Related
I'm working on a project where I have to apply the same transformation to multiple variables. For example
a <- a + 1
b <- b + 1
d <- d + 1
e <- e + 1
I can obviously perform the operations in sequence using
for (i in c(a, b, d, e)) i <- i + 1
However, I can't actually assign the result to each variable this way, since i is a copy of each variable, not a reference.
Is there a way to do this? Obviously, it'd be easier if the variables were merged in a data.frame or something, but that's not possible.
Usually if you find yourself doing the same thing to multiple objects, they should be stored / thought-of as single object with sub-components. You say that storing these as a data.frame is not possible, so you can use a list instead. This allows you to use lapply/sapply to apply a function to each element of the list in one step.
a <- c(1, 2, 3)
b <- c(1, 4)
c <- 5
d <- rnorm(10)
e <- runif(5)
lstt <- list(a = a, b = b, c = c, d = d, e = e)
lstt$a
# [1] 1 2 3
lstt <- lapply(lstt, '+', 1)
lstt$a
# [1] 2 3 4
The question states that the variables to increment cannot be in a larger structure but then in the comments it is stated that that is not so after all so we will assume they are in a list L.
L <- list(a = 1, b = 2, d = 3, e = 4) # test data
for(nm in names(L)) L[[nm]] <- L[[nm]] + 1
# or
L <- lapply(L, `+`, 1)
# or
L <- lapply(L, function(x) x + 1)
Scalars
If they are all scalars then they can be put in an ordinary vector:
v <- c(a = 1, b = 2, d = 3, e = 4)
v <- v + 1
Vectors
If they are all vectors of the same length they can be put in data frame or if they are also of the same type they can be put in a matrix in which case we can also add 1 to it.
Environment
If the variables do have to be free in an environment then if nms is a vector of the variable names then we can iterate over the names and use those names to subscript the environment env. If the names follow some pattern we may be able to use nms <- ls(pattern = "...", envir = env) or if they are the only variables in that environment we can use nms <- ls(env).
a <- b <- d <- e <- 1 # test data
env <- .GlobalEnv # can change this if not being done in global envir
nms <- c("a", "b", "d", "e")
for(nm in nms) env[[nm]] <- env[[nm]] + 1
a;b;d;e # check
## [1] 2
## [1] 2
## [1] 2
## [1] 2
In my R function below, I was wondering how I could get the length of the unique elements (which is 2) of two vectors a and b?
Here is what I tried without success:
foo <- function(...){
L <- list(...)
lengths(unique(unlist(L)))
}
a = rep(c("a", "b"), 30) # Vector `a`
b = rep(c("a", "b"), 20) # Vector `b`
foo(a, b) # the function returns 1 1 instead of 2 2
Use lapply() or sapply() because your object is a list. I think you might check the difference between length() and lengths(). They both exist but have different abilities. I provide two solutions foo1 and foo2:
foo1 <- function(...){
L <- list(...)
sapply(L, function(x) length(unique(x)))
}
foo2 <- function(...){
L <- list(...)
lengths(lapply(L, unique))
}
a = rep(c("a", "b"), 30) # Vector `a`
b = rep(c("a", "b"), 20) # Vector `b`
foo1(a, b)
# [1] 2 2
foo2(a, b)
# [1] 2 2
Here is the answer
You were using the unlist function - so you were back at the start with the vector lengths!
use this code instead
foo <- function(a,b){
L <- list(a,b)
lengths(unique(L)) ### this return 1 1
}
a = rep(c("a", "b"), 30) # Vector `a`
b = rep(c("a", "b"), 20) # Vector `b`
foo(a, b)
I'm confused about how this code should work:
foo <- factor(c("a", "b", "a", "c", "a", "a", "c", "c"))
#[1] a b a c a a c c
#Levels: a b c
factor(foo, exclude = "a")
#[1] a b a c a a c c
#Levels: a b c
Warning message:
In as.vector(exclude, typeof(x)) : NAs introduced by coercion
Shouldn't it display factor with all a replaced by NA? If not, how to achieve this?
This bug has been fixed since R-3.4.0. The following answer now only serves as a historical reference.
As I said in my comment, at the moment exclude only works for
factor(as.character(foo), exclude = "a")
rather than
factor(foo, exclude = "a")
Note, the documentation ?factor under R 3.3.1 is not satisfying at all:
exclude: a vector of values to be excluded when forming the set of
levels. This should be of the same type as ‘x’, and will be
coerced if necessary.
