This question is motivated by a previous post illustrating various ways to change how axes scales are plotted in a ggplot figure, from the default exponential notation to the full integer value (when ones axes values are very large). While I am able to convert the axes scales from exponential notation to full values, I am unclear how one would achieve the same goal for the values appearing in the legend.
While I understand that one can manually change the length of the legend scale with "scale_color..." or "scale_fill..." followed by the "limits" argument, this does not appear to be a solution to getting my legend values to show "6000000000" rather than "6e+09" (or "0" rather than "0e+00" for that matter).
The following example should suffice. My hope is someone can point out how to implement the 'scales' package to apply for legend scales rather than axes scales.
Thanks very much.
library(ggplot2)
library(scales)
Data <- data.frame(
pi = c(2,71,828,1828,45904,523536,2874713,52662497,757247093,6999595749),
e = c(3,14,159,2653,58979,311599,7963468,54418516,1590576171, 99),
face = 1:10)
p <- ggplot(data = Data, aes(x=face, y=e, colour = pi))
myplot <- p + geom_point() +
scale_y_continuous(labels = comma) +
scale_color_gradientn(colours = rainbow(2), limits=c(0,7000000000))
myplot
Use the Comma formatter in scale_color_gradientn by setting labels = comma e.g.:
p <- ggplot(data = Data, aes(x=face, y=e, colour = pi))
myplot <- p + geom_point() +
scale_y_continuous(labels = comma) +
scale_color_gradientn(colours = rainbow(2), limits=c(0,7000000000), labels = comma)
myplot
Related
I have a two small sets of points, viz. (1,a1),...,(9,a9) and (1,b1),...,(9,b9). I'm trying to interpolate these two set of points separately by using splines with the help of ggplot2. So, what I want is 2 different splines curves interpolating the two sets of points on the same plot (Refer to the end of this post).
Since I have a very little plotting experience using ggplot2, I copied a code snippet from this answer by Richard Telford. At first, I stored my Y-values for set of points in two numeric variables A and B, and wrote the following code :
library(ggplot2)
library(plyr)
A <- c(a1,...,a9)
B <- c(b1,...,b9)
d <- data.frame(x=1:9,y=A)
d2 <- data.frame(x=1:9,y=B)
dd <- rbind(cbind(d, case = "d"), cbind(d2, case = "d2"))
ddsmooth <- plyr::ddply(dd, .(case), function(k) as.data.frame(spline(k)))
ggplot(dd,aes(x, y, group = case)) + geom_point() + geom_line(aes(x, y, group = case), data = ddsmooth)
This produces the following output :
Now, I'm seeking for an almost identical plot with the following customizations :
The two spline curves should have different colours
The line width should be user's choice (Like we do in plot function)
A legend (Specifying the colour and the corresponding attribute)
Markings on the X-axis should be 1,2,3,...,9
Hoping for a detailed solution to my problem, though any kind of help is appreciated. Thanks in advance for your time and help.
You have already shaped your data correctly for the plot. It's just a case of associating the case variable with colour and size scales.
Note the following:
I have inferred the values of A and B from your plot
Since the lines are opaque, we plot them first so that the points are still visible
I have included size and colour parameters to the aes call in geom_line
I have selected the colours by passing them as a character vector to scale_colour_manual
I have also selected the sizes of the lines by calling scale_size_manual
I have set the x axis breaks by adding a call to scale_x_continuous
The legend has been added automatically according to the scales used.
