I am new to OMNET++ (version 5.4) simulator and i have been trying to do some tutorials to learn it. Now I am working on doing an example Ethernet connections as in the picture.
and I have the following configuration in my ´net.ini´ file
[General]
# Configurator settings
*.net_configurator.dumpAddresses = true
*.net_configurator.dumpTopology = true
*.net_configurator.dumpLinks = true
*.net_configurator.dumpRoutes = true
# Routing settings
**.networkLayer.configurator.networkConfiguratorModule = ""
*.*.networkLayer.arpType = "GlobalARP"
*.*.routingTable.netmaskRoutes = ""
# Visualizer settings
*.visualizer.interfaceTableVisualizer.displayInterfaceTables = true
*.visualizer.interfaceTableVisualizer.nodeFilter = "not (*switch* or *Switch* or *AP*)"
[Config Step1]
network = net
description = "Fully automatic IP address assignment"
when I lunch the simulation i don't see any IP assigning . what could be the problem?
Change the line:
**.networkLayer.configurator.networkConfiguratorModule = ""
into:
**.networkLayer.configurator.networkConfiguratorModule = "net_configurator"
Other way is to do:
Change the name of IPv4NetworkConfigurator object to configurator.
Remove the line:
**.networkLayer.configurator.networkConfiguratorModule = ""
Related
I am trying to access a shared folder using unc path on server2 from clientX via WinRS to server1.
clientX -> server1 -> server2
My issue is basically the same as Can WinRS access UNC paths?
However, the solution there does not work for me although I followed all available instructions regarding WinRM and CredSSP configurations on clientX and server1 and it appears that everything was done as intended.
hostname of clientX is 'clientX' (acquired from cmd command 'hostname')
full computer name of clientX is 'clientX' (acquired from control panel > system)
user domain of clientX is 'CLIENTX' (acquired from cmd command 'echo %userdomain%')
hostname of server1 is 'server1' (acquired from cmd command 'hostname')
full computer name of server1 is 'server1' (acquired from control panel > system)
user domain of server1 is 'SERVER1' (acquired from cmd command 'echo %userdomain%')
the unc path on server2 is \SERVER2\sharedF\test
on server1, I can successfully run the command:
dir \\SERVER2\sharedF\test
on clientX, I can successfully run the command:
dir \\SERVER2\sharedF\test
aswell (as it also is connected to server2 directly).
on clientX, I can successfully run the command:
winrs.exe -r:http://SERVER1:5985 -u:adminOnserver1 -p:pass4server1 "dir c:"
on clientX, I fail to run the command:
winrs.exe -r:http://SERVER1:5985 -u:adminOnserver1 -p:pass4server1 "dir \\SERVER2\sharedF\test"
as I get the error message "access is denied". And that is the problem.
on clientX, the power shell command "Get-WSManCredSSP" returns:
The machine is configured to allow delegating fresh credentials to the following target(s): wsman/SERVER1
This computer is not configured to receive credentials from a remote client computer.
on clientX, the cmd command "winrm get winrm/config" returns:
Config
MaxEnvelopeSizekb = 500
MaxTimeoutms = 60000
MaxBatchItems = 32000
MaxProviderRequests = 4294967295
Client
NetworkDelayms = 5000
URLPrefix = wsman
AllowUnencrypted = true
Auth
Basic = true
Digest = true
Kerberos = true
Negotiate = true
Certificate = true
CredSSP = true
DefaultPorts
HTTP = 5985
HTTPS = 5986
TrustedHosts = 200.0.0.145,CLIENTX,200.0.0.159,SERVER1
Service
RootSDDL = O:NSG:BAD:P(A;;GA;;;BA)(A;;GR;;;IU)S:P(AU;FA;GA;;;WD)(AU;SA;GXGW;;;WD)
MaxConcurrentOperations = 4294967295
MaxConcurrentOperationsPerUser = 1500
EnumerationTimeoutms = 240000
MaxConnections = 300
MaxPacketRetrievalTimeSeconds = 120
AllowUnencrypted = false
Auth
Basic = false
Kerberos = true
Negotiate = true
Certificate = false
CredSSP = false
CbtHardeningLevel = Relaxed
DefaultPorts
HTTP = 5985
HTTPS = 5986
IPv4Filter = *
IPv6Filter = *
EnableCompatibilityHttpListener = false
EnableCompatibilityHttpsListener = false
CertificateThumbprint
AllowRemoteAccess = true
Winrs
AllowRemoteShellAccess = true
IdleTimeout = 7200000
MaxConcurrentUsers = 2147483647
MaxShellRunTime = 2147483647
MaxProcessesPerShell = 2147483647
MaxMemoryPerShellMB = 2147483647
MaxShellsPerUser = 2147483647
on server1, the power shell command "Get-WSManCredSSP" returns:
The machine is not configured to allow delegating fresh credentials.
