First off I realize that this question has been answered. I found that the top hit provided little explanation of the solution. Also my situation is different in the sense that I have no package manager and no root privileges. I hope this questions enables other users like me to be able to install R.
So here is my problem. I am installing R version 3.3.2 and it is giving me an error during configuration:
configure: error: --with-readline=yes (default) and headers/libs are not available
I read online about readlines and how it should be downloaded readline library version 7.0 from the GNU website and installed it in my own directory using
./configure --prefix=/home/readlines; make; make install
Now I just can't get R to recongize where the libraries are. I tried the following:
export LD_LIBRARY_PATH="/home/readlines:$LD_LIBRARY_PATH"
./configure --prefix=/home/R-3.3.2/ CPPFLAGS="-I/home/readlines/include/" LDFLAGS="-L/home/readlines/lib"
I also tried setting CFLAGS to no avail. Can anyone help me figure out how to tell R where my readlines headers are? I'm on CentOS 7
Related
after updating my R version to 3.6.1 version - the rGrain and rGraphviz packages do not work. First the error was suggesting that the packages are not writable. However after updating some libraries and trying to source it outside from the BiocManager right now the error appears saying that the compilation fails. Does anybody know how to fix it?
I have already tried multiple options like sourcing it outside and directly from BiocManager and other sources however with no results.
I would appreciate any type of help suggesting how to fix or just install packages gRain and Rgraphviz.
Not writable is biocmanager being poorly programmed and somehow wanting to install some secondary packages into the main R folder in program files, rather than the usual R\win-library\ in documents.
You can workaround that by launching the R console or Studio with administrator privileges when installing/updating.
I have a general question about how to effectively load any kind of external package into R. I have found that many sources detailing this information are simply insufficient, but I will leave out mentioning those respective URLs. I have successfully loaded external packages into R before, but I am having difficulties loading the fgui package.
In my specific case, I cannot load the library fgui into R Studio. First I download directly from CRAN with the command:
install.packages("fgui", lib="~/Documents/R_dir")
This works fine for me. My working directory is set to ~/Documents/R_dir
The next command I use is:
library("fgui", lib.loc="~/Documents/R_dir")
The error I get is:
Error : .onLoad failed in loadNamespace() for 'tcltk', details:
call: dyn.load(file, DLLpath = DLLpath, ...)
error: unable to load shared object '/Library/Frameworks/R.framework/Versions/3.1/Resources/library/tcltk/libs/tcltk.so':
dlopen(/Library/Frameworks/R.framework/Versions/3.1/Resources/library/tcltk/libs/tcltk.so, 10): Library not loaded: /opt/X11/lib/libX11.6.dylib
Referenced from: /Library/Frameworks/R.framework/Versions/3.1/Resources/library/tcltk/libs/tcltk.so
Reason: image not found
Error: package or namespace load failed for ‘fgui’
I have examined the thread "Error when trying to load library(ggplot2) in R" but it did not answer my question.
Please help me with any suggestions to get the package fgui to work properly in R Studio and feel free to address the more general issue of effectively loading external packages into R.
tcltk is not a typical package. It's probably already installed on your system and it cannot be installed using the usual install.packages procedure because it is not on CRAN (just like the base packages that come with R, like stats, etc.). Also, tcltk2 is not the same as tcltk; that is a package that expands upon (and depends on) the functionality of tcltk.
So, start with this:
> capabilities("tcltk")
tcltk
TRUE
If that comes back FALSE it means that your R was not built with tcltk support. You don't say what OS you're using, so it's a little bit difficult to help you.
That said, if you're on Linux, you need to rebuild R with tcltk support. This should be relatively straightforward. Basically, make sure Tcl and tk are available on your system in a standard location (something like sudo apt-get install tcl8.5-dev tk8.5-dev) and then rebuild R per usual procedures.
If you're on Mac OS, you're encountering the same error that John Fox describes here in relation to Rcmdr. In short, it's probably one of two things:
A file permission issue related to the directory where you have Tcl installed. To quote Fox: "You can verify the source of this problem by issuing the following command at the R command prompt:
system("ls -ld /usr/local /usr/local/lib /usr/local/lib/libtcl*")
# ls: /usr/local/lib: Permission denied
# ls: /usr/local/lib/libtcl*: Permission denied
# drwx------ 8 root wheel 272 Sep 24 10:21 /usr/local
If the output of the system command looks like the above, you should go to Terminal and do the following: sudo chmod -R a+rX /usr/local and enter your password to change directory permissions.
