Related
Someone told me that he has seen software systems that:
retrieve MD5 encrypted passwords from other systems;
decrypt the encrypted passwords and
store the passwords in the database of the system using the systems own algorithm.
Is that possible? I thought that it wasn't possible / feasible to decrypt MD5 hashes.
I know there are MD5 dictionaries, but is there an actual decryption algorithm?
No. MD5 is not encryption (though it may be used as part of some encryption algorithms), it is a one way hash function. Much of the original data is actually "lost" as part of the transformation.
Think about this: An MD5 is always 128 bits long. That means that there are 2128 possible MD5 hashes. That is a reasonably large number, and yet it is most definitely finite. And yet, there are an infinite number of possible inputs to a given hash function (and most of them contain more than 128 bits, or a measly 16 bytes). So there are actually an infinite number of possibilities for data that would hash to the same value. The thing that makes hashes interesting is that it is incredibly difficult to find two pieces of data that hash to the same value, and the chances of it happening by accident are almost 0.
A simple example for a (very insecure) hash function (and this illustrates the general idea of it being one-way) would be to take all of the bits of a piece of data, and treat it as a large number. Next, perform integer division using some large (probably prime) number n and take the remainder (see: Modulus). You will be left with some number between 0 and n. If you were to perform the same calculation again (any time, on any computer, anywhere), using the exact same string, it will come up with the same value. And yet, there is no way to find out what the original value was, since there are an infinite number of numbers that have that exact remainder, when divided by n.
That said, MD5 has been found to have some weaknesses, such that with some complex mathematics, it may be possible to find a collision without trying out 2128 possible input strings. And the fact that most passwords are short, and people often use common values (like "password" or "secret") means that in some cases, you can make a reasonably good guess at someone's password by Googling for the hash or using a Rainbow table. That is one reason why you should always "salt" hashed passwords, so that two identical values, when hashed, will not hash to the same value.
Once a piece of data has been run through a hash function, there is no going back.
You can't - in theory. The whole point of a hash is that it's one way only. This means that if someone manages to get the list of hashes, they still can't get your password. Additionally it means that even if someone uses the same password on multiple sites (yes, we all know we shouldn't, but...) anyone with access to the database of site A won't be able to use the user's password on site B.
The fact that MD5 is a hash also means it loses information. For any given MD5 hash, if you allow passwords of arbitrary length there could be multiple passwords which produce the same hash. For a good hash it would be computationally infeasible to find them beyond a pretty trivial maximum length, but it means there's no guarantee that if you find a password which has the target hash, it's definitely the original password. It's astronomically unlikely that you'd see two ASCII-only, reasonable-length passwords that have the same MD5 hash, but it's not impossible.
MD5 is a bad hash to use for passwords:
It's fast, which means if you have a "target" hash, it's cheap to try lots of passwords and see whether you can find one which hashes to that target. Salting doesn't help with that scenario, but it helps to make it more expensive to try to find a password matching any one of multiple hashes using different salts.
I believe it has known flaws which make it easier to find collisions, although finding collisions within printable text (rather than arbitrary binary data) would at least be harder.
I'm not a security expert, so won't make a concrete recommendation beyond "Don't roll your own authentication system." Find one from a reputable supplier, and use that. Both the design and implementation of security systems is a tricky business.
Technically, it's 'possible', but under very strict conditions (rainbow tables, brute forcing based on the very small possibility that a user's password is in that hash database).
But that doesn't mean it's
Viable
or
Secure
You don't want to 'reverse' an MD5 hash. Using the methods outlined below, you'll never need to. 'Reversing' MD5 is actually considered malicious - a few websites offer the ability to 'crack' and bruteforce MD5 hashes - but all they are are massive databases containing dictionary words, previously submitted passwords and other words. There is a very small chance that it will have the MD5 hash you need reversed. And if you've salted the MD5 hash - this won't work either! :)
The way logins with MD5 hashing should work is:
During Registration:
User creates password -> Password is hashed using MD5 -> Hash stored in database
During Login:
User enters username and password -> (Username checked) Password is hashed using MD5 -> Hash is compared with stored hash in database
When 'Lost Password' is needed:
2 options:
User sent a random password to log in, then is bugged to change it on first login.
or
User is sent a link to change their password (with extra checking if you have a security question/etc) and then the new password is hashed and replaced with old password in database
Not directly. Because of the pigeonhole principle, there is (likely) more than one value that hashes to any given MD5 output. As such, you can't reverse it with certainty. Moreover, MD5 is made to make it difficult to find any such reversed hash (however there have been attacks that produce collisions - that is, produce two values that hash to the same result, but you can't control what the resulting MD5 value will be).