The following are not giving any warning or error, but are also not doing anything:
## foo is a factor with `typeof` being "integer"
factor(foo, exclude = 1L)
factor(foo, exclude = factor("a", levels = levels(foo)))
#[1] a b a c a a c c
#Levels: a b c
Actually, the documentation appears quite contradictory, as it also reads:
The encoding of the vector happens as follows. First all the
values in ‘exclude’ are removed from ‘levels’.
so it looks like the developer really expects exclude to be a "character".
This is more likely to be a bug inside factor. The problem is rather evident, that following line inside factor(x, ...) is making a mess when input vector x is of "factor" class:
exclude <- as.vector(exclude, typeof(x))
as in that case typeof(x) is "integer". If exclude is a string, NA will be produced when trying to convert a string to an integer.
I really have no idea why there is such a line inside factor. The subsequent two lines are just doing the right thing, if this line does not exist:
x <- as.character(x)
levels <- levels[is.na(match(levels, exclude))]
So, a remedy / fix is simply eliminating this line:
my_factor <- function (x = character(), levels, labels = levels, exclude = NA,
ordered = is.ordered(x), nmax = NA)
{
if (is.null(x))
x <- character()
nx <- names(x)
if (missing(levels)) {
y <- unique(x, nmax = nmax)
ind <- sort.list(y)
y <- as.character(y)
levels <- unique(y[ind])
}
force(ordered)
#exclude <- as.vector(exclude, typeof(x))
x <- as.character(x)
levels <- levels[is.na(match(levels, exclude))]
f <- match(x, levels)
if (!is.null(nx))
names(f) <- nx
nl <- length(labels)
nL <- length(levels)
if (!any(nl == c(1L, nL)))
stop(gettextf("invalid 'labels'; length %d should be 1 or %d",
nl, nL), domain = NA)
levels(f) <- if (nl == nL)
as.character(labels)
else paste0(labels, seq_along(levels))
class(f) <- c(if (ordered) "ordered", "factor")
f
}
Let's have a test now:
my_factor(foo, exclude = "a")
#[1] <NA> b <NA> c <NA> <NA> c c
#Levels: b c
my_factor(as.character(foo), exclude = "a")
#[1] <NA> b <NA> c <NA> <NA> c c
#Levels: b c
I want to assign multiple variables in a single line in R. Is it possible to do something like this?
values # initialize some vector of values
(a, b) = values[c(2,4)] # assign a and b to values at 2 and 4 indices of 'values'
Typically I want to assign about 5-6 variables in a single line, instead of having multiple lines. Is there an alternative?
I put together an R package zeallot to tackle this very problem. zeallot includes an operator (%<-%) for unpacking, multiple, and destructuring assignment. The LHS of the assignment expression is built using calls to c(). The RHS of the assignment expression may be any expression which returns or is a vector, list, nested list, data frame, character string, date object, or custom objects (assuming there is a destructure implementation).
Here is the initial question reworked using zeallot (latest version, 0.0.5).
library(zeallot)
values <- c(1, 2, 3, 4) # initialize a vector of values
c(a, b) %<-% values[c(2, 4)] # assign `a` and `b`
a
#[1] 2
b
#[1] 4
For more examples and information one can check out the package vignette.
There is a great answer on the Struggling Through Problems Blog
This is taken from there, with very minor modifications.
USING THE FOLLOWING THREE FUNCTIONS
(Plus one for allowing for lists of different sizes)
# Generic form
'%=%' = function(l, r, ...) UseMethod('%=%')
# Binary Operator
'%=%.lbunch' = function(l, r, ...) {
Envir = as.environment(-1)
if (length(r) > length(l))
warning("RHS has more args than LHS. Only first", length(l), "used.")
if (length(l) > length(r)) {
warning("LHS has more args than RHS. RHS will be repeated.")
