I have trouble importing the only "MbedTLS" package from the web to Julia. It is required for using Julia in the Jupyter notebook. I've acquired its zipped file from the git
https://github.com/JuliaWeb/MbedTLSBuilder/releases
However, I don't know how to install this successfully to Julia. Could you help me?
The error message is
"security protocol somthing..." and "LoadError : Could not download https://github.com/quinnj/MbedTLSBuilder/releases/download/v0.6/MbedTLS.x86_64-w64-ming32.tar.gz to C:\Users\MYNAME\.julia\v0.6\Mbed"
Furthermore, I reinstalled "IJulia" and then, it appears "stackoverflow" error. what is wrong with this procedure??
I found answer at
https://github.com/ARMmbed/mbedtls/issues/456
and download and install "cmake"
Related
To preface this question I am coming from the perspective of an absolute beginner, trying to learn Julia. I was recommended to try the SciML tutorial and in trying to install it have fallen at the first hurdle.
So far I have:
Installed Julia
Installed Anaconda
Installed Jupyter Notebook
Added "git" through the Anaconda console
Added "IJulia"
From here I have been able to open Jupyter through Anaconda and access Julia 1.7.3 within it. Following this I attempted to follow the instructions on the SciML website for getting started with the tutorial, which is to enter this code:
using Pkg
pkg"add https://github.com/SciML/SciMLTutorials.jl"
using SciMLTutorials
SciMLTutorials.open_notebooks()
However, the second line is throwing this error
invalid git HEAD (reference 'refs/heads/master' not found)
I have also tried installing the package through the Julia console, but recieve the same error.
I am at a loss of how to proceed - I can't find anything in the documentation that suggests why this may be or how to proceed - since I am so new to this I suspect I may have missed a step in my installation process, but can't figure out where that may be.
Installing Quantstrat Issues. I am running the latest versions of R, RStudio, and Rtools. I have installed devtools / remotes packages and cannot seem to get quantstrat installed. enter image description here
I had similar problems too. Installing quantstrat via cmd works well for me. Here are the steps:
Create a folder for packages i.e RPackages\
Download the file from github to that specific folder and extract the files to the library name. i.e RPackages\quantstrat\
go on command line and goto RPackages
Type" R CMD build quantstrat
If it was successful, you will get a message like "building 'package_name_version_number.tar.gz'"
Now type: R CMD INSTALL package_name_version_number.tar.gz
Let me know if you have any other challenges.
I get the following error at step 4:
'R' is not recognized as an internal or external command,
operable program or batch file.
what do I need to do to overcome this.
Here is the fix that worked for me:
There could be version issues depending on what version of R that you have especially for Blotter and PerformanceAnalytics. Since PerformanceAnalytics to install blotter, you must ensure that version force compatibility and the easiest way is just to install it fresh. Start by installing PerformanceAnalytics then blotter then quantstrat and you should be in good shape. Use the code below and let me know how your results turn out. Took me a few hours to solve it, but just got it done today (7/27/2020)
install.packages("PerformanceAnalytics")
remotes::install_github("braverock/blotter")
remotes::install_github("braverock/quantstrat", force = TRUE)
I am trying to install the package Quantstrat on a Mac.
I searched for help in internet but I did not find a solution.
I already tried:
require(devtools)
install_github("braverock/quantstrat")
The error message I get is:
Downloading GitHub repo braverock/quantstrat#master
from URL https://api.github.com/repos/braverock/quantstrat/zipball/master
Installation failed: Could not find build tools necessary to build quantstrat
I solved the issue.
I just needed to open "Xcode" in the Macbook and accept the new terms and conditions. Then I tried again and I was able to download and install Quantstrat.
I was trying to install the package RINDSEL but I am unable to install it and I keep getting the following error:
Error in install.packages : cannot open the connection
I downloaded the package from:
rindsel_1.0_2.zip | Integrated Breeding Platform
and loaded it from the directory. Other packages from the directory can be installed but just not this one.
Is the package corrupt or could there be any other error?