However, if you restrict the search space to, for example, common passwords with length under N, you might no longer have the irreversibility property (because the number of MD5 outputs is much greater than the number of strings in the domain of interest). Then you can use a rainbow table or similar to reverse hashes.
Not possible, at least not in a reasonable amount of time.
The way this is often handled is a password "reset". That is, you give them a new (random) password and send them that in an email.
You can't revert a md5 password.(in any language)
But you can:
give to the user a new one.
check in some rainbow table to maybe retrieve the old one.
No, he must have been confused about the MD5 dictionaries.
Cryptographic hashes (MD5, etc...) are one way and you can't get back to the original message with only the digest unless you have some other information about the original message, etc. that you shouldn't.
Decryption (directly getting the the plain text from the hashed value, in an algorithmic way), no.
There are, however, methods that use what is known as a rainbow table. It is pretty feasible if your passwords are hashed without a salt.
MD5 is a hashing algorithm, you can not revert the hash value.
You should add "change password feature", where the user gives another password, calculates the hash and store it as a new password.
There's no easy way to do it. This is kind of the point of hashing the password in the first place. :)
One thing you should be able to do is set a temporary password for them manually and send them that.
I hesitate to mention this because it's a bad idea (and it's not guaranteed to work anyway), but you could try looking up the hash in a rainbow table like milw0rm to see if you can recover the old password that way.
See all other answers here about how and why it's not reversible and why you wouldn't want to anyway.
For completeness though, there are rainbow tables which you can look up possible matches on. There is no guarantee that the answer in the rainbow table will be the original password chosen by your user so that would confuse them greatly.
Also, this will not work for salted hashes. Salting is recommended by many security experts.
No, it is not possible to reverse a hash function such as MD5: given the output hash value it is impossible to find the input message unless enough information about the input message is known.
Decryption is not a function that is defined for a hash function; encryption and decryption are functions of a cipher such as AES in CBC mode; hash functions do not encrypt nor decrypt. Hash functions are used to digest an input message. As the name implies there is no reverse algorithm possible by design.
MD5 has been designed as a cryptographically secure, one-way hash function. It is now easy to generate collisions for MD5 - even if a large part of the input message is pre-determined. So MD5 is officially broken and MD5 should not be considered a cryptographically secure hash anymore. It is however still impossible to find an input message that leads to a hash value: find X when only H(X) is known (and X doesn't have a pre-computed structure with at least one 128 byte block of precomputed data). There are no known pre-image attacks against MD5.
It is generally also possible to guess passwords using brute force or (augmented) dictionary attacks, to compare databases or to try and find password hashes in so called rainbow tables. If a match is found then it is computationally certain that the input has been found. Hash functions are also secure against collision attacks: finding X' so that H(X') = H(X) given H(X). So if an X is found it is computationally certain that it was indeed the input message. Otherwise you would have performed a collision attack after all. Rainbow tables can be used to speed up the attacks and there are specialized internet resources out there that will help you find a password given a specific hash.
It is of course possible to re-use the hash value H(X) to verify passwords that were generated on other systems. The only thing that the receiving system has to do is to store the result of a deterministic function F that takes H(X) as input. When X is given to the system then H(X) and therefore F can be recalculated and the results can be compared. In other words, it is not required to decrypt the hash value to just verify that a password is correct, and you can still store the hash as a different value.
Instead of MD5 it is important to use a password hash or PBKDF (password based key derivation function) instead. Such a function specifies how to use a salt together with a hash. That way identical hashes won't be generated for identical passwords (from other users or within other databases). Password hashes for that reason also do not allow rainbow tables to be used as long as the salt is large enough and properly randomized.
