After using insertNewRowBefore method from the PHPExcel 1.8.0 library, the cell references defined in the active sheet (i.e. sheet1) are correctly updated. However the cell references from the other sheets (e.g. sheet1!A10) remain unchanged.
Is there a way to update them as well?
No there isn't.
The logic that updates the cell references in the same worksheet is heavily intensive and slow, and we implemented a trade-off rather than execute it for all worksheets, adding a very big overhead. It can be executed manually using an adaptation of the logic from the PHPExcel_ReferenceHelper::insertNewBefore() and related methods
Related
We implemented an IPython extension using the #magics_class (and #line_magic and #cell_magic) annotations. It is working quite well for the most part, with one important limitation. #cell_magic only gets the cell contents as an argument, but we need a way of identifying the actual cell somehow.
I suspect IPython would internally have an identifier for each cell, but this is not passed into the cell magic as far as I can tell.
The reason for needing this is because we want different functionality depending on whether the call is the result of an edit or whether it's a new cell.
Thanks!
My project contains a lot of objects like views and stored procedures which are being changed quite frequently. Now I have to create new SQL script on every update which contains complete source code of changed objects despite I've actually changed only few rows. It leads to massive code duplication and I also found it difficult to review these changes.
I'd like to have only one actual version of SQL script for every object like view or procedure and recreate these objects every time I redeploy the database. As result I could change existing source file (like in Java or C programming) instead of creating a new update every time I need to alter view or procedure.
Is there a possibility to execute some scripts every time I migrate the database with Flyway?
I'm not sure why that got so many downvotes, it's a perfectly understandable and valid question. Perhaps it's because it closely resembles this open question:
Migrating Stored Procedures with Flyway
We are actually starting to push against this issue now. We've been using flyway for development and testing (and love it). But we've come to a point where we're starting to have to use procs/triggers/views (p/t/v's) and the fundamental disconnect between how we did it before, and how we must use flyway, is starting to be a strain.
Before, for a given database object (let's say it's a procedure), there'd be one source file. And if you needed to change the proc 'n' times, there would be 'n' versions of the same file in your VCS. Diff tools work great, IDE's all understand this, merges detect when two developers working in separate branches make changes to the proc, etc, etc. You know, old school.
But with flyway, any one proc with 'n' changes is now scattered across 'n' files. Instead of "one object in one file with 'n' versions", you have "one objecct in 'n' files with one change each". I now need to do a text search in my IDE for any instance of "proc_name" if I want to know the history of changes to the proc. The VCS knows nothing about it. Devs can each make a migration in their own branches that succeed when each is deployed, but leave the proc with a missing update.
I'm not saying any of this to complain about flyway, and I fully realize it's not a simple area. I'd almost say it's unsolveable (by flyway).
We're scheming how to handle this problem, and I'd be very interested to know how others have handled it.
Repeatable migrations are supported by Flyway 4.0, now.
Just add sql files starting with "R" without any version information to your migration folder:
R__Blue_cars.sql
You have to ensure, that the script could be repeatable migrated.
This is usually done by "CREATE OR REPLACE" clauses in your DDL statements.
https://flywaydb.org/documentation/migration/repeatable
What would be the best approach to replace placeholders in a .docx document (Word 2010) with data coming from a MySQL database?
Can I just open the file using a server side language and do a string replace per each placeholder?
Is there any existing tool/library available?
Thanks
Disclosure: I work for Invantive.
Using Invantive Composition (http://www.invantive.com/products/invantive-composition) you can fill Word documents (letters, legal pleadings, insurancy policies) with data from a database (IBM DB2, Oracle, MySQL, Teradata and SQL Server) and then fully change the contents at will manually. It is intended for real Microsoft Word end-users (both the guys that make the template and the ones that use it) that access the databases through a central webservice and models with queries. Invantive Composition allows nested repeating groups of data and lay-out. Integrates into Microsoft Word using click once.
In the past, I personally have also been using JasperReports (http://community.jaspersoft.com/project/jasperreports-library) to generate letters using the RTF output target of JasperReports. It is free and works fine as long as you do not want to edit the output more than a few words and have Java/SQL development skills. Just as Invantive Composition it works fine for large numbers of different reports.
As long as you can control the environment completely, you can also consider using RTF as intermediate language (not for end-users, only real developers). Save document as RTF, replace parts of the text you need to be replacable, write a webservice that accepts the parameter and dumps back the resulting RTF. Takes some time to generate more complex tables (tables are obviously something invented by the human race after the RTF specification was written :-) This approach only works with very limited number of templates and when you have sufficient developer time available to get it up and running and stabilized.
As an independent reviewer, I have also seen cases where XML templates were used, but the results were not as good as with JasperReports.
