R operator overloading - r

Does anyone know how to overload the [] operator in R?
`[]` <- function(a, b) a + b
x = 5
y = 5
x[]y
Error: unexpected symbol in "x[]y"
R operator overloading seems to work for all other symbols except the []and ().

Related

[julia]syntax: invalid assignment location "getproperty(f, n)"

My julia version is 1.7.1.
These code can recurrent my problem:
struct Foo1
sixsix
aa
bb
disposion
end
struct Foo2
aa
bb
end
function Base.:+(f1::Foo1, f2 :: Foo2)
newf = f1
for n in fieldnames(typeof(f2))
getproperty(newf, n) += getproperty(f2, n)
end
return newf
end
returned LoadError: syntax: invalid assignment location "getproperty(newf, n)"
same LoadError happened when I try to use getfield:
function Base.:+(f1::Foo1, f2 :: Foo2)
newf = f1
for n in fieldnames(typeof(f2))
getfield(newf, n) += getfield(f2, n)
end
return newf
end
Firstly, you must make your structs mutable for this to work.
Secondly, this:
getproperty(newf, n) += getproperty(f2, n)
is expanded into
getproperty(newf, n) = getproperty(newf, n) + getproperty(f2, n)
In other words you are apparently trying to assign a value into a function call. In Julia you can only assign to variables, not to values. The only thing this syntax is allowed for is function definition. From the manual:
There is a second, more terse syntax for defining a function in Julia.
The traditional function declaration syntax demonstrated above is
equivalent to the following compact "assignment form":
julia> f(x,y) = x + y
f (generic function with 1 method)
So the syntax you are using doesn't do what you want, and what you want to do is not possible anyway, since you can only assign to variables, not to values.
What you are trying to do can be achieved like this (assuming n is a Symbol):
setfield!(newf, n, getfield(newf, n) + getfield(f2, n))
I would rather recommend you to do the following:
Base.:+(f1::Foo1, f2 :: Foo2) =
Foo1(f1.sixsix, f1.aa+f2.aa, f1.bb+f2.bb, f1.disposion)
Your code is wrong for the following reasons:
Foo1 is not mutable, so you cannot change values of its elements
to set a field of mutable struct (which your struct is not) you use setfield!
You mix properties and fields of a struct which are not the same.
fieldnames works on types not on instances of type.
If you wanted to be more fancy and do automatic detection of matching fields you could do:
Base.:+(f1::Foo1, f2 :: Foo2) =
Foo1((n in fieldnames(Foo2) ?
getfield(f1, n) + getfield(f2, n) :
getfield(f1, n) for n in fieldnames(Foo1))...)
However, I would not recommend it, as I feel that it is overly complicated.

Ternary operator and range in Julia

I went to this error by chance which I fixed with some diverted way, but still I was curious how it is solved for Julia.
Suppose the MWE:
julia> a = 1 ; b = 5 ; some_logical_value = true
julia> #assert a > 0 ? b in 1:10 : some_logical_value
ERROR: syntax: space required before colon in "?" expression
Stacktrace:
[1] top-level scope at none:1
Which yields an error as, not surprisingly : from ternary operator and : from 1:10 is misleading for Julia. How should we do so?
You just need to add parentheses enclosing the range expression, so either of
#assert a > 0 ? b in (1:10) : some_logical_value
or
#assert a > 0 ? (b in 1:10) : some_logical_value
should work.