Password hashes also contain a work factor (sometimes configured using an iteration count) that can significantly slow down attacks that try to find the password given the salt and hash value. This is important as the database with salts and hash values could be stolen. Finally, the password hash may also be memory-hard so that a significant amount of memory is required to calculate the hash. This makes it impossible to use special hardware (GPU's, ASIC's, FPGA's etc.) to allow an attacker to speed up the search. Other inputs or configuration options such as a pepper or the amount of parallelization may also be available to a password hash.
It will however still allow anybody to verify a password given H(X) even if H(X) is a password hash. Password hashes are still deterministic, so if anybody has knows all the input and the hash algorithm itself then X can be used to calculate H(X) and - again - the results can be compared.
Commonly used password hashes are bcrypt, scrypt and PBKDF2. There is also Argon2 in various forms which is the winner of the reasonably recent password hashing competition. Here on CrackStation is a good blog post on doing password security right.
It is possible to make it impossible for adversaries to perform the hash calculation verify that a password is correct. For this a pepper can be used as input to the password hash. Alternatively, the hash value can of course be encrypted using a cipher such as AES and a mode of operation such as CBC or GCM. This however requires the storage of a secret / key independently and with higher access requirements than the password hash.
MD5 is considered broken, not because you can get back the original content from the hash, but because with work, you can craft two messages that hash to the same hash.
You cannot un-hash an MD5 hash.
There is no way of "reverting" a hash function in terms of finding the inverse function for it. As mentioned before, this is the whole point of having a hash function. It should not be reversible and it should allow for fast hash value calculation. So the only way to find an input string which yields a given hash value is to try out all possible combinations. This is called brute force attack for that reason.
Trying all possible combinations takes a lot of time and this is also the reason why hash values are used to store passwords in a relatively safe way. If an attacker is able to access your database with all the user passwords inside, you loose in any case. If you have hash values and (idealistically speaking) strong passwords, it will be a lot harder to get the passwords out of the hash values for the attacker.
Storing the hash values is also no performance problem because computing the hash value is relatively fast. So what most systems do is computing the hash value of the password the user keyed in (which is fast) and then compare it to the stored hash value in their user database.
You can find online tools that use a dictionary to retrieve the original message.
In some cases, the dictionary method might just be useless:
if the message is hashed using a SALT message
if the message is hash more than once
For example, here is one MD5 decrypter online tool.
The only thing that can be work is (if we mention that the passwords are just hashed, without adding any kind of salt to prevent the replay attacks, if it is so you must know the salt)by the way, get an dictionary attack tool, the files of many words, numbers etc. then create two rows, one row is word,number (in dictionary) the other one is hash of the word, and compare the hashes if matches you get it...
that's the only way, without going into cryptanalysis.
The MD5 Hash algorithm is not reversible, so MD5 decode in not possible, but some website have bulk set of password match, so you can try online for decode MD5 hash.
Try online :
MD5 Decrypt
md5online
md5decrypter
Yes, exactly what you're asking for is possible.
It is not possible to 'decrypt' an MD5 password without help, but it is possible to re-encrypt an MD5 password into another algorithm, just not all in one go.
What you do is arrange for your users to be able to logon to your new system using the old MD5 password. At the point that they login they have given your login program an unhashed version of the password that you prove matches the MD5 hash that you have. You can then convert this unhashed password to your new hashing algorithm.
Obviously, this is an extended process because you have to wait for your users to tell you what the passwords are, but it does work.
(NB: seven years later, oh well hopefully someone will find it useful)
No, it cannot be done. Either you can use a dictionary, or you can try hashing different values until you get the hash that you are seeking. But it cannot be "decrypted".
MD5 has its weaknesses (see Wikipedia), so there are some projects, which try to precompute Hashes. Wikipedia does also hint at some of these projects. One I know of (and respect) is ophrack. You can not tell the user their own password, but you might be able to tell them a password that works. But i think: Just mail thrm a new password in case they forgot.
In theory it is not possible to decrypt a hash value but you have some dirty techniques for getting the original plain text back.
Bruteforcing: All computer security algorithm suffer bruteforcing. Based on this idea today's GPU employ the idea of parallel programming using which it can get back the plain text by massively bruteforcing it using any graphics processor. This tool hashcat does this job. Last time I checked the cuda version of it, I was able to bruteforce a 7 letter long character within six minutes.
