I am trying to install Sitecore 9.1 on my PC for development. I followed this short tutorial and also referenced it against the Sitecore 9.1 Quick Installation Guide. Slor seems to have installed without issue. The following error occurs when executing the XP0-SingleDeveloper.ps1 script which is one of the last steps of the tutorial. This is the first ever Sitecore instance ever installed on this machine.
The error seems to be occurring within the SitecoreInstallFramework\2.0.0\Private\JsonConfiguration.ps1 file. I used the Install-Module SitecoreInstallFramework – Force & Update-Module SitecoreInstallFramework powershell commands multiple times to ensure my SitecoreInstallFramework is up to date. Any ideas on how to resolve this? Thanks.
The Error is about the Identity Server Package, Check you have the package on disk in $SCInstallRoot.
For 9.1 on premise:
Sitecore.IdentityServer 2.0.0 rev. * (OnPrem)_identityserver.scwdp.zip
You need to unzip the Sitecore download to found the WDP and JSON files,
In your PowerShell script check this lines:
# The path to the Identity Server Package to Deploy.
$IdentityServerPackage = (Get-ChildItem "$SCInstallRoot\Sitecore.IdentityServer 2.0.0 rev. * (OnPrem)_identityserver.scwdp.zip").FullName
Make sure you set the root folder for the WDP files, something like C:\ResourceFiles or this:
# The root folder with the license file and WDP files.
$SCInstallRoot = "C:\Sitecore\910"
Check your WDP files are not blocked after download, To "unblock" a file, right-click it in Windows Explorer, choose Properties from the context menu, click the Unblock button in the lower right-hand corner of the resulting dialog, and hit OK or Apply
Related
I am new to Version control and this is my first attempt. I am also a novice in R. just did an online course. I have installed Git and was trying to add the Version control through Rstudio Global options. The Git executable file path shows "user/bin/git" But when I go to create a Project>version control>Git- I get an error "Git was not detected on the path" I dug deeper and ran cmd in the mac terminal- which git and got the location as "/usr/local/bin/git", I also did a $ git --exec-path and got the location as "/usr/local/Cellar/git/2.30.0/libexec/git-core" I understand the executable path is somewhere else. I understand that I need to change the path but Rstudio is not allowing the changing of the path, and I am unable to edit the path to "/usr/local/Cellar/git/2.30.0/libexec/git-core" from "user/bin/git". I tried manually entering but that doesnt work, I browsed through the file s and sub folders and selected the executable file location , but it still doesnt change. Please help.
Welcome to stackoverflow: You can find a step by step support on the official support site of rstudio. Here you get detailed instructions on how to use version control with RStudio: https://support.rstudio.com/hc/en-us/articles/200532077-Version-Control-with-Git-and-SVN
So i was trying to install the XP Pen Driver for my Deco 01 v2 graphics tablet on my Linux Mint 19.2 Tina when i came to encounter the following error:
./Pentablet_Driver: /usr/lib/x86_64-linux-gnu/libQt5Core.so.5: version `Qt_5.10' not found (required by ./Pentablet_Driver)
I went on to install qt 5.10, still the same error. Others suggested to just change the path wth sudo gedit /etc/ld.so.conf.d/randomLibs.conf which didn't change a thing.
Link to drivers:
https://www.xp-pen.com/download-440.html
The manufacturer has a page describing how to set up their software on Linux with pictures. However, when following them, you end up with a folder name somewhere along the line that has spaces in it, which causes issues.
So a modified set of instructions might look like this:
Connect your XP-Pen product to the computer.
Download the Linux Beta driver from XP-Pen official website.
When the download is complete, extract the compressed folder.
Rename the extracted folder to something without spaces.
Inside the renamed folder is another compressed folder which should be extracted.
Inside the final extracted folder, ensure "Pentablet_Driver.sh" has execution permissions by right clicking on it and going to "Properties->Permissions" and verifying that "Allow executing file as program" is checked.
Open the terminal. (CTRL+ALT+T)
Type "sudo ", then drag Pentablet_Driver.sh from the file browser onto the terminal.
Type the password to complete.
Make sure that you write exactly
sudo ./Pentablet_Driver.sh
instead
sudo ./Pentablet_Driver
I had the same error until I noticed that I forgot to add .sh at the end.
I am trying to start a project using Symfony on a Mac Sierra.
I installed Symfony successfully, but I get this warning:
We selected the timezone 'UTC' for now, but please set date.timezone
to select your timezone. in
phar:///usr/local/bin/symfony/src/Symfony/Installer/NewCommand.php on
line 283 ✕ Symfony 3.2.1 was successfully installed but your system
doesn't meet its
technical requirements! Fix the following issues before executing
your Symfony application: * date.timezone setting must be set
> Set the "date.timezone" setting in php.ini* (like Europe/Paris).
I tried to change php.ini with brackets editor on the created project on folders:
project/vendor/doctrine/cache/test/travis/php.ini
project/vendor/doctrine/doctrine-cache-bundle/test/travis/php.ini
Didn't help.
As I read Symfony has built-in Apache Server.
Those php.ini files are totally unrelated to what you have to do.
