I am using Xiomi android TV box for developing android TV application. For debugging when we connect through ADB using its IP address it gives following error
unable to connect to 10.1.1.84:5555: cannot connect to 10.1.1.84:5555: No connection could be made because the target machine actively refused it. (10061)
Where as it is debugging through USB cable very well.
How can we connect through ADB with its IP address using command prompt?
by default wireless or network debug on in MIBOX
try connect using adb connect 192.12.1.15
Related
Hy!
I am using node-red mobile via a termux, I am trying to connect a RFD 868 module to mobile and receive serial data through it via a USB A port. I have connected a USB type C docking station with mobile which have three USB A port.
When I connect the docking station it shows three ports and I have granted access to the ports too via termux api. But when I try to use the port on Nod-red I receive the following message
[error] [serialconfig:29f6efabb67db2b8]
serial port /dev/bus/usb/001/003 error: Error: Error: Permission denied, cannot open /dev/bus/usb/001/003
Through same setup on the same port via "free USB serial" app I can receive serial data successfully. But on node-red mobile app its not working. Node red don't ask to select USB port it automatically denied the permission.
I have a genymotion android emulator running on a device.
Now i want to connect to that emulator using ADB.
I tried to connect to that emulator runnong on another device with adb connct :5555.
It didnt worked!
both system are on same network
I have a virtual machine that i run with rdp in my local pc. I'm developing a xamarin forms app in visual studio in that virtual machine. So I would debug the app in my psysical device. I tried with adb but it don't work cause I can't connect my device via usb to virtual machine. Any ideas??
Google just updated this from Android 11 onwards, so for any one using a newer device, you can follow these steps to setup your device to build and debug wirelessly using your wifi connection:
On your Android 11 device, go to your Settings -> Tap on Advanced and go to the Developer options.
Then tap on Wireless Debugging switch, and always allow wireless debugging for your personal wireless network in the popup dialog
Then tap on the Wireless Debugging option and select “Pair device with pairing code” and it will give you a 6 digit code and IP address as you can see in the image
There are many ways of doing pairing the phone to your computer. For the simplest one, inside Visual Studio, go to Tools -> SDK Command Prompt and type the IP address and port from your phone above into the terminaladb pair {ipaddress}:{port}.
Then take the IP Address and port from the last screen and enter the following command adb connect {ipaddress}:{port}.
There’s a lot more details in this article Including limitations and a comparison with the iphone wireless debug feature
The ADB port forwarder can be used to connect your local adb client with a remote adb server.
This can help you solve your problem: https://bitbucket.org/chabernac/adbportforward/wiki/Home
I am trying to connect my Android devices present on a different network than my Appium Server but having no success.
P.S. The adb connects with the device over the same network and over USB but not to devices on a different network.
First of all, you need to get the IP address of the remote machine, your device is connected to. Assuming adb default port is 5555 and it is exposed to another machine with Appium server:
On machine with Appium server you run adb connect <ip_address>:5555, then adb devices should list remote device.
To have a robust solution you can have a look at OSS libraries like OpenSTF
I have some device in MIPS architecture, on this device unfortunately wasn't instal any server ssh, but telnet daemon is present. I try connect to this device in goal remote debbuging but I do not can connect. Also If I try test connect.
So it is possible to remote debugging in Qt trought Telnet ? Whether this function is only reserved for SSH server ?