Internet search: Just copy and paste the hash on Google and see If you can find the corresponding plaintext there. This is not a solution when you are pentesting something but it is definitely worth a try. Some websites maintain the hash for almost all the words in the dictionary.
MD5 is a cryptographic (one-way) hash function, so there is no direct way to decode it. The entire purpose of a cryptographic hash function is that you can't undo it.
One thing you can do is a brute-force strategy, where you guess what was hashed, then hash it with the same function and see if it matches. Unless the hashed data is very easy to guess, it could take a long time though.
It is not yet possible to put in a hash of a password into an algorithm and get the password back in plain text because hashing is a one way thing. But what people have done is to generate hashes and store it in a big table so that when you enter a particular hash, it checks the table for the password that matches the hash and returns that password to you. An example of a site that does that is http://www.md5online.org/ . Modern password storage system counters this by using a salting algorithm such that when you enter the same password into a password box during registration different hashes are generated.
No, you can not decrypt/reverse the md5 as it is a one-way hash function till you can not found a extensive vulnerabilities in the MD5.
Another way is there are some website has a large amount of set of password database, so you can try online to decode your MD5 or SHA1 hash string.
I tried a website like http://www.mycodemyway.com/encrypt-and-decrypt/md5 and its working fine for me but this totally depends on your hash if that hash is stored in that database then you can get the actual string.
Someone told me that he has seen software systems that:
retrieve MD5 encrypted passwords from other systems;
decrypt the encrypted passwords and
store the passwords in the database of the system using the systems own algorithm.
Is that possible? I thought that it wasn't possible / feasible to decrypt MD5 hashes.
I know there are MD5 dictionaries, but is there an actual decryption algorithm?
No. MD5 is not encryption (though it may be used as part of some encryption algorithms), it is a one way hash function. Much of the original data is actually "lost" as part of the transformation.
Think about this: An MD5 is always 128 bits long. That means that there are 2128 possible MD5 hashes. That is a reasonably large number, and yet it is most definitely finite. And yet, there are an infinite number of possible inputs to a given hash function (and most of them contain more than 128 bits, or a measly 16 bytes). So there are actually an infinite number of possibilities for data that would hash to the same value. The thing that makes hashes interesting is that it is incredibly difficult to find two pieces of data that hash to the same value, and the chances of it happening by accident are almost 0.
A simple example for a (very insecure) hash function (and this illustrates the general idea of it being one-way) would be to take all of the bits of a piece of data, and treat it as a large number. Next, perform integer division using some large (probably prime) number n and take the remainder (see: Modulus). You will be left with some number between 0 and n. If you were to perform the same calculation again (any time, on any computer, anywhere), using the exact same string, it will come up with the same value. And yet, there is no way to find out what the original value was, since there are an infinite number of numbers that have that exact remainder, when divided by n.
That said, MD5 has been found to have some weaknesses, such that with some complex mathematics, it may be possible to find a collision without trying out 2128 possible input strings. And the fact that most passwords are short, and people often use common values (like "password" or "secret") means that in some cases, you can make a reasonably good guess at someone's password by Googling for the hash or using a Rainbow table. That is one reason why you should always "salt" hashed passwords, so that two identical values, when hashed, will not hash to the same value.
Once a piece of data has been run through a hash function, there is no going back.
You can't - in theory. The whole point of a hash is that it's one way only. This means that if someone manages to get the list of hashes, they still can't get your password. Additionally it means that even if someone uses the same password on multiple sites (yes, we all know we shouldn't, but...) anyone with access to the database of site A won't be able to use the user's password on site B.
The fact that MD5 is a hash also means it loses information. For any given MD5 hash, if you allow passwords of arbitrary length there could be multiple passwords which produce the same hash. For a good hash it would be computationally infeasible to find them beyond a pretty trivial maximum length, but it means there's no guarantee that if you find a password which has the target hash, it's definitely the original password. It's astronomically unlikely that you'd see two ASCII-only, reasonable-length passwords that have the same MD5 hash, but it's not impossible.
MD5 is a bad hash to use for passwords:
It's fast, which means if you have a "target" hash, it's cheap to try lots of passwords and see whether you can find one which hashes to that target. Salting doesn't help with that scenario, but it helps to make it more expensive to try to find a password matching any one of multiple hashes using different salts.