**Disclosure: I lead the docx4j project **
There are heaps of existing tools/libraries available!
Yes, you can just do a string replace, but that is a brittle approach, since Word may have split the string across runs.
You can use MERGEFIELDs, or content control data binding.
docx4j supports all three approaches, but content control data binding is the most powerful.
ContentControlsMergeXML
MERGEFIELDs
VariableReplace
One thing to consider especially is "repeats". If you want say a row of a table in Word, for each matching row in your MySQL table, then you need a way to make this happen.
docx4j does this with a "repeat" content control around the table row; whichever solution you choose, I'd make sure up front that it can handle repeats.
If you want to use PHP the most complete available solution is PHPDocX.
You may check in the tutorial how to substitute placeholder variables by data coming from any data source (like a MySQL DB).
In particular, you may populate table rows with an indefinite number of entries and you may delete whole blocks of the Word document depending on the data fed to the application or build dynamical Word charts.
You may check the available DEMO for a simple but quite illustrative example (its inner workings are explained in the tutorial section).
You can use open Open XML SDK and replace your placeholders like this.
Disclosure: I lead the docxgenjs project
I think you shouldn't have to code everything by yourself, that's why I created a Mustache-like templating engine for docx
Demo:
http://javascript-ninja.fr/docxgenjs/examples/demo.html
Repo
https://github.com/edi9999/docxgenjs
It is JS-based and works client and server side.
Yes, you can use server side language to do it.
Check on apache POI.
http://poi.apache.org
Hello I read the above esp the comments and Ivantive looks impressive - but the solution I needed was much simpler. Use Selection.Range.InsertDatabase in Word to fetch records from an access database or excel spreadsheet or even just another word document. With the access solution you can choose the layout of the records to fetch and have it fetch just particular recordds based on a field (eg ID). Google the words above and it'll take you to MS guidance and an example VB script. Worked well in just a few mins. Now looking for VB script that asks the person what ID they want from the dbase and we're done.
it uses docx templates that have merge fields with java objects (the objects have the information you load from mysql or any other source). The xdoc report is an project for java language, the home page of the project is https://code.google.com/p/xdocreport/.
*Disclosure: I create the templ4docx project *
Hello
You can use templ4docx java library, which is on maven central repository, so you can just add it to your maven dependencies:
<dependency>
<groupId>pl.jsolve</groupId>
<artifactId>templ4docx</artifactId>
<version>2.0.0</version>
</dependency>
Example usage:
Docx docx = new Docx("E:\\template.docx");
Variables variables = new Variables();
variables.addTextVariable(new TextVariable("${firstName}", "John"));
variables.addTextVariable(new TextVariable("${lastName}", "Sky"));
docx.fillTemplate(variables);
docx.save("E:\\filledTemplate.docx");
More details you can find here: http://jsolve.github.io/java/templ4docx/
I found this tool but I wonder if it still the right way nowdays with net 4.0 or is there any straight forward oob alternatives.
I just need to add columns and update excel stuff programatically. There are many ways but I need to keep the original document as a template. The link above explains exactly what the requeriments are and why they created such "ExcelPackage" library.
A quick look at the link you provided seems like it will in fact keep the original template intact and just return a populated version of that template. This is a pretty common way to create and populate Excel documents using Open XML since it helps to minimize the amount of code you have to write. If you did not specify the layout, styles, formats, etc in a template you would be forced to define those when coding and that could lead to some bloated code. Overall, a project like this or using the Open XML SDK 2.0 to create the documents is the way to go.
I am uploading several files to Alfresco repsitory via webdav. The batch process works fine, but after the upload, all dates in the repository are changed to current date.
How can I make it keep and show the original file dates (creation and modified) ?
Thanks.
You can leverage metadata extractors. The main purpose is to extract metadata from binary files during upload. There are lots of built-in metadata extractors, just look for implementers of interface org.alfresco.repo.content.metadata.MetadataExtracter. There are different extractors that can extract creation date and set it as cm:created on Alfresco node.
You can enable metadata extraction by applying it as a rule on a space, look for action named Extract Common Metadata in the actions drop-down-box while creating the rule.
I don't believe it's possible without the importing code explicitly turning off the default behaviour of the "cm:auditable" policy, and I suspect the WebDAV driver doesn't do this (since it has no way of knowing whether that's appropriate or not - there are cases where forcing the creation and modification dates to today is the correct thing to do).
This behaviour is discussed in some detail here - it might be worth evaluating whether the bulk filesystem import tool is a more appropriate way to import the content into Alfresco, particularly since it can preserve the creation and modification dates if you tell it to (i.e. by specifying the values of those properties).