r <- extendToMatch(r, l)
}
for (II in 1:length(l)) {
do.call('<-', list(l[[II]], r[[II]]), envir=Envir)
}
}
# Used if LHS is larger than RHS
extendToMatch <- function(source, destin) {
s <- length(source)
d <- length(destin)
# Assume that destin is a length when it is a single number and source is not
if(d==1 && s>1 && !is.null(as.numeric(destin)))
d <- destin
dif <- d - s
if (dif > 0) {
source <- rep(source, ceiling(d/s))[1:d]
}
return (source)
}
# Grouping the left hand side
g = function(...) {
List = as.list(substitute(list(...)))[-1L]
class(List) = 'lbunch'
return(List)
}
Then to execute:
Group the left hand side using the new function g()
The right hand side should be a vector or a list
Use the newly-created binary operator %=%
# Example Call; Note the use of g() AND `%=%`
# Right-hand side can be a list or vector
g(a, b, c) %=% list("hello", 123, list("apples, oranges"))
g(d, e, f) %=% 101:103
# Results:
> a
[1] "hello"
> b
[1] 123
> c
[[1]]
[1] "apples, oranges"
> d
[1] 101
> e
[1] 102
> f
[1] 103
Example using lists of different sizes:
Longer Left Hand Side
g(x, y, z) %=% list("first", "second")
# Warning message:
# In `%=%.lbunch`(g(x, y, z), list("first", "second")) :
# LHS has more args than RHS. RHS will be repeated.
> x
[1] "first"
> y
[1] "second"
> z
[1] "first"
Longer Right Hand Side
g(j, k) %=% list("first", "second", "third")
# Warning message:
# In `%=%.lbunch`(g(j, k), list("first", "second", "third")) :
# RHS has more args than LHS. Only first2used.
> j
[1] "first"
> k
[1] "second"
Consider using functionality included in base R.
For instance, create a 1 row dataframe (say V) and initialize your variables in it. Now you can assign to multiple variables at once V[,c("a", "b")] <- values[c(2, 4)], call each one by name (V$a), or use many of them at the same time (values[c(5, 6)] <- V[,c("a", "b")]).
If you get lazy and don't want to go around calling variables from the dataframe, you could attach(V) (though I personally don't ever do it).
# Initialize values
values <- 1:100
# V for variables
V <- data.frame(a=NA, b=NA, c=NA, d=NA, e=NA)
# Assign elements from a vector
V[, c("a", "b", "e")] = values[c(2,4, 8)]
# Also other class
V[, "d"] <- "R"
# Use your variables
V$a
V$b
V$c # OOps, NA
V$d
V$e
here is my idea. Probably the syntax is quite simple:
`%tin%` <- function(x, y) {
mapply(assign, as.character(substitute(x)[-1]), y,
MoreArgs = list(envir = parent.frame()))
invisible()
}
c(a, b) %tin% c(1, 2)
gives like this:
> a
Error: object 'a' not found
> b
Error: object 'b' not found
> c(a, b) %tin% c(1, 2)
> a
[1] 1
> b
[1] 2
this is not well tested though.
A potentially dangerous (in as much as using assign is risky) option would be to Vectorize assign:
assignVec <- Vectorize("assign",c("x","value"))
#.GlobalEnv is probably not what one wants in general; see below.
assignVec(c('a','b'),c(0,4),envir = .GlobalEnv)
a b
0 4
> b
[1] 4
> a
[1] 0
Or I suppose you could vectorize it yourself manually with your own function using mapply that maybe uses a sensible default for the envir argument. For instance, Vectorize will return a function with the same environment properties of assign, which in this case is namespace:base, or you could just set envir = parent.env(environment(assignVec)).
As others explained, there doesn't seem to be anything built in. ...but you could design a vassign function as follows:
vassign <- function(..., values, envir=parent.frame()) {
vars <- as.character(substitute(...()))
values <- rep(values, length.out=length(vars))
for(i in seq_along(vars)) {
assign(vars[[i]], values[[i]], envir)
}
}
# Then test it
vals <- 11:14
vassign(aa,bb,cc,dd, values=vals)
cc # 13
One thing to consider though is how to handle the cases where you e.g. specify 3 variables and 5 values or the other way around. Here I simply repeat (or truncate) the values to be of the same length as the variables. Maybe a warning would be prudent. But it allows the following:
vassign(aa,bb,cc,dd, values=0)
cc # 0
list2env(setNames(as.list(rep(2,5)), letters[1:5]), .GlobalEnv)
Served my purpose, i.e., assigning five 2s into first five letters.
