Like in the topic, I'd like to run shiny app with parameters. I need to specify the database file's path from which I will grab the data. The problem is that the file changes sometimes thus I have to modify the file.path every time.
This is the command I use when running application from terminal
R -e "shiny::runApp('../Shiny_visualization')"
I tried
R -e "shiny::runApp('../Shiny_visualization')" --args 'db_path' yet I got an error.
Related
I am trying to run a Java application (beagle2vcf) from R.
I tried with system() but no runs are performed only the help of the function is returned in the R console. But when I copy the same command to my cmd console the run is performed.
Then I try with system2() and only output in the console is created, but I need a file on my filesystem.
I am using the stdout parameter, but this does not seem to work.
Perhaps the fact that the Java application uses ">output" to generate files plays a role? Other Java applications that do not have this syntax to output the results run fine with system().
Example of command using system():
"java -jar beagle2vcf.jar 1 OneChrom.markers beagleTrain.bgl NA Chrom1Train.vcf"
Example system2 call:
system2(command="java",args=c("-jar","beagle2vcf.jar", j,"OneChrom.markers","beagleTrain.bgl","NA"),stdout=outnameTrainVCF,invisible=TRUE)
I run R3.5.0 on a windows 10 machine
The output should be a vcf file on my file system.
I want to launch Rcmdr as a command from bash (or any unix shell), perhaps as an alias. R accepts the CMD argument and I could also pipe a script in with <. I would like the R console to stay open, and an interactive RCommander session to be started (Rcmdr is a popular GUI for R, for any newbies reading along, and it seems that you start up R, type library(Rcmdr) and then Commander() to start it up).
I am aware of how to add Rcmdr to my profile, and it appears to always start up if I include library(Rcmdr) in my .Rprofile, on my Linux workstation.
If I pipe my input in with < then this script works up to the point where it says that Commander GUI is launched only in interactive sessions:
library(Rcmdr);
Commander();
However if I run R CMD BATCH ./rcommander.r it just starts up and shuts down immediately, probably giving me some warning about interactive sessions that I didn't see, because CMD BATCH puts R into non-interactive mode and is thus useless for the purpose of "injecting" Rcmdr into an interactive R session.
It appears impossible to "source a file on the command line but run interactively" in R. It also appears that there are command line options to ignore the global and the user profile, but not to specify a custom profile like R --profile-custom ./.Rprofile2
Either I would like to specify a profile that means "Right now I want to start up and use RCmdr" and still be able to run R without it sometimes.
Working on an Ubuntu machine here, I was able to use the advice provided by Dirk in this mailing list post:
nathan#nathan-laptop:~/tmp$ cat rcommander.r
#!/bin/bash
r -lRcmdr -e'while(TRUE) Commander();'
nathan#nathan-laptop:~/tmp$ cat rcommander2.r
#!/bin/bash
Rscript --default-packages=Rcmdr -e 'while(TRUE) Commander();'
The first script uses Dirk's littler package, available on CRAN, and the second uses the standard Rscript executable. As noted, you can kill the process with ctrl + c from your terminal.
Hej,
When I try to call QIIME with a system call from R, i.e
system2("macqiime")
R stops responding. It's no problem with other command line programs though.
can certain programs not be called from R via system2() ?
MacQIIME version:
MacQIIME 1.8.0-20140103
Sourcing MacQIIME environment variables...
This is the same as a normal terminal shell, except your default
python is DIFFERENT (/macqiime/bin/python) and there are other new
QIIME-related things in your PATH.
(note that I am primarily interested to call QIIME from R Markdown with engine = "sh" which fails, too. But I strongly suspect the problems are related)
In my experience, when you call Qiime from unix command line, it usually creates a virtual shell of it`s own to run its commands which is different from regular system commands like ls or mv. I suspect you may not be able to run Qiime from within R unless you emulate that same shell or configuration Qiime requires. I tried to run it from a python script and was not successful.
I have R script within a plain text file named "TestFile.R".
I am running RStudio. I want to use the Windows console (cmd.exe) to pipe "TestFile.R" directly into the "R Script" editor of RStudio, without launching a new thread of RStudio.
This command in the console does exactly what I want:
rstudio -f TestFile.R
The contents of "TestFile.R" go straight into the RScript editor of the existing thread of RStudio.
It assumes, however, that "TestFile.R" is in the "bin" folder of RStudio, and also that
cmd.exe is running within that folder.
But I want to be able to do this from anywhere on my computer, using a console command like:
pathToRstudio\rstudio -f pathToTestFile\TestFile.R
To give an example, on my computer, this command fails:
C:\"Statistical packages"\RStudio\bin\rstudio -f E:\"my project"\TestFile.R
By trial and error, I discovered these solutions:
1/ omit the "C:\" part
2/ avoid quotation marks in the pathToTestFile.
So this console command works fine:
"Statistical packages"\RStudio\bin\rstudio -f E:\myproject\TestFile.R
Of course, I still am very restricted ; my default folder has to be "C:\", and I cannot have spaces in the path to TestFile.R, even though spaces within the Rstudio path are apparently OK !?
Could somebody please explain to me how to write this command in a way that is completely generic with regard to path specification?
I want to be able to run it from any folder, and have TestFile.R in any other folder. I do not want hassles about folder names containing spaces.
I have created a batch file to launch R scripts in Rterm.exe. This works well for regular weekly tasks. The < PBWeeklyMeetingScriptV3.R > is the R script run by Rterm.
set R_TERM="C:\Program Files\R\R-2.14.0\bin\x64\Rterm.exe"
%R_TERM% --slave --no-restore --no-save --args 20120401 20110403 01-apr-12 03-apr-11 < PBWeeklyMeetingScriptV3.R > PBWeeklyMeetingScriptV3.batch 2> error.txt
I've tried to modify this to launch the R GUI instead of the background process as I'd like to inspect and potentially manipulate and inspect the data.
If I change my batch file to:
set R_TERM="C:\Program Files\R\R-2.14.0\bin\x64\Rgui.exe"
the batch file will launch the R GUI but doesn't start the script. Is there a way to launch the script too?
Alternatively is there a way to save/load the work space image to access the variables that are created in the script?
You can save and load workspaces by using save.image() and load(). I do this all the time when scripting to pass data sets between two separate script files, tied together using Python or bash. At the end of each R script, just add:
save.image("Your_image_name.RData")
The image will be the workspace that existed whenever the command was run (so, if it's the last command in the file, it's the workspace right before the exist of the file). We also use this at my job to create "snapshots" of input and output data, so we can reproduce the research later. (We use a simple naming convention to get the time of run, and then label the files with that).
Not sure about launching and then running the GUI with specific scripts in it; I don't think that's a feature you'll find in R, simply because the whole point of running a batch file is usually to avoid the GUI. But hopefully, you can just save the image to disk, and then look at it or pass it to other programs as needed. Hope that helps!