Why does the code below not stretch my 100px items?
The results are basically close to this:
[100px|100px|100px|.........]
That looks a lot like flex-start, not flex-stretch. Is this the intended behavior?
I'm looking for:
[...100px...100px...100px...]
.box {
display: flex;
justify-content: stretch;
width: 500px;
}
.item {
width: 100px;
}
<div class="box">
<div class="item">1</div>
<div class="item">2</div>
<div class="item">3</div>
</div>
Because - if you want the items to stretch in width - you have to allow the flex items to grow by adding flex-grow: 1;:
.box {
display: flex;
justify-content: stretch;
width: 500px;
border: 1px solid red;
}
.item {
width: 100px;
border: 1px solid green;
flex-grow: 1;
}
<div class="box">
<div class="item">1</div>
<div class="item">2</div>
<div class="item">3</div>
</div>
If you don't mean they should grow, but simply be distributed across the whole width of their container, use justify-content: space-between od ... space-around:
.box {
display: flex;
justify-content: space-around;
width: 500px;
border: 1px solid red;
}
.item {
width: 100px;
border: 1px solid green;
}
<div class="box">
<div class="item">1</div>
<div class="item">2</div>
<div class="item">3</div>
</div>
Why doesn't justify-content: stretch work?
Because in flexbox there is no such value with justify-content.
See MDN: stretch is not supported by flexible boxes (flexbox).
So your rule is invalid and the browser defaults to justify-content: flex-start, the initial setting.
Use the flex-grow property on flex items to achieve the desired effect.
Well, simply put, in order for flex-stretch to kick in, it requires combined item width to be equal or greater than the flex container. In other words, you can use 500px or even something as obscure as 10000px. And it will stretch proportionately. Usually, though... to battle this problem we use 100% on each item. This assumes 100% of the component, but again... if your container is 500px, that's what 100% will equal to. Use that or greater values.
When I was learning flex I found this simple flex generator invaluable, I think it covers the case you're talking about visually.
Yes, it is supposed to look like that for flex containers, flex-start is used instead of flex-stretch. Here is what W3C states about justify-content:stretch
The justify-content property applies along the main axis, but since
stretching in the main axis is controlled by flex, stretch behaves as
flex-start.
Also, I might be late in answering the question but MDN has also updated their page about justify-content. See the notes under stretch property MDN
An alternative way to space out items evenly is:
.class {
display: flex;
justify-content: space-between;
}
Related
I have a grid that's two columns side by side. However, there's an odd number of elements, so I would like to offset the right column so it's centered vertically against the left column.
What would be the best way to do that using grid?
Here's an example how i want the layout to look:
Here's an example: https://codepen.io/patricktm/pen/JjMzQWj
body {
max-width: 1000px;
margin: auto;
}
.grid-item {
background-color: #ccc;
border: 1px solid;
height: 200px;
}
.grid {
display: grid;
grid-template-columns: repeat(2, 1fr);
gap: 1em;
}
<body>
<div class='grid'>
<div class='grid-item'>1</div>
<div class='grid-item'>2</div>
<div class='grid-item'>3</div>
<div class='grid-item'>4</div>
<div class='grid-item'>5</div>
<div class='grid-item'>6</div>
<div class='grid-item'>7</div>
</div>
</body>
This layout isn't really feasible with Grid because there are fix row tracks that prevent the free flow of items across the column.
You're basically asking the top item in the second column to somehow space itself down in the first row track and cross into the second track, pushing down the other items along the way.
Grid doesn't work this way. The matter is discussed in detail in this post:
Aligning grid items across the entire row/column (like flex items can)
One simple way to make this layout work uses flexbox, which has no column or row tracks crossing through the flex lines. (You'll have to tweak it though, as my simple example will only work on taller screens. On shorter screens additional columns will be generated.)