Julia Metaprogramming: Function for Mathematical Series

I'm trying to build a function that will output an expression to be assigned to a new in-memory function. I might be misinterpreting the capability of metaprogramming but, I'm trying to build a function that generates a math series and assigns it to a function such as:
main.jl
function series(iter)
S = ""
for i in 1:iter
a = "x^$i + "
S = S*a
end
return chop(S, tail=3)
end
So, this will build the pattern and I'm temporarily working with it in the repl:
julia> a = Meta.parse(series(4))
:(x ^ 1 + x ^ 2 + x ^ 3 + x ^ 4)
julia> f =eval(Meta.parse(series(4)))
120
julia> f(x) =eval(Meta.parse(series(4)))
ERROR: cannot define function f; it already has a value
Obviously eval isn't what I'm looking for in this case but, is there another function I can use? Or, is this just not a viable way to accomplish the task in Julia?
The actual error you get has to do nothing with metaprogramming, but with the fact that you are reassigning f, which was assigned a value before:
julia> f = 10
10
julia> f(x) = x + 1
ERROR: cannot define function f; it already has a value
Stacktrace:
[1] top-level scope at none:0
[2] top-level scope at REPL[2]:1
It just doesn't like that. Call either of those variables differently.
Now to the conceptual problem. First, what you do here is not "proper" metaprogramming in Julia: why deal with strings and parsing at all? You can work directly on expressions:
julia> function series(N)
S = Expr(:call, :+)
for i in 1:N
push!(S.args, :(x ^ $i))
end
return S
end
series (generic function with 1 method)
julia> series(3)
:(x ^ 1 + x ^ 2 + x ^ 3)
This makes use of the fact that + belongs to the class of expressions that are automatically collected in repeated applications.
Second, you don't call eval at the appropriate place. I assume you meant to say "give me the function of x, with the body being what series(4) returns". Now, while the following works:
julia> f3(x) = eval(series(4))
f3 (generic function with 1 method)
julia> f3(2)
30
it is not ideal, as you newly compile the body every time the function is called. If you do something like that, it is preferred to expand the code once into the body at function definition:
julia> #eval f2(x) = $(series(4))
f2 (generic function with 1 method)
julia> f2(2)
30
You just need to be careful with hygiene here. All depends on the fact that you know that the generated body is formulated in terms of x, and the function argument matches that. In my opinion, the most Julian way of implementing your idea is through a macro:
julia> macro series(N::Int, x)
S = Expr(:call, :+)
for i in 1:N
push!(S.args, :($x ^ $i))
end
return S
end
#series (macro with 1 method)
julia> #macroexpand #series(4, 2)
:(2 ^ 1 + 2 ^ 2 + 2 ^ 3 + 2 ^ 4)
julia> #series(4, 2)
30
No free variables remaining in the output.
Finally, as has been noted in the comments, there's a function (and corresponding macro) evalpoly in Base which generalizes your use case. Note that this function does not use code generation -- it uses a well-designed generated function, which in combination with the optimizations results in code that is usually equal to the macro-generated code.
Another elegant option would be to use the multiple-dispatch mechanism of Julia and dispatch the generated code on type rather than value.
#generated function series2(p::Val{N}, x) where N
S = Expr(:call, :+)
for i in 1:N
push!(S.args, :(x ^ $i))
end
return S
end
Usage
julia> series2(Val(20), 150.5)
3.5778761722367333e43
julia> series2(Val{20}(), 150.5)
3.5778761722367333e43
This task can be accomplished with comprehensions. I need to RTFM...
https://docs.julialang.org/en/v1/manual/arrays/#Generator-Expressions

Using invalid character "²" for squared. Extend Julia syntax with custom operators

In my equations we have many expressions with a^2, and so on. I would like to map "²" to ^2, to obtain something like that:
julia> a² == a^2
true
The above is not however a legal code in Julia. Any idea on how could I implement it ?
Here is a sample macro #hoo that does what you requested in a simplified scenario (since the code is long I will start with usage).
julia> x=5
5
julia> #hoo 3x² + 4x³
575
julia> #macroexpand #hoo 2x³+3x²
:(2 * Main.x ^ 3 + 3 * Main.x ^ 2)
Now, let us see the macro code:
const charsdict=Dict(Symbol.(split("¹²³⁴⁵⁶⁷⁸⁹","")) .=> 1:9)
const charsre = Regex("[$(join(String.(keys(charsdict))))]")
function proc_expr(e::Expr)
for i=1:length(e.args)
el = e.args[i]
typeof(el) == Expr && proc_expr(el)
if typeof(el) == Symbol
mm = match(charsre, String(el))
if mm != nothing
a1 = Symbol(String(el)[1:(mm.offset-1)])
a2 = charsdict[Symbol(mm.match)]
e.args[i] = :($a1^$a2)
end
end
end
end
macro hoo(expr)
typeof(expr) != Expr && return expr
proc_expr(expr)
expr
end
Of course it would be quite easy to expand this concept into "pure-math" library for Julia.
I don't think that there is any reasonable way of doing this.
When parsing your input, Julia makes no real difference between the unicode character ² and any other characters you might use in a variable name. Attempting to make this into an operator would be similar to trying to make the suffix square into an operator
julia> asquare == a^2
The a and the ² are not parsed as two separate things, just like the a and the square in asquare would not be.
a^2, on the other hand, is parsed as three separate things. This is because ^ is not a valid character for a variable name and it is therefore parsed as an operator instead.

