I'm trying to install php unit version 6.5.
I already have 7.0.1 install and I have attempted to install phpunit versions 6.5 with:
brew install phpunit#6.5
Brew tells me that the older version is installed but phpunit --version is 7.0.1.
Trying brew switch phpunit 6.5, I get the message:
Error: phpunit does not have a version "6.5" in the Cellar.
Versions available: 7.0.1
What steps do I need to take to switch versions to 6.5?
I've installed manually:
$ wget https://phar.phpunit.de/phpunit-6.5.phar
$ chmod +x phpunit-6.5.phar
$ sudo mv phpunit-6.5.phar /usr/local/bin/phpunit
$ phpunit --version
If I am not mistaking, this is because the current version is 6.5.6 and not just 6.5
If this fails, maybe try doing a manual install from their archived package, instructions can be found here
If you still don't succeed, you could also try with composer to manage your project packages
Related
sudo apt-get install python3.7
Reading package lists... Done
Building dependency tree
Reading state information... Done
python3.7 is already the newest version (3.7.10-1+bionic2).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
N: Ignoring file 'security' in directory '/etc/apt/sources.list.d/' as it has no filename extension
root#ubuntu:~# python3 -V
Python 3.6.9
I presume you are a Linux user. I faced a similar issue when I was trying to install Python
3.9 but when I ran python -V in the terminal, it would tell me I had version 2.
I can't guarantee
this will work but it worked for me. If you are using Ubuntu 20.04 a Linux distro, by default you have Python 3.9. In Ubuntu 18 and 16 there is also a Python version pre-installed. In your case, you need to first uninstall Python 3.
Using this command in the terminal.
sudo apt-get remove --purge python3
After uninstalling, reinstall as Python 3.9 version using this command:
sudo apt update
sudo apt install software-properties-common
sudo add-apt-repository ppa:deadsnakes/ppa
sudo apt install python3.9
python3.9 --version
Again if you're using an editor like Pycharm your base interpreter will be messed up! So please be careful when uninstalling.
And this code works on Ubuntu which I presume is what you are working on.
Another thing you need to install a repository to get Py 3.9. it's called deadsnakes I've mentioned the code above on how you could install it.
I hope you faced no issues. Remember it worked for me but I'm not sure it will work for you. Enjoy with Python 3.9 if the installation is successful :)
Getting the following error after running pip install airflow[postgres] command:
> raise RuntimeError("By default one of Airflow's dependencies installs
> a GPL "
>
> RuntimeError: By default one of Airflow's dependencies installs a GPL
> dependency (unidecode). To avoid this dependency set
> SLUGIFY_USES_TEXT_UNIDECODE=yes in your environment when you install
> or upgrade Airflow. To force installing the GPL version set
> AIRFLOW_GPL_UNIDECODE
I am trying to install in Debian 9
Try the following:
export AIRFLOW_GPL_UNIDECODE=yes
OR
export SLUGIFY_USES_TEXT_UNIDECODE=yes
Using export makes the environment variable available to all the subprocesses.
Also, make sure you are using pip install apache-airflow[postgres] and not pip install airflow[postgres]
Which should you use: if using AIRFLOW_GPL_UNIDECODE, airflow will install a dependency that is under GPL license, which means you won't be able to distribute your resulting application commercially. If that's a problem for you, go for SLUGIFY_USES_TEXT_UNIDECODE.
If you are installing using sudo run one of these commands:
sudo AIRFLOW_GPL_UNIDECODE=yes pip3 install apache-airflow
OR
sudo SLUGIFY_USES_TEXT_UNIDECODE=yes pip3 install apache-airflow
NOTE: If pip3 (python3) does not work for you, try pip command.
The pip command can be pointing to python2 or python3 installation depending on your system. Verify this by running pip --version.
Windows users can use the command below before installing apache-airflow:
$ set AIRFLOW_GPL_UNIDECODE=yes
then
$ pip install apache-airflow
In case you are installing the airflow on Windows and through Python terminal then you need to write this:
Set SLUGIFY_USES_TEXT_UNIDECODE=yes
pip install apache-airflow[postgres]
It worked with me after I struggled with trying many other options. Hope this will work with you too.
Below command should install apache-airflow and lets you pull changes into PyCharm for building DAGs and coding for Airflow.
SLUGIFY_USES_TEXT_UNIDECODE=yes
pip install apache-airflow
Also, if you are installing using sudo you can use:
export AIRFLOW_GPL_UNIDECODE='yes'
sudo -E pip3 install apache-airflow
(or use SLUGIFY_USES_TEXT_UNIDECODE)
Run the following command in your python terminal: SLUGIFY_USES_TEXT_UNIDECODE=yes pip install apache-airflow==1.10.0
Use below command to install apache-airflow
sudo SLUGIFY_USES_TEXT_UNIDECODE=yes \
pip install apache-airflow[async,devel,celery,crypto,druid,gcp_api,jdbc,hdfs,hive,kerberos,ldap,password,postgres,qds,rabbitmq,s3,samba,slack]
So I tried to install R (after repairing ubuntu on my system) using following command :
sudo apt-get install r-base-core
sudo apt-get install r-recommended
It installs R 3.2 , but the latest version of R currently available to use is R 3.4, any idea why it is not installing R 3.4 ?
I lately installed R.3.4 manually, it works fine. just curious to know why it didn't installed at the first place using the command.
Follow these steps:
Add this entry deb https://cloud.r-project.org/bin/linux/ubuntu xenial/ to your /etc/apt/sources.list file.