I believe it has known flaws which make it easier to find collisions, although finding collisions within printable text (rather than arbitrary binary data) would at least be harder.
I'm not a security expert, so won't make a concrete recommendation beyond "Don't roll your own authentication system." Find one from a reputable supplier, and use that. Both the design and implementation of security systems is a tricky business.
Technically, it's 'possible', but under very strict conditions (rainbow tables, brute forcing based on the very small possibility that a user's password is in that hash database).
But that doesn't mean it's
Viable
or
Secure
You don't want to 'reverse' an MD5 hash. Using the methods outlined below, you'll never need to. 'Reversing' MD5 is actually considered malicious - a few websites offer the ability to 'crack' and bruteforce MD5 hashes - but all they are are massive databases containing dictionary words, previously submitted passwords and other words. There is a very small chance that it will have the MD5 hash you need reversed. And if you've salted the MD5 hash - this won't work either! :)
The way logins with MD5 hashing should work is:
During Registration:
User creates password -> Password is hashed using MD5 -> Hash stored in database
During Login:
User enters username and password -> (Username checked) Password is hashed using MD5 -> Hash is compared with stored hash in database
When 'Lost Password' is needed:
2 options:
User sent a random password to log in, then is bugged to change it on first login.
or
User is sent a link to change their password (with extra checking if you have a security question/etc) and then the new password is hashed and replaced with old password in database
Not directly. Because of the pigeonhole principle, there is (likely) more than one value that hashes to any given MD5 output. As such, you can't reverse it with certainty. Moreover, MD5 is made to make it difficult to find any such reversed hash (however there have been attacks that produce collisions - that is, produce two values that hash to the same result, but you can't control what the resulting MD5 value will be).
However, if you restrict the search space to, for example, common passwords with length under N, you might no longer have the irreversibility property (because the number of MD5 outputs is much greater than the number of strings in the domain of interest). Then you can use a rainbow table or similar to reverse hashes.
Not possible, at least not in a reasonable amount of time.
The way this is often handled is a password "reset". That is, you give them a new (random) password and send them that in an email.
You can't revert a md5 password.(in any language)
But you can:
give to the user a new one.
check in some rainbow table to maybe retrieve the old one.
No, he must have been confused about the MD5 dictionaries.
Cryptographic hashes (MD5, etc...) are one way and you can't get back to the original message with only the digest unless you have some other information about the original message, etc. that you shouldn't.
Decryption (directly getting the the plain text from the hashed value, in an algorithmic way), no.
There are, however, methods that use what is known as a rainbow table. It is pretty feasible if your passwords are hashed without a salt.
MD5 is a hashing algorithm, you can not revert the hash value.
You should add "change password feature", where the user gives another password, calculates the hash and store it as a new password.
There's no easy way to do it. This is kind of the point of hashing the password in the first place. :)
One thing you should be able to do is set a temporary password for them manually and send them that.
I hesitate to mention this because it's a bad idea (and it's not guaranteed to work anyway), but you could try looking up the hash in a rainbow table like milw0rm to see if you can recover the old password that way.
See all other answers here about how and why it's not reversible and why you wouldn't want to anyway.
For completeness though, there are rainbow tables which you can look up possible matches on. There is no guarantee that the answer in the rainbow table will be the original password chosen by your user so that would confuse them greatly.
Also, this will not work for salted hashes. Salting is recommended by many security experts.
No, it is not possible to reverse a hash function such as MD5: given the output hash value it is impossible to find the input message unless enough information about the input message is known.
Decryption is not a function that is defined for a hash function; encryption and decryption are functions of a cipher such as AES in CBC mode; hash functions do not encrypt nor decrypt. Hash functions are used to digest an input message. As the name implies there is no reverse algorithm possible by design.
MD5 has been designed as a cryptographically secure, one-way hash function. It is now easy to generate collisions for MD5 - even if a large part of the input message is pre-determined. So MD5 is officially broken and MD5 should not be considered a cryptographically secure hash anymore. It is however still impossible to find an input message that leads to a hash value: find X when only H(X) is known (and X doesn't have a pre-computed structure with at least one 128 byte block of precomputed data). There are no known pre-image attacks against MD5.