.grid {
display: flex;
flex-direction: column;
flex-wrap: wrap;
justify-content: center; /* key */
height: 100vh;
gap: 1em;
}
.grid-item {
background-color: #ccc;
border: 1px solid;
height: 21%; /* prevents a 5th item in the column */
}
body {
max-width: 1000px;
margin: auto;
}
<div class='grid'>
<div class='grid-item'>1</div>
<div class='grid-item'>2</div>
<div class='grid-item'>3</div>
<div class='grid-item'>4</div>
<div class='grid-item'>5</div>
<div class='grid-item'>6</div>
<div class='grid-item'>7</div>
</div>
I have three elements I'm trying to align in my layout.
First, I have a div for feedback, and then a search input, and then a div element for suggestions.
I want the first and last element to have a width of 20%, and the search input to have a width of 60%. Using Flexbox I achieve what I want.
But there's a feature that grows all the divs to the highest element. This means that when search results pop up, the feedback and suggestion elements grow in height with the search div resulting in a messed up layout.
Is there a trick to not grow the divs with the highest element? Just make the divs (#feedback and #suggestions) have the height of the content in them?
#container_add_movies {
display: flex;
}
#container_add_movies #feedback {
width: 20%;
background-color: green;
}
#container_add_movies #search {
width: 60%;
background-color: red;
}
#container_add_movies #suggestions {
width: 20%;
background-color: yellow;
}
<div id='container_add_movies'>
<div id='feedback'>
Feedback
</div>
<div id='search'>
Search
<br>Search
<br>Search
<br>Search
<br>Search
<br>Search
<br>Search
<br>Search
<br>Search
<br>Search
<br>
</div>
<div id='suggestions'>
Suggestions
</div>
</div>
http://codepen.io/alucardu/pen/PPjRzY
You're encountering the flex equal height columns feature.
An initial setting of a flex container is align-items: stretch.
This means that flex items automatically expand the full length of the cross axis of the container. In a row-direction container, the cross axis is vertical (height).
The tallest item sets the height for all siblings. As the tallest item expands, its siblings follow along. Hence, equal height for all items.
To override this default setting, add align-items: flex-start to the flex container:
#container_add_movies {
display: flex;
align-items: flex-start;
}
#container_add_movies {
display: flex;
align-items: flex-start; /* NEW */
}
#container_add_movies #feedback {
width: 20%;
background-color: green;
display: block;
}
#container_add_movies #search {
width: 60%;
background-color: red;
}
#container_add_movies #suggestions {
width: 20%;
background-color: yellow;
}
<div id='container_add_movies'>
<div id='feedback'>Feedback</div>
<div id='search'>
Search<br>Search<br>Search<br>Search<br>Search<br> Search
<br>Search<br>Search<br>Search<br>Search<br>
</div>
<div id='suggestions'>Suggestions</div>
</div>
... or align-self: flex-start to the flex items:
#feedback {
align-self: flex-start;
width: 20%;
background-color: green;
}
#suggestions {
align-self: flex-start;
width: 20%;
background-color: yellow;
}
#container_add_movies {
display: flex;
}
#container_add_movies #search {
width: 60%;
background-color: red;
}
#feedback {
align-self: flex-start; /* NEW */
width: 20%;
background-color: green;
}
#suggestions {
align-self: flex-start; /* NEW */
width: 20%;
background-color: yellow;
}
<div id='container_add_movies'>
<div id='feedback'>Feedback</div>
<div id='search'>
Search<br>Search<br>Search<br>Search<br>Search<br> Search
<br>Search<br>Search<br>Search<br>Search<br>
</div>
<div id='suggestions'>Suggestions</div>
</div>
align-items sets the default value of align-self. With align-self you can override the default on individual items.
More details in the spec:
8.3. Cross-axis Alignment: the align-items and align-self
properties
Flex items can be aligned in the cross axis of the current line of the
flex container, similar to justify-content but in the perpendicular
direction.
align-items sets the default alignment for all of the flex
container’s items, including anonymous flex items.
align-self allows this default alignment to be overridden for
individual flex items.