This computer is configured to receive credentials from a remote client computer.
on server1, the cmd command "winrm get winrm/config" returns:
Config
MaxEnvelopeSizekb = 500
MaxTimeoutms = 60000
MaxBatchItems = 32000
MaxProviderRequests = 4294967295
Client
NetworkDelayms = 5000
URLPrefix = wsman
AllowUnencrypted = true
Auth
Basic = true
Digest = true
Kerberos = true
Negotiate = true
Certificate = true
CredSSP = true
DefaultPorts
HTTP = 5985
HTTPS = 5986
TrustedHosts = 200.0.0.145,CLIENTX,200.0.0.159,SERVER1
Service
RootSDDL = O:NSG:BAD:P(A;;GA;;;BA)(A;;GR;;;IU)S:P(AU;FA;GA;;;WD)(AU;SA;GXGW;;;WD)
MaxConcurrentOperations = 4294967295
MaxConcurrentOperationsPerUser = 1500
EnumerationTimeoutms = 240000
MaxConnections = 300
MaxPacketRetrievalTimeSeconds = 120
AllowUnencrypted = false
Auth
Basic = false
Kerberos = true
Negotiate = true
Certificate = false
CredSSP = true
CbtHardeningLevel = Relaxed
DefaultPorts
HTTP = 5985
HTTPS = 5986
IPv4Filter = *
IPv6Filter = *
EnableCompatibilityHttpListener = false
EnableCompatibilityHttpsListener = false
CertificateThumbprint
AllowRemoteAccess = true
Winrs
AllowRemoteShellAccess = true
IdleTimeout = 7200000
MaxConcurrentUsers = 2147483647
MaxShellRunTime = 2147483647
MaxProcessesPerShell = 2147483647
MaxMemoryPerShellMB = 2147483647
MaxShellsPerUser = 2147483647
on server1, the cmd command "winrm e winrm/config/listener" returns:
Listener
Address = *
Transport = HTTP
Port = 5985
Hostname
Enabled = true
URLPrefix = wsman
CertificateThumbprint
ListeningOn = 127.0.0.1, 169.254.229.41, 200.0.0.159, ::1, fe80::5465:9195:eabb:b7e7%11, fe80::c056:f6db:8f7f:e529%9
Did I do anything wrong? Any ideas?
I followed the common, basic instructions from microsoft and the solution from Can WinRS access UNC paths? and used commands like "Enable-WSManCredSSP -Role "Server"" , "Enable-WSManCredSSP -Role Client -DelegateComputer SERVER1", "winrm quickconfig".
The CPU is a Ryzen 7 4700U with Radeon RX Vega 7 graphics.
NixOS has been installed. Boot media is still available.
X.0.log shows that it can't find a display.
It is difficult to get the logs off the machine but I will be happy to get as many as possible in the morning.
Appreciate any help despite the lack of information, this sort of issue is out of my area of knowledge.
Attaching the continence of config.nix and hw-config.nix:
# Edit this configuration file to define what should be installed on
# your system. Help is available in the configuration.nix(5) man page
# and in the NixOS manual (accessible by running ‘nixos-help’).
{ config, pkgs, ... }:
{
imports =
[ # Include the results of the hardware scan.
./hardware-configuration.nix
];
# Use the systemd-boot EFI boot loader.
boot.loader.systemd-boot.enable = true;
boot.loader.efi.canTouchEfiVariables = true;
networking.hostName = "MrNixosLaptop"; # Define your hostname.
