2017/10/10 10:22:26 [crit] 1289#0: *1 connect() to 127.0.0.1:8080 failed (13: Permission denied) while connecting to upstream, client: 81.x.x.x, server: _, request: "GET / HTTP/1.1", upstream: "http://127.0.0.1:8080/", host: "mydomain.com"
why does this not work?
I can access the 127.0.0.1:8080 via curl but nginx just displays a 502 error
Fixed this by disabling SELinux which should not have been enabled in the first place.
Related
So I am trying to set up a Jenkins deploy pipeline. Almost everything seems to be working fine, except for the last part of the job, which is to run wrangler publish (to publish the site to Cloudflare Workers).
I have tried running it twice now, and both times, it will fail during the job, and I will receive an error code "502" when I try to access my jenkins server. The only thing that works is a full reboot of the server.
I have tried checking logs, but nothing much shows up. In jenkins.error.log I see this:
2020/09/23 21:12:00 [error] 1098#1098: *498 connect() failed (111: Connection refused) while connecting to upstream, client: 162.158.94.165, server: jenkins.mydomain.com, request: "POST /job/my-project-staging/15/logText/progressiveHtml HTTP/1.1", upstream: "http://127.0.0.1:8080/job/my-project-staging/15/logText/progressiveHtml", host: "jenkins.mydomain.com", referrer: "https://jenkins.mydomain.com/job/my-project-staging/15/console"
2020/09/23 21:12:02 [error] 1098#1098: *500 connect() failed (111: Connection refused) while connecting to upstream, client: 162.158.93.72, server: jenkins.mydomain.com, request: "HEAD /job/my-project-staging/15/statusIcon HTTP/1.1", upstream: "http://127.0.0.1:8080/job/my-project-staging/15/statusIcon", host: "jenkins.mydomain.com"
2020/09/23 21:12:03 [error] 1098#1098: *502 connect() failed (111: Connection refused) while connecting to upstream, client: 172.69.34.207, server: jenkins.mydomain.com, request: "GET /job/my-project-staging/15/statusIcon HTTP/1.1", upstream: "http://127.0.0.1:8080/job/my-project-staging/15/statusIcon", host: "jenkins.mydomain.com"
2020/09/23 21:12:03 [error] 1098#1098: *504 connect() failed (111: Connection refused) while connecting to upstream, client: 162.158.91.152, server: jenkins.mydomain.com, request: "HEAD /job/my-project-staging/15/console HTTP/1.1", upstream: "http://127.0.0.1:8080/job/my-project-staging/15/console", host: "jenkins.mydomain.com"
2020/09/23 21:12:06 [error] 1098#1098: *506 connect() failed (111: Connection refused) while connecting to upstream, client: 162.158.91.146, server: jenkins.mydomain.com, request: "GET /job/my-project-staging/15/console HTTP/1.1", upstream: "http://127.0.0.1:8080/job/my-project-staging/15/console", host: "jenkins.mydomain.com"
2020/09/23 22:15:09 [error] 1098#1098: *1773 connect() failed (111: Connection refused) while connecting to upstream, client: 74.120.14.35, server: jenkins.mydomain.com, request: "GET / HTTP/1.1", upstream: "http://127.0.0.1:8080/", host: "123.123.123.123:443"
2020/09/23 22:15:10 [error] 1098#1098: *1775 connect() failed (111: Connection refused) while connecting to upstream, client: 74.120.14.35, server: jenkins.mydomain.com, request: "GET / HTTP/1.1", upstream: "http://127.0.0.1:8080/", host: "123.123.123.123"
2020/09/23 23:08:18 [error] 1098#1098: *2378 connect() failed (111: Connection refused) while connecting to upstream, client: 193.118.53.210, server: jenkins.mydomain.com, request: "GET /solr/ HTTP/1.1", upstream: "http://127.0.0.1:8080/solr/", host: "123.123.123.123"
2020/09/24 01:36:08 [error] 1098#1098: *7943 connect() failed (111: Connection refused) while connecting to upstream, client: 51.158.24.203, server: jenkins.mydomain.com, request: "GET / HTTP/1.1", upstream: "http://127.0.0.1:8080/", host: "123.123.123.123"
Any ideas?
I have tried restarting nginx, that doesn't prevent the 502 error. However, when I run sudo /etc/init.d/jenkins restart the jenkins server will reboot and be online again.