A bit of history
Since the beginnings of CSS, there have been two layout challenges that have regularly frustrated, perplexed, and annoyed front-end developers:
How to center things, especially vertically, and
How to create equal height columns (tables aside)
Today, with the advent of flexbox, these problems are over.
Centering things has never been easier:
#container {
display: flex;
justify-content: center; /* center flex items along the main axis */
align-items: center; /* center flex items along the cross axis */
}
Simple. Easy. Efficient. The craziness is over.
In terms of equal height columns, flexbox also excels: It does this by default.
#container {
display: flex;
flex-direction: row; /* not even necessary; default rule */
align-items: stretch; /* not even necessary; default rule */
}
The align-items: stretch rule tells flex items to expand along the cross-axis as much as possible. Hence, in a row-direction container all items can be equal height. More craziness tamed by flexbox.
From one popular answer for equal height columns:
Give overflow: hidden to the container and large (and equal)
negative margin and positive padding to columns. Note that this
method has some problems, e.g. anchor links won't work within your
layout.
Now that's a hack!
The pendulum is now beginning to swing the other way: Designers are asking how to TURN OFF equal height columns.
You can add align-items: flex-start to your #container_add_movies. Here's an example
to have the unequal columns in bootstrap 4, first of all it needs to know how it is making it equal heights of the columns,so the reason is the
align-items: stretch
to remove this property it need to add align-items: flex-start so for this I have added the class="align-items-start" and the issue is fixed,
Setting the child element that was causing the problem to flex:none did the trick for me.
This question already has answers here:
How to align groups of buttons on single row with Flex only?
(2 answers)
How to Center and Right-align on a row with CSS Flex only
(3 answers)
Closed 5 years ago.
I have a codepen of my header. How can I align the image to the right of my div?
I have tried justify-content: flex-end and align-items: flex-end
With the given code sample, and to right align the image in its parent, the align-items: flex-end is a flex container property and won't have any effect in the right rule.
The appropriate property for a flex item would be align-self, though as the direction is row, this will still not work since align-* properties affect the cross axis (vertically).
A simple solution is to remove align-items: flex-end from the right rule and instead make the div-container--right a flex container, use justify-content: flex-end to push its child, the image, to the right. That will work with the rest of the rules, and your original layout kept.
Stack snippet
.main-container{
background-color: white;
flex: 1;
display: flex;
flex-direction: row;
}
.left{
flex: 2;
background-color:white;
}
.right {
flex: 2;
/*align-items: flex-end; removed */
}
.div-container {
background-color: #90C3D4;
height: 100px;
}
.div-container--left {
border-bottom-left-radius: 10px;
padding-left: 10px;
margin-left: 10px;
}
.div-container--right {
border-bottom-right-radius: 10px;
padding-right: 10px;
margin-right: 10px;
display: flex; /* added */
justify-content: flex-end; /* changed */
align-items: flex-start; /* added, to avoid image to stretch */
}
<div class='main-container'>
<div class="left">
<div class='div-container div-container--left'>
<img src="http://www.mharrisweb.co.uk/images/calendarIcon.png" width="100" />
</div>
<div class='picker-container'>
</div>
</div>
<div class="right">
<div class='div-container div-container--right'>
<img src="http://www.mharrisweb.co.uk/images/logoGreen.png" width="100" />
</div>
<div class='picker-container'>
image above align right
</div>
</div>
</div>
Besides the above, here is a few more ways to align flex items:
How to align groups of buttons on single row with Flex only?
How to Center and Right-align on a row with CSS Flex only
Center and right align flexbox elements
Right align out the Float Property
The way I see it you have 2 options.
remove flex:2 from the .right class and add margin-left:auto;
to the .right class add display: flex, align-items: flex-end; flex-direction: column (you also have that text that would need to be moved inside a class wrapper as the immediate child of the .right class.
I prefer option 1.
An additional option to the good answer from Sten is to use absolute position. Example:
.right{
position:absolute;
right:0;
}
I have three elements I'm trying to align in my layout.
First, I have a div for feedback, and then a search input, and then a div element for suggestions.