It is generally also possible to guess passwords using brute force or (augmented) dictionary attacks, to compare databases or to try and find password hashes in so called rainbow tables. If a match is found then it is computationally certain that the input has been found. Hash functions are also secure against collision attacks: finding X' so that H(X') = H(X) given H(X). So if an X is found it is computationally certain that it was indeed the input message. Otherwise you would have performed a collision attack after all. Rainbow tables can be used to speed up the attacks and there are specialized internet resources out there that will help you find a password given a specific hash.
It is of course possible to re-use the hash value H(X) to verify passwords that were generated on other systems. The only thing that the receiving system has to do is to store the result of a deterministic function F that takes H(X) as input. When X is given to the system then H(X) and therefore F can be recalculated and the results can be compared. In other words, it is not required to decrypt the hash value to just verify that a password is correct, and you can still store the hash as a different value.
Instead of MD5 it is important to use a password hash or PBKDF (password based key derivation function) instead. Such a function specifies how to use a salt together with a hash. That way identical hashes won't be generated for identical passwords (from other users or within other databases). Password hashes for that reason also do not allow rainbow tables to be used as long as the salt is large enough and properly randomized.
Password hashes also contain a work factor (sometimes configured using an iteration count) that can significantly slow down attacks that try to find the password given the salt and hash value. This is important as the database with salts and hash values could be stolen. Finally, the password hash may also be memory-hard so that a significant amount of memory is required to calculate the hash. This makes it impossible to use special hardware (GPU's, ASIC's, FPGA's etc.) to allow an attacker to speed up the search. Other inputs or configuration options such as a pepper or the amount of parallelization may also be available to a password hash.
It will however still allow anybody to verify a password given H(X) even if H(X) is a password hash. Password hashes are still deterministic, so if anybody has knows all the input and the hash algorithm itself then X can be used to calculate H(X) and - again - the results can be compared.
Commonly used password hashes are bcrypt, scrypt and PBKDF2. There is also Argon2 in various forms which is the winner of the reasonably recent password hashing competition. Here on CrackStation is a good blog post on doing password security right.
It is possible to make it impossible for adversaries to perform the hash calculation verify that a password is correct. For this a pepper can be used as input to the password hash. Alternatively, the hash value can of course be encrypted using a cipher such as AES and a mode of operation such as CBC or GCM. This however requires the storage of a secret / key independently and with higher access requirements than the password hash.
MD5 is considered broken, not because you can get back the original content from the hash, but because with work, you can craft two messages that hash to the same hash.
You cannot un-hash an MD5 hash.
There is no way of "reverting" a hash function in terms of finding the inverse function for it. As mentioned before, this is the whole point of having a hash function. It should not be reversible and it should allow for fast hash value calculation. So the only way to find an input string which yields a given hash value is to try out all possible combinations. This is called brute force attack for that reason.
Trying all possible combinations takes a lot of time and this is also the reason why hash values are used to store passwords in a relatively safe way. If an attacker is able to access your database with all the user passwords inside, you loose in any case. If you have hash values and (idealistically speaking) strong passwords, it will be a lot harder to get the passwords out of the hash values for the attacker.
Storing the hash values is also no performance problem because computing the hash value is relatively fast. So what most systems do is computing the hash value of the password the user keyed in (which is fast) and then compare it to the stored hash value in their user database.
You can find online tools that use a dictionary to retrieve the original message.
In some cases, the dictionary method might just be useless:
if the message is hashed using a SALT message
if the message is hash more than once
For example, here is one MD5 decrypter online tool.
The only thing that can be work is (if we mention that the passwords are just hashed, without adding any kind of salt to prevent the replay attacks, if it is so you must know the salt)by the way, get an dictionary attack tool, the files of many words, numbers etc. then create two rows, one row is word,number (in dictionary) the other one is hash of the word, and compare the hashes if matches you get it...
that's the only way, without going into cryptanalysis.
The MD5 Hash algorithm is not reversible, so MD5 decode in not possible, but some website have bulk set of password match, so you can try online for decode MD5 hash.