ggplot(dd, aes(x, y)) +
geom_line(aes(colour = case, size = case, linetype = case), data = ddsmooth) +
geom_point(colour = "black") +
scale_colour_manual(values = c("red4", "forestgreen"), name = "Legend") +
scale_size_manual(values = c(0.8, 1.5), name = "Legend") +
scale_linetype_manual(values = 1:2, name = "Legend") +
scale_x_continuous(breaks = 1:9)
Created on 2020-07-15 by the reprex package (v0.3.0)
I have a set of code that produces multiple plots using facet_wrap:
ggplot(summ,aes(x=depth,y=expr,colour=bank,group=bank)) +
geom_errorbar(aes(ymin=expr-se,ymax=expr+se),lwd=0.4,width=0.3,position=pd) +
geom_line(aes(group=bank,linetype=bank),position=pd) +
geom_point(aes(group=bank,pch=bank),position=pd,size=2.5) +
scale_colour_manual(values=c("coral","cyan3", "blue")) +
facet_wrap(~gene,scales="free_y") +
theme_bw()
With the reference datasets, this code produces figures like this:
I am trying to accomplish two goals here:
Keep the auto scaling of the y axis, but make sure only 1 decimal place is displayed across all the plots. I have tried creating a new column of the rounded expr values, but it causes the error bars to not line up properly.
I would like to wrap the titles. I have tried changing the font size as in Change plot title sizes in a facet_wrap multiplot, but some of the gene names are too long and will end up being too small to read if I cram them on a single line. Is there a way to wrap the text, using code within the facet_wrap statement?
Probably cannot serve as definite answer, but here are some pointers regarding your questions:
Formatting the y-axis scale labels.
First, let's try the direct solution using format function. Here we format all y-axis scale labels to have 1 decimal value, after rounding it with round.
formatter <- function(...){
function(x) format(round(x, 1), ...)
}
mtcars2 <- mtcars
sp <- ggplot(mtcars2, aes(x = mpg, y = qsec)) + geom_point() + facet_wrap(~cyl, scales = "free_y")
sp <- sp + scale_y_continuous(labels = formatter(nsmall = 1))
The issue is, sometimes this approach is not practical. Take the leftmost plot from your figure, for example. Using the same formatting, all y-axis scale labels would be rounded up to -0.3, which is not preferable.
The other solution is to modify the breaks for each plot into a set of rounded values. But again, taking the leftmost plot of your figure as an example, it'll end up with just one label point, -0.3
Yet another solution is to format the labels into scientific form. For simplicity, you can modify the formatter function as follow:
formatter <- function(...){
function(x) format(x, ..., scientific = T, digit = 2)
}
Now you can have a uniform format for all of plots' y-axis. My suggestion, though, is to set the label with 2 decimal places after rounding.
Wrap facet titles
This can be done using labeller argument in facet_wrap.
# Modify cyl into factors
mtcars2$cyl <- c("Four Cylinder", "Six Cylinder", "Eight Cylinder")[match(mtcars2$cyl, c(4,6,8))]
# Redraw the graph
sp <- ggplot(mtcars2, aes(x = mpg, y = qsec)) + geom_point() +
facet_wrap(~cyl, scales = "free_y", labeller = labeller(cyl = label_wrap_gen(width = 10)))
sp <- sp + scale_y_continuous(labels = formatter(nsmall = 2))
It must be noted that the wrap function detects space to separate labels into lines. So, in your case, you might need to modify your variables.
This only solved the first part of the question. You can create a function to format your axis and use scale_y_continous to adjust it.
df <- data.frame(x=rnorm(11), y1=seq(2, 3, 0.1) + 10, y2=rnorm(11))
library(ggplot2)
library(reshape2)
df <- melt(df, 'x')
# Before
ggplot(df, aes(x=x, y=value)) + geom_point() +
facet_wrap(~ variable, scale="free")
# label function
f <- function(x){
format(round(x, 1), nsmall=1)
}
# After
ggplot(df, aes(x=x, y=value)) + geom_point() +
facet_wrap(~ variable, scale="free") +
scale_y_continuous(labels=f)
scale_*_continuous(..., labels = function(x) sprintf("%0.0f", x)) worked in my case.