You have an out-dated version of X-Windows. Try running Mac OS Software Update.
It may also be solvable by creating a symbolic link as described in this answer.
This should never come up on Windows, unless you built R from source without tcl/tk support.
On Arch Linux, tk is a separate package from tcl and both need to be installed:
sudo pacman -S tcl tk
This is given that the output from capabilities("tcltk") with R is TRUE (which means your R is compiled with tcltk support as noted previously in the answers here, this should be the case if you installed it from the arch repos).
The official installation instructions for R say:
Note: the use of X11 (including tcltk) requires XQuartz to be
installed since it is no longer part of OS X. Always re-install
XQuartz when upgrading your OS X to a new major version.
So: Simply (re)install XQuartz if you want to use the tcltk package in R.
delete the X11 file on location : /opt
delete the X11 on application unitiltiy
reinstall X11 again
Problem solved...
For Mac-OS users:
I struggled with this problem recently and found that R-3.1.2 has a bug, which assumes that otool is installed when it is not.
R-3.0.0 (and later) ships with Tck/Tk 8.6.0, so you shouldn't need to install that.
Simply upgrading to a more recent version of R (3.4.2) fixed the problem for me.
I had the same issue and went down a rabbit hole before discovering a simple fix. If you install R from bianry it will include tcltk by default. Just run the installer with the default installation. You can get the .dmg here: https://cran.r-project.org/bin/macosx/
Easiest answer for Mac users:
1- Install tcl-tk using brew:
brew install tcl-tk
2- Run the following code:
ln -s /usr/local/Cellar/tcl-tk/$version/lib/libtcl8.6.dylib /usr/local/lib/libtcl8.6.dylib
ln -s /usr/local/Cellar/tcl-tk/$version/lib/libtk8.6.dylib /usr/local/lib/libtk8.6.dylib
Problem solved!
Does anyone have a link to clear instructions on how to install and configure the necessary latex packages to build R packages on a mac?
I have some scripts for building and checking R packages on a mac server. They seemed to work fine, but after upgrading to R 3.1.3, many of the packages started failing with
Error in texi2dvi(file = file, pdf = TRUE, clean = clean, quiet = quiet, :
Running 'texi2dvi' on 'networkVignette.tex' failed.
Messages:
sh: /usr/local/bin/texi2dvi: No such file or directory
Calls: <Anonymous> -> texi2pdf -> texi2dvi
Execution halted
I found a thread which seemed to suggest I need a more recent version texinfo (5.2) than what is installed by default. And apparently I've I've got the wrong version installed in the wrong location?
which texi2pdf
/sw/bin/texi2pdf
texi2pdf --version
texi2pdf (GNU Texinfo 5.1) 5234
(same version is reported when running system('texi2pdf --version') in R )
This thread gives a link to a texinfo 5.2 source collection:
http://r.789695.n4.nabble.com/R-CMD-build-looking-for-texi2dvi-in-the-wrong-place-R-devel-td4701706.html
But I'm not familiar with installing executable from a tar.gz file on a mac. The R mac help pages I found suggest installing MacTex, which I tried but that didn't seem to help.
** Update: ** additional discussion of related problems on R-SIG-mac mailing list:
https://groups.google.com/forum/#!topic/r-sig-mac/xjyuFdl5Ezk
Update:
Here is where I'm currently at:
I removed my /sw directory to uninstall fink and all of its packages (couldn't figure out how to upgrade it)
installed homebrew
brew install texinfo installs version 5.2 the package,
but generates the message This formula is keg-only, which means it was not symlinked into /usr/local and actually installs in in /usr/local/Cellar/texinfo/5.2/bin which means it is not on the path and R won't find it.
manually symlink each of the texi2pdf, texi2dvi , etc as vincent suggests (this is because R has the /usr/local/bin location as default in the tools::texi2dvi function?
edited the /etc/paths file on the system to add /usr/local/bin so that finds the brew installed 5.2 version before it finds it before the osx system supplied version 4.6 version. This may not be necessary because R has it hardcoded?
All of this gets rid of the "can't find texi* errors", and gives me a bunch of latex errors (which I don't see on unix and windows builds) so I'm still kind of stuck.