I would really be grateful for any help. Thanks in advance
Rename the zip file RinSel Software into Rindsel. That's the name specified in the discription file.
Then, you can install the package in R with the command
install.packages("C:/path/to/Rindsel.zip",repos=NULL,type="win.binary")
That works fine... at first (!!!).
Problem with the Rindsel package is. It is quite old. It was build with R 2.13.1. Therefore, if you want to load the library which would be the next step to use the package in R you will get the error:
Problems building package (Error: "package has been build before R-3.0.0")
My suggestion: Contact the authors of the package and ask them if they can either provide the source file that you can build the package by yourself or if they can bundle the Rindsel package with a newer R version.
(Or you could try to hunt down an old R version and see if you can get the thing running with an old R... However, I would not seriously suggest to do that. It would probably result in conflicting dependencies with the other required packages...)
EDIT 15-02-2018: OP asked if one can build an R package with sources that are presumeably the Rindsel source files.
Yes, basically, you could do that. You would have to make a your own description and namespace file and put the source file in the R folder than invoke the command in R to build it....
But it's not neccessary with the script files provided by the link the OP posted.
OP, just run the scripts in R! It's quite easy.
Download the zip-file and extract it on your machine.
Go to that directory. The R command would be
setwd('path/to/your/directory')
Than run the R script, e.g, the KNIndex.r. It's simple:
source('KNIndex.r')
Then the script will run and produce some output / prompts.
For future readers,
I was able to fix the error by running RStudio with administrative privileges to get the command to work.
If that does not fix it, you might wish to try
Installing "r tools" if that is not installed already. That can be downloaded from
https://cran.r-project.org/bin/windows/Rtools/
Download a relevant package that you are trying to install (e.g., tidyverse_1.3.0.zip) from https://cran.rstudio.com/
and install that from local path
It can also be installed directly from the web using install.packages("https://cran.rstudio.com/bin/windows/contrib/4.0/tidyverse_1.3.0.zip")
I had the same problem. R was not able to extract and compile the package files to the default installation directory for some system-specific reasons (not R related).
I was able to fix this by specifying the installation directory of the package lib using:
install.packages("your package", lib = 'path/to your/required/installation/directory')
You can then load the package by specifying the lib.loc option while loading it:
library('your package', lib.loc='path/to your/required/installation/directory')
A better solution:
Create a new environment variable (if you are using windows) R_LIBS_USER with the following directory path/to your/required/installation/directory.
This will change the default installation directory of the packages and make it easier to load and install them without specifying the location everytime.
I'm pretty new to R so apologies for a stupid question. I'm trying to get rcpp running but I'm stuck in an endless loop of R asking me to re-install RTools.
I broadly followed the code in this blog post, although first time off I installed everything by hand & I've subsequently re-installed everything a few times over. I'm running Windows 7, R version 3.1.2, R Studio Version 0.98.1091 (not that this should matter much) and RTools 3.1.
An edited highlight of what my console looks like is as follows:
> library(installr)
Welcome to installr version 0.15.3...
> install.Rtools()
Loading required package: devtools
No need to install Rtools - You've got the relevant version of Rtools installed
> find_rtools()
[1] TRUE
> library(Rcpp)
> evalCpp("1+1")
Error in sourceCpp(code = code, env = env, rebuild = rebuild, showOutput = showOutput, :
Error 65535 occurred building shared library.
At which point a dialog box pops up saying:
Install Build Tools
Compiling C/C++ code for R requires installation of additional build tools.
Do you want to install the additional tools now?
And then I get directed to download and re-install RTools 3.1 from cran all over again.
I've seen that this can be an issue with the PATH variable but I've tried various things including:
Nothing (extra) in the PATH variable
Including both references to R (C:\Program Files\R\R-3.1.2\bin\x64) and RTools (C:\RBuildTools\3.1\bin;C:\RBuildTools\3.1\gcc-4.6.3\bin;) in the PATH. Once with RTools first, once with R first
Including just a reference to RTools in the PATH as the initial install file directed me to do.
