I am trying to understand the bits which are structured in an IPv4 or CIDR. Reading through RFC documentation I understood that the IP addresses began as 4 octets of made up of 32-bits. I am confused at what a network mask of 255.255.0.0 means?
Even more over if we look at an IP associated with cnn.com
151.101.65.67
Are the individual bits of the IP listed above
01101001.01000001.00110101.00110111
?
Or am I not thinking about this correctly. The network mask has 255.255.0.0 as an example but how would I look at the actuals bits represented in the octets?
The IPv4 address 151.101.65.67 corresponds to the number that can be represented as hexadecimal 0x97654143 or decimal 2539995459. In binary it would be 0b10010111011001010100000101000011. It is shown as 151.101.65.67 for the sake of human readers (decimal 151 = hexadecimal 97 = binary 10010111, etc., notice that you can simply concatenate the hexadecimal or binary representations to form the full number, but not the decimal!)
A network mask determines which part of an IP address corresponds to the network and which part is a host. It "shows" the network part with a binary '1's and "hides" the client part with binary '0's.
The network mask is 'anded' to an IP address and results in the network address. In your example:
IP address (10010111011001010100000101000011) & mask (11111111111111110000000000000000)
is = 10010111011001010000000000000000, or 151.101.0.0
The network mask is usually only relevant locally. Consider a client with IP address 151.101.66.45 and network mask 255.255.255.0 that wants to view a page on your example IP.
The first decision the client needs to make is: can it connect to the address directly (i. e. is it in the same local network?) or does it need to send the request to the router (gateway). By "&"ing its own IP with its own newtwork mask (result = 151.101.66.0) and comparing it with the remote address & its own network mask (result = 151.101.65.0) it determines that both values are not equal, so the request goes to the router for further communication.
Related
I know that each IP class has a default network mask (class A: 255.0.0.0, class B: 255.255.0.0 and class C: 255.255.255.0).
I have been reading the subnetting.net tutorial and they use the default (classful) network mask for subnetting (Question Type 2 Written Example), but on the other hand I read all the time that IP classes are obsolete.
What is exactly a default network mask?
Is it needed for subnetting?
Am I confusing concepts? (I suspect I am)
Please help, this is burning my head.
The IP address can never become obsolete a similar anology can be your home address becoming obsolete. The fact that IPv4 addresses are drying up Because there are that many devices in the globe now which is greater than the number of ip's available. That's why we are moving to IPv6...
A subnet mask is a number that defines a range of IP addresses available within a network. A single subnet mask limits the number of valid IPs for a specific network. Multiple subnet masks can organize a single network into smaller networks (called subnetworks or subnets).
For exp a subnet mask of 255.255.255.0 allows for close to 256 unique hosts within the network (since not all 256 IP addresses can be used).see Why do we need subnet mask?
I am trying to learn how to calculate IP addresses from CIDR block.
For example, 10.88.135.144/28 or
10.88.135.10010000/28
From what I understand, that means first 28 bits are associated with network address while the rest 4 bits are host addresses. That would result in following IP range:
10.88.135.10010000 - 10.88.135.10011111
The first IP should be 10.88.135.144 and last IP address should be 10.88.135.159
But according to cidr.xyz. The first IP should be 10.88.135.145 and the last one should be 10.88.135.158.
I really can't figure out why. Can anyone explain the reason for me? Thanks!
Generally, the first IP is the network identifier and cannot be assigned to any device.This is used by router or switch on the network.
The last one is the broadcasting IP and cannot be assigned to any device as this IP is used by router or switch on the network to broadcast information.
https://www.quora.com/In-IP-addresses-what-is-meant-by-network-ID-and-host-ID
https://supportforums.cisco.com/t5/wan-routing-and-switching/what-is-broadcast-address/td-p/2494445#messageBodySimpleDisplay_1
Can someone explain exactly how CIDR blocks work and how it translates into 0.0.0.0/32 for example? Please use laymen’s terms or perhaps even an analogy to something not network related. Can’t seems to find an explanation that clicks with me. Thanks!!
