I just started using SignalR (latest 2.0.3) on project running latest IIS and Visual Studio 2013.
I noticed an issue where sometimes the web page just hangs trying to load for an abnormal amount of time (never actually loads).
When this happens, I go into Visual Studio and hit the square to stop debugging, and visual studio starts to hang (not that it freezes VS but just loading symbol trying to stop debugging never actually stops debugging)
I realized the solution is to stop IIS which immediately causes the page to load and visual studio to respond and stop debugging. Start IIS and it's back to normal but this has occured multiple times already.
When this happens, try checking the current requests in IIS (go to Worker Processes in the IIS server features view and double-click the App Pool of your website) and I suspect you'll find 10 of them in process. This can happen because IIS on Win7/Win8 is limited to 10 concurrent requests and depending on your app, signalR could be using all of them up. and once all of those requests are used up, new requests will hang.
You can also kill them requests by recycling the App Pool.
There are a number of questions on stackoverflow relating to being 'unable to start debugging on the web server...' but I have variation of this problem: it's intermittent and it goes away if I restart VS2012. This would tend to indicate that some process or other is locking up another process, or a file is locked, etc, etc by devenv.exe (ie VS2012) and closing VS unlocks the file/process/whatever.
The Visual Studio solution contains a number of MVC4 websites that use IIS running on my 64-bit Windows 7 development computer. All the website, domain model and test projects in this VS solution are configured for .NET 4.5. MvcBuildViews is set to true in the CS project file.
I've tried recycling the IIS application pool for the start-up project, stopping and starting the IIS site, resetting IIS completely, to no avail. I have a suspicion the error message may actually be incorrect, but it's only a suspicion. Any ideas anyone?
I am using Visual Studio 2008 SP1 with .NET Framework sp1. I am not using IIS but the built-in server provided by vs 2008.
I have an ASP.NET MVC project, which sometimes when started opens the browser window & just keeps on trying to load the default page. After stopping the application & killing the webserver, there's still always an instance of WebDev.WebServer.EXE running in taskmanager.
For whatever reason, I am unable to kill this process & I have no choice but to restart my system. Is there a solution for this?
There is probably something in your application that causes the server to hang. Does the server hang when you try to launch any project or one specific project?
To kill the process without rebooting, use the awesome ProcMon while running as admin.
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
To kill the process without rebooting, use Process Explorer
http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
For now, i started using IIS instead of Cassini, so i don't have to deal with webdev.webserver.exe issues.
I get the following error pretty regularly when compiling in Visual Studio and running my web application:
"Unable to start debugging on the web server. The web server did not respond in a timely manner. This may be because another debugger is already attached to the web server."
Normally this is after having debug the application once already. From the command line I run "iisreset /restart" and it fixes the problem.
How do I prevent this from happening in the first place?
The solution that worked for me:
Open Command Prompt (Run as Administrator)
Write iisreset /restart
Now, go back to your VS and debug. It will debug your solution.
It worked for Visual Studio 2013 and 2015 too in my case.
I find that this happens if I'm debugging with Firefox as my browser. When I exit Firefox the VS2005/8 debug session doesn't terminate. I have not found a solution for this (yet).
If this is what's happening with you then a quicker solution than running iisreset is to hit Shift-F5 when in Visual Studio and this will terminate the current debug session. You can then hit F5 and this will start a new debug session.
After trying all of the proposed solutions here and in other places (at least 10 different approaches), the only option that worked for me was:
delete website and application pool on IIS
re-create website and application pool on IIS (in my case, everything exactly the same config as before)
PS: I am using VS 2013 and IIS 7.5 (Win7).
I hope this saves someone else a few hours.
Go to task manager and end process aspnet_wp.exe before running application
I have had this problem a couple times. One time it was resolved by taking Guy's advice:
If this is what's happening with you then a quicker solution than running iisreset is to hit Shift-F5 when in Visual Studio and this will terminate the current debug session. You can then hit F5 and this will start a new debug session.
On a separate occasion I had to: terminate all my IIS worker processes in the windows task manager (w3wp.exe*). You should be able to hit f5 in visual studio to debug.
It sounds like you are probably hitting F5 in Visual Studio when you receive this error?
There are a few things you can try. The easiest is to hit the Stop button before hitting F5. Optionally, when you are finished debugging and starting to make changes you can go to the Debug menu and choose either Stop Debugging or Terminate All.
We use another way of debugging, we never use F5 anymore.
We use a macro kind of like: http://blogs.conchango.com/howardvanrooijen/archive/2007/06/24/Attach-to-Web-Server-Macro-for-Visual-Studio.aspx (Which we bound to F6).
This way you simply attach the debugger to IIS. It's (depending on project size) much quicker to make you changes, compile a single project that you changed and attach the debugger again.
When debugging 2 web application (1 MVC and 2 is MVC WebAPI) that are both hosted in the local IIS.
Make sure that each application is using a different application pool.
I encountered the same issue and as soon as I change the app pool of the other one, it worked!
I saw this message first time in my life and I was very confused about what is going on as it is not pretty obvious what to do.
I ran iisreset and it took just 1 sec to finish the execution, and boom, I was back into the game.