Any ideas on things to try would be gratefully accepted!
EDIT
Following Dirk's comment it looks like I might have a problem with how RTools is installed. I've followed the instructions from several blogs / tutorials on how to install RTools; all to no avail (yet!)
This GitHub page gives some instructions on how install and check that the installation has worked. I've followed all the checks (see below for copy of the console) and it looks like I have a working install of RTools, but when I try to run evalCPP() again I get the same error as before directing me to install RTools.
> Sys.getenv('PATH')
[1] "C:\\Program Files\\R\\R-3.1.2\\bin\\x64;C:\\RTools\\bin;C:\\RTools\\gcc-4.6.3\\bin;C:\\WINDOWS\\system32;C:\\WINDOWS;C:\\WINDOWS\\System32\\Wbem;C:\\WINDOWS\\System32\\WindowsPowerShell\\v1.0\\;C:\\Program Files (x86)\\Enterprise Vault\\EVClient\\;C:\\Program Files (x86)\\Microsoft SQL Server\\100\\Tools\\Binn\\VSShell\\Common7\\IDE\\;C:\\Program Files (x86)\\Microsoft SQL Server\\100\\Tools\\Binn\\;C:\\Program Files\\Microsoft SQL Server\\100\\Tools\\Binn\\;C:\\Program Files (x86)\\Microsoft SQL Server\\100\\DTS\\Binn\\;C:\\Program Files (x86)\\Microsoft Visual Studio 9.0\\Common7\\IDE\\PrivateAssemblies\\;C:\\Program Files\\Microsoft SQL Server\\110\\Tools\\Binn\\;C:\\Program Files\\Microsoft\\Web Platform Installer\\;C:\\Program Files (x86)\\Microsoft SDKs\\TypeScript\\1.0\\;C:\\Program Files\\Microsoft SQL Server\\100\\DTS\\Binn\\"
Warning message:
printing of extremely long output is truncated
> system('g++ -v')
Using built-in specs.
COLLECT_GCC=C:\RTools\GCC-46~1.3\bin\G__~1.EXE
COLLECT_LTO_WRAPPER=c:/rtools/gcc-46~1.3/bin/../libexec/gcc/i686-w64-mingw32/4.6.3/lto-wrapper.exe
Target: i686-w64-mingw32
Configured with: /data/gannet/ripley/Sources/mingw-test3/src/gcc/configure --host=i686-w64-mingw32 --build=x86_64-linux-gnu --target=i686-w64-mingw32 --with-sysroot=/data/gannet/ripley/Sources/mingw-test3/mingw32mingw32/mingw32 --prefix=/data/gannet/ripley/Sources/mingw-test3/mingw32mingw32/mingw32 --with-gmp=/data/gannet/ripley/Sources/mingw-test3/mingw32mingw32/prereq_install --with-mpfr=/data/gannet/ripley/Sources/mingw-test3/mingw32mingw32/prereq_install --with-mpc=/data/gannet/ripley/Sources/mingw-test3/mingw32mingw32/prereq_install --disable-shared --enable-static --enable-targets=all --enable-languages=c,c++,fortran --enable-libgomp --enable-sjlj-exceptions --enable-fully-dynamic-string --disable-nls --disable-werror --enable-checking=release --disable-win32-registry --disable-rpath --disable-werror CFLAGS='-O2 -mtune=core2 -fomit-frame-pointer' LDFLAGS=
Thread model: win32
gcc version 4.6.3 20111208 (prerelease) (GCC)
> system('where make')
C:\Rtools\bin\make.exe
I've also had a look at Appendix D of R Installation and Admin. I can't see anything in here I've not already tried except for section D.4 which implies I might need to rebuild rcpp from source using my installed RTools. I don't have time to do this right away but will give it a try unless people say this route is not worth my time.