Classless Inter-Domain Routing (CIDR) blocks are for specifying a range to IP addresses in format of IPv4 or IPv6. For the sake of simplicity I will explain rest of this in format of IPv4 however it is applicable to IPv6.
General format for CIDR Blocks: x.y.z.t/p
x, y, z and t are numbers from 0 to 255. Basically, each represents an 8 bit binary number. That's why it is range is up to 255. Combination of this numbers becomes an IPv4 IP address that must be unique to be able to identify a specific instance.
In case of AWS, p is a number from 16 to 28. It represents the number of bits that are inherited from given IP address. For example: 10.0.0.0/16 represents an IP address in following format: 10.0.x.y where x and y are any number from 0 to 255. So, actually it represents a range of IP addresses, starting from 10.0.0.0 to 10.0.255.255.
However for each CIDR block, AWS prohibits 5 possible IP addresses. Those are the first 4 available addresses and the last available address. In this case:
10.0.0.0: Network address
10.0.0.1: Reserved for VPC router
10.0.0.2: DNS server
10.0.0.3: Reserved for future use
10.0.255.255: Network broadcast
See here for official doc.
Actually this is one of the main reasons why AWS permits numeric value of p up to /28. Because for p=30, there will be 4 available values however AWS needs 5 IP address to use. In my opinion for p=29, they might found it inefficient to occupy 5 addresses to provide 3 possible IP address.
Number of possible IP addresses can be calculated by using this formula:
NumberOfPossibleIPs = 2^(32-p) - 5
Classless Inter-Domain Routing (CIDR) block basically is a method for allocating IP addresses and IP routing. When you create a network or route table, you need to specify what range are you working in. "0.0.0.0" means that it will match to any IP address. Some IP addresses are specific, like 10.0.0.0, which will match to any IP address beginning with 10. With any IP address range, you can be more specific by using a suffix(something like /32 from your example). These allow the notation to specify number of bits to be used from Prefix(actual IP-range like 10.0.0.0). It represents the bit length of the subnet mask, as indicated above. The subnet mask is like masking when painting. You place a mask over what you DO NOT want to paint on.
For example, 10.10.0.0/16 will have 256 * 256 IP address in its range.
NOTE: Some of the IP address in a range are reserved for various purposes. According to AWS VPC documentation, following are the reserved IP addresses.
10.0.0.0: Network address.
10.0.0.1: Reserved by AWS for the VPC router.
10.0.0.2: Reserved by AWS. The IP address of the DNS server is always the base of the VPC network range plus two; however, we also reserve the base of each subnet range plus two. For VPCs with multiple CIDR blocks, the IP address of the DNS server is located in the primary CIDR. For more information, see Amazon DNS Server.
10.0.0.3: Reserved by AWS for future use.
10.0.0.255: Network broadcast address. We do not support broadcast in a VPC, therefore we reserve this address.
Hope this helps!
All of the above answers are great, but are missing something pretty important for the people who don't understand addressing.
IP addresses are literally just a string of binary, broken up into 4 "octets". Each octet is a 2^8 block; 00000000. So to a machine, an IP address looks like this (with (.) added for human-ness):
00000000(.)00000000(.)00000000(.)00000000
When we're talking about the "mask" on the IP address, it means "the bits that don't change". The /8 or /255.0.0.0 on the end of the block signifies the number of bits that are not allowed to be used by this network.
So, lets say we have a CIDR block of 10.0.0.0/8 - this can also be written in the format 10.0.0.0/255.0.0.0, and you may in fact see this for of notation in older versions of linux. You will also note that 255 is the decimal representation of the binary string 11111111 - 8 binary "ones". So what the machine sees is the following:
Net: 00001010(.)00000000(.)00000000(.)00000000
Mask: 11111111(.)00000000(.)00000000(.)00000000
The part of the mask with 0's is usable address space within the network.