This seems very hackish, so there must be a cleaner way? But it sounds like stuff with tex and mac is very sketchy at the moment? https://tex.stackexchange.com/questions/208181/why-did-my-tex-related-gui-program-stop-working-in-mac-os-x-yosemite
This worked for me on Mavericks and on Yosemite:
ln -s /usr/bin/texi2dvi /usr/local/bin/texi2dvi
ln -s /usr/bin/texi2pdf /usr/local/bin/texi2pdf
On my Lion system both the command which texi2pdf at a Terminal/bash prompt and from a R.app GUI prompt tell me that I have that program in:
system("which texi2pdf")
#/opt/local/bin/texi2pdf
That is a location typical for MacPorts installation. I think the /usr/local/bin/ is what the binary R version "expects". I'm not really that UNIX savvy, but I think the you can modify the PATH environment variable so that R will be able to find your installation. (Whether it will be compatible I cannot say since so much detail is missing from your question.) My Tex installation is MacTex, which I got from https://www.tug.org/mactex/. I admit to having a cobbled-together system:
system("echo $PATH")
# /opt/local/bin:/opt/local/sbin:/sw/bin:/sw/sbin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/texbin:/usr/X11/bin:/usr/X11R6/bin
That gets set at the beginning of an R session because this is the first line in my .Rprofile-(invisible)file:
Sys.setenv(PATH="/opt/local/bin:/opt/local/sbin:/sw/bin:/sw/sbin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/texbin:/usr/X11/bin:/usr/X11R6/bin")
I think /sw/bin/ installations signify a fink install, which I have had very little success with. Simon Urbanek suggests not using any package installers, but then leaves the rest of us UNIX weenies very little in the way of worked examples of how to install that various external packages that underpin the many interesting and oh-so-useful R packages. So I feel your pain, but I'm not running for President.
So I suppose you could try this at your R console before again attempting one of the earlier unsuccessful installs:
Sys.setenv(PATH=paste( Sys.getenv()$PATH, # should be the character string of the $PATH
"/sw/bin/", sep=":")
)
Wish I could offer guarantees, but if it breaks the only guarantee is that you get to keep all the pieces.
I ran into a similar error message using Mavericks 10.9.5 (factory configured) and R 3.1.
It turns out that I didn't have pdfLaTex. I went to this page: http://tug.org/mactex/ and downloaded the MacTex installation package. It's big (>2GB) but after I installed it, my R package build problems went away.
Hope this might be helpful to anyone else who runs into this error message.
I'm pretty new to R so apologies for a stupid question. I'm trying to get rcpp running but I'm stuck in an endless loop of R asking me to re-install RTools.
I broadly followed the code in this blog post, although first time off I installed everything by hand & I've subsequently re-installed everything a few times over. I'm running Windows 7, R version 3.1.2, R Studio Version 0.98.1091 (not that this should matter much) and RTools 3.1.
An edited highlight of what my console looks like is as follows:
> library(installr)
Welcome to installr version 0.15.3...
> install.Rtools()
Loading required package: devtools
No need to install Rtools - You've got the relevant version of Rtools installed
> find_rtools()
[1] TRUE
> library(Rcpp)
> evalCpp("1+1")
Error in sourceCpp(code = code, env = env, rebuild = rebuild, showOutput = showOutput, :
Error 65535 occurred building shared library.
At which point a dialog box pops up saying:
Install Build Tools
Compiling C/C++ code for R requires installation of additional build tools.
Do you want to install the additional tools now?
And then I get directed to download and re-install RTools 3.1 from cran all over again.
I've seen that this can be an issue with the PATH variable but I've tried various things including:
Nothing (extra) in the PATH variable
Including both references to R (C:\Program Files\R\R-3.1.2\bin\x64) and RTools (C:\RBuildTools\3.1\bin;C:\RBuildTools\3.1\gcc-4.6.3\bin;) in the PATH. Once with RTools first, once with R first
Including just a reference to RTools in the PATH as the initial install file directed me to do.
Any ideas on things to try would be gratefully accepted!
EDIT
Following Dirk's comment it looks like I might have a problem with how RTools is installed. I've followed the instructions from several blogs / tutorials on how to install RTools; all to no avail (yet!)
This GitHub page gives some instructions on how install and check that the installation has worked. I've followed all the checks (see below for copy of the console) and it looks like I have a working install of RTools, but when I try to run evalCPP() again I get the same error as before directing me to install RTools.