Had a similar problem recently and here was my try using purrr::walk2
purrr::walk2(letters,1:26,assign,envir =parent.frame())
https://stat.ethz.ch/R-manual/R-devel/library/base/html/list2env.html:
list2env(
list(
a=1,
b=2:4,
c=rpois(10,10),
d=gl(3,4,LETTERS[9:11])
),
envir=.GlobalEnv
)
If your only requirement is to have a single line of code, then how about:
> a<-values[2]; b<-values[4]
I'm afraid that elegent solution you are looking for (like c(a, b) = c(2, 4)) unfortunatelly does not exist. But don't give up, I'm not sure! The nearest solution I can think of is this one:
attach(data.frame(a = 2, b = 4))
or if you are bothered with warnings, switch them off:
attach(data.frame(a = 2, b = 4), warn = F)
But I suppose you're not satisfied with this solution, I wouldn't be either...
R> values = c(1,2,3,4)
R> a <- values[2]; b <- values[3]; c <- values[4]
R> a
[1] 2
R> b
[1] 3
R> c
[1] 4
Another version with recursion:
let <- function(..., env = parent.frame()) {
f <- function(x, ..., i = 1) {
if(is.null(substitute(...))){
if(length(x) == 1)
x <- rep(x, i - 1);
stopifnot(length(x) == i - 1)
return(x);
}
val <- f(..., i = i + 1);
assign(deparse(substitute(x)), val[[i]], env = env);
return(val)
}
f(...)
}
example:
> let(a, b, 4:10)
[1] 4 5 6 7 8 9 10
> a
[1] 4
> b
[1] 5
> let(c, d, e, f, c(4, 3, 2, 1))
[1] 4 3 2 1
> c
[1] 4
> f
[1] 1
My version:
let <- function(x, value) {
mapply(
assign,
as.character(substitute(x)[-1]),
value,
MoreArgs = list(envir = parent.frame()))
invisible()
}
example:
> let(c(x, y), 1:2 + 3)
> x
[1] 4
> y
[1]
Combining some of the answers given here + a little bit of salt, how about this solution:
assignVec <- Vectorize("assign", c("x", "value"))
`%<<-%` <- function(x, value) invisible(assignVec(x, value, envir = .GlobalEnv))
c("a", "b") %<<-% c(2, 4)
a
## [1] 2
b
## [1] 4
I used this to add the R section here: http://rosettacode.org/wiki/Sort_three_variables#R
Caveat: It only works for assigning global variables (like <<-). If there is a better, more general solution, pls. tell me in the comments.
For a named list, use
list2env(mylist, environment())
For instance:
mylist <- list(foo = 1, bar = 2)
list2env(mylist, environment())
will add foo = 1, bar = 2 to the current environement, and override any object with those names. This is equivalent to
mylist <- list(foo = 1, bar = 2)
foo <- mylist$foo
bar <- mylist$bar
This works in a function, too:
f <- function(mylist) {
list2env(mylist, environment())
foo * bar
}
mylist <- list(foo = 1, bar = 2)
f(mylist)
However, it is good practice to name the elements you want to include in the current environment, lest you override another object... and so write preferrably
list2env(mylist[c("foo", "bar")], environment())
Finally, if you want different names for the new imported objects, write:
list2env(`names<-`(mylist[c"foo", "bar"]), c("foo2", "bar2")), environment())
which is equivalent to
foo2 <- mylist$foo
bar2 <- mylist$bar
I want to assign multiple variables in a single line in R. Is it possible to do something like this?
values # initialize some vector of values
(a, b) = values[c(2,4)] # assign a and b to values at 2 and 4 indices of 'values'
Typically I want to assign about 5-6 variables in a single line, instead of having multiple lines. Is there an alternative?
I put together an R package zeallot to tackle this very problem. zeallot includes an operator (%<-%) for unpacking, multiple, and destructuring assignment. The LHS of the assignment expression is built using calls to c(). The RHS of the assignment expression may be any expression which returns or is a vector, list, nested list, data frame, character string, date object, or custom objects (assuming there is a destructure implementation).
Here is the initial question reworked using zeallot (latest version, 0.0.5).
library(zeallot)
values <- c(1, 2, 3, 4) # initialize a vector of values
c(a, b) %<-% values[c(2, 4)] # assign `a` and `b`
a
#[1] 2
b
#[1] 4
For more examples and information one can check out the package vignette.