Run this command in shell: sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys E084DAB9.
Update and install: sudo apt update; sudo apt install r-base.
I wrote a post that explains each step in detail (update: also covers installing R on Ubuntu 18.04); here's the link.
It installs 3.2 because that's the default in the Ubuntu 16.04 repository. If you want the most up to date version of R for Ubuntu it's best to follow the instructions at the cran page for R on Ubuntu.
The xenial-cran35/ version of the repo does NOT work if you have a "default release" set in apt, as is the case in some distros that work on top of Ubuntu, such as Mint. For my Mint distro, there exists a file /etc/apt/apt.conf.d/01ubuntu inside of which it declares the Default-Release "xenial"; What this means is that, since r-base exists in the ubuntu repo at version 3.2, with release "xenial", it'll never use the 3.6 branch from the other repo, because the release name for that repo is "xenial-cran35". You need to edit that file to change the default release to "xenail-cran35", or do something more pointed using apt preference files (https://wiki.debian.org/AptPreferences#A.2Fetc.2Fapt.2Fpreferences).
This is basically R's fault for having a poorly formatted repo. They should have had 2 repos, each of which had a "xenial" release folder, one url for their 3.2 branch work and one for the 3.5+ branch work. Instead they have one repo, and have bastardized the "release name" instead, which just sort of happens to work for base Ubuntu, but won't work if you have non-base configuration of apt in this way.
Here is a list of the steps that I did in order to attempt to install Octave 4.2.1 in Centos 7 (repo version is 3.8.2 which is really old now)
1) yum update
2) yum-builddep -y octave
3) yum -y install qt-devel mercurial gcc-c++ lapack-devel libtool
4) yum -y install epstool transfig pstoedit qscintilla-devel
(NOTE: First problem was right here as there is NO pstoedit in Centos 7, as far as I know)
5) sudo yum install bzip2-devel atlas-devel libsndfile-devel portaudio-devel GraphicsMagick-c++-devel
6) ln -s /usr/lib64/atlas/libtatlas.so /usr/lib64/libatlas.so (One of the tutorials recommended doing this to fix a place where a library was being searched for or something like that. It seemed harmless enough)
7) wget ftp://ftp.gnu.org/gnu/octave/octave-4.2.1.tar.gz
8) tar-xvf octave-4.2.1.tar.lz
9) cd octave-4.2.1
10) export JAVA_HOME=/usr/lib/jvm/java-1.8.0-openjdk
11) ./configure --prefix=/usr/local/octave/versions/4.2.1
12) make -j4
It failed with this error:
In file included from libgui/src/settings-dialog.cc:31:0:
libgui/src/ui-settings-dialog.h:13:29: fatal error: QtWidgets/QAction: No such file or directory
#include <QtWidgets/QAction>
Has anyone come up with this problem and has some workaround or solution? Thanks
QtWidgets/QAction is specific to Qt5, and it seems that when you executed yum-builddep -y octave it got dependencies for Qt4. Configure octave with the option --with-qt=4. Another option is to install qt5 libraries and its devel files, configure --with-qt=5, and make.
Or you can just use Flatpack to install the latest version of Octave without any hassle:
flatpak install flathub org.octave.Octave
flatpak run org.octave.Octave
CentOS 7 already comes with built-in Flatpack app, but your distro doesn't have one you can install it:
sudo yum install flatpak
flatpak remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo
Official website:
https://flatpak.org/setup/
I need help on installing saltstack on RHEL 7.
RHEL 7 server is from AWS Amazon.
$ cat /etc/redhat-release
Red Hat Enterprise Linux Server release 7.0 (Maipo)
I'm getting an error during installation:
$ wget -O - http://bootstrap.saltstack.org | sudo sh
2014-08-04 09:41:45 (932 KB/s) - written to stdout [177548/177548]
INFO: Found function install_red_hat_enterprise_linux_7_stable_deps
INFO: Found function install_red_hat_enterprise_linux_stable
INFO: Found function install_red_hat_enterprise_linux_stable_post
INFO: Found function install_red_hat_enterprise_linux_restart_daemons
INFO: Found function daemons_running
INFO: Running install_red_hat_enterprise_linux_7_stable_deps()
ERROR: Stable version is not available on RHEL 7 Beta/RC. Please set installation type to git.
ERROR: Failed to run install_red_hat_enterprise_linux_7_stable_deps()!!!
Is this version of RHEL 7 not supported for saltstack?
Run the following commands to install from the latest develop branch:
curl -o install_salt.sh -L https://bootstrap.saltstack.com
sudo sh install_salt.sh -M git develop
Remove the -M from the command above if you don't want to install a salt-master and only want to install salt-minion.
I have a similar problem, I tried to install it from epel 7 beta, but there's another problem, see https://bugzilla.redhat.com/show_bug.cgi?id=1127348. Finally I was able to install it by combining pip and yum. I don't have the exact sequence of commands, but sth. like this should work:
yum install --skip-broken salt python-pip
pip install jinja2
I have tried installing SaltStack on CentOS 7 , which should be similar to Redhat 7, and you could try it, hope it works for you:
**[updated]** http://dl.fedoraproject.org/pub/epel/7/x86_64/e/epel-release-7-2.noarch.rpm
and then you could
yum install -y salt-master
or
yum install -y install salt-minion
to install it.
You need to enable the rhel-7-server-optional-rpms repo in subscription-manager.