P.S. I am using chrome
Hit Shift+F5 when in Visual Studio and this will terminate the current debug session. You can then hit F5 and this will start a new debug session.
or
close your application, reset iis then open your application and run it
For me I had two visual studio open. The debugger already was attached to another visual studio :). I stopped it on the first one and was able to attach on the second visual studio.
Very basic - but check that if you try to run the web site from IIS by clicking on "Browse", the site actually runs.
It sounds like something is eating up your web server's resources. Perhaps you have some resources (file handlers, wcf proxies) that are being opened and not closed? I've had this happen to me specifically when I was not closing WCF client proxy connections.
The problem is not necessarily that you have a debugger attached, but only that the web server is not responding in a timely manner. Note that the message says "This may be because another debugger is attached".
If you have a lot of break points this will slow the debugging process down, so remove unneeded break points and close the Autos window this will solve your problem
The issue is normally there when an another instance of iexplore is still running. I used to have the issue when my IE crashes but I can still see it in the Task Manager. Once you "End Process" everything is back to normal :)
I ran into this issue when trying to debug (2) separate solutions in VS.NET and both were using the IIS Web Server to launch the app. The 1st application will start, but any subsequent applications started that also run via IIS will then display that error. It seems that it can only debug a single application via VS.NET hosted in IIS at a time.
The solution: run project 1 from VS.NET (place any needed breakpoints) and start the second application directly from IIS (not VS.NET). Your breakpoints in App 1 (running in VS.NET) will be hit when accessing App 2 (ran from IIS directly).
This happens to me quite a bit in VS 2010 express - Usually because the debugger stopped responding.
Right click windows taskbar, select 'Start Task Manager'. More than likely the ASP.NET debugger will be showing a 'not responding' status. Select it and simply terminate the process.
Done!
With me it happened when IE was upgraded to newer version, went to Installed Updates, removed new version of IE, after computer restarted it went back to old version and problem with debugging was solved
Had the same problem, even after a reboot. Basically did this:
Restart IIS
Clean Solution
Rebuild Solution
Then it started working again.
This can also be caused if your website uses a database connection but the database server is unavailable.
I spent some time trying to resolve this issue in the usual ways, but even after restarting my workstation, the issue remained. Eventually I found that the SQL Server (MSSQLSERVER) service was not running.
It should have been running, as it's set to Automatic, but it was stopped, even after the reboot. All the MSSQLSERVER events in the event log appeared normal, so it remains unknown why it wasn't running, but I have now set it to Automatic (delayed start) in the hope that this will reduce resource contention during startup.
Once I started MSSQLSERVER , the message "Unable to start debugging on the web server. The web server did not respond in a timely manner" no longer appeared and normal service was resumed.
I had to recreate the site/application/virtual directory to make it work after I installed vs2015 update3. Hope this helps someone. ;)
I know this is an old question, but I met the same situation recently and try every solution in this post, and no luck. Finally, I found the solution that works for me:
Close Visual Studio
Find Turn Windows features on or off in Control Panel
Uncheck Internet Information Services in the popup dialog
Restart your computer
Check Internet Information Services in the same dialog, and make sure Internet Information Service -> World Wide Web Services -> Application Development Features -> ASP.NET also been checked
Open Visual Studio, and now your application should be able to run in debug mode
Open
Options and Settings Under the debug
Symbols and unchecked Microsoft Symbol Servers
build solution
iisreset
F5 solution
(Be sure Microsoft Symbol Servers unchecked again)
This worked for me by #mtkachenko
Visual Studio 2012: Unable to attach the process. A debugger is already attached
"I have installed Debug Diagnostic Tool v2.0 and as a result I have Debug Diagnostic Service which is started automatically and attached to one of w3wp processes. After turning off and disabling this service all works fine. So if you get such error check processes in task manager which can capture your w3wp process"
I got it worked by creating a new ApplicationPool in the IIS Server and pointing my application to the new ApplicationPool. I have also deleted the old ApplicationPool
This answer will only apply if you are running your solution through IIS. You will know if this applies to you IF you open up your website/project by doing the following:
From within visual studio-->Open Website--> Local IIS -->Select your project
This error Kicked my butt for 4 hours but finally I found an answer. I first attempted the iisreset /restart. This seemed to slightly help but still received the same error.
What worked for me was going (xp machine) to add/remove programs --> Add/Remove Windows Components--> Click on IIS--> Click on "Details". Be sure to have Front Page Extensions installed if you are debugging through IIS.
If all the answers does not work for you, just end process all IIS related components in task manager. This is what worked for me.
I just solved this problem on my machine.
My problem is that I upgraded IE 9 To IE 10 and I got this error.
Solution : Remove IE 10 and downgrade to IE 9.
Go to "Programs and Features" --> "View recent updates" --> find IE 10---> Uninstall it-->reboot--->ie 9 is back--->debug--->works OK.
Try performing either of the following steps to resolve your issue:
Restart your IIS Server
Clean the Solution of your project then build again
If above steps do not help, you can finally try restarting your machine
In your cmd type iisreset and press enter after that your iis is reset and your application is working perfectly