so I am setting up my home network with multiple Raspberry Pis and I have run into an issue, which might be similar, but not exactly identical to some other queries here on stackoverflow. I am just starting so this might be a pretty newbie question.
Here is the setup: I have a router (a pretty shitty one as we rent the apartment from someone who had the network set up) and want to connect three Raspberry Pis with different functions:
RPi 1 is running a Apache2 Webserver and hosting my owncloud instance. As I do not have a static public IP I am using noip.com to dynamically update a domain to resolve to my current IP - address.
RPi 2 is running a VPN service which I want to be able to use while being on the road, e.g. in Internet Cafés and such.
RPi 3 has a RPi Noir Camera v2 and serves as a Baby Monitor which is accessible via its private IP address within the network.
So, here comes the question: is there a way to access each of these raspberries via their private IP addresses from outside my network?
I.e. I want to be able to access the owncloud, the VPN and the baby monitor via their respective private IP - addresses? Or do I need to find a way to run all these services on a single machine?
Thanks and sorry for asking basic questions.
This can be done via port forwarding on the router.
For example:
for external IP / port 1234 -> forward to internal IP (and possibly different port) of RPi 1
for external IP / port 1235 -> forward to internal IP of RPi 2
and so on..
I use port 1234 as an example for the webserver, because there could be problems when using port 80 on a home network. To access it you can use yourPublicIP:1234/index.html (or dynamic_domain:1234 )
Related
I have a raspberry pi connected to my router with a local IP. I want to access the raspberry pi from outside (from another country) the local network via web browser. So, I have purchased a VPS which has its public IP.
Now how can I assign this VPS IP to the raspberry pi or any other local devices?
how can I assign this VPS IP to the raspberry pi or any other local devices?
That's not how the internet works.
In short, the VPS provider has a pool of IPs and it or its ISP is responsible for publishing routes to the rest of the internet, informing the rest of the internet how to route to those IPs.
You can't just "move" the public IP to your local network; the rest of the internet won't route traffic to it. It would be kind of like writing "1600 Pennsylvania avenue" on the front of your house - you wouldn't cause you to get White House mail, right? Because regardless of what you write there, the post office doesn't use it as a source of truth for mail routing.
There's a few of the options you have:
use ngrok to expose an endpoint to your local service. Ngrok's servers can proxy connections back to your local environment without it having to be online. This will be accessible by anyone on the internet, but is more obscure than an ipv4 address which can and will be easily found (see below). This is a quick and easy solution, and what I'd recommend in your case.
you already have the VPS. Run the code there instead of on the raspberry pi. It will almost certainly be more reliable and higher speed than your home internet.
you also already have a public IP, assuming your pi's local router has a route to the internet. the router is performing NAT so that devices "behind" it with only internal addresses can still communicate with the world. You can almost certainly configure your router to forward a certain port to your pi's internal IP address.
set up a VPN between the private networks, or between the individual hosts on the private networks. This is a lot of work and will require more knowledge of IP networking. If this interested you, I'd recommend looking at Wireguard (recommended) or OpenVPN.
Finally, keep in mind that unless you do something to make it not the case, your service, once on a public IP, will be accessible from the wide world. Since IPv4 space is pretty small by 2022 standards, and there are only 65000 some IP ports per address, it won't take nefarious parts of the internet long to find your service. You can't hide in the obscurity of an IPv4 network.
If your public address is ipv6 instead, those are essentially unguessable and much more likely to go unnoticed. Same thing is true of ngrok - since it has very large set of potential URLs, it's hard to guess. Still, I'd set up some sort of authentication in front of the service. It's just good practice, like locking your house.
Run this on vps:
echo "GatewayPorts yes" >> /etc/ssh/sshd_config
And this on your raspberry pi:
ssh -L remote-port:localhost:your-local-port your-vps.com
You will access server using: your-vps.com:remote-port
i Have created a local web app hosted on my raspberry pi. I want to access the web app from outside so outside the local network.
To do that, I have configured dmz and I have added my raspberry local ip address.
Now how can I get the raspberry public ip address?
I have tried to use the bash commands: curl checkip.amazonaws.com. But the ip address i get is the same as my computer
How can I solve it? how can i access the raspberry from outside?
P.S: I control my raspberry via ssh
thank you :)
Your public address is the same for every device on your network because it's the IP address devices OUTSIDE of your local network see as illustrated by this quick diagram I've made.
If you want to access your local webserver you need to tell your router to forward requests to a given port to a local network address. So assuming your webserver is running on port 80 you need to tell your router to forward requests to 192.168.1.50 (assuming your RPi local address matches the diagram's) 🙃
I am using (airtel xstream fiber) connection and trying to do port forwarding. I forwarded port 3000 of wan and direct it to my system ip address 192.168.1.2 on port 3001.
Node server is running on my system on port 3001. And I can access my hello world website locally using 192.168.1.2:3001. But when I am trying to access using public ip, it show this error code "ERR_CONNECTION_TIMED_OUT".