Try online :
MD5 Decrypt
md5online
md5decrypter
Yes, exactly what you're asking for is possible.
It is not possible to 'decrypt' an MD5 password without help, but it is possible to re-encrypt an MD5 password into another algorithm, just not all in one go.
What you do is arrange for your users to be able to logon to your new system using the old MD5 password. At the point that they login they have given your login program an unhashed version of the password that you prove matches the MD5 hash that you have. You can then convert this unhashed password to your new hashing algorithm.
Obviously, this is an extended process because you have to wait for your users to tell you what the passwords are, but it does work.
(NB: seven years later, oh well hopefully someone will find it useful)
No, it cannot be done. Either you can use a dictionary, or you can try hashing different values until you get the hash that you are seeking. But it cannot be "decrypted".
MD5 has its weaknesses (see Wikipedia), so there are some projects, which try to precompute Hashes. Wikipedia does also hint at some of these projects. One I know of (and respect) is ophrack. You can not tell the user their own password, but you might be able to tell them a password that works. But i think: Just mail thrm a new password in case they forgot.
In theory it is not possible to decrypt a hash value but you have some dirty techniques for getting the original plain text back.
Bruteforcing: All computer security algorithm suffer bruteforcing. Based on this idea today's GPU employ the idea of parallel programming using which it can get back the plain text by massively bruteforcing it using any graphics processor. This tool hashcat does this job. Last time I checked the cuda version of it, I was able to bruteforce a 7 letter long character within six minutes.
Internet search: Just copy and paste the hash on Google and see If you can find the corresponding plaintext there. This is not a solution when you are pentesting something but it is definitely worth a try. Some websites maintain the hash for almost all the words in the dictionary.
MD5 is a cryptographic (one-way) hash function, so there is no direct way to decode it. The entire purpose of a cryptographic hash function is that you can't undo it.
One thing you can do is a brute-force strategy, where you guess what was hashed, then hash it with the same function and see if it matches. Unless the hashed data is very easy to guess, it could take a long time though.
It is not yet possible to put in a hash of a password into an algorithm and get the password back in plain text because hashing is a one way thing. But what people have done is to generate hashes and store it in a big table so that when you enter a particular hash, it checks the table for the password that matches the hash and returns that password to you. An example of a site that does that is http://www.md5online.org/ . Modern password storage system counters this by using a salting algorithm such that when you enter the same password into a password box during registration different hashes are generated.
No, you can not decrypt/reverse the md5 as it is a one-way hash function till you can not found a extensive vulnerabilities in the MD5.
Another way is there are some website has a large amount of set of password database, so you can try online to decode your MD5 or SHA1 hash string.
I tried a website like http://www.mycodemyway.com/encrypt-and-decrypt/md5 and its working fine for me but this totally depends on your hash if that hash is stored in that database then you can get the actual string.
I heard that after encrypting something using the MD5 algorithm, it is not possible to decrypt the data. But for any encryption, there should be a way to decrypt the data, right? Otherwise, what is the need of the words Encryption and Decryption?
Am I wrong?
Basically, MD5 is not an encryption method.
It's a Hash function, where you will lose the data due to the data processing under the function. So you wont get the old data back. So the whole point of a hash is that it's one way only. MD5 is http://en.wikipedia.org/wiki/Cryptographic_hash_function">cryptographic hash function so the following things are applicable.
Some people save the user passwords using the MD5 Hash. So, even their webservers won't be knowing what exactly is your password. They only have a token for the password. Thats why in many of the websites when you request a forgot-password request, they asks you to change the password by providing a unique link instead of retrieving your old password. (Basically, they don't have your password in human readable format)
So another doubt that you could have is what if someone knows your hashed password token? The answer is simple, still you are safe, because the login authentication check converts the user input to a hash function and then checks with the DB. In this case, a new Hash value will be obtained for your hashed value.
Here is some good reading:
https://en.wikipedia.org/wiki/MD5
Long speech short:
MD5 basically map any string of any size to a 64bit hexadecimal number.
A lot of information is lost in the process and there is no way to make this information pop back.
MD5 is a hash function.
A hash function is any function that can be used to map digital data of arbitrary size to digital data of fixed size, with slight differences in input data producing very big differences in output data (source: wikipedia).