There is a great answer on the Struggling Through Problems Blog
This is taken from there, with very minor modifications.
USING THE FOLLOWING THREE FUNCTIONS
(Plus one for allowing for lists of different sizes)
# Generic form
'%=%' = function(l, r, ...) UseMethod('%=%')
# Binary Operator
'%=%.lbunch' = function(l, r, ...) {
Envir = as.environment(-1)
if (length(r) > length(l))
warning("RHS has more args than LHS. Only first", length(l), "used.")
if (length(l) > length(r)) {
warning("LHS has more args than RHS. RHS will be repeated.")
r <- extendToMatch(r, l)
}
for (II in 1:length(l)) {
do.call('<-', list(l[[II]], r[[II]]), envir=Envir)
}
}
# Used if LHS is larger than RHS
extendToMatch <- function(source, destin) {
s <- length(source)
d <- length(destin)
# Assume that destin is a length when it is a single number and source is not
if(d==1 && s>1 && !is.null(as.numeric(destin)))
d <- destin
dif <- d - s
if (dif > 0) {
source <- rep(source, ceiling(d/s))[1:d]
}
return (source)
}
# Grouping the left hand side
g = function(...) {
List = as.list(substitute(list(...)))[-1L]
class(List) = 'lbunch'
return(List)
}
Then to execute:
Group the left hand side using the new function g()
The right hand side should be a vector or a list
Use the newly-created binary operator %=%
# Example Call; Note the use of g() AND `%=%`
# Right-hand side can be a list or vector
g(a, b, c) %=% list("hello", 123, list("apples, oranges"))
g(d, e, f) %=% 101:103
# Results:
> a
[1] "hello"
> b
[1] 123
> c
[[1]]
[1] "apples, oranges"
> d
[1] 101
> e
[1] 102
> f
[1] 103
Example using lists of different sizes:
Longer Left Hand Side
g(x, y, z) %=% list("first", "second")
# Warning message:
# In `%=%.lbunch`(g(x, y, z), list("first", "second")) :
# LHS has more args than RHS. RHS will be repeated.
> x
[1] "first"
> y
[1] "second"
> z
[1] "first"
Longer Right Hand Side
g(j, k) %=% list("first", "second", "third")
# Warning message:
# In `%=%.lbunch`(g(j, k), list("first", "second", "third")) :
# RHS has more args than LHS. Only first2used.
> j
[1] "first"
> k
[1] "second"
Consider using functionality included in base R.
For instance, create a 1 row dataframe (say V) and initialize your variables in it. Now you can assign to multiple variables at once V[,c("a", "b")] <- values[c(2, 4)], call each one by name (V$a), or use many of them at the same time (values[c(5, 6)] <- V[,c("a", "b")]).
If you get lazy and don't want to go around calling variables from the dataframe, you could attach(V) (though I personally don't ever do it).
# Initialize values
values <- 1:100
# V for variables
V <- data.frame(a=NA, b=NA, c=NA, d=NA, e=NA)
# Assign elements from a vector
V[, c("a", "b", "e")] = values[c(2,4, 8)]
# Also other class
V[, "d"] <- "R"
# Use your variables
V$a
V$b
V$c # OOps, NA
V$d
V$e
here is my idea. Probably the syntax is quite simple:
`%tin%` <- function(x, y) {
mapply(assign, as.character(substitute(x)[-1]), y,
MoreArgs = list(envir = parent.frame()))
invisible()
}
c(a, b) %tin% c(1, 2)
gives like this:
> a
Error: object 'a' not found
> b
Error: object 'b' not found
> c(a, b) %tin% c(1, 2)
> a
[1] 1
> b
[1] 2
this is not well tested though.
A potentially dangerous (in as much as using assign is risky) option would be to Vectorize assign:
assignVec <- Vectorize("assign",c("x","value"))
#.GlobalEnv is probably not what one wants in general; see below.
assignVec(c('a','b'),c(0,4),envir = .GlobalEnv)
a b
0 4
> b
[1] 4
> a
[1] 0
Or I suppose you could vectorize it yourself manually with your own function using mapply that maybe uses a sensible default for the envir argument. For instance, Vectorize will return a function with the same environment properties of assign, which in this case is namespace:base, or you could just set envir = parent.env(environment(assignVec)).
