My case would be, I would like to share my minishift instance to my intranet network.
It looks like there is no option to choose the network / IP, e.g. if you try to set the virtualbox network interface to "bridge", it would just fail
So I would like to setup port forwarding, e.g. http://blog.brianjohn.com/forwarding-ports-in-os-x-el-capitan.html
In this case I am able to access to the web console, e.g. redirect port of machine IP:PORT to 192.168.64.4:8443 (minishift)
But all the API, e.g. "https://192.168.64.4:8443/api/v1" are still using the internal IP, which of course it can not be accessed externally.
Are there any way to make it work properly?
When I need to access minishift from other hosts, I use SSH tunneling.
First you need to enable SSH access in your OSX and make sure you enable AllowTcpForwarding. Then create another user in your laptop to login via SSH.
From other hosts you need to login using SSH with following command:
ssh -L 8443:192.168.64.4:8443 user#<you_laptop_IP_address>
Keep the user logged in so that you can access your minishift web console using browser to https://localhost:8443
Related
I'm currently trying to setup a tunneling tool, specific for game servers.
So you can start the server locally and everyone can join without open your ports or getting unsecure.
Basicly I do a reverse ssh tunnel to one of my dedicated linux servers where the game port get mapped to a different port (for example 8888). So the server is now exposed to the internet and available for anyone and the user don't have to get unsecure and open his own ports. Everyone can connect to the following ip: SERVERADRESS:8888.
The command which gets executed looks like this:
ssh -N -R "*:8888:localhost:25565" root#SERVERADRESS
This works fine just as i want. But I also want to secure my "forwarding" server, so I'm relativ new to networking but I found reverse proxy's. I watched some tutorials and I installed the "Nginx Proxy Manager" tool which comes with a web interface and looks very good and easy. So there is an option to create an Stream (Picture below), there you can enter the incoming port and the forward Host + port, for example: REVERSEPROXY:7777 -> FORWARDINGSERVER:8888. So with this I want to hide the ip adress from the server where all the ssh tunnels. Sadly this Stream tool won't work, I already saw some other topics with that. They all said to enter the port into the docker-compose.yml which I already did + restart. But for now it won't work. Any other soloutions for this problem? Or completly different ideas to protect my server?
https://i.stack.imgur.com/FolLe.png https://i.stack.imgur.com/KuJbt.png https://i.stack.imgur.com/2SN4a.png https://i.stack.imgur.com/9kzbj.jpg
I try to do my own tunneling tool, but with a protection so that my server getting damaged.
I have a domain name registered and i made an A record on it that points to 127.0.0.1 (aka localhost). I want to be able to work on websites in this case from machines that are in the same network as the server its running on but those servers are not open to the public internet. I still want to use my test subdomain to access this website but that would point to the machine im working on at that time so it must forward the requests to an 192.168.. ip adress I have set entered on the machine. Is there a windows command i could use that forwards localhost to a specific ipadress, like linux has 'iptables'? Or a program that could do this? Preferably for free.
I dont want to add my internal ipadress to a dns record because that would be sensitive information.
What about adding an entry to /etc/hosts (linux) or c:\Windows\System32\Drivers\etc\hosts (windows) ?
The format is: <ip address> <servernname>, e.g.: 192.168.10.12 www.stackoverflow.com.
Once you did that, accessing http://www.stackoverflow.com from the machine where the hosts file has been edited will end up being served by the server running on 192.168.10.12.
I am currently running a service with systemctl, and it is running as an http proxy, not normal http. Is this something that Google does? I am using port 8080 and I can't connect to it via http. My daemon is using port 8080, while using the type http-proxy (I am seeing this with the command nmap -sV -sC -p 8080 35.208.25.61 -vvvv -Pn). Instead, I want the daemon I'm running (wings.service) to use http, so it can use that type of connection to connect to my panel.
The panel is part of a piece of software along with the daemon, it's called pterodactyl. Anyways, I have tried everything on what to do, and I think this problem that I am addressing is the problem that causes dysfunction on my panel. I might just have to move to a different service to host my bots for discord.
Let me know if there's anything I can do to fix this.
As per I can understand you are unable to access the panel via web URL.
Pterodactyl web server can be installed using NGINX or Apache web servers, and both web servers by default listed on port 80 based on Pterodactyl web server installation guide, so you must enable HTTP port 80 traffic on your Compute Engine VM instance
The default firewall rules on GCP do not allow HTTP or HTTPS connections to your instances. However, it is fairly simple to add a rule that does allow them following this steps:
1.-Go to the VM instances page.
