang);
exit when c%notfound;
end loop;
close c;
end;
/
My error says I cannot open a cursor there. But why? I want to re-open the cursor and re-use it for every value of t(i).
forall must be followed by a DML statement:
for example:
forall i in depts.first..depts.last
delete employees_temp
where department_id = depts(i);
I think what you wanted was something like:
declare
c sys_refcursor;
type tab_imb is table of dept_ast.department_id%type;
t tab_imb:=tab_imb();
v_ang emp_ast.employee_id%type;
begin
select distinct department_id
bulk collect into t
from dept_ast;
for i in 1..t.count loop
open c for
select employee_id
from emp_ast
where department_id=t(i);
loop
fetch c into v_ang;
insert into dep_emp_ast
values(t(i),v_ang);
exit when c%notfound;
end loop;
close c;
end loop;
end;
which can be simplified to
begin
for d in (
select distinct department_id
from dept_ast
)
loop
for e in (
select employee_id
from emp_ast
where department_id = d.department_id
)
loop
insert into dep_emp_ast
values (d.department_id, e.employee_id);
end loop;
end loop;
end;
which boils down to
insert into dep_emp_ast (cod_dep, cod_ang)
select e.department_id, e.employee_id
from emp_ast e
where e.department_id in
( select department_id
from dept_ast );
I have a query
SELECT originating_timestamp
FROM sys.x$dbgalertext
WHERE message_text LIKE '%Starting up%'
and to_char(ORIGINATING_TIMESTAMP,'DD-MON-YY') = to_char(systimestamp,'DD-MON-YY');
The output in a linux script is as below:
09-OCT-17 04.59.33.758 AM -05:00 09-OCT-17 05.03.22.645 AM -05:00
there are two rows above each starting by date.
I would like to have the output like
09-OCT-17 04.59.33.758 AM -05:00;09-OCT-17 05.03.22.645 AM -05:00
This is just two rows, there can be many more, I would like it so that every row is separated via delimiter.
I have tried few options like
1) using listagg:
select listagg(originating_timestamp,', ') within group(order by originating_timestamp) csv
from sys.x$dbgalertext
WHERE message_text LIKE '%Starting up%'
and to_char(ORIGINATING_TIMESTAMP,'DD-MON-YY') = to_char(systimestamp,'DD-MON-YY');
But this gives error:
ERROR at line 1:
ORA-01489: result of string concatenation is too long
2) using XMLAGG:
SELECT RTRIM(XMLAGG(XMLELEMENT(E,originating_timestamp,';').EXTRACT('//text()') ORDER BY originating_timestamp).GetClobVal(),',') AS LIST
FROM sys.x$dbgalertext
WHERE message_text LIKE '%Starting up%'
and to_char(ORIGINATING_TIMESTAMP,'DD-MON-YY')= to_char(systimestamp,'DD-MON-YY');
But the output is like :
2017-10-09T04:59:33.758-05:00;2017-10-09T05:03:22.645-05:00;
Which is also not correct.
e.g. Select username from dba_users. Suppose there are 10 users, i want those 10 usernames to be separated via delimiter.
Below two anonymous block example which may be helpful to solve your problem :
SET SERVEROUTPUT ON SIZE 1000000
DECLARE
res VARCHAR2(100);
tmp VARCHAR2(100);
BEGIN
FOR i IN 1..10 LOOP
IF i != 10 THEN
select 'a' ||',' into tmp from dual;
ELSE
select 'a' into tmp from dual;
END IF;
res := concat(res,tmp);
END LOOP;
DBMS_OUTPUT.PUT_LINE(res);
END;
/
Second :
SET SERVEROUTPUT ON SIZE 1000000
DECLARE
res VARCHAR2(1000);
tmp VARCHAR2(1000);
BEGIN
FOR i IN 1..10 LOOP
IF i != 10 THEN
select TO_CHAR(sysdate,'DD-MON-YYYYHH24:MI') || ',' into tmp from dual;
ELSE
select TO_CHAR(sysdate,'DD-MON-YYYYHH24:MI') into tmp from dual;
END IF;
res := concat(res,tmp);
END LOOP;
DBMS_OUTPUT.PUT_LINE(res);
END;
/
You should replace my query select with yours and of course the format of date you wanna get and replace comma with your desire character .