# networking.wireless.enable = true; # Enables wireless support via wpa_supplicant.
networking.networkmanager.enable = true;
# Set your time zone.
time.timeZone = "Australia/Brisbane";
# The global useDHCP flag is deprecated, therefore explicitly set to false here.
# Per-interface useDHCP will be mandatory in the future, so this generated config
# replicates the default behaviour.
networking.useDHCP = false;
networking.interfaces.wlp2s0.useDHCP = true;
# Configure network proxy if necessary
# networking.proxy.default = "http://user:password#proxy:port/";
# networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
# Select internationalisation properties.
# i18n.defaultLocale = "en_US.UTF-8";
# console = {
# font = "Lat2-Terminus16";
# keyMap = "us";
# };
# Enable the Plasma 5 Desktop Environment.
services.xserver.enable = true;
services.xserver.windowManager.leftwm.enable = true;
# services.xserver.displayManager.sddm.enable = true;
# services.xserver.desktopManager.plasma5.enable = true;
# Configure keymap in X11
# services.xserver.layout = "us";
# services.xserver.xkbOptions = "eurosign:e";
# Enable CUPS to print documents.
# services.printing.enable = true;
# Enable sound.
sound.enable = true;
hardware.pulseaudio.enable = true;
# Enable touchpad support (enabled default in most desktopManager).
services.xserver.libinput.enable = true;
# Define a user account. Don't forget to set a password with ‘passwd’.
users.users.daxx367 = {
isNormalUser = true;
extraGroups = [ "wheel" ]; # Enable ‘sudo’ for the user.
};
# List packages installed in system profile. To search, run:
# $ nix search wget
environment.systemPackages = with pkgs; [
wget
vim
firefox
networkmanager
];
# Some programs need SUID wrappers, can be configured further or are
# started in user sessions.
# programs.mtr.enable = true;
# programs.gnupg.agent = {
# enable = true;
# enableSSHSupport = true;
# };
# List services that you want to enable:
# Enable the OpenSSH daemon.
# services.openssh.enable = true;
# Open ports in the firewall.
# networking.firewall.allowedTCPPorts = [ ... ];
# networking.firewall.allowedUDPPorts = [ ... ];
# Or disable the firewall altogether.
# networking.firewall.enable = false;
# This value determines the NixOS release from which the default
# settings for stateful data, like file locations and database versions
# on your system were taken. It‘s perfectly fine and recommended to leave
# this value at the release version of the first install of this system.
# Before changing this value read the documentation for this option
# (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
system.stateVersion = "20.09"; # Did you read the comment?
}
# Do not modify this file! It was generated by ‘nixos-generate-config’
# and may be overwritten by future invocations. Please make changes
# to /etc/nixos/configuration.nix instead.
{ config, lib, pkgs, modulesPath, ... }:
{
imports =
[ (modulesPath + "/installer/scan/not-detected.nix")
];
boot.initrd.availableKernelModules = [ "nvme" "xhci_pci" "ahci" "usb_storage" "sd_mod" "rtsx_pci_sdmmc" ];
boot.initrd.kernelModules = [ ];
boot.kernelModules = [ "kvm-amd" ];
boot.extraModulePackages = [ ];
fileSystems."/" =
{ device = "/dev/disk/by-uuid/6caa67f7-3893-4a36-ac2c-ea841edfa25a";
fsType = "ext4";
};
fileSystems."/boot" =
{ device = "/dev/disk/by-uuid/1D27-EC4B";
fsType = "vfat";
};
swapDevices =
[ { device = "/dev/disk/by-uuid/320bd3ad-b4c8-4d4a-812e-e6de23c5393a"; }
];
}
I managed to solve it with the help of Gytis on the the Nix discord.
I added this to my config.nix:
hardware = {
enableRedistributableFirmware = true;
enableAllFirmware = true;
opengl = {
enable = true;
driSupport32Bit = config.hardware.opengl.enable;
};
};
That didn't work so then I added this, but I didn't remove the above so it might be important.
boot.kernelPackages = pkgs.linuxPackages_latest;
Good luck to anyone with this issue.
