Actually my requirement is,am having 3 tables so i need to create type for each table or consolidate type to all table. but in java developer have to send the multiple parameter to my Procedure, so how to get the multiple values in single type and insert it into table??
Object type
CREATE OR REPLACE TYPE "POL_QUAT_TYPE"
IS OBJECT (V_POLICY_NO VARCHAR2 (30),
V_FOREIGN_POLICY VARCHAR2 (1));
tabletype
CREATE OR REPLACE TYPE POL_QUAT_table IS TABLE OF POL_QUAT_TYPE
Sample procedure
CREATE OR REPLACE PROCEDURE TEST1 (A POL_QUAT_TYPE) IS
B VARCHAR2(100);
C VARCHAR2(100);
BEGIN
B:=A(1);
C:=A(1);
INSERT INTO TEST ( PART, B )
VALUES (B,C);
COMMIT;
END;
Call this procedure
begin
test1('a','b');
end;
I want to know how get the value (a,b) though procedure from collection type.
Ok, you can insert the contents of an array of objects into the table like so:
CREATE OR REPLACE TYPE "POL_QUAT_TYPE"
IS OBJECT (V_POLICY_NO VARCHAR2 (30),
V_FOREIGN_POLICY VARCHAR2 (1));
/
CREATE OR REPLACE TYPE POL_QUAT_table IS TABLE OF POL_QUAT_TYPE;
/
CREATE OR REPLACE PROCEDURE TEST1 (p_a in POL_QUAT_table)
as
BEGIN
INSERT INTO TEST (PART, B)
select t.v_policy_no,
t.v_foreign_policy
from table(p_a) t;
COMMIT;
END;
/
I've created a test case to demonstrate that it works over on Oracle LiveSQL.
This means you can insert all the content of the array in one go without having to loop through the array and insert one record at a time, so it should be much more performant.
Related
I want to use 1st parameter of my procedure EMP_ID as IN OUT parameter. Originally it's IN parameter and this procedure is working fine, but as the last line concern
htp.p('Inserted for Employee-id '||EMP_ID);
I want to use this line in anonymous block and most importantly it should be a bind variable because I am creating the REST API in which user will only enter values and it will be taken as bind variable in oracle Apex and the below procedure is working fine with respect of IN parameter.
create or replace procedure att_time_ins (EMP_ID in varchar2, ORG_ID in number,V_TIME_STATUS in number) is
BEGIN
INSERT INTO TIME_ATTENDANCE_POOL
(EMPLOYEE_ID, ATTENDANCE_DATE,TIME_HOURS,TIME_MINUTES,TIME_STATUS,LOCATION_ID,ORG_ID,PREPARED_ON )
VALUES
(EMP_ID, to_date(sysdate,'DD/MM/YYYY'),to_char(sysdate,'HH24') ,to_char(sysdate,'MI'),V_TIME_STATUS,null,ORG_ID,
to_date(sysdate,'DD/MM/YYYY') );
COMMIT;
time_management.create_attendance_sheet(v_org_id => ORG_ID,
v_employee_id => EMP_ID,
target_date => to_date(sysdate,'DD/MM/YYYY'));
htp.p('Inserted for Employee-id '||EMP_ID);
end att_time_ins;
I am calling my procedure in this way
begin
att_time_ins(:employee_id,:org_id,:time_status);
end;
Please help me to modify this stuff according to IN OUT Parameter i.e Employee_id should be IN OUT parameter. There is no proper documentation regarding passing bind variables as in out prameter in PLSQL Block.
Let us say you have a procedure named PR_PROC, you can use VARIABLE statement for passing IN OUT or OUT kind of variables.
CREATE OR REPLACE PROCEDURE PR_PROC (EMP_NAME IN VARCHAR2,
EMP_ID IN OUT VARCHAR2)
IS
BEGIN
DBMS_OUTPUT.PUT_LINE (EMP_NAME||EMP_ID);
END;
VARIABLE KURSOR VARCHAR2
BEGIN
:KURSOR:='4';
PR_PROC('SENIOR',:KURSOR);
END;
Note: If you are using TOAD Editor you can press F5 to make it work.