This way, the original data is not preserved. So why would you use a Hash function? It is useful for comparing arbitrary size datasets: since hashes can be short and have a fixed size, once computed any comparison is very cheap and predictable - O(1) - no matter how large the original data.
MD5 is also a cryptographic hash function. A cryptographic hash function allows one to easily verify that some input data matches a stored hash value, but makes it hard to reconstruct the data from the hash alone.
So the whole point of MD5 is that given a hash, getting back the original data should be as hard as possible.
Basically what the title says. If I have a password, of say "APPLEPIE" is it safe to use "APPLEPIE" as the key when I RC4 it? Is it possible to break the RC4 encryption when you know the Key and Plaintext or are short and the same?
This should be handled with a key generation algorithm like PBKDF2, which will allow you to securely generate a hash from your password in a way that is appropriate for password verification (which is what I assume you're doing).
While it is possible to generate a system by which RC4 would be safe this way (by converting the password into an RC4 key using a good KDF (such as PBKDF2), and then generating a random nonce), this is a lot of overhead to no purpose. You'll wind up with a much longer final cipher text for the same level of security, and it'll take you longer to generate it. In the end, you'll have just created an extremely complicated secure hash function (whose first step is "do the only thing you needed to do anyway). And you'll probably have made a mistake along the way, making the system insecure. RC4 can be tricky to do correctly and has known related-key attacks; hence the break of WEP.
If we can't decode the MD5 hash string, then what is the purpose of MD5 where can we use MD5.
To store data save in a database for example.
If you save your password using md5 and you compare it with the password you enter in a form and hash it, it is still the same password but you can't see it in clear text in the database.
For example:
password = 123
md5(123) === "202cb962ac59075b964b07152d234b70"
if you try to log in and you enter 123 as your password, the md5 of it will still be the same and you can compare those. But if your database is hacked the hacker cannot read the password in clear text, only the hashed value
An decryptable file has the property that its always at least as big as the original file, a hash is much, much smaller.
This allows us the create a hash from a file that can prove the integrity of the file, without storing it.
There are many reasons not to store the file in encrypted or plain text:
As soon as an encrypted file falls in the wrong hands, they could try to decrypt it. There's no chance that's going to happen with a hash.
You simply don't need the file yourself, but maybe you're sending it to someone, and that person can proof it's integrity using the hash.
It allows you to determine whether the data you have (e.g., an entered password) is the same as some other data which is secret (e.g., the correct password) without requiring access to the secret data. In other words, it can be used to determine "is this user-entered password correct?" while also keeping the correct password secret. (Note that there are stronger hashing methods out there which should be used instead of md5 for this purpose these days, such as sha* and bcrypt. With modern hardware, it's fairly easy to throw millions of passwords per second at an md5 hash until you find one that matches the correct password.)
It allows you to verify the integrity of a transmitted file by comparing the md5 hash of the original file with the md5 hash of the data that was received. If the hashes are different, the received data was not the same as the sent data, so you know to re-send it; if they're the same, you can be reasonably certain that the sent and received data are identical.
Good hash functions like MD5 can be used for identification. See this question. Under certain conditions you can assume that equal hashes mean equal data blocks.
MD5 is mainly used to maintain the integrity of files when it is send from 1 machine to another machine,to detect whether any man in middle third party have not modify the contents of files.
Basic example is : When you download any file from server server has MD5 calculated when it comes to you it again check for md5 values if md5 hash matches file is not corrupted or not modified by any third person.
MD5 is a hash function and there are more like that such as SHA, PBKDF, bcrypt and scrypt. I really prefer scrypt. Hash functions are used for integrity reasons in order to detect any manipulations that may occurred during the transmission of the actual message. The receiver is able to find if the received message has not not changed by checking the hash value of the message.
These functions have three security properties:
1) It is difficult for someone to detect the actual message when it only has the h(m).
2) Given a message m and its hash function it is difficult to find another message with the same hash value.
3) Last, it is difficult to find to different messages m1, m2 with the same hash value.
Also, it is important to know that hash function's algorithms are public and it is very easy to compute the hash value of a message. Moreover, hashes are "one-way" functions, meaning that is hard to find the message given the hash of the message. The actual security thus, is based on that property.