I want the first and last element to have a width of 20%, and the search input to have a width of 60%. Using Flexbox I achieve what I want.
But there's a feature that grows all the divs to the highest element. This means that when search results pop up, the feedback and suggestion elements grow in height with the search div resulting in a messed up layout.
Is there a trick to not grow the divs with the highest element? Just make the divs (#feedback and #suggestions) have the height of the content in them?
#container_add_movies {
display: flex;
}
#container_add_movies #feedback {
width: 20%;
background-color: green;
}
#container_add_movies #search {
width: 60%;
background-color: red;
}
#container_add_movies #suggestions {
width: 20%;
background-color: yellow;
}
<div id='container_add_movies'>
<div id='feedback'>
Feedback
</div>
<div id='search'>
Search
<br>Search
<br>Search
<br>Search
<br>Search
<br>Search
<br>Search
<br>Search
<br>Search
<br>Search
<br>
</div>
<div id='suggestions'>
Suggestions
</div>
</div>
http://codepen.io/alucardu/pen/PPjRzY
You're encountering the flex equal height columns feature.
An initial setting of a flex container is align-items: stretch.
This means that flex items automatically expand the full length of the cross axis of the container. In a row-direction container, the cross axis is vertical (height).
The tallest item sets the height for all siblings. As the tallest item expands, its siblings follow along. Hence, equal height for all items.
To override this default setting, add align-items: flex-start to the flex container:
#container_add_movies {
display: flex;
align-items: flex-start;
}
#container_add_movies {
display: flex;
align-items: flex-start; /* NEW */
}
#container_add_movies #feedback {
width: 20%;
background-color: green;
display: block;
}
#container_add_movies #search {
width: 60%;
background-color: red;
}
#container_add_movies #suggestions {
width: 20%;
background-color: yellow;
}
<div id='container_add_movies'>
<div id='feedback'>Feedback</div>
<div id='search'>
Search<br>Search<br>Search<br>Search<br>Search<br> Search
<br>Search<br>Search<br>Search<br>Search<br>
</div>
<div id='suggestions'>Suggestions</div>
</div>
... or align-self: flex-start to the flex items:
#feedback {
align-self: flex-start;
width: 20%;
background-color: green;
}
#suggestions {
align-self: flex-start;
width: 20%;
background-color: yellow;
}
#container_add_movies {
display: flex;
}
#container_add_movies #search {
width: 60%;
background-color: red;
}
#feedback {
align-self: flex-start; /* NEW */
width: 20%;
background-color: green;
}
#suggestions {
align-self: flex-start; /* NEW */
width: 20%;
background-color: yellow;
}
<div id='container_add_movies'>
<div id='feedback'>Feedback</div>
<div id='search'>
Search<br>Search<br>Search<br>Search<br>Search<br> Search
<br>Search<br>Search<br>Search<br>Search<br>
</div>
<div id='suggestions'>Suggestions</div>
</div>
align-items sets the default value of align-self. With align-self you can override the default on individual items.
More details in the spec:
8.3. Cross-axis Alignment: the align-items and align-self
properties
Flex items can be aligned in the cross axis of the current line of the
flex container, similar to justify-content but in the perpendicular
direction.
align-items sets the default alignment for all of the flex
container’s items, including anonymous flex items.
align-self allows this default alignment to be overridden for
individual flex items.
A bit of history
Since the beginnings of CSS, there have been two layout challenges that have regularly frustrated, perplexed, and annoyed front-end developers:
How to center things, especially vertically, and
How to create equal height columns (tables aside)
Today, with the advent of flexbox, these problems are over.
Centering things has never been easier:
#container {
display: flex;
justify-content: center; /* center flex items along the main axis */
align-items: center; /* center flex items along the cross axis */
}
Simple. Easy. Efficient. The craziness is over.
In terms of equal height columns, flexbox also excels: It does this by default.