> Sys.getenv('PATH')
[1] "C:\\Program Files\\R\\R-3.1.2\\bin\\x64;C:\\RTools\\bin;C:\\RTools\\gcc-4.6.3\\bin;C:\\WINDOWS\\system32;C:\\WINDOWS;C:\\WINDOWS\\System32\\Wbem;C:\\WINDOWS\\System32\\WindowsPowerShell\\v1.0\\;C:\\Program Files (x86)\\Enterprise Vault\\EVClient\\;C:\\Program Files (x86)\\Microsoft SQL Server\\100\\Tools\\Binn\\VSShell\\Common7\\IDE\\;C:\\Program Files (x86)\\Microsoft SQL Server\\100\\Tools\\Binn\\;C:\\Program Files\\Microsoft SQL Server\\100\\Tools\\Binn\\;C:\\Program Files (x86)\\Microsoft SQL Server\\100\\DTS\\Binn\\;C:\\Program Files (x86)\\Microsoft Visual Studio 9.0\\Common7\\IDE\\PrivateAssemblies\\;C:\\Program Files\\Microsoft SQL Server\\110\\Tools\\Binn\\;C:\\Program Files\\Microsoft\\Web Platform Installer\\;C:\\Program Files (x86)\\Microsoft SDKs\\TypeScript\\1.0\\;C:\\Program Files\\Microsoft SQL Server\\100\\DTS\\Binn\\"
Warning message:
printing of extremely long output is truncated
> system('g++ -v')
Using built-in specs.
COLLECT_GCC=C:\RTools\GCC-46~1.3\bin\G__~1.EXE
COLLECT_LTO_WRAPPER=c:/rtools/gcc-46~1.3/bin/../libexec/gcc/i686-w64-mingw32/4.6.3/lto-wrapper.exe
Target: i686-w64-mingw32
Configured with: /data/gannet/ripley/Sources/mingw-test3/src/gcc/configure --host=i686-w64-mingw32 --build=x86_64-linux-gnu --target=i686-w64-mingw32 --with-sysroot=/data/gannet/ripley/Sources/mingw-test3/mingw32mingw32/mingw32 --prefix=/data/gannet/ripley/Sources/mingw-test3/mingw32mingw32/mingw32 --with-gmp=/data/gannet/ripley/Sources/mingw-test3/mingw32mingw32/prereq_install --with-mpfr=/data/gannet/ripley/Sources/mingw-test3/mingw32mingw32/prereq_install --with-mpc=/data/gannet/ripley/Sources/mingw-test3/mingw32mingw32/prereq_install --disable-shared --enable-static --enable-targets=all --enable-languages=c,c++,fortran --enable-libgomp --enable-sjlj-exceptions --enable-fully-dynamic-string --disable-nls --disable-werror --enable-checking=release --disable-win32-registry --disable-rpath --disable-werror CFLAGS='-O2 -mtune=core2 -fomit-frame-pointer' LDFLAGS=
Thread model: win32
gcc version 4.6.3 20111208 (prerelease) (GCC)
> system('where make')
C:\Rtools\bin\make.exe
I've also had a look at Appendix D of R Installation and Admin. I can't see anything in here I've not already tried except for section D.4 which implies I might need to rebuild rcpp from source using my installed RTools. I don't have time to do this right away but will give it a try unless people say this route is not worth my time.
EDIT v2
So I tried building rcpp from source ... and that didn't work either. I downloaded both the package source and windows binaries from the CRAN Rcpp package page. In the R console I now get:
> install.packages(pkgs = "C:/Rcpp_0.11.4.tar.gz", repos = NULL, contriburl = NULL, type = "source", verbose = TRUE)
Installing package into ‘C:/Users/james.macadie/Documents/R/win-library/3.1’
(as ‘lib’ is unspecified)
system (cmd0): C:/PROGRA~1/R/R-31~1.2/bin/x64/R CMD INSTALL
Warning in install.packages :
package ‘C:/Rcpp_0.11.4.tar.gz’ is not available (for R version 3.1.2)
I guess my active questions now boil down to:
Reading the whole of the post above can anyone tell me how to fix things so it just works? Or, failing that...
What tests can I run to check I really do have Rtools installed correctly? Everything I have found on the internet suggests I do: system('where make') etc. However, the evidence of being unable to run evalCpp or other rccp functions suggests I don't.