EDIT v2
So I tried building rcpp from source ... and that didn't work either. I downloaded both the package source and windows binaries from the CRAN Rcpp package page. In the R console I now get:
> install.packages(pkgs = "C:/Rcpp_0.11.4.tar.gz", repos = NULL, contriburl = NULL, type = "source", verbose = TRUE)
Installing package into ‘C:/Users/james.macadie/Documents/R/win-library/3.1’
(as ‘lib’ is unspecified)
system (cmd0): C:/PROGRA~1/R/R-31~1.2/bin/x64/R CMD INSTALL
Warning in install.packages :
package ‘C:/Rcpp_0.11.4.tar.gz’ is not available (for R version 3.1.2)
I guess my active questions now boil down to:
Reading the whole of the post above can anyone tell me how to fix things so it just works? Or, failing that...
What tests can I run to check I really do have Rtools installed correctly? Everything I have found on the internet suggests I do: system('where make') etc. However, the evidence of being unable to run evalCpp or other rccp functions suggests I don't.
What am I doing wrong when building from source? Should I try the command line option?
EDIT v3
Running evalCpp with showOutput= TRUE and verbose = TRUE I think I've tracked the error back to R CMD SHLIB not working. I followed this blog, which shows how to work with the command line R directly. However when I get to the line R CMD SHLIB sequence_examples.c the execution just skips straight to the next command line without doing anything, generating any files in the directory or throwing any errors. I tried running the --help options at the command line but get the same sort of error:
C:\Users\james.macadie> R --help
Or: R CMD command args
where 'command' is one of:
INSTALL Install add-on packages
REMOVE Remove add-on packages
SHLIB Make a DLL for use with dynload
BATCH Run R in batch mode
build Build add-on packages
check Check add-on packages
Rprof Post process R profiling files
Rdconv Convert Rd format to various other formats
Rdiff difference R output files
Rd2pdf Convert Rd format to PDF
Rd2txt Convert Rd format to pretty text
Stangle Extract S/R code from vignette
Sweave Process vignette documentation
config Obtain configuration information about R
open Open a file via Windows file associations
texify Process a latex file
Use
R CMD command --help
for usage information for each command.
C:\Users\james.macadie> R CMD SHLIB --help
C:\Users\james.macadie>
N.B. for people reading the earlier code samples higher up this post I have changed a few things since those code snapshots:
I've installed R directly into C:\R. It used to be in C:\Program Files\R\ but as has been suggested file paths with spaces in can cause problems
I'm referencing Rtools under C:\Rtools\ and not C:\RBuildTools\
Thanks for any suggestions, as ever
Had the same endless loop issue when trying to install Twitter's BreakoutDetection (which is also written in cpp)
fixed by executing the following
Sys.setenv(PATH="%PATH%;C:/Rtools/gcc-4.6.3/bin;c:/Rtools/bin")
and then answering "no" when presented with the following prompt:
"Install Build Tools Compiling C/C++ code for R requires installation of additional build tools. Do you want to install the additional tools now?"
Didn't try these actions independently so not sure if either on their own would have fixed the issue
I found that ensuring all of these were in my path fixed it. I did this with RStudio closed; I didn't reboot after.
C:\Program Files\R\R-3.1.3\bin\x64
C:\Program Files\R\R-3.1.3\bin
C:\RBuildTools\3.2\bin
C:\RBuildTools\3.2\gcc-4.6.3\bin64
C:\RBuildTools\3.2\gcc-4.6.3\bin
C:\RBuildTools\3.2\gcc-4.6.3\i686-w64-mingw32\bin
These are on my Win7-64bit computer. YMMV, and I'm mostly posting this to ensure others see it if they are having the same issue.
In the end it was something a bit left-field. Inspired by the following post, I had a look at the ComSpec environment variable. Not quite sure how, but I had it set to "cmd.exe".
Removing the double quotes, so it said cmd.exe, and then rebooting fixed everything.
Thanks to all who've tried to help.
I experienced the same problem, I fixed this problem by adding Rtools dir into env variables:
Sys.setenv(BINPREF = "C:/Rtools/mingw_$(WIN)/bin/")