I need to apply a accordion where icon on header is on right side. and can be open and close on click on header.
Clarity also provide a accordion but icon is on left side. I want icon on right side. is it possible ?.
if not the please suggest best way to apply accordion as i am using angular5.
I want this type of accordion (with right side icon)
clarity provide this type accordion
The caret on the left side is a conscious design choice. Having the caret on the right makes eye tracking harder, you need to bounce from one end of the container to the other constantly to see what's expandable and what's not. Since Clarity can't control the width of our containers (it's entirely dependent on the app's use of them), this can be exacerbated on large container of full-page accordions, where the caret can be 800px from the title.
In addition to this, having the caret on the left for all of our components (tree, accordion, datagrid rows, vertical navigation, etc) ensures consistency, making the app easier to use if everything looks and behave the same.
Because of these reasons, Clarity doesn't provide an explicit way to customize the position of the caret. If you still want to go against Clarity's recommendation, you can simply write your own CSS to override Clarity styles to do it, either with absolute position, flex order, or whatever solution works for the component you are using.
Related
I'm trying to make an application that looks like the Messages app from Apple.
The NSSplitView has toolbars on both subviews of the NSSplitView. They blend in with the top toolbar. It's similar to the NSToolBar but that doesn't work in NSSplitView's. Is there any way to make this work?
I tried the CNSplitView but it doesn't provide the proper effect. Is there another way of doing this that I'm missing?
The interface i'm going for is here:
Instead of using NSToolbar, you can add your own views to the top of subviews in the NSSplitView to achieve this after hiding the existing titlebar.
NSWindow's titleVisibility can be used to hide the built-in titlebar, and by setting the window's styleMask to include NSFullSizeContentViewWindowMask you can cause the split view to take up the full height of the window.
To get the blur effect like toolbars/Messages you can use NSVisualEffectView in the top views. Setting the material NSVisualEffectMaterialTitlebar will give the same look as standard titlebars.
And finally, you can put NSStackViews inside the visual effect views, and then place the titlebar controls in there.
(And depending on the content that is below your fake toolbars, you might want to look into NSScrollView's contentInsets property to allow the scroll view to show all of the content, but still be able to scroll under your toolbar).
This is probably simple, though I can't find the correct CSS trick to handle this one.
I want to have this kind of button-group (separated with lines, containing a context menu ) in Qt. They must have native look and feel (not like below examples) so the only needed change seems to be removing rounded corners of a QPushButton from its right side (for left-most button), left side (for right most button) and both (for buttons in the middle).
Qt does not support this. You can use CSS to style the buttons like in the example, but you can not use natively styled buttons like this.
If you really need this, the only option I see is to write custom controls for this, with customized drawing code for each OS GUI style you want to support.
You could also try to use standard buttons that overlap and use custom code to paint some kind of line over the overlapping region, but I don't think that would be a good solution.
I am building this form: http://codepen.io/anon/pen/gFoIG/
and so far I am satisfied. Unfortunately I have some issue that I seem not able to fix.
First of all, I want to enforce the label positions beside their respective inputs. Now the form breaks down easily (with the opera emulator for smartphone and tablet, the privacy label goes below the check, but I want that it stays beside it)
The other issue that I have is that I want it to fall back gracefully when there are small screens, like placing the second image below the first and placing the input controls one below the other and take the full screen width to be bigger and easier to interact with, but so far I only was able to break the layout with my tests.
This issue: the the form layout breaks, the internal control (input, button, etc) go outside the container div. How do I enforce the container to keep everything inside? I've experimented with blocks, floats and whatever, but if the layout breaks, the input boxes usually go outside the gray rectangle.
Last issue: If I insert this form inside an existing website (for example, a page in wordpress) the layout get completely destroyed because influences from the theme style. How do I enforce my style on my form, keeping it isolated from the other styles? I can think of the iframe as a solution, but it is the only one? It is a good practice?
Anyone can help me with that?
You might want to take a look here. Its a site I just set up to explain an approach to responsive using a jQuery plugin to manage redoing layout. I think it could work for your example quite easily. Also because it can target a container div at any depth in a web page, it could be helpful in the scenario where the layout you want to reflow is inside a 3rd party container (as long as you can run script on the page).
i am looking forward to make a welcome screen of my web app like the picture i shown..
here is a pic of example:
http://img600.imageshack.us/img600/4144/1j5h.png
The truth is i have tested many almost all the panels that GWT has to offer, and still i cannot make it.
For example:
The upper header, i made it with a DockLayoutPanel like this:
DockLayoutPanel Header = new DockLayoutPanel(unit.PCT);
header.setStyleName(¨fw¨);
header.setWidht("100%");
header.setHeight("35px");
header.addEast(ingresar,15);
header.addEast(pass,15);
header.addEast(user,15);
Using that panel, i can have all the 2 boxes and the button on the right corner of the screen, and with AUTO-WITDH.
*(even i cannot pad the red button)..
As you can check the horizontal Center Panel has a different style, i create it as Horizontal Panel, but when i do :
header.add(center_panel);
It is useless, the css from header will ofuscate the css from horizontal panel, also i cannot get the box right in the CENTER.
i have zero experience in GWT, i would like if someone can tell me the way, because i am using panels and i am not quite sure that i am using the right ones for this tasks, or the best ones.
THanks very much
Facundo
If you don't have much experience in GWT components try creating the UI with using GWT UI Binder. Its much more similar to creating a layout with html and css. Also you can use most of the html elements such as divs,spans etc.. GWT Uibinder
You can give styles on individual panels like,
for horizontal,
HorizontalPanel hp=new HorizontalPanel();
hp.setStyleName("");
I'm working on a Flex 4 application and I started customizing the interface with skins to give a whole new look.
So, I've created two scrollbar skins in Flash Catalyst (one horizontal, one vertical).
Its working great when I test the application through Catalyst so I took it and imported it on Flash Builder, copied the components and defined the new skins in my css file for the HScrollbar and VScrollbar.
The skin is working, all the buttons are ok. But, the scrollbar isnt resizing for some reason. It remains in the same height I've designed it to be regardless of the content it is bound to.
It scrolls the content in all the ways it should be but it doesnt resize and the thumb isnt getting all the way down.
Also I've noticed the following.
I have a custom component acting as a list. It extends Group and contains a Scroller. So at one place of the application the Scrollthumb is getting lower than on another place where the same custom list is used.
I also have to mention that this scroller works perfectly without a custom skin.
Anyone else having similar problems?
Okay, I know you posted this a while ago but I have been scouring the internet for days looking for why the scrollbar's thumb wasn't scaling like the default scrollbar.
There are a couple things to check, first is there a set height on your thumb's skin?
If not, and this is what I was overlooking, go to your scroller skin and at the point where you add the vertical and horizontal scrollbar set the "fixedThumbSize" property to false.
I suppose that your graphic elements are defined as every single part of the scrollbar (top arrow, bottom arrow, track, etc...): in this case you should check that the elements dimensions are not fixed... they should be in % to be able to change the dimensions based on the container.