When I run my program it will display all content properly, and when I resizing the main window, the layout along with all associated widgets remain fixed, rather than resizing with the main window. I used to increase my all widget and listWidget respect to window computer resolution size but still this not one work properly.
I used this one code finding the system height and width.
QWidget widget;
widget.resize(widget.width(), widget.minimumHeight());
QRect rec = QApplication::desktop()->screenGeometry();
int h = rec.height();
int w = rec.width();
// Increasing the listwidget size
ui->listWidget->setFixedHeight(h);
ui->listWidget->setFixedWidth(w);
//increasing the button size
ui->pushButton->setFixedHeight(h0.2);
ui->pushButton->setFixedWidth(w0.2);
At this link you will find two screenshots that illustrate my problem.
Please resolve to solve my problem. Thanks very much in advance.
When defining the layout of your windows and forms in Qt Designer you have to define each element of your form in advance, in order to have a working layout.
This solution is based on the screenshots provided in the comments to the question. Follow these steps:
Add an empty widget to the central area of your form, if there is nothing there. It will be used as a placeholder for the controls you will add later, and of course you can replace it with whatever widget you want. But you need it there to define a proper layout.
In the property panel, set the horizontal QSizePolicy of this widget to MinimumExpanding.
Add an horizontal spacer to the left side of your progress bar.
Define a minimum/maximum width for the white widget on the left (I guess it's a text area). As an example set the maximum width to 200
pixels.
Make the same for the QTabWidget on the right.
Give a minimum height to the Groupbox on top.
Then give the grid layout to the MainWindow.
You should get something similar in the designer view (I use a dark theme, yours will have different colors of course):
If you complete all steps you should have a nicely resizing window.
For the future: remember to integrally define your layouts, also using placeholder widgets when needed, read carefully the documentation about the widgets size policies (there are several, you need to play with them to fully understand each one) and keep in mind that Qt uses a container based approach which is different, as an example from those used by the .Net framework that relies on the concept of anchors.
EDIT : to answer questions in the comments
You will need to add a layout to any widget that contains other widgets, e.g. adding controls to your groupbox will require to give it a grid, horizontal or vertical layout in order to scale nicely on resize. Again use spacers and size policies to make it look the way you want. If you need to add or remove controls, or change their positions, you may need to brake the layout, rearrange and then set it again.
You can also select groups of widgets and give them a layout e.g. vertical, than another group and set them horizontal and so on... then give a grid layout to the container widget to build a compound layout.
There are endless possibilities, you just need to practice and go through trial and error as for everything else...
You can also do it all programmatically, check the Qt widgets documentation for this. But for complex layouts I would not go that way: it's a lot of code... and you have to compile and run to test every modification.
Using the QtCreator, within the designer you can simply right-click on the parent-widget and add a Grid-Layout.
This one resizes it's children to it's dimensions.
Related
So I currently have got a custom widget, and I want to add them to the main window after clicking a button. I would like to add them all to one fixed position first and then I will be able to drag them wherever I like. I am able to create and display these custom widgets with help of QHBoxLayout or QVBoxLayout, but in this case they will not be in the same position after I create them. Any help will be appreciated!
As the names suggest, the QLayout classes manage the position and geometry of the items added to them. You cannot move (eg. drag) an item out of a layout w/out first removing it from the layout (QLayout::removeItem() and derivatives). For example when you drag a toolbar or dock widget out of a QMainWindow it goes through all sorts of machinations to remove it from the MW layout, change the widget's window flags, remember the old position in the layout, and so on. And the reverse to dock it again.
To do what you describe (drag widgets arbitrarily around a window) you would need to not use a QLayout and position the widgets manually by specifying a QWidget::setGeometry() for example. After initial position, and assuming the user has some way to grab the widget (title bar or drag handle you made, etc), you'll probably still need to manage their positions, for example if the main window is resized (if you care about keeping them contained). Essentially you'd have a bunch of separate widgets acting as individual windows and probably need some way to keep track of them.
I don't know what kind of widgets you're talking about, but one option may be a QMdiArea which lets the user drag windowed widgets around, tabify them, save/restore state, and so on.
For more flexibility you could also look into the Qt Graphics Framework. The graphics scene has a lot of features for user-movable items/widgets, keeping track of them, and so on. It is probably the most flexible method overall, and you can also use regular QWidgets inside a graphics scene.
A couple other Q/A about arbitrarily positioning widgets (I'm sure there are more to be found):
QPushButton alignment on top another widget
How to keep Push Buttons constant in relative to change of Label Size in PyQt4
I have a Qt Widget which has a frame, containg the rest of the widgets.
I only want one of the widgets to expand on maximazing the window, so I've set a max value for the others.
But it will only expand if I set a grid layout to the frame, which messes up the place of the widgets.
How can I solve it?
Do you use any kind of layout ?