Is there any way to line up the points of a line plot with the bars of a bar graph using ggplot when they have the same x-axis? Here is the sample data I'm trying to do it with.
library(ggplot2)
library(gridExtra)
data=data.frame(x=rep(1:27, each=5), y = rep(1:5, times = 27))
yes <- ggplot(data, aes(x = x, y = y))
yes <- yes + geom_point() + geom_line()
other_data = data.frame(x = 1:27, y = 50:76 )
no <- ggplot(other_data, aes(x=x, y=y))
no <- no + geom_bar(stat = "identity")
grid.arrange(no, yes)
Here is the output:
The first point of the line plot is to the left of the first bar, and the last point of the line plot is to the right of the last bar.
Thank you for your time.
Extending #Stibu's post a little: To align the plots, use gtable (Or see answers to your earlier question)
library(ggplot2)
library(gtable)
data=data.frame(x=rep(1:27, each=5), y = rep(1:5, times = 27))
yes <- ggplot(data, aes(x = x, y = y))
yes <- yes + geom_point() + geom_line() +
scale_x_continuous(limits = c(0,28), expand = c(0,0))
other_data = data.frame(x = 1:27, y = 50:76 )
no <- ggplot(other_data, aes(x=x, y=y))
no <- no + geom_bar(stat = "identity") +
scale_x_continuous(limits = c(0,28), expand = c(0,0))
gYes = ggplotGrob(yes) # get the ggplot grobs
gNo = ggplotGrob(no)
plot(rbind(gNo, gYes, size = "first")) # Arrange and plot the grobs
Edit To change heights of plots:
g = rbind(gNo, gYes, size = "first") # Combine the plots
panels <- g$layout$t[grepl("panel", g$layout$name)] # Get the positions for plot panels
g$heights[panels] <- unit(c(0.7, 0.3), "null") # Replace heights with your relative heights
plot(g)
I can think of (at least) two ways to align the x-axes in the two plots:
The two axis do not align because in the bar plot, the geoms cover the x-axis from 0.5 to 27.5, while in the other plot, the data only ranges from 1 to 27. The reason is that the bars have a width and the points don't. You can force the axex to align by explicitly specifying an x-axis range. Using the definitions from your plot, this can be achieved by
yes <- yes + scale_x_continuous(limits=c(0,28))
no <- no + scale_x_continuous(limits=c(0,28))
grid.arrange(no, yes)
limits sets the range of the x-axis. Note, though, that the alginment is still not quite perfect. The y-axis labels take up a little more space in the upper plot, because the numbers have two digits. The plot looks as follows:
The other solution is a bit more complicated but it has the advantage that the x-axis is drawn only once and that ggplot makes sure that the alignment is perfect. It makes use of faceting and the trick described in this answer. First, the data must be combined into a single data frame by
all <- rbind(data.frame(other_data,type="other"),data.frame(data,type="data"))
and then the plot can be created as follows:
ggplot(all,aes(x=x,y=y)) + facet_grid(type~.,scales = "free_y") +
geom_bar(data=subset(all,type=="other"),stat="identity") +
geom_point(data=subset(all,type=="data")) +
geom_line(data=subset(all,type=="data"))
The trick is to let the facets be constructed by the variable type which was used before to label the two data sets. But then each geom only gets the subset of the data that should be drawn with that specific geom. In facet_grid, I also used scales = "free_y" because the two y-axes should be independent. This plot looks as follows:
You can change the labels of the facets by giving other names when you define the data frame all. If you want to remove them alltogether, then add the following to your plot:
+ theme(strip.background = element_blank(), strip.text = element_blank())
I am plotting a forest plot in ggplot2 and am having issues with the ordering of the labels in the legend matching the order of the labels in the data set. Here is my code below.