Open up the Terminal and type php -i | grep "php.ini". That should reveal the location of the php.ini which is used by PHP in console mode.
XAMPP is known for using different php.ini file for the server. In order to find the the one used by the XAMPP, run a sample php file with phpinfo() from browser.
Also, note that Symonfy itself does not have the built-in server. In merely used the one PHP provided from version 5.4 and on.
Hope this helps...
I am Mac user, so , in Finder you need to go to /private/etc, find php.ini.default,
Yo need to copy that file to the desktop. To edit you need to unlock the document. Just click Unlock if asked. Rename to php.ini, set the date.timezone=Europe/YourCountry and do not forget to erase the semicolon before.And finally save it and put it back to etc.
Watch: https://www.youtube.com/watch?v=Wb6Fh-B3W-o
I wrote a .spec file on RHEL and I am building RPM using rpmbuild. I need ideas on how to handle the situation below.
My RPM creates an empty logs directory when it installs first time within the installation folder like below
/opt/MyInstallation-1.0.0-1/some executables
/opt/MyInstallation-1.0.0-1/lib/carries shared objects(.so files)
/opt/MyInstallation-1.0.0-1/config/carries some XML and custom configuration files(.xml, etc)
/opt/MyInstallation-1.0.0-1/log--->This is where application writes logs
When my RPM upgrades MyInstallation-1.0.0-1, to MyInstallation-1.0.0-2 for example, I get everything right as I wanted.
But, my question is how to preserve log files written in MyInstallation-1.0.0-1? Or to precisely copy the log directory to MyInstallation-1.0.0-2.
I believe if you tag the directory as %config, it is expected that the user will have files in there, so it will leave it alone.
I found a solution or workaround to this by hit and trial method :)
I am using rpmbuild version 4.8.0 on RHEL 6.3 x86_64. I believe it will work on other distros as well.
If you install with one name only like "MyInstallation" rather than "MyInstallation-version number-RPM Build Number" and create "logs directory as a standard directory(no additional flags on it)[See Original Question for scenario] Whenever you upgrade, you normally don't touch logs directory. RPM will leave its contents as it is. All you have to do is to ensure that you keep the line below in the install section.
%install
install --directory $RPM_BUILD_ROOT%{_prefix}/%{name}/log
Here, prefix and name are macros. That has to do nothing with underlying concept.
Regarding config files, the following is a very precise table that will help you guarding your config files. Again, this rule can't be applied on logs our applications create.
http://www-uxsup.csx.cam.ac.uk/~jw35/docs/rpm_config.html
Thanks & Regards.
I'm using a Windows 7 x64 machine with R-3.1.0. I installed the Rserve package through Rstudio.
The start of Rserve is successful with the following code in Rstudio:
library(Rserve)
Rserve()
I got the following output:
Starting Rserve...
"C:\R\R-31~1.0\library\Rserve\libs\x64\Rserve.exe"
My problem is that I couldn't locate the configuration file. Apparently it can't be "/etc/Rserv.conf".
I did come across a webpage saying that the config file is Rserv.cfg in the working directory (unless changed at compile-time). But which working directory? I have checked the working directory of the current R project as well as the Rserve library directory, but it was not there...Could someone help me with this please? Thank you.
Rserve does not automatically come with a config file, you must make one. Best steps for doing so:
Navigate to the file where you just installed Rserve.exe (C:\R\R-31~1.0\library\Rserve\libs\x64\R, based on the message you copied here)
Find Rserve.exe, Reserve_d.exe, and Rserve.dll there. Copy these files.
Navigate to where R.dll is on your computer. This is probably C:\Program Files\R\R-3.1.3\bin\x64, but may be different depending on where you installed R to.
Copy the 3 files mentioned above to this location.
Create a text file here named "Rserv.cfg" with the arguments you are looking for, such as port 6312 or library(mvoutlier). Yes, I know that this is different from the documentation, but if you start Rserve_d.exe you will see that this is the file it is looking for. I have not had success naming it anything else.
You can start Rserve by specifying the location of the config file. In R instead of just Rserve() try the following:
Rserve(args="--RS-conf C:\\folder\\Rserv.cfg")
If path is more complicated you need to massage it a little bit:
Rserve(args="--RS-conf C:\\PROGRA~1\\R\\R-215~1.2\\library\\Rserve\\Rserv.cfg")
Look in the $RHOME/bin directory
If you can't find it here is a different way to approach it:
Download Rserve at [http://rforge.net/snapshot/Rserve_.tar.gz], and save it in your desired directory
Run R CMD INSTALL Rserve_.tar.gz
This allows you to leave Rserve where you want it.
After looking at the Rserve source code and making some test I found that on Windows platform Rserve try to load the configuration file from the current working directory. Also pay attention because on Windows the file name is RServ.cfg and not Rserv.conf as documented.
The current working directory depends of the process, for example using RStudio by default it is your Documents and Settings folder:
C:\Users\[username]\Documents
but can be changed in the "Global Options" of the IDE
So you can create an "RServ.cfg" text file in that directory with your needed options and starting RServe in the usual way in RStudio
Rserve()
will load your configuration.