I have VM in GCE located in europe-west1-b
but when I traceroute VM's IP, it shows US:
..any ideas why?
Exactly which command did you use?
Trace Route command traces a route to a given IP address and your VM's external IP Address will be visible on your VM Instance homepage.
Related
I am running Devstack on my machine and i would like to know if it is possible to ping an instance from Host. The default external network of Devstack is 172.24.4.0/24 and br-ex on Host has the IP 172.24.4.1. I launch an instance using the internal network of Devstack (192.168.233.0/24) and the instance gets the IP 192.168.233.100. My Host's IP is 192.168.1.10. Is there a way to ping 192.168.233.100 from my Host? Another thing i thought is to boot up a VM directly to the external network (172.24.4.0/24) but the VM does not boot up correctly. I can only use that network for associating floating IP's.
I have edited the security group and i have allowed ICMP and SSH, so this is not a problem.
Hello Everyone!
I want to know that is there any way to access a photocopier machine which is connected to a computer through Ethernet wire and that computer is connected to my WiFi network?
P.S: What if I don't know the IP assigned to that Photocopier machine?
If the wireless network is part of the wired network you should have any problem reaching the photocopier.
If you don't know the IP address, you can reach it by host name if the DHCP and DNS are working properly. If you are on an Active Directory infrastructure and DHCP and DNS are integrated it should be transparent.
If you are on your home with a "home" router they usually do the hostname to IP resolve (DNS).
You can nslookup hostname in your machine to see if your dns is resolving the ip address. you can also ping hostname or ping ip address to test that you can reach the desired host. Some hosts block ping (ICMP) requests, please note that ping is ping does not respond is not a definitive solution.
Please note that in your home router you should use your router or default gateway to be the DNS also, and then add the google public DNS or your ISP.
Also when connecting the access point to an existing network you may have 2 DHCP servers providing IP addresses to hosts, you should disable DHCP on the Access Point and connect the AP to the network using the switch port and not the WAN port (the WAN port will try to do NAT and assign a different set of IP addresses).
I am facing a strange issue these days. I have a list of IP addresses which I want to connect to during the deployment using Jenkins. Now what is happening is, if I am deploying at one IP address (remote machine but in same location) in my local location server, I can successfully do that. But If I am trying to deploy to an IP address (remote machine in other country/region) It is throwing the error, saying
Error : Ip address XYZ is not reachable or is invalid.
Please be notified that I am able to get the response from the machine when I ping it using:
ping XYZ
But while trying to deploy on it using Jenkins, I am not.
Please let me know if there's any solution for this problem.
There isn't enough data points but you can look for these things
1. IP address, Check if all three machines are in same n/w (Jenkins Server, target and your machine)
You can check it with IP address of each machine
2. check Gateway set for Jenkins server
3. Best way if feasible is to ssh / rdp to your Jenkins server and try running your command manually that will give you
Local machine get loopback address(127.0.0.1), so it will be reachable or any local machine having IP address with same subnet mask thats called LAN.
When you are reaching out to remote machine, either it should be public IP address(visible to everyone in the world) or you must have connect to that Area-Network via VPN, this is called tunnelling to remote over the WAN (wide area network). Their(remote location) again, you will notice that all the IP address have same subnet mask as you have on the local machine.
So their could be be IP address duplication case in VPN scenario, where you are bale to ping but not able to reach. This is because, IP address is assigned to other machine but not you yours and ping responses are coming from that other machine. That means your machine is in failed to resolve ARP and in dormant state.
I have installed Xen4Centos on Centos7, having single NIC with bridge network and have two VMs on that.
In one VM, I want to add two static IP one for webserver and one for mail server.
So I have created IP alias in guest VM, it was created but it was not pinging from outside public network or from the host.
So if you have any idea how to add second IP in the guest VM then please let me know.
I have searched on Google but most of the tutorials had given example for one IP only.
I have figure out the way to listen the second IP from public network.
I have added second interface in the VM configuration file with MAC address, so inside VM it looks like eth0 and eth1.
Then I have created a routing table for eth1 and added default gateway to eth1. [ ip route add default via XXX.XX.XXX.112 dev eth1 table eth1].
So doing this way second IP in VM was reachable from public network.
I have a machine in my private network with IP 192.168.1.10
I have a DNS name, "toto.mydns.com", a DNS client is running on the machine.
I configured the router for Port forwarding.
I can access the machine when i am outside my home, when using a pulic IP address it works but when i am at home and i get a dynamic IP address trough DHCP from my router, i cannot use toto.mydns.com anymore, i must use 192.168.1.10 to access.
I would like to know if i need to configure something on the router for that ?
Thank you !
toto.mydns.com will resolve to your external public IP
There will almost certainly be nothing routing that IP through to your router, and thus through NAT to your internal address.
The easiest way to resolve this (Pun very much intended) is to have a hosts file entry on your computers running inside your network so that they resolve the same DNS address to the internal address.
A much harder, but more fun, way would be to set up your own DNS server inside your network, have the DHCP dish it out as the primary DNS server for your network and put in an entry for your internal address :D
Have fun...
Toto.mydns.com is accessible from outside,this DNS is assigned on a machine with a static IP address(sorry not dynamic),so the IP of this machine is 192.168.1.10.
Whrn i am at home in my private network i need to enter 192.168.1.10 and toto.mydns.com does not work.Any help???