I'm trying to write a fake access point script in ruby; the script is below:
require 'packetgen'
def fake_ap
print 'Making a fake ap...'
while true
bssid = 'aa:aa:aa:aa:aa:aa'
iface = 'mon0'
ssid = 'NoWifi'
broadcast = 'ff:ff:ff:ff:ff:ff'
pkt = PacketGen.gen('RadioTap')
pkt.add('Dot11::Management', mac1: broadcast, mac2: bssid, mac3: bssid)
pkt.add('Dot11::Beacon', cap: '0x1114')
pkt.dot11_beacon.add_element(type: 'SSID', value: ssid)
pkt.dot11_beacon.add_element(type: 'Rates', value: "\x82\x84\x8b\x96\x24\x30\x48\x6c")
pkt.dot11_beacon.add_element(type: 'DSset', value: "\x06")
pkt.dot11_beacon.add_element(type: 'TIM', value: "\x00\x01 \0x00\0x00")
pkt.calc
pkt.to_w(iface)
end
end
fake_ap
Hexdump of packet
The program is supposed to send beacon frames; I ran the program (with my wireless card on monitor mode) however it doesn't show up as an access point. It there a problem with my code or something else. The docs for the packetgen library are here. Thanks!
I have opened an RDP session using AutoIt. Here is the code:
$host = "" ; <---- IP
$hGUI = GUICreate("Terminal Serveur", 952, 675, -1, -1, $WS_OVERLAPPEDWINDOW + $WS_CLIPSIBLINGS + $WS_CLIPCHILDREN)
$oRDP = ObjCreate("MsTscAx.MsTscAx.2")
$oRDP_Ctrl = GUICtrlCreateObj($oRDP, 64, 44, 800, 600)
GUICtrlSetResizing(-1, $GUI_DOCKALL)
GUICtrlSetStyle($oRDP_Ctrl , $WS_VISIBLE)
$oRDP.DesktopWidth = 800
$oRDP.DesktopHeight = 600
$oRDP.Fullscreen = False
$oRDP.ColorDepth = 16
$oRDP.AdvancedSettings3.SmartSizing = True
$oRDP.Server = $host
$oRDP.UserName = "" ; <--- Username
$oRDP.Domain = ""
$oRDP.AdvancedSettings2.ClearTextPassword = "" ; <--- Password
$oRDP.ConnectingText = "Connecting to " & $host
$oRDP.DisconnectedText = "Disconnected from " & $host
$oRDP.StartConnected = True
$oRDP.Connect()
$oShel = ObjCreate("shell.application")
$oShel_Ctrl = GUICtrlCreateObj($oShel, 64, 44, 800, 600)
GUICtrlSetStyle($oShel_Ctrl , $WS_VISIBLE)
GUISetState(#SW_SHOW, $hGUI)
Send ("#r") ; !!
While 1
$nMsg = GUIGetMsg()
Switch $nMsg
Case $GUI_EVENT_CLOSE
$oRDP.Disconnect()
Exit
EndSwitch
WEnd
Now, I want to launch an application in the RDP session. I tried " Send(#r) " in order to send the path with a function like SendKeys but this command is execute on my computer and not on the remote computer.
How can I do please?
Send alt + home. This open the windows search in the rdp session, which you can then send it text e.g. send("notepad")
send({enter})
Update:
A much simpler alternative:
Change the Remote Desktop Connection Settings (not in the control
code, but in the usual windows shorcut. But it seems that could be done in the AutoIt code with the keyboardhook setting keyboardhook setting ) .
Look for the Options button, in the window when launching remote desktop.
On the Local Resources Tab select Windows key combinations are applied in full-screen mode only.
Change this line in your code:
$oRDP.Fullscreen = True
Include a pause to ensure the control has been loaded
Sleep(5000)
Send ("#r")
Previous answer:
Let my suggest a workaround not very 'elegant' but should work (tested ok):
In the remote desktop make a shorcut to the Windows Virtual Keyword (On-Screen Keyboard or OSK)
Find the position of the shorcut icon
In your code send a double click at this position to start the on-screen keyboard
Then send clicks to the positions of the desired keys
Something like this:
Sleep(5000)
MouseClick("left",512,191,2) ;start virtual keyword
Sleep(1000)
MouseClick("left",553,807,1) ;click
Sleep(100)
MouseClick("left",633,740,1)
Sleep(1000)
Send("notepad")
Sleep(1000)
Send("{ENTER}")
(Aside note: For any executable with a shortcut on the remote desktop simply send double click, without the need of the virtual keyboard)
I have written a sample KMDF driver. I dont know if I did every thing right but have seen KMDF driver printing Debug message in DebugView utility - when I added this driver as new hardware. It also showed up as "Sample Device" under device manager.