When I go into the failed job, I see this at the very end, before the server crashed:
memory allocation of 240904 bytes failedCreating placeholder flownodes because failed loading originals.
java.io.IOException: Tried to load head FlowNodes for execution Owner[jwr-nuxt-staging/15:jwr-nuxt-staging #15] but FlowNode was not found in storage for head id:FlowNodeId 1:26
at org.jenkinsci.plugins.workflow.cps.CpsFlowExecution.initializeStorage(CpsFlowExecution.java:689)
at org.jenkinsci.plugins.workflow.cps.CpsFlowExecution.onLoad(CpsFlowExecution.java:726)
at org.jenkinsci.plugins.workflow.job.WorkflowRun.getExecution(WorkflowRun.java:691)
at org.jenkinsci.plugins.workflow.job.WorkflowRun.onLoad(WorkflowRun.java:550)
at hudson.model.RunMap.retrieve(RunMap.java:225)
at hudson.model.RunMap.retrieve(RunMap.java:57)
at jenkins.model.lazy.AbstractLazyLoadRunMap.load(AbstractLazyLoadRunMap.java:501)
at jenkins.model.lazy.AbstractLazyLoadRunMap.load(AbstractLazyLoadRunMap.java:483)
at jenkins.model.lazy.AbstractLazyLoadRunMap.getByNumber(AbstractLazyLoadRunMap.java:381)
at hudson.model.RunMap.getById(RunMap.java:205)
at org.jenkinsci.plugins.workflow.job.WorkflowRun$Owner.run(WorkflowRun.java:940)
at org.jenkinsci.plugins.workflow.job.WorkflowRun$Owner.get(WorkflowRun.java:951)
at org.jenkinsci.plugins.workflow.flow.FlowExecutionList$1.computeNext(FlowExecutionList.java:65)
at org.jenkinsci.plugins.workflow.flow.FlowExecutionList$1.computeNext(FlowExecutionList.java:57)
at com.google.common.collect.AbstractIterator.tryToComputeNext(AbstractIterator.java:143)
at com.google.common.collect.AbstractIterator.hasNext(AbstractIterator.java:138)
at org.jenkinsci.plugins.workflow.flow.FlowExecutionList$ItemListenerImpl.onLoaded(FlowExecutionList.java:178)
at jenkins.model.Jenkins.<init>(Jenkins.java:1017)
at hudson.model.Hudson.<init>(Hudson.java:85)
at hudson.model.Hudson.<init>(Hudson.java:81)
at hudson.WebAppMain$3.run(WebAppMain.java:282)
Finished: FAILURE
Thinking this could be a memory related issue I went into /etc/default/jenkins and updated JAVA_ARGS to JAVA_ARGS="-Xmx4g -XX:MaxPermSize=512m -Djava.awt.headless=true" - but that didn't change anything. I have verified I can run wrangler publish via terminal on the server, without issues.
So aparently this was indeed a memory issue. My machine had 8Gb but turns out Jenkins use quite a lot, especially together with wrangler publish. So I added some 4GB swap memory and that seemed to resolve the issue.
You may follow this article on how to add swap memory on ubuntu: https://www.digitalocean.com/community/tutorials/how-to-add-swap-space-on-ubuntu-18-04
I run tomcat and my nginx.conf like this
If in http://127.0.0.1:8080/edu/b.html or http://192.168.0.102:8080/edu/b.html it's ok
If in http://192.168.0.102:9001/edu/b.html it can't work
my computer ip now is 192.168.0.102
error message
[error] 17810#17810: *12 connect() failed (111: Connection refused) while connecting to upstream, client: 192 .168.0.102, server: 192.168.0.102, request: "GET /edu/b.html HTTP/1.1", upstream: "http://127.0.0.1:8000/edu/b.html", host: "192. 168.0.102:9001"
Where is error? What should I do?
It is trying to connect to http://127.0.0.1:8000/edu/b.html(upstream) instead of http://192.168.0.102:8080/edu/b.html. You need to change the upstream port in your nginx.conf
I'm facing a problem with one server mine. I have a configuration of a Jenkins application running under Nginx in a Ubuntu OS.
But after updating Jenkins to a new version, when I try to reach my Jenkins web application, I get this error:
"502 Bad Gateway - nginx/1.14.0 (Ubuntu)"
Apparently all my configuration are okay.
How can I solve it?