2.- Click the name of the desired instance.
3.- Click Edit button at the top of the page.
4.- Scroll down to the Firewalls section.
5.- Check the Allow HTTP or Allow HTTPS options under your desired VPC network.
6.- Click Save.
Note: The Pterodactyl panel and Daemon installation are not the same for each operating system, if after checking the VPC firewall rules on the VM settings and also the status of the web server in the instance (NGINX or Apache) you still cannot access your panel, please provide a step by step list with all commands you followed to complete the installation, including the OS version you used.
Hi i am developing a website and want to test it on local machine
the flow is like this:
A -- my website
B -- third-party website
From A a request is sent to B with a url eg: http://mywebsite/abc.aspx which is a url on which B reports success or error.
so i need to define the url to report to
for this i need to give a absolute url or path.
thats why i cannot test it on local machine and have to upload it and test it.
but this doesn't allows me to track down errors and debug it.(through break points.)
so i am trying to get the local machine address like "http://123.456.7.8/abc.aspx"
but doesn't seems to work.
my pc is running on windows xp and is connected to router and my pc is in a network and i think that's why gets a dynamic IP.
have also tried public ip address but no luck.
any work around or help for this.
I believe you're trying to get an external website to contact your local PC. Your local PC is behind a router and getting a private IP from your local router.
You'll need to supply the external website with an address that has the external IP of your router and configure your router to forward incoming requests to yuor PC.
i.e. to forward port 80 on the router to port 80 on your XP machine.
Thus when the external website, tries the contact http://1.2.3.4/abc.aspx it will talk to your router, that will then pass ("forward") the request onto your PC at e.g. http://192.168.0.1/abc.aspx.
I believe You can try to use your Machine name.
You can set up a local DNS server or simply utilize hosts file, to cheat your web browsers. For example, register test.com to your machine's IP address, and then you can use http://test.com to access IIS default web site (or your web site on IIS if you configure it for the default URL).
http://en.wikipedia.org/wiki/Hosts_%28file%29
This is a typical approach to test out web application locally.
try hosting your website on IIS and then give fix IP to your system and try to access it with your IP. Another thing is get your global IP (you can check it from Whatismyip.com ) and set it in your binding in IIS for getting request to it from across the internet.
This is driving me nuts. I am trying to setup a webiste on our dev server with a specific url name www.mystpidsite.com as an example. mystupidsite is not the same name as the dev server.
1) specify a specific url to use for the website I create in IIS
2) run it and use that url to access it
I have:
1) created a new site in IIS 7 in Server 2008
2) attempted to access it via the site name which I set to the desired url and port 8888. So if we want it to be www.mystupidsite.com I setup the website name to mystupidsite in IIS 7.
3) I even tried to create an application under mystupidsite with the same name in IIS 7.
The server is definitely accessible and pingable on the network from my local PC, we have other stuff installed on this new server. Do I need to create an application or is just creating the website enough in IIS 7? I specified the IP as the server's IP in the website I made.
For the host name in the bindings of the site I put www.mystupidsite.com
when I try to access the site via www.mystupidsite.com it can't find it and the site in IIS7 on the dev server is running. It's running on a HyperV instance which is our dev server. Everything else has worked just fine. I just wnat to understand how to get a specific url by name setup.
Do I need to add something in the hosts file on the server or something?
You're not going to be able to have a site on your dev box answer to both the mystpidsite.com and mystupidsite.com domain names.
Unless you have the domains registered and have your domain's nameserver directing that name to your dev machine, IIS is only going to answer to requests either the machine name on the network or the IP address of your machine (in addition to 127.0.0.1 and localhost).
The only thing you're going to be able to do outside that scenario is set up two sites on two different ports on your machine and access them from http://localhost:80 and http://localhost:8888 (or network computer name equivalent).
you need to have an entry in dns to be able to hit the server when using www.mystupidsite.com
Because you have the site running on an alternate port you should be able to get to it by http://your-server-IP-address:8888
If you want to test it locally using the host name and do not have access to dns you can add the appropriate entries to the hosts file on your local machine (c:\windows\system 32\drivers\etc\hosts)
What happens when you type 'nslookup www.mystupidsite.com'? Do you get the IP address of the virtual server?
Do you have the windows firewall enabled on the server? if so, did you add an exception for port 8888?
add a default binding (no host header / blank) and try accessing it by IP