As others explained, there doesn't seem to be anything built in. ...but you could design a vassign function as follows:
vassign <- function(..., values, envir=parent.frame()) {
vars <- as.character(substitute(...()))
values <- rep(values, length.out=length(vars))
for(i in seq_along(vars)) {
assign(vars[[i]], values[[i]], envir)
}
}
# Then test it
vals <- 11:14
vassign(aa,bb,cc,dd, values=vals)
cc # 13
One thing to consider though is how to handle the cases where you e.g. specify 3 variables and 5 values or the other way around. Here I simply repeat (or truncate) the values to be of the same length as the variables. Maybe a warning would be prudent. But it allows the following:
vassign(aa,bb,cc,dd, values=0)
cc # 0
list2env(setNames(as.list(rep(2,5)), letters[1:5]), .GlobalEnv)
Served my purpose, i.e., assigning five 2s into first five letters.
Had a similar problem recently and here was my try using purrr::walk2
purrr::walk2(letters,1:26,assign,envir =parent.frame())
https://stat.ethz.ch/R-manual/R-devel/library/base/html/list2env.html:
list2env(
list(
a=1,
b=2:4,
c=rpois(10,10),
d=gl(3,4,LETTERS[9:11])
),
envir=.GlobalEnv
)
If your only requirement is to have a single line of code, then how about:
> a<-values[2]; b<-values[4]
I'm afraid that elegent solution you are looking for (like c(a, b) = c(2, 4)) unfortunatelly does not exist. But don't give up, I'm not sure! The nearest solution I can think of is this one:
attach(data.frame(a = 2, b = 4))
or if you are bothered with warnings, switch them off:
attach(data.frame(a = 2, b = 4), warn = F)
But I suppose you're not satisfied with this solution, I wouldn't be either...
R> values = c(1,2,3,4)
R> a <- values[2]; b <- values[3]; c <- values[4]
R> a
[1] 2
R> b
[1] 3
R> c
[1] 4
Another version with recursion:
let <- function(..., env = parent.frame()) {
f <- function(x, ..., i = 1) {
if(is.null(substitute(...))){
if(length(x) == 1)
x <- rep(x, i - 1);
stopifnot(length(x) == i - 1)
return(x);
}
val <- f(..., i = i + 1);
assign(deparse(substitute(x)), val[[i]], env = env);
return(val)
}
f(...)
}
example:
> let(a, b, 4:10)
[1] 4 5 6 7 8 9 10
> a
[1] 4
> b
[1] 5
> let(c, d, e, f, c(4, 3, 2, 1))
[1] 4 3 2 1
> c
[1] 4
> f
[1] 1
My version:
let <- function(x, value) {
mapply(
assign,
as.character(substitute(x)[-1]),
value,
MoreArgs = list(envir = parent.frame()))
invisible()
}
example:
> let(c(x, y), 1:2 + 3)
> x
[1] 4
> y
[1]
Combining some of the answers given here + a little bit of salt, how about this solution:
assignVec <- Vectorize("assign", c("x", "value"))
`%<<-%` <- function(x, value) invisible(assignVec(x, value, envir = .GlobalEnv))
c("a", "b") %<<-% c(2, 4)
a
## [1] 2
b
## [1] 4
I used this to add the R section here: http://rosettacode.org/wiki/Sort_three_variables#R
Caveat: It only works for assigning global variables (like <<-). If there is a better, more general solution, pls. tell me in the comments.
For a named list, use
list2env(mylist, environment())
For instance:
mylist <- list(foo = 1, bar = 2)
list2env(mylist, environment())
will add foo = 1, bar = 2 to the current environement, and override any object with those names. This is equivalent to
mylist <- list(foo = 1, bar = 2)
foo <- mylist$foo
bar <- mylist$bar
This works in a function, too:
f <- function(mylist) {
list2env(mylist, environment())
foo * bar
}
mylist <- list(foo = 1, bar = 2)
f(mylist)
However, it is good practice to name the elements you want to include in the current environment, lest you override another object... and so write preferrably
list2env(mylist[c("foo", "bar")], environment())
Finally, if you want different names for the new imported objects, write:
list2env(`names<-`(mylist[c"foo", "bar"]), c("foo2", "bar2")), environment())
which is equivalent to
foo2 <- mylist$foo
bar2 <- mylist$bar