data code
d<-data.frame(x=c("Co-K(W) N=720", "IH-K(W) N=67", "IF-K(W) N=198", "CO-K(B)N=78", "IH-K(B) N=13", "CO=A(W) N=874","D-Sco Ad(W) N=346","DR-Ad (W) N=892","CE_A(W) N=274","CO-Ad(B) N=66","D-So Ad(B) N=215","DR-Ad(B) N=123","CE-Ad(B) N=79"),
y = rnorm(13, 0, 0.1))
d <- transform(d, ylo = y-1/13, yhi=y+1/13)
d$x <- factor(d$x, levels=rev(d$x)) # reverse ordering
forest plot code
credplot.gg <- function(d){
# d is a data frame with 4 columns
# d$x gives variable names
# d$y gives center point
# d$ylo gives lower limits
# d$yhi gives upper limits
require(ggplot2)
p <- ggplot(d, aes(x=x, y=y, ymin=ylo, ymax=yhi,group=x,colour=x,)) +
geom_pointrange(size=1) +
theme_bw() +
scale_color_discrete(name="Sample") +
coord_flip() +
theme(legend.key=element_rect(fill='cornsilk2')) +
guides(colour = guide_legend(override.aes = list(size=0.5))) +
geom_hline(aes(x=0), colour = 'red', lty=2) +
xlab('Cohort') + ylab('CI') + ggtitle('Forest Plot')
return(p)
}
credplot.gg(d)
This is what I get. As you can see the labels on the y axis matches the labels in the order that it is in the data. However, it is not the same order in the legend. I'm not sure how to correct this. This is my first time creating a plot in ggplot2. Any feedback is well appreciated.Thanks in advanced
Nice plot, especially for a first ggplot! I've not tested, but I think all you need is to add reverse=TRUE inside your colour's guide_legend(found this in the Cookbook for R).
If I were to make one more comment, I'd say that ordering your vertical factor by numeric value often makes comparisons easier when alphabetical order isn't particularly meaningful. (Though maybe your alpha order is meaningful.)
I have a plot created in ggplot2 that uses scale_fill_gradientn. I'd like to add text at the minimum and maximum of the scale legend. For example, at the legend minimum display "Minimum" and at the legend maximum display "Maximum". There are posts using discrete fills and adding labels with numbers instead of text (e.g. here), but I am unsure how to use the labels feature with scale_fill_gradientn to only insert text at the min and max. At the present I am apt to getting errors:
Error in scale_labels.continuous(scale, breaks) :
Breaks and labels are different lengths
Is this text label possible within ggplot2 for this type of scale / fill?
# The example code here produces an plot for illustrative purposes only.
# create data frame, from ggplot2 documentation
df <- expand.grid(x = 0:5, y = 0:5)
df$z <- runif(nrow(df))
#plot
ggplot(df, aes(x, y, fill = z)) + geom_raster() +
scale_fill_gradientn(colours=topo.colors(7),na.value = "transparent")
For scale_fill_gradientn() you should provide both arguments: breaks= and labels= with the same length. With argument limits= you extend colorbar to minimum and maximum value you need.
ggplot(df, aes(x, y, fill = z)) + geom_raster() +
scale_fill_gradientn(colours=topo.colors(7),na.value = "transparent",
breaks=c(0,0.5,1),labels=c("Minimum",0.5,"Maximum"),
limits=c(0,1))
User Didzis Elfert's answer slightly lacks "automatism" in my opinion (but it is of course pointing to the core of the problem +1 :).
Here an option to programatically define minimum and maximum of your data.
Advantages:
You will not need to hard code values any more (which is error prone)
You will not need hard code the limits (which also is error prone)
Passing a named vector: You don't need the labels argument (manually map labels to values is also error-prone).
As a side effect you will avoid the "non-matching labels/breaks" problem
library(ggplot2)
foo <- expand.grid(x = 0:5, y = 0:5)
foo$z <- runif(nrow(foo))
myfuns <- list(Minimum = min, Mean = mean, Maximum = max)
ls_val <- unlist(lapply(myfuns, function(f) f(foo$z)))
# you only need to set the breaks argument!
ggplot(foo, aes(x, y, fill = z)) +
geom_raster() +
scale_fill_gradientn(
colours = topo.colors(7),
breaks = ls_val
)
# You can obviously also replace the middle value with sth else
ls_val[2] <- 0.5
names(ls_val)[2] <- 0.5
ggplot(foo, aes(x, y, fill = z)) +
geom_raster() +
scale_fill_gradientn(
colours = topo.colors(7),
breaks = ls_val
)