I'm trying to install SyntaxNet on Mac OS X (Sierra 10.12.4), and I've gotten to the step beginning:
Now you can install the SyntaxNet and DRAGNN Python modules with the following commands:
And I've tried the next command:
bazel-bin/dragnn/tools/build_pip_package --output-dir=/tmp/syntaxnet_pkg
And I get the message:
-bash: bazel-bin/dragnn/tools/build_pip_package: No such file or directory
And indeed, when I go look in the folder (alias) bazel-bin, there is no dragnn subfolder, which I guess there is supposed to be given the previous steps? But I think I've followed them (the bazel test passes), and still no such folder.
Related
First of all, I have trouble installing avrdude via Homebrew because of some network problems. So I download it manually from its website.
However, after I unarchive the avrdude-7.0.tar.gz file I just downloaded, I can find no bin directory there. It's unusual.
Then, I added its directory to my system PATH by export PATH=$PATH:/Users/myUserName/Developer/bin/avrdude-7.0/bin/. But when I tried to use avrdude in Terminal after I restarted my computer, It says zsh: command not found: avrdude.
How can I make it works?
screenshot of avrdude-7.0 directory downloaded
Apparently you downloaded the source archive of the tool, not the executable software.
Now you have two options:
Download the binary executable.
Compile the tool yourself. Make sure you understand how to do this.
I am trying to start doing the Pintos Stanford project on Ubuntu. I downloaded the tar file that the Stanford website provides but when I try and run
pintos -- run alarm-multiple
I get the following error:
Unrecognized character \x16; marked by <-- HERE after if ($<-- HERE near column 7 at /home/adambomb/src/pintos/src/utils/pintos line 911
I found on another stackoverflow post that I should pull from latest version of pintos:
git clone git://pintos-os.org/pintos-anon pintos
But doing this gets me an error:
Cloning into 'pintos'...
fatal: read error: Connection reset by peer
I'm not really sure where to go from here and could use some insight to fix either of these problems.
I don't really know where to go from here.
I ran into the same issues as you trying various guides on the internet (eg. this guide) and looking through StackOverflow. However, this youtube video helped me the most.
Steps below can be found here. I'm using Ubuntu 18.04.
Run sudo apt-get install qemu
Get latest pintos source code from pintos public git repository or download older version with this link
2a. Under heads, find master and click the tree hyperlink
2b. Click snapshot and download the .tar.gz file to your directory
Run tar -xvzf pintos-anon-master-{value}.tar.gz where {value} is the commit-id
Open /utils/pintos-gdb with vim and edit GDBMACROS variable to point to the full path for pintos directory
Open Makefile with vim and edit LOADLIBES variable name to LDLIBS
Compile utils directory by navigating to /src/utils and running make
Edit /src/threads/Make.vars (line 7): change bochs to qemu
Compile threads directory by navigating to /src/threads and running make
Edit /utils/pintos (line 103): replace bochs with qemu
Edit /utils/pintos (~line 257): replace kernel.bin with the full path to kernel.bin
Edit /utils/pintos (~line 621): replace qemu with qemu-system-x86_64
Edit /utils/Pintos.pm (line 362): replace loader.bin with the full path to loader.bin
Open ~/.bashrc and add export PATH=/home/.../pintos/src/utils:$PATH to the last line.
Reload terminal by running source ~/.bashrc
Run pintos with pintos run alarm-multiple
I am completely new to all of this, but I was trying to install https://github.com/MrS0m30n3/youtube-dl-gui, which requires twodict.
Now, the manual simply says:
Install From Source
Download & extract source from here
Change directory into twodict-1.2/
Run sudo python setup.py install
Sorry for the idiotic question, but what is meant by "change directory into twodict-1.2/"?
I downloaded the source file, and when I extract it, where do I put it? If What is meant by the step 2? Which command would I have to run exactly? I don't get it.
Running MacOS.
Thanks!
I am trying to install the pyperclip module for Python 3.6 on Windows (32 bit). I have looked at various documentations (Python documentation, pypi.python.org and online courses) and they all said the same thing.
1) Install and update pip
I downloaded get-pip.py from python.org and it ran immediately, so pip should be updated.
2) Use the command python -m pip install SomePackage
Okay here is where I'm having issues. Everywhere says to run this in the command line, or doesn't specify a place to run it.
