I have created basic ASP.Net Core server on Azure Ubuntu VM. I have exposed the server to a port 80 using nginx.
I am conecting to the VM via ssh.
And starting the server with "dotnet run" command.
That works fine.
However, every time I close the ssh connection, the server is stopping as well.
Is there a way to start and keep running the asp.net core server on Linux without having an active ssh connection?
Basically what happens is:
You login with ssh
you startup an application under your user (dotnet run)
Close your ssh => logging out user, which means application is closed.
You need to start a service outside of your user. Here is some information:
https://askubuntu.com/questions/8653/how-to-keep-processes-running-after-ending-ssh-session
Otherwise i'd advice you to ask on https://askubuntu.com/
Related
I am trying to integrate Jenkins and Web deploy v3.5 over "HTTP" connection. The server has IIS 10 and Windows Server 2016. The build is getting failed with an error,
Web deployment task failed. (Could not complete the request to remote agent URL 'http://IPAddress:8172/MSDeploy.axd?site=WebSite'.)
I am using the following command,
/property:configuration=Dev /p:DeployOnBuild=True /p:DeployTarget=MsDeployPublish /p:CreatePackageOnPublish=False /p:AllowUntrusted=True /p:MsDeployPublishMethod=WMSvc /p:MsDeployServiceUrl="http://IpAddress:8172/MSDeploy.axd" /p:DeployIisAppPath="WebSite" /p:AllowUntrustedCertificate=True /p:Username=SomeUsername /p:Password=SomePassword
Troubleshooting:
8172 port is allowed for Jenkins.
Web deployment services are running.
Users have been given with sufficient rights to the directory.
WebDeploy user is added to administrator group.
I am suspecting if Web deploy tool doesn't work over HTTP connection, is that true?
Web Deploy is actually just a way of deploying. The services are running on a server and listening on the port 8172. I do not get why you are using a whole web adress, when all you need is the connection to the server (ip or domain only!).
Example: 0.00.000.000 or example.org
Check if you installed the handler too. You need the web deploy service and handler running.
Regards,
Maheshvara
I encountered the problem by taking following steps,
Ms web deploy works under the secure connection. it should be called by https://
Configured three rules as mentioned under Management Service Delegation Rule
2.1 ---- createApp with WDeployConfigWriter User
2.2 ---- setAcl
2.3 ---- contentPath_intiApp
Reference: https://learn.microsoft.com/en-us/iis/publish/using-web-deploy/configure-the-web-deployment-handler
In 2.1 step, WDeployConfigWriter user needs to be created manually. Web deploy tool use two users WDeployAdmin and WDeployConfigWriter
Reference: https://blog.richardszalay.com/2013/08/02/manually-creating-wdeployadmin-and-wdeployconfigwriter/
I'm trying to write a go application that would allow me to perform reverse ssh tunneling between a Windows machine and a Linux machine using the go ssh library.
In the process of doing so, I create a listener on the remote machine, as follows:
remoteListener, err := sshClient.Listen("tcp", remoteString)
where sshClient is an object of type ssh.Client and is configured to connect to the remote machine.
The issue here is that when the sshd process on the Linux machine disrupts the connection with the application, the ssh Listener remains alive on the remote machine. So, reconnecting with the application fails because a listener is already running on the same port on the remote machine.
How do I get around this issue? Does the ssh library allow me to define a timeout on the listener?
I'm just waiting for the timeout after reconnecting. I found no other easy solution for this.
I'm setting up an ASP.NET MVC5 application on a Windows Server 2012 VM running .Net 4.5 and IIS8. I've always leverages Azure for App and DB services (thank you Azure for your seamless 10 min server setup and publishing solution!) however I need to host this app using this alternative method. The VM is not an Azure VM. I've managed to configure the VM and publish the application (10 hrs of head banging experience... ) however when the application attempts to make a call to the Azure Db during the form registration process I receive a time out error; "The wait operation timed out".
My question is; I can access the application via the ip address from my local machine, I think port 80 is open by default. Do I need to specifically target this port in the applications web.config file for I/O calls?
If you want to connect a non-Azure Virtual machine which is behind a firewall to the resources in Azure, you will have to create a virtual network with either site to site or point to site VPN enabled. Please check this link which explains how to do it. https://azure.microsoft.com/en-us/documentation/articles/vpn-gateway-howto-site-to-site-resource-manager-portal/
I got 2 servers with two equal wcf services hosted on them and one client application server. I can connect to endpoints and send a requests to both services using test wcf client app (.NET Web Service Studio) from my local machine successfully. But when I am trying to connect from client application server using the same test wcf client app I successfully connected only to the one wcf service server, but I have got an error when connecting to another one:
System.Net.WebException: There was an error downloading 'https://XXX/XXX?wsdl'. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it XX.XXX.XX.XXX:443
I performed netstat -an | find "443" command in command prompt on the client server and on my local machine to find out the difference and here what I have got:
1. On my local machine:
2. On the client app server:
What I already tried to do on client application server is:
- turned off firewall;
- stopped windows firewall service
- uninstalled mcafee virusscan enterprise application.
(I tried to set "prevent mass mailing worms from send mail" first, but mcafee was in foreign language that I don't understand, so I just uninstalled it)
after running command netstat -aon | findstr "443" on client application server I have got this result:
but I still got an error.
Does anybody know how to solve this issue?
Could be the problem on the wcf service server side?
The solution was predictable simple one - firewall was blocking the port,
but it's important to notice that the issue was caused by firewall on the wcf service server side, but not on client application server, which is making the request to that service.
I asked the technical support of that server, and they made firewall changes.
After that error was disappeared.
I faced the same issue and tried different ways to fix this. Nothing works. Later i found the issue which is, the application i tried to run is https and in my IIS, https binding was not created. I created binding https with the website and it works.
I have an ASP.NET project (VS2008 on Windows 7 with either webforms, MVC1, or MVC2 -- all the same result for me) which is just the File->New hello world web project. It's using the default ASP.NET development server, and when I start the server with F5, the browser never connects and I get a timeout. I tried to debug this by telnetting to the development server's port while it was running, and I got the same result:
C:\Users\farmercs>telnet localhost 54752
Connecting To localhost...Could not open connection to the host, on port 54752:
Connect failed
I can see in the system tray that the server thinks it's running, and a netstat -a -n command shows that there is indeed an active TCP listener on that port.
This worked in the not-too-distant past, and I could work on web projects using the development server. One thing that has changed since then was that I installed the Microsoft Loopback Adapter to accommodate a local development Oracle installation. I'm not sure this is the problem, but it seems a likely culprit.
I also tried to hit the port using the server name itself (http://mycomputername:54752) but with the same result.
So, what could be blocking me from connecting? And if it's the loopback, then what is a good way for me to retain my ability to connect to my development Oracle server while still being able to use the ASP.NET development server?
have you checked your host file?
%SystemRoot%\windows\system32\drivers\etc\host
look if there is any redirection of localhost or 127.0.0.1 to somewhere else rather than your pc