How do I evaluate the function in only one of its variables in Scilab

How do I evaluate the function in only one of its variables, that is, I hope to obtain another function after evaluating the function. I have the following piece of code.
deff ('[F] = fun (x, y)', 'F = x ^ 2-3 * y ^ 2 + x * y ^ 3');
fun (4, y)
I hope to get 16-3y ^ 2 + 4y ^ 3
If what you want to do is to write x = f(4,y), and later just do x(2) to get -36, that is called partial application:
Intuitively, partial function application says "if you fix the first arguments of the function, you get a function of the remaining arguments".
This is a very useful feature, and very common Functional Programming Languages, such as Haskell, but even JS and Python now are able to do it. It is also possible to do this in MATLAB and GNU/Octave using anonymous functions (see this answer). In Scilab, however, this feature is not available.
Workround
Nonetheless, Scilab itself uses a workarounds to carry a function with its arguments without fully evaluating. You see this being used in ode(), fsolve(), optim(), and others:
Create a list containing the function and the arguments to partial evaluation: list(f,arg1,arg2,...,argn)
Use another function to evaluate such list and the last argument: evalPartList(list(...),last_arg)
The implementation of evalPartList() can be something like this:
function y = evalPartList(fList,last_arg)
//fList: list in which the first element is a function
//last_arg: last argument to be applied to the function
func = fList(1); //extract function from the list
y = func(fList(2:$),last_arg); //each element of the list, from second
//to last, becomes an argument
endfunction
You can test it on Scilab's console:
--> deff ('[F] = fun (x, y)', 'F = x ^ 2-3 * y ^ 2 + x * y ^ 3');
--> x = list(fun,4)
x =
x(1)
[F]= x(1)(x,y)
x(2)
4.
--> evalPartList(x,2)
ans =
36.
This is a very simple implementation for evalPartList(), and you have to be careful not to exceed or be short on the number of arguments.
In the way you're asking, you can't.
What you're looking is called symbolic (or formal) computational mathematics, because you don't pass actual numerical values to functions.
Scilab is numerical software so it can't do such thing. But there is a toolbox scimax (installation guide) that rely on a the free formal software wxmaxima.
BUT
An ugly, stupid but still sort of working solution is to takes advantages of strings :
function F = fun (x, y) // Here we define a function that may return a constant or string depending on the input
fmt = '%10.3E'
if (type(x)==type('')) & (type(y)==type(0)) // x is string is
ys = msprintf(fmt,y)
F = x+'^2 - 3*'+ys+'^2 + '+x+'*'+ys+'^3'
end
if (type(y)==type('')) & (type(x)==type(0)) // y is string so is F
xs = msprintf(fmt,x)
F = xs+'^2 - 3*'+y+'^2 + '+xs+'*'+y+'^3'
end
if (type(y)==type('')) & (type(x)==type('')) // x&y are strings so is F
F = x+'^2 - 3*'+y+'^2 + '+x+'*'+y+'^3'
end
if (type(y)==type(0)) & (type(x)==type(0)) // x&y are constant so is F
F = x^2 - 3*y^2 + x*y^3
end
endfunction
// Then we can use this 'symbolic' function
deff('F2 = fun2(y)',' F2 = '+fun(4,'y'))
F2=fun2(2) // does compute fun(4,2)
disp(F2)

Resources