Nginx error log:
2019/04/24 16:20:02 [error] 11424#11424: *2 connect() failed (111: Connection refused) while connecting to upstream, client: yyy.yy.yyy.yy, server: xx.xx.xxx.xxx, request: "GET /favicon.ico HTTP/1.1", upstream: "http://127.0.0.1:8080/favicon.ico", host: "xx.xx.xxx.xxx", referrer: "http://xx.xx.xxx.xxx/"
I currently have this problem with my wordpress website where it will work for about a day after a server restart, but then hit this set of errors:
2015/12/15 22:06:42 [crit] 12650#0: *28 connect() to unix:/var/run/php5-fpm.sock failed (2: No such file or directory) while connecting to upstream, client: 46.166.139.20, server: example.com, request: "POST /xmlrpc.php HTTP/1.0", $
2015/12/15 22:08:19 [error] 3216#0: *18 FastCGI sent in stderr: "PHP message: PHP Warning: trim() expects parameter 1 to be string, array given in /var/www/html/wp-includes/option.php on line 30
PHP message: PHP Warning: trim() expects parameter 1 to be string, array given in /var/www/html/wp-includes/option.php on line 30" while reading response header from upstream, client: 104.33.64.70, server: example.com, request: "P$
2015/12/15 22:40:08 [error] 3216#0: *197 upstream timed out (110: Connection timed out) while reading response header from upstream, client: 180.76.15.142, server: example.com, request: "GET / HTTP/1.1", upstream: "fastcgi://unix:/$
2015/12/15 22:40:20 [error] 3216#0: *199 upstream timed out (110: Connection timed out) while reading response header from upstream, client: 180.76.15.19, server: example.com, request: "GET / HTTP/1.1", upstream: "fastcgi://unix:/v$
2015/12/15 23:08:27 [error] 3216#0: *201 upstream timed out (110: Connection timed out) while reading response header from upstream, client: 180.76.15.143, server: example.com, request: "GET / HTTP/1.1", upstream: "fastcgi://unix:/$
2015/12/15 23:08:39 [error] 3216#0: *203 upstream timed out (110: Connection timed out) while reading response header from upstream, client: 180.76.15.12, server: example.com, request: "GET / HTTP/1.1", upstream: "fastcgi://unix:/v$
2015/12/15 23:20:20 [error] 3216#0: *205 upstream timed out (110: Connection timed out) while reading response header from upstream, client: 104.33.64.70, server: example.com, request: "GET /wp-admin/upgrade.php?step=1&backto=%2Fwp$
2015/12/15 23:22:20 [error] 3216#0: *205 upstream timed out (110: Connection timed out) while reading response header from upstream, client: 104.33.64.70, server: example.com, request: "GET /favicon.ico HTTP/1.1", upstream: "fastcg$
2015/12/15 23:57:09 [error] 3216#0: *367 connect() to unix:/var/run/php5-fpm.sock failed (11: Resource temporarily unavailable) while connecting to upstream, client: 46.166.139.20, server: example.com, request: "POST /xmlrpc.php HT$
2015/12/15 23:57:39 [error] 3216#0: *369 connect() to unix:/var/run/php5-fpm.sock failed (11: Resource temporarily unavailable) while connecting to upstream, client: 46.166.139.20, server: example.com, request: "POST /xmlrpc.php HT$
2015/12/15 23:57:41 [error] 3216#0: *371 connect() to unix:/var/run/php5-fpm.sock failed (11: Resource temporarily unavailable) while connecting to upstream, client: 46.166.139.20, server: example.com, request: "POST /xmlrpc.php HT$
2015/12/15 23:57:56 [error] 3216#0: *373 connect() to unix:/var/run/php5-fpm.sock failed (11: Resource temporarily unavailable) while connecting to upstream, client: 46.166.139.20, server: example.com, request: "POST /xmlrpc.php HT$
Afterwards, the error log just repeats that (11: Resource temporarily unavailable) code over and over. At this point trying to access the website itself just gives an nginx "an error has occurred" page, telling me to check error logs.
I don't know what exactly is causing the initial holdup, and it looks like after a few time outs the server just locks up entirely. Any advice? Thanks!
Someone from 46.166.139.20 tries to guess your password. If you don't use WP's XML-RPC you should disable it.
Hi I am getting the following error and have been searching and searching for an answer for my situation. I realize googling this issue has many solutions but ive tried them all and cant figure out why mine isnt working below is my nginx.conf and a log of the error please let me know if more information in needed
Log
2014/08/18 20:03:36 [error] 27960#0: *1 connect() failed (111: Connection refused) while connecting to upstream, client: x.x.x.x, server: , request: "GET / HTTP/1.1", upstream: "uwsgi://192.168.0.13:8081", host: "mysite.com"
2014/08/18 20:05:01 [error] 27960#0: *4 connect() failed (111: Connection refused) while connecting to upstream, client: 127.0.0.1, server: , request: "GET / HTTP/1.1", upstream: "uwsgi://192.168.0.13:8081", host: "mysite.com"
2014/08/18 20:08:19 [error] 28371#0: *1 connect() failed (111: Connection refused) while connecting to upstream, client: x.x.x.x, server: , request: "GET / HTTP/1.1", upstream: "uwsgi://127.0.0.1:8001", host: "mysite.com"
2014/08/18 20:08:21 [error] 28371#0: *1 connect() failed (111: Connection refused) while connecting to upstream, client: x.x.x.x, server: , request: "GET / HTTP/1.1", upstream: "uwsgi://127.0.0.1:8001", host: "mysite.com"
.conf
upstream django {
server 127.0.0.1:8001;
}
server {
location / {
include /etc/nginx/uwsgi_params;
uwsgi_pass django;
}
}
So it seems that whatever port I set in my uwsgi.ini file "socket = :" has to match the port I put as the server port in
upstream django {
server 127.0.0.1:8001;
}
Dont know if this is a true solution or whats actually going on behidn the scenes but it seemed to fix the issue