i'm writing a test case in a grid based software
I'm mostly using css selectors to select elements and perform clicking
based on the image - I'm selecting the right circled element (base don a css class that displays the blue dot ), now, based on this condition, I want to select the first sibling element - which is a "plus", basically that would open the sub grid further and allow me to run further testing
I can't seem to be able to do that -
assuming that I'm using the following sample html
<div class="td">
<a class="opener">
....
</a>
</div>
<div class="td">
...
</div>
<div class="td">
...
</div>
<div class="td">
...
</div>
<div class="td">
...
</div>
<div class="td">
<a class="round-solid">
...
</a>
</div>
I can select "round-solid" - based on this, how do I select "opener" element ?
I only want the opener element for which a specific column contains the "round-solid" class
That should do the trick:
driver.findElement(By.xpath("//a[#class='round-solid']/../preceding-sibling::div/a[#class='opener']"));
Related
Currently, if I have:
My header
=========
`My header`_
rst2html Docutils 0.14 produces:
<div class="document" id="my-header">
<h1 class="title">My header</h1>
<p><a class="reference internal" href="#my-header">My header</a></p>
Is it possible to obtain the following ouptut instead:
<h1 class="title" id="my-custom-header">My header</h1>
<p><a class="reference internal" href="#my-custom-header">My header</a></p>
So note how I want two changes:
the id to be inside the heading, not on a separate div
control over the actual id
The closest I could get was:
<div class="document" id="my-header">
<span id="my-custom-header"></span>
<h1 class="title">My header</h1>
<p><a class="reference external" href="my-custom-header">My header</a></p>
but this is still not ideal, as I now have multiple ids floating around, and not inside the h1.
Asciidoc for example has that covered with:
[[my-custom-header]]
== My header
<<my-custom-header>>
How do I change the value of DIV if it has no ID or class? here's a sample code:
<div id=1>
<div id=2>
<div id=3>
<div id=4>
<div><span>div without id or class</span></div>
</div>
</div>
</div>
</div>
Since you know the div id="4", you can do something like.
document.getElementById('4').firstElementChild.innerHtml = 'stuff you want to change to'
If you don't know, and you're a bit masochistic and don't want to use jquery, you can use a combination of .firstChild .nextSibling to walk your way to the div with the desired set of stuffs.
I'm working inside a templated system where i can implement code, but i can't modified the core of the file. My layer are stacked like this:
<div class="layer1">
<div class="layer2">
<div class=" layer3">
<div class="layer4">
</div>
</div>
</div>
</div>
<div class="layer1">
<div class="layer2">
<div class=" layer3">
<div class="layer4">
</div>
</div>
</div>
</div>
<div class="layer1">
<div class="layer2">
<div class=" layer3">
<div class="layer4">
</div>
</div>
</div>
</div>
As you can see, my class all have the same name (layer1, layer2, etc...). I want to know if there's a way by using Javascript, Jquery or any other online client side library to modify the CSS class name so, for example, the first layer1 become level1 and the following layer1 become level 2?
Thank for your answer!
As other people already said, jQuery actually does what you want.
As long as you don't know the number of “layers” you have, you better find all elements by classname substring:
$('*[class^="layer"]')
Then you can get the list of the element classes and change old names to new ones.
Many different ways to do this:
Solution 1:
Use addClass() and removeClass()
$(".layer1").removeClass('old_class').addClass('new_class');
Replace old_class with your older class and new_class with your new class
Solution 2:
If you are able to get the element by ID
You can set the class by using .attr()
$("#id").attr('class', 'new_class');
an all around solution working with className :
var elem=document.querySelectorAll('[class^="layer"]') ;
for(i in elem){
x = elem[i].className;
var y=x.replace("layer" , "level");
elem[i].className=y||x;
}
I have a problem with rendering the Pageable response (using Thymeleaf 2.0.19) content to be displayed in rows of <div class="span3">. The row values are dynamic from Spring 3 MVC controller.
Below is the UI code i need to display product images in rows with each row containing 4 cols of span3.
UI snippet to display the product images in 4 cols per row.
<div class="container">
<div class="row-fluid" th:remove="all-but-first">
<div th:each="asset,assetIter : ${page.content}" th:with="numList=${#strings.listSplit('3,2,1,0', ',')}" th:if="${assetIter.index}%4 == 0" class="span3">
<div class="col-sm-6 col-md-3">
<div class="thumbnail">
<span><img src="../abc.png" /></span>
<div class="caption">
<p>Label1 : <span th:text="${asset.id}">Id</span></p>
<p>Label2: <span th:text="${asset.name}">Name</span></p>
<p>Label3: <span th:text="${asset.category}">Category</span></p>
</div>
</div>
</div>
</div>
</div>
</div>
I tried one of the post responses from "Younghan Kim" posted at in thymeleaf, how can write th:each to combine rows and columns?, however i need to display the values from within the page response object which is however String values in the response above.
So, how do i display the above code as rows with 4 cols. Please provide inputs and let me if i am missing out on something as i am new to thymeleaf impl.
Also the UI pagination is implemented on server side as mentioned in the blog below:
http://www.jiwhiz.com/post/2013/2/Implement_Bootstrap_Pagination_With_SpringData_And_Thymeleaf
I have the following HTML code:
<table id="userPlaylistTable" cellspacing="0" cellpadding="0">
<div class="numCellWrapper">
<div class="listArrow up" onclick="moveRowUp($(this))"></div>
<div class="numCell"> 1 </div>
<div class="listArrow down" onclick="moveRowDown($(this))"></div>
</div>
<div class="numCellWrapper">
<div class="listArrow up" onclick="moveRowUp($(this))"></div>
<div class="numCell"> 2 </div>
<div class="listArrow down" onclick="moveRowDown($(this))"></div>
</div>
<div class="numCellWrapper">
<div class="listArrow up" onclick="moveRowUp($(this))"></div>
<div class="numCell"> 3 </div>
<div class="listArrow down" onclick="moveRowDown($(this))"></div>
</div>
Basically, now if I define my css as:
css=table#userPlaylistTable div[class='listArrow up']
It picks the first such element it finds. But, how would I have to define my css, so that it picks second element of this type?
So, basically how would I define my css to pick a particular element, if multiple elements of the same kind exist on the page?
Could someone please help me with this query?
Thanks.
You need to do something like:
css=table#userPlaylistTable>div[class='listArrow up']:nth(1)
css=table#userPlaylistTable>div[class='listArrow up']:nth(2)
This will give you the 2nd and the 3rd instance
add [1] which is the index into the array. usually 0 based, so [1] is the second element
css: #userPlaylistTable .listArrow.up:nth-of-type[2]
Instead of [2] replace with item you want to select
Description:
id is # -- #userPlaylistTable
class by . listArrow up, but we have space between class name so replace space with . -- .listArrow.up
:nth-of-type(n) will select child