Size policy only works if the parent has a layout set.
You can use a combination of different layouts to obtain the desired look, otherwise you will have to calculate the size of the 'expanding widget' yourself in the resize event method of the parent.
My problem probably is very simple, but I have no idea how to solve it.
So, I have several widgets in vertical layout. Some of them in some moment should be invisible. I suppose this moment the control that has expanding vertical policy should increase its height but it never happens. Why? How to force it to change the size? So far there is only one way to do that - to change the size of window manually a little bit and only after it the widget changes its height.
When you make a widget invisible (i.e. call hide), also remove it from the layout (see removeWidget). That way all of the other widgets will automatically resize to make use of the extra space. Since you are only hiding the widget, its space is still reserved in the vertical layout.
Make use of insertWidget to maintain the layout ordering when transitioning a hidden widget back into view. Otherwise, addWidget would always place it at the bottom. This approach should be less complex than managing the sizes manually.
Try calling adjustSize() on the parent of the layout.
Have you tried setting the stretch on 1 for the widget you want to be expanded when others are hidden?
QBoxLayout::addWidget( my_widget, 1 );
When this widget is added with a stretch of 1 and the other widgets without stretch, this widget will expand to the available space. Maybe that will do the trick.
I am new to QT. I'm trying to understand the layout mechanism by trying to implement this small window seen below. It has the following elements under the QWidget that's the main window:
One big QWidget that stretches on all the client area.
Two QWidget containers on the top of the window. Both should have the same height, but the right one stretches horizontally, as the window grows/shrinks.
one button container widget on the top right, with fixed height and width
Large QWidget container filling the rest of the client area, that should resize as the window resizes.
The parent window itself is resizeable.
I'm looking for hints as to what layout I should use. How do I achieve this programatically? define what stretches automatically, what stays with a fix size? and how the proportions are kept where they need to be kept.
I'd appreciate any pointer you may have.
The easiest, and IMHO best, way to accomplish this is via the QHBoxLayout and QVBoxLayouts. You can do this via the designer in QtCreator, but I find it doesn't work perfectly if you need to adapt things over time. If it's a static set of widgets, I do suggest designing it using the QtCreator designer as it'll greatly simplify your life.
If you're going to do it programatically, the main window should be set to use a QVBoxLayout and then two sub-QVBoxLayout's after that, where the bottom one is configured to take any space it can get. Then in the top QVBoxLayout, add a QHBoxLayout with your two upper components.
to set a widget to fixed size in code you call setFixedSize( int h, int w ) on the widget. To do it in Designer click on the widget and look in the property editor in the QWidget section. open the sizePolicy thingy and set horizontal and/or vertical to fixed. Then open Geometry and set the width and Height.
To make them stretch at different ratios in code you use a separate argument when using a box layout. eg layout->addWidget( button1, 1 ); layout->addWidget (button2, 2); this would cause button2 to expand at twice the rate of button1. To do this in designer, open the sizePolicy property of the widgets and set the HorizontalStrech and/or VerticalSretch. Note that the size policy needs to not be Fixed in this case for the direction you want to set the stretch on. Also it will never let a widget shrink below its minimum size (it would rather mess up the ratio than shrink something too small).
For those of you who haven't been reading my Qt questoins, I am learning Qt for a project. I have only limited experience with GUI design at all, and not in Qt.
I've got a horizontal layout that I want to populate with some buttons. I can feed these buttons in just fine, but my formerly-square buttons are stretched horizontally to take up more space.
I want to let the layout manager determine the best way to size these buttons, but I also want their original proportions to remain intact. For instance, if I start would with 32X32 buttons that need to shrink to fit all of them in the layout, I want them to shrink proportionally so that the width to height scale is maintained. 20X20, 16X16, 12X12 would all be just fine, but 24X16 would be an example of dimensions that are unacceptable.
I've tinkered with size policies on the buttons and stretch options. I'm not seeing, even after reading the QPushButton and QHboxLayout classes how to do this. How is it accomplished?
Thanks.
As long as I understand the question correctly, I think what you want is QBoxLayout::addStretch(). This will add a spacer object that fills the unused space. So the buttons will have their ideal size and the spacer will fill the rest. You can try experimenting with this in Designer, it's easier than the write/compile/run cycle.
You should take a look at the answers to this question. This is a recap of my answer there.
You need to create a custom derivative of QLayoutItem, which overrides bool hasHeightForWidth() and int heightForWidth( int width ) to preserve the aspect ratio. You could either pass the button in and query it, or you could just set the ratio directly. You'll also need to make sure the widget() function returns a pointer to the proper button.
Once that is done, you can add a layout item to a layout in the same manner you would a widget. So when your button gets added, change it to use your custom layout item class.
I haven't actually tested any of this, so it is a theoretical solution at this point. I don't know of any way to do this solution through designer, if that was desired.