Oracle VARIABLE
I have a scenario to implement where in we will have an SP with two parameters
1) In parameter of array of Varchar2
2) Cursor -- Out parameter
We have populate the cursor only for each Value passed in array and this opened/populated cursor will be used by Java. But what i have found till now is, if we have to process an array then it should have to be done using loop.
For ex:
Open Cursor_Name
For
For index In Arrar_Parameter.FIRST .. Arrar_Parameter.LAST
LOOP
SELECT * FROM EMP WHERE EmpId = Arrar_Parameter[i] -------> This needs to be looped and not sure if this will work
END LOOP
Can we have some thing like this
Open Cursor_Name
For
SELECT * FROM EMP WHERE EmpId IN (Arrar_Parameter values) ------> To fetch/put all the array values at once without loop.
Kindly suggest hot to populate cursor in this scenario
Assuming your array parameter is a schema-level varray or nested table, you can use a table collection expression:
The table_collection_expression lets you inform Oracle that the value of collection_expression should be treated as a table for purposes of query and DML operations. The collection_expression can be a subquery, a column, a function, or a collection constructor. Regardless of its form, it must return a collection value—that is, a value whose type is nested table or varray. This process of extracting the elements of a collection is called collection unnesting.
This uses a built-in varray type but you can substitute your own:
create procedure procedure_name (
array_parameter sys.odcivarchar2list, cursor_name out sys_refcursor
) as
begin
open cursor_name for
select e.*
from table (array_parameter) a
join emp e on e.empid = a.column_value;
end;
/
You can also use in if you prefer:
create procedure procedure_name (
array_parameter sys.odcivarchar2list, cursor_name out sys_refcursor
) as
begin
open cursor_name for
select *
from emp
where empid in (select column_value from table (array_parameter));
end;
/
If it is a nested table you can also use the member of syntax:
create type my_varchar2_table as table of varchar2(30);
/
create procedure procedure_name (
array_parameter my_varchar2_table, cursor_name out sys_refcursor
) as
begin
open cursor_name for
select *
from emp
where empid member of array_parameter;
end;
/
I have a set of product that I want to tag to a certain value so what I did this:
declare
type array_produit_auto is varray(3) of varchar(50);
array array_produit_auto := array_produit_auto('code_product1', 'code_product2', 'code_product3');
begin
for i in 1..array.count loop
update F_PRODUITASS pas
set PAS_NONGES_IDA = 0
WHERE PAS.PAS_CODE_PRODUIT = array(i;
end loop;
end;
commit;
however, the list of these products is too long. Instead I'd like to do this:
declare
type array_produit_auto is varray(3) of varchar(50);
array array_produit_auto := array_produit_auto('code_product4', 'code_product5', 'code_product6');
begin
update F_PRODUITASS pas
set PAS_NONGES_IDA = 1
WHERE PAS.PAS_CODE_PRODUIT NOT IN array;
end;
commit;
except this doesn't work since apparently I can't mix a query and an array this way.
Any idea of how I could make this work?
If you used a nested table then you could query from the nested table, something like this:
DECLARE
v_exclude_list t_array_produit_auto :=
t_array_produit_auto('code_product4', 'code_product5', 'code_product6');
BEGIN
UPDATE F_PRODUITASS pas
SET PAS_NONGES_IDA = 1
WHERE PAS.PAS_CODE_PRODUIT NOT IN ( SELECT *
FROM TABLE(v_exclude_list) )
;
END;
/
Also, you meant varchar2, right?
Update regarding the Opaque error: The type declaration would need to be an object type (create with the CREATE OR REPLACE TYPE syntax rather than a local plsql type as in the DDL below.