#container {
display: flex;
flex-direction: row; /* not even necessary; default rule */
align-items: stretch; /* not even necessary; default rule */
}
The align-items: stretch rule tells flex items to expand along the cross-axis as much as possible. Hence, in a row-direction container all items can be equal height. More craziness tamed by flexbox.
From one popular answer for equal height columns:
Give overflow: hidden to the container and large (and equal)
negative margin and positive padding to columns. Note that this
method has some problems, e.g. anchor links won't work within your
layout.
Now that's a hack!
The pendulum is now beginning to swing the other way: Designers are asking how to TURN OFF equal height columns.
You can add align-items: flex-start to your #container_add_movies. Here's an example
to have the unequal columns in bootstrap 4, first of all it needs to know how it is making it equal heights of the columns,so the reason is the
align-items: stretch
to remove this property it need to add align-items: flex-start so for this I have added the class="align-items-start" and the issue is fixed,
Setting the child element that was causing the problem to flex:none did the trick for me.
I'm in the process of updating an old inline-block-based grid model I have to a newer Flexbox one I created. Everything has worked fine, apart from one little snag, which has become a bit of a dealbreaker:
I have a bunch of CSS-controlled sliders; so there's a containing wrapper with 100% width, and inside is another div: its width is also 100%, but its white-space is set to nowrap. Using inline-block, this meant that the internal divs (which were also set to 100% width) wouldn't be bound by their parents' constraints and wrap onto the next line - they'd just carry on flowing out of the box. This is exactly what I wanted. However, I cannot get this to work at all with flexbox. For reference, here's an image:
And for reference, here's a jsFiddle of the thing working with inline-block: http://jsfiddle.net/5zzvqx4b/
...and not working with Flexbox: http://jsfiddle.net/5zzvqx4b/1/
I've tried all kinds of variations with flex, flex-basis, flex-wrap, flex-grow, etc. but for the life of me I can't get this to work.
Note that I can force it to do what I want in a hacky, inflexible way by setting the .boxcontainer width to 200%. That works for this single example, but in some cases I won't know beforehand how many child boxes there will be, and I'd rather not resort to inline styling on each element if possible.
To prevent the flex items from shrinking, set the flex shrink factor to 0:
The flex shrink factor determines how much the flex item will
shrink relative to the rest of the flex items in the flex
container when negative free space is distributed. When omitted, it is
set to 1.
.boxcontainer .box {
flex-shrink: 0;
}
* {
box-sizing: border-box;
}
.wrapper {
width: 200px;
background-color: #EEEEEE;
border: 2px solid #DDDDDD;
padding: 1rem;
}
.boxcontainer {
position: relative;
left: 0;
border: 2px solid #BDC3C7;
transition: all 0.4s ease;
display: flex;
}
.boxcontainer .box {
width: 100%;
padding: 1rem;
flex-shrink: 0;
}
.boxcontainer .box:first-child {
background-color: #F47983;
}
.boxcontainer .box:nth-child(2) {
background-color: #FABCC1;
}
#slidetrigger:checked ~ .wrapper .boxcontainer {
left: -100%;
}
#overflowtrigger:checked ~ .wrapper {
overflow: hidden;
}
<input type="checkbox" id="overflowtrigger" />
<label for="overflowtrigger">Hide overflow</label><br />
<input type="checkbox" id="slidetrigger" />
<label for="slidetrigger">Slide!</label>
<div class="wrapper">
<div class="boxcontainer">
<div class="box">
First bunch of content.
</div>
<div class="box">
Second load of content.
</div>
</div>
</div>
You can use the shorthand flex property and set it to
flex: 0 0 100%;
That's flex-grow, flex-shrink, and flex-basis in one line. Flex shrink was described above, flex grow is the opposite, and flex basis is the size of the container.
In my case, just using flex-shrink: 0 didn't work. But adding flex-grow: 1 to it worked.
.item {
flex-shrink: 0;
flex-grow: 1;
}
Set the flex-direction: column
You're trying to stack the items in a column rather than a row.
{
display: flex;
justify-content: center;
align-items: center;
flex-direction: column;
}