Now I want to write a sample client that could call this Driver - so I can establish a connection between driver and client. I read that we need to use 'CreateFile' and 'DEviceIOControl' etc. But I am not able to get a start on it.
Can you please guide me around creating sample client to access the sample KMDF driver ?
My INF file for the driver looks like this :-
***My INF FILE****
; myshelldriver.INF
; Windows installation file for installing the myshelldriver driver
; Copyright (c) Microsoft Corporation All rights Reserved
;
; Installation Notes:
;
; Using Devcon: Type "devcon install myshelldriver.inf myshelldriver" to install
;
[Version]
Signature="$WINDOWS NT$"
Class=Sample
ClassGuid={78A1C341-4539-11d3-B88D-00C04FAD5171}
Provider=%MSFT%
DriverVer=09/24/2012,1.0
CatalogFile=myshell.cat
[DestinationDirs]
DefaultDestDir = 12
[ClassInstall32]
Addreg=SampleClassReg
[SampleClassReg]
HKR,,,0,%ClassName%
HKR,,Icon,,-5
[DiskCopyfiles]
wdfmyshelldriver.sys
[SourceDisksNames]
1=%InstDisk%,
[SourceDisksFiles]
Wdfmyshelldriver.sys=1
[Manufacturer]
%MSFT% = DiskDevice,NTAMD64
; For Win2K
[DiskDevice]
%DiskDevDesc% = DiskInstall, wdfmyshelldriver
; For XP and later
[DiskDevice.NTAMD64]
%DiskDevDesc% = DiskInstall, wdfmyshelldriver
[DiskInstall.NT]
CopyFiles = DiskCopyfiles
;;specify that this is the installation
;;for nt based systems.
[DriverInstall.ntx86]
DriverVer=09/24/2012,1.0
CopyFiles=DriverCopyFiles
[DiskInstall.NT.Services]
AddService = wdfmyshelldriver, %SPSVCINST_ASSOCSERVICE%, DiskServiceInst
[DiskServiceInst]
ServiceType = %SERVICE_KERNEL_DRIVER%
StartType = %SERVICE_DEMAND_START%
ErrorControl = %SERVICE_ERROR_NORMAL%
DisplayName = %DiskServiceDesc%
ServiceBinary = %12%\Wdfmyshelldriver.sys
AddReg = DiskAddReg
[DiskAddReg]
HKR, "Parameters", "BreakOnEntry", %REG_DWORD%, 0x00000000
HKR, "Parameters", "DiskSize", %REG_DWORD%, 0x00100000
HKR, "Parameters", "DriveLetter", %REG_SZ%, "R:"
HKR, "Parameters", "RootDirEntries", %REG_DWORD%, 0x00000200
HKR, "Parameters", "SectorsPerCluster", %REG_DWORD%, 0x00000002
[Strings]
MSFT = "Microsoft"
ClassName = "My Shell Device"
DiskDevDesc = "WDF My Shell Driver"
DiskServiceDesc = "myshelldriver Driver"
InstDisk = "myshelldriver Install Disk"
;*******************************************
;Handy macro substitutions (non-localizable)
SPSVCINST_ASSOCSERVICE = 0x00000002
SERVICE_KERNEL_DRIVER = 1
SERVICE_DEMAND_START = 3
SERVICE_ERROR_NORMAL = 1
REG_DWORD = 0x00010001
REG_SZ = 0x00000000
**** END OF INF FILE***
There are many relevant samples in the WDK. For example, take a look at KMDF Echo sample.
First you will need to name your object.
Second you will need to do at least one of the following:
Create a Symbolic link in the \GLOBAL??\
Register a Device Interface.
Option 1 will let you do the simple
CreateFile("\\\\.\\<device_name>, ...);
Option 2 and you will need to use the Setup DI Api routines to find your device to open it.