To make it working properly i wanna suggest you to create a cursor :
SET SERVEROUTPUT ON SIZE 1000000
DECLARE
res VARCHAR2(100);
tmp VARCHAR2(100);
cont NUMBER;
CURSOR C_1 IS
SELECT to_char(originating_timestamp,'your date format')
originating_timestamp
FROM sys.x$dbgalertext
WHERE message_text LIKE '%Starting up%'
and to_char(ORIGINATING_TIMESTAMP,'DD-MON-YY') = to_char(systimestamp,'DD-MON-YY');
BEGIN
cont := 0;
FOR C_row IN C_1 LOOP
IF cont != C_1%rowcount THEN
tmp := C_row.originating_timestamp ||',';
res := concat(res,tmp);
ELSE
tmp := C_row.originating_timestamp;
res := concat(res,tmp);
END IF;
cont := cont +1;
END LOOP;
DBMS_OUTPUT.PUT_LINE(res);
END;
/
I have some variables that I would like to assign values based on a cursor in PL/SQL.
the variables are variable_1, variable_2, variable_3.
FOR cursor_name IN
(SELECT *
FROM
(select acct_id from dual)
LOOP
//Exit when i > 3
variable_i := acct_id;
i:= i+1;
END LOOP;
Thanks
When you go through a cursor with a FOR loop you get a record with all the fields in the query, in your case the record is named 'cursor_name'. :
FOR cursor_name IN (SELECT acct_id FROM dual) LOOP
//Exit when i > 3
variable_i := cursor_name.acct_id;
i:= i+1;
END LOOP;
My Problem is that I want to execute a dynamic SQL-Query within PL/SQL where I have a List of IDs as my Array Bind.
In the Oracle-Documentation I found some Examples how to join Lists of Numbers to an DML-Statement. (http://docs.oracle.com/cd/B28359_01/appdev.111/b28419/d_sql.htm#i996963)
Now I am trying to make the same thing for Select-Statements.
I know that I can use Array-Binds for the execute immediate-Statement. But this has the disadvantage that I must know the exact number of Bind-Variables before executing the Statement. That is the reason why I have to use dbms_sql.
The following Example Returns only one Row, but it should return 3 rows. Does anyone know what the Problem with my Example is?
--TestData:
CREATE TABLE PERSON AS
SELECT LEVEL AS ID, 'Person_'||LEVEL AS NAME
FROM DUAL CONNECT BY LEVEL <= 5;
declare
p_ids dbms_sql.number_table;
c number;
dummy NUMBER;
p_name varchar2(100);
begin
p_ids(1) := 2;
p_ids(2) := 3;
p_ids(3) := 4;
--
c := DBMS_SQL.OPEN_CURSOR;
DBMS_SQL.PARSE(c, 'select name from PERSON where id in(:num_array)', DBMS_SQL.NATIVE);
dbms_sql.define_column(c, 1, p_name, 100);
DBMS_SQL.BIND_ARRAY(c, ':num_array', p_ids);
dummy := DBMS_SQL.EXECUTE(c);
--
loop
exit when dbms_sql.fetch_rows(c) <=0;
dbms_sql.column_value(c, 1, p_name);
dbms_output.put_line(p_name);
end loop;
DBMS_SQL.CLOSE_CURSOR(c);
end;
Here is my current solution for binding multiple values to a Select Statement, maybe someone can need it:
--TestData:
CREATE TABLE PERSON AS
SELECT LEVEL AS ID, 'Person_'||LEVEL AS NAME
FROM DUAL CONNECT BY LEVEL <= 5;
declare
c number;
dummy NUMBER;
p_name varchar2(100);
xml$ varchar2(1000);
begin
--Generate a XML-List instead of dbms_sql.number_table:
xml$ := '<ids><id>2</id><id>3</id><id>4</id></ids>';
--
c := dbms_sql.open_cursor;
--Using XML-Functions for extracting the Values from the XML-String
DBMS_SQL.PARSE(c, 'select name
from PERSON
where id in(select extractvalue(value(x), ''id'')
from table(xmlsequence(xmltype(:ids).extract(''ids/*'')))x)'
, DBMS_SQL.NATIVE);
dbms_sql.define_column(c, 1, p_name, 100);
DBMS_SQL.BIND_variable(c, ':ids', xml$);
dummy := DBMS_SQL.EXECUTE(c);
--
loop
exit when dbms_sql.fetch_rows(c) <=0;
dbms_sql.column_value(c, 1, p_name);
dbms_output.put_line(p_name);
end loop;
DBMS_SQL.CLOSE_CURSOR(c);
end;