So the following example addresses are valid in this network, because on the 0 parts of the masked range are changing:
00001010(.)00000001(.)00110000(.)00111000
00001010(.)00110001(.)00110100(.)00111001
When we say "cidr block" we simply mean "the human-readable shorthand way of expressing binary strings understood by a machine". In the above example, the first octet can be expressed as 10, and the latter octets 0. And the Mask can be expressed as 255 and the latter octets of 0, or; because the mask is always a sequence of 1's, then a sequence of 0's, the length of the 1's, i.e. 8
And as such, we get a cidr of 10.0.0.0/255.0.0.0, or 10.0.0.0/8
A few more examples:
-- 172.1.1.0/24
net: 10101100.00000001.00000001.00000000
mask: 11111111.11111111.11111111.00000000
^ 24 bits for the mask ^ 8 bits of usable space
-- 10.10.10.8/29
net: 00001010.00001010.00001010.00001000
mask: 11111111.11111111.11111111.11111000
^ 29 bits for the mask. ^ 3 bits of usable space
Importantly though, this is only one aspect of networking. Usually a couple of these are reserved for things. See other answers for AWS specific things. In their examples, the "first 4" ip addresses reserved for AWS will be the first 4 usable addresses, which would be
...00 - Network address
...01 - Router
...10 - DNS
...11 - Futureproofing
i already have studied about the internet IP and all those stuff, but i'm still confused about how to identify network ID from an given IP address, for example, if i have given an IP address: 192.168.250.0/24, so what will be the network ID?
can you guys help me?? and explain the method?
Thank you in advance
You need to convert the IP address and mask to binary, then logically AND them, then convert back to decimal:
192.168.250.0 -----> 11000000.10101000.11111010.00000000
24 bit mask -------> 11111111.11111111.11111111.00000000
=================================== <--- Logical AND
Network address ---> 11000000.10101000.11111010.00000000 ---> 192.168.250.0
This answer on Network Engineering describes how to do all your IP operations.
It s simple, your IP address is 192.168.250.0/24 and you should know that IP address is in a fact 32 bits value of zeros and ones. So it s easy for human to say listen this first 24 bits are network ID (network part) and remaining 8 bits are host ID (host part), but machines need parameter that will use to determine what bits are in network and what bits are ih host part. That s why we have subnet mask, that map IP address in a way that binary ones "1" map bits that belongs to network part and binary zeros "0" map bits that belongs to host part.
So your IP address in binary form is
11000000.10101000.11111010.00000000 when we add subnet mask then you have
11111111.11111111.11111111.00000000 or 255.255.255.0 in decimal form
-------------------------------------
11000000.10101000.11111010. bits maped by binary ones (network part)
.00000000 bits maped by binary zeros (host part)
If you count number of ones in subnetmask you will see that there are 24 binary ones, and that s why we use other notations for presenting subnet mask, and that is by something we call network prefix or "/24".
When host want to send packets he first must determine network address, but how he do that? Every host have IP address and subnet mask let say
192.168.250.6 and subnetmask /24 == 255.255.255.0 or in binary
11000000.10101000.11111010.00000110
11111111.11111111.11111111.00000000
------------------------------------- network hosts use logical AND operation
11000000.10101000.11111010.00000000
(notice that network address is address that have binary zeros in host part of IP address. Logical AND use two values (0 or 1), results of this logical operation is "1" only when both values are "1" (or you can easily rememmber it has to be "1" AND "1" to get "1" as result :) ).
After this host examine destination IP let s say 192.168.10.6, and host use again same operation and if result show that network part is identical with his IP than thay communicate directly or if they have different networkID hosts use gateway since destination is at another network.
Currenly I have a c function that takes a ip address and subnetmask and checks if given ipv4 is private/public.
It does by following logic to matchsubnet:
(local ipv4 address && local subnetmask) == (given ipv4 && given subnetmask)
What logic can be written for ipv6? I can write a function to receive an ip and subnet prefix. Can i get local subnet prefix?
I order to determine if two hosts are on the same subnet take both their addresses and prefix lengths (subnet masks).
If the prefix lengths are different then they are not on the same network.
If the prefix lengths are the same then take the length ( very probably 64, so let's assume that) and compare the first 64 bits of both addresses with each other. If they are the same then they are both on the same network.
It is basically the same as you do for IPv4 with making the bits that don't being to the prefix. With 128 addresses it might be easier though to implement it as a loop comparing 4 bits at a time (comparing the hexadecimal notation) or 8 bits at a time (comparing the parsed bytes).