CREATE TABLE F_PRODUITASS(PAS_NONGES_IDA number, PAS_CODE_PRODUIT VARCHAR2(50));
INSERT INTO F_PRODUITASS VALUES(3, 'code_product3');
INSERT INTO F_PRODUITASS VALUES(4, 'code_product4');
CREATE OR REPLACE TYPE t_array_produit_auto IS TABLE OF VARCHAR2(50);
If you did not wish to create your own object type, you could use pre-existing varchar2 or number types such as sys.odcivarchar2list as described here:
Anonymous TABLE or VARRAY type in Oracle
I have to use existing stored procedure which returns REF CURSOR. I need to insert that resultset into a temporary table.
Spec of procedure is:
TYPE cur IS REF CURSOR;
PROCEDURE get(p_one NUMBER ,p_two OUT cur);
How can I insert the resultset of this procedure into a table.
I just re-read the title of your question. Do you actually need to be able to select from a procedure?
If so, this can be achieved by using pipelined functions.
The process for this is:
Create an object type to represent the record-type you require.
Create a nested table type of the object.
Create a pipelined function which returns the nest table.
You can then select from this function.
This example should get you on your way:
create or replace type to_test as object (
val1 varchar2(32),
val2 varchar2(32)
);
create or replace type tt_test as table of to_test;
create or replace function demo_pipe return tt_test pipelined
is
v_test to_test;
begin
for rec in (select * from user_tables) loop
v_test := to_test(rec.table_name, rec.tablespace_name);
pipe row (v_test);
end loop;
end;
/
select * from table(demo_pipe);
I have a function, that calculates hash value of big string! First of all I wrote a cursor T1_CUT, which can include variable count of SELECT statements, something like:
SELECT T1.COL1||T1.COL2||...||T1.COLn FROM T1 WHERE id=documentid
SELECT T2.COL1||T2.COL2||...||T2.COLn FROM T2 WHERE id=documentid
...
SELECT Tn.COL1||Tn.COL2||...||Tn.COLn FROM Tn WHERE id=documentid
Each SELECT can contain one or more rows. So, I concat ALL values in rows in each SELECT and ALL SELECTs values in one big string V_RESULT with type VARCHAR2(32767). After that I get hash value (S_HASH_RESULT) of this big string using MD5. It works fine about 8 monthes, but few days ago I've got ORA-06502 (no surprise). It means, that my final big string have more than 32K symbols (we use 1byte character set - CL8MSWIN1251).
Friends, how can I rewrite my function for using BLOB data type to V_RESULT variable, not VARCHAR2(32767).
Below, text of my function:
FUNCTION CALC_HASH (P_PARTAB_ID IN NUMBER, P_DOC_ID IN NUMBER)
RETURN VARCHAR2
IS
S_HASH_RESULT VARCHAR2(1000);
V_RESULT VARCHAR2(32767);
CURSOR T1_CUT IS
...
/*BIG COMPLAIN SELECT*/
...
T1 T1_CUT%ROWTYPE;
TYPE VALUES_T IS TABLE OF VARCHAR2(32767);
L_VALUES VALUES_T;
BEGIN
OPEN T1_CUT;
FETCH T1_CUT INTO T1;
WHILE T1_CUT%FOUND
LOOP
EXECUTE IMMEDIATE
T1.TEXT
BULK COLLECT INTO L_VALUES;
FOR INDX IN 1 .. L_VALUES.COUNT
LOOP
V_RESULT := V_RESULT || '' ||TO_CHAR(L_VALUES (INDX));
END LOOP;
FETCH T1_CUT INTO T1;
END LOOP;
CLOSE T1_CUT;
S_HASH_RESULT := DBMS_OBFUSCATION_TOOLKIT.MD5(input_string=>V_RESULT);
RETURN S_HASH_RESULT;
END CALC_HASH;
Thanks in advance!
there is a function called utl_raw.cast_to_raw(vc) which transforms a varchar2 into a BLOB value.
However, I recommend to use CLOB to store string values. BLOB has no character semantics at all, i.e., NLS_LANG settings are ignored.
EDIT:
if you want to transform VARCHAR2 to CLOB, simply use TO_CLOB