What am I doing wrong when building from source? Should I try the command line option?
EDIT v3
Running evalCpp with showOutput= TRUE and verbose = TRUE I think I've tracked the error back to R CMD SHLIB not working. I followed this blog, which shows how to work with the command line R directly. However when I get to the line R CMD SHLIB sequence_examples.c the execution just skips straight to the next command line without doing anything, generating any files in the directory or throwing any errors. I tried running the --help options at the command line but get the same sort of error:
C:\Users\james.macadie> R --help
Or: R CMD command args
where 'command' is one of:
INSTALL Install add-on packages
REMOVE Remove add-on packages
SHLIB Make a DLL for use with dynload
BATCH Run R in batch mode
build Build add-on packages
check Check add-on packages
Rprof Post process R profiling files
Rdconv Convert Rd format to various other formats
Rdiff difference R output files
Rd2pdf Convert Rd format to PDF
Rd2txt Convert Rd format to pretty text
Stangle Extract S/R code from vignette
Sweave Process vignette documentation
config Obtain configuration information about R
open Open a file via Windows file associations
texify Process a latex file
Use
R CMD command --help
for usage information for each command.
C:\Users\james.macadie> R CMD SHLIB --help
C:\Users\james.macadie>
N.B. for people reading the earlier code samples higher up this post I have changed a few things since those code snapshots:
I've installed R directly into C:\R. It used to be in C:\Program Files\R\ but as has been suggested file paths with spaces in can cause problems
I'm referencing Rtools under C:\Rtools\ and not C:\RBuildTools\
Thanks for any suggestions, as ever
Had the same endless loop issue when trying to install Twitter's BreakoutDetection (which is also written in cpp)
fixed by executing the following
Sys.setenv(PATH="%PATH%;C:/Rtools/gcc-4.6.3/bin;c:/Rtools/bin")
and then answering "no" when presented with the following prompt:
"Install Build Tools Compiling C/C++ code for R requires installation of additional build tools. Do you want to install the additional tools now?"
Didn't try these actions independently so not sure if either on their own would have fixed the issue
I found that ensuring all of these were in my path fixed it. I did this with RStudio closed; I didn't reboot after.
C:\Program Files\R\R-3.1.3\bin\x64
C:\Program Files\R\R-3.1.3\bin
C:\RBuildTools\3.2\bin
C:\RBuildTools\3.2\gcc-4.6.3\bin64
C:\RBuildTools\3.2\gcc-4.6.3\bin
C:\RBuildTools\3.2\gcc-4.6.3\i686-w64-mingw32\bin
These are on my Win7-64bit computer. YMMV, and I'm mostly posting this to ensure others see it if they are having the same issue.
In the end it was something a bit left-field. Inspired by the following post, I had a look at the ComSpec environment variable. Not quite sure how, but I had it set to "cmd.exe".
Removing the double quotes, so it said cmd.exe, and then rebooting fixed everything.
Thanks to all who've tried to help.
I experienced the same problem, I fixed this problem by adding Rtools dir into env variables:
Sys.setenv(BINPREF = "C:/Rtools/mingw_$(WIN)/bin/")
All: Apologies in advance for what I hope is an easy question. It's been many years since I've worked in a Unix(-like) environment...
I'm trying to install RApache on a web server running the RHEL5 64-bit OS. I've successfully installed Apache and confirmed it works. I've also successfully installed R (R-2.13.0) with shared library. I've confirmed that libBlas.so and libR.so are installed; location: /R/R-2.13.0/lib
However, when I try to configure RApache ( sudo ./configure --with-apache2-apxs=/usr/local/apache2/bin/ --with-R=/R/R-2.13.0/) I get the following error:
R was not built as a shared
library Either build it with one,
or use another install of R
configure: error: aborting!
I've reinstalled R twice now and have confirmed in libtool that it says:
# Whether or not to build shared
libraries. build_libtool_libs=yes
Finally, I've searched high and low for some path or flag I need to set without success. Any help would be greatly appreciated.
Thanks,
Ron
You need to compile R with the appropriate flags. At the configure stage you need to include --enable-R-shlib so that R is built as a shared library.
You may need to further consult appendix B1 of http://cran.r-project.org/doc/manuals/R-admin.pdf which describes further issues.