Also, I found my router port 3001 is open using online port checking tool/website.
So, Can anyone please tell what could be reason behind this ? Is this the problem with windows.
You first need to check what ports are open by your ISP. If your ISP is giving you a local ip at the router. Basically, creating a ppp connection. It may be using a cg nat. In that case you need to buy a static ip, without that none of the traffic will be Directed to your router. Let me know if you find something, I'm currently looking to get xstream airtel as well.
No there is no need for static IP to be access server remotely. As of now, What I see is airtel allocates new ip every 24 hr or when router got disconnected. To access your server remotely you can do two things. First one is more secured.
Change Primary IP adress of your airtel router and use Portforwarding so that its port 80 will be free for you.
Enable DMZ and point it to your local server IP. [192.168.X.X]. In this case all of your ports of the device are exposed to internet. If you want to be secure. Make sure add another router between server and airtel router and enable port forwarding.
But in this case there is a catch, When you try to access your local website using public ip (which you can see on google search) it will redirect you to airtel router panel. But when you try to access it using other device (not server otherwise server will get disconnected) connected to internet using other network(other that your current airtel router like JIO sim, Airtel Sim, etc), It will work excellently.
To get rid of dynamic ip use no-ip services. Its website will help you more. Basically, It is dynamic dns server where you will get free domain. That will get update regularly while its service running on your system. To use other dns provider service like godaddy you must need an static ip.
I have a TCP Server for a my personal chat, I want to expand my connection beyond my local network and I want to open my port: 28752 to my IP public of pc to enter wherever I want only when my computer is on.
I have seen different solutions for example DMZ to associate my local IP to public IP, but i want to do this without modifying to router's setting I wanted to do it from a program. Is it possible?
It is possible to open up ports. But it depends on the OS in which you are trying to accomplish it. You can use the linux iptables to manipulate the ports opened and closed to any linux machine. IptablesSome examples . The ports should also be opened on the firewall layer outside the VM. eg: It could be AWS access policy, Security group, MAC's security firewall. Your laptop, when connected to the internet, will have a public IP address, you can share that public IP. But these IP address will change when you get connected to a different router. You can use AWS cli commands to assign a static IP address for your machine and expose it publicly. At the least minimum, you would need a public DNS server to expose your IP publicly. Easy way to achieve this is by putting in web server on cloud. Without a domain , you cant expose your IP. Once you have finalized on the domain (eg: AWS Route 53, Ingree IP from K8 etc), you can change/manipulate them from your program. It need not be language specific.
I and unable to RDP Azure VM on my corporate network using "DNS:Port" (like vmname.cloudapp.net:3389). It works fine on my home network, which means, endpoints are set correctly.
However, it was possible to RDP VM using Public IP but not anymore. With public IP, I was able to RDP VM on my corporate network, but not sure this has restricted recently?
Any way of to access a VM using Public IP rather DNS:Port format?
Thanks
It is common for enterprise IT to block outbound ports because some argue this provides better security. I don't think this necessarily makes sense, but here's what you can do to verify. As a best practice, always connect to Windows Azure VMs using DNS names rather than IP addresses because the addresses are subject to change, while DNS names will not.
1 Confirm the port you're trying to connect to. By default, Windows Azure assigns a port in the dynamic range (49152–65535) for Remote Desktop, which is mapped internally to the usual RDP port 3389. You can see which one this is by checking your VM endpoint public port in the Windows Azure portal (Select Virtual Machines > Your VM > Endpoints tab > RemoteDesktop entry). You need to connect using this port after the name (using the Connect button in the portal gives you an RDP shortcut file that does this for you). If my public port is 62472, I put this in the Remote Desktop Connection computer field:
percepten-VM1.cloudapp.net:62472
If you like, you can edit the public port here in the portal using the "Edit the endpoint" option on the RemoteDesktop entry. That way you can make it 3389 if your IT department asks you for a single port number to allow outbound.
2 Test your DNS resolution to your VM using nslookup or ping. If you get "non-existent domain", then your corporate DNS is blocking Windows Azure resolution. This is what you want to see:
>nslookup percepten-vm1.cloudapp.net
Non-authoritative answer:
Name: percepten-vm1.cloudapp.net
Address: 157.56.182.135
3 If you can resolve DNS, then try using an outbound port scan tool to verify port 3389 is allowed out. I found a nice one at portquiz.positon.org. To use, open the site with a port appended in the URL. In this case, open "http://portquiz.positon.org:3389". You should see this on the page:
Outgoing port tester
This server listens on all TCP ports, allowing you to test any
outbound TCP port. You have reached this page on port 3389.
...
4 If you receive "page not available", then the port is blocked. Try contacting IT to ask them to open port 3389 (or the entire dynamic range if you're feeling ambitious). If they want to open it only to specific places on the Internet, provide them this list of all Windows Azure IP address ranges:
Windows Azure Datacenter IP Address Ranges
Hope that helps!
Noah Stahl
Percepten