I ran this in the command prompt: python -m pip install pyperclip. But I got the error message "'python' is not recognized as an internal or external command, operable program or batch file.
If I run it in Python 3.6, it says pip is an invalid syntax. Running it in IDLE gives me the same message.
I have no idea where else to run it. I have the pyperclip module in my python folder. It looks like a really simple problem, but I have been stuck on this for ages!
You need to add the location of the python.exe to your $PATH variable. This depends on your installation location. In my case it is C:\Anaconda3. The default is C:\Python as far as I know.
To edit your path variable you can do the following thing. Go to your Control Panel then search for system. You should see something like: "Edit the system environment variables". Click on this and then click on environment variables in the panel that opened. There you have a list of system variables. You should now look for the Path variable. Now click edit and add the Python path at the end. Make sure that you added a semicolon before adding the path to not mess with your previous configuration.
When I create a new project and select to create a new Git repository, or when I try to change the version control system in project options I receive a RStudio error stating "Incorrect function" with a big X and no extra information.
The below link has a similar issue, but their solution of changing the path for git.exe has not helped (i have tried all three paths)
https://support.rstudio.com/hc/en-us/community/posts/200632528-Git-Error-Incorrect-Function
Some extra notes:
RStudio allows me to clone repository to set new working directory
Also git works in bash, so i feel this is an RStudio issue.
I encountered the same error. For me it also had to do with using a network path not a local directory for the project location (as for lewis1211).
Workaround: Map the network drive. E.g. Map your //server/share to some drive, say Z: (using map network drive, if you are using windows). If you set your project up under Z: then, it works.
If you have already chosen "git.exe" in RStudio --> Tools --> Global Options --> Git/SVN, then try to open Rstudio shell and type git init. In my case it showed "Permission denied", and after running as administrator the problem has gone.
This is only a partial answer if it fixes your problem: I reproduced this when trying to use a network path for a project location. When using a local directory no error occurs. Could indeed be an RStudio issue.
Run you R studio as Project administration.
This solves my issue.
SOLVED.
I had the same problem. The Git-RStudio-Connection fails but git is working perfectly in the CMD. When running the git init command in CMD it works and creates a .git folder. But running the git init command in the RStudio terminal fails with a message Warning: unable to access 'C:/Users/%username%/.gitconfig': Permission denied ... fatal: unknown error occured while reading the configuration files.
The Version Control Sytem (VCS) or git-Panel does not appear in RStudio and selecting it in the projects options leads to the same message Error: Unzulässige Function (eng. Error: Incorrect function).
A closer look into the .gitconfig file should give you a new solution approach hopefully without having administration rights. Comparing the installation on the integration worksation with a productive workstation shows, that on the Test-Machine an incomplete .gitconfig file is on C:/Users/%username%/.gitconfig and on the Productive-Machine a complete gitconfig file is on Z:/.gitconfig. By the way, Z is a mapped drive which is linking to the company's user-profile settings (see CMD > echo %HOMEDRIVE%).
According to this analysis there should be multiple possible solution approaches:
(1) delete the corrupt .gitconfig and hope the the system is correctly looking into your profiles directory
(2) complete the .gitconfig file that all necessary information are there. The message fatal: unknown error occured while reading the configuration files could actually be a hint, that the first message access... permission denied is false and the problem lies in the incomplete file.
(3) Be aware that there can be a confusion between ".gitconfig" as FILE and ".gitconfig" as FOLDER. Check this with changing directory with cd to folder and cat to show the file content. It will tell you that you cannot display a folder as file-content.
(4) Change the location of the config file with git config --file FullnameToGitconfig. e.g. git config --file %USERPROFILE%/.gitconfig or git config --file %USERPROFILE%/.gitconfig/gitconfig or git config --file %HOMEDRIVE%/.gitconfig etc.
[user]
name = DOE John
email = john.doe#acme.com
[merge]
tool = kdiff3
[mergetool "kdiff3"]
path = C:/Program Files/KDiff3/kdiff3.exe
[diff]
guitool = kdiff3
[difftool "kdiff3"]
path = C:/Program Files/KDiff3/kdiff3.exe
[core]
editor = \"C:/Program Files (x86)/GitExtensions/GitExtensions.exe\" fileeditor