the way I understand extension is that , it's a structure where you can keep attributes which are not listed in the fhir specification. We are also supposed to explain that extension via 'URL' and 'System' property.
We can create pages in our fhir server using ASP.NET MVC. Should we follow any format / guide lines about that page design ? Also , do we have any tool which will create the page and publish it ?
To create new StructureDefinitions for both extensions and constraints, you could take a look at the Forge tool. This tool can publish your definition to your own server, or to the Simplifier.net registry, which will display your definitions nicely.
Extensions are defined using the StructureDefinition resource. Ideally, the cannonical URL for the extension should resolve to the StructureDefinition that defines the extension, though you can also meet the requirement by sharing the StructureDefinition with potential consumers of instances that reference that extension or by posting the StructureDefinition instance to a registry that instance consumers will be familiar with. So there aren't any pages to design per se . . .
Related
I am novices to the field of Identity and Access management.
Till now I know, Sail point has provided the some direct connectors to integrate the known systems like LDAP, HR systems, OIM, Databases..
And sailpoint also provided the support for disconnected applications with the use of Custom connectors.
Here, My question is how to develop a custom connector..?
I do not have jar file provided by sailpoint which contain "AbstractConnector" class.
So that I can write my own class and develop..?
I also so not understand, what to do with that class?(if i have a jar)
How sailpoint will refer to that class..
Do we need to deploy that class to somewhere...
Here I am expecting the complete flow to develop and deploy the custom connector..
If anyone is working please help..
If you unzip your identityiq.war, you'll find a JAR file called WEB-INF/lib/connector-bundle.jar. This is the JAR where you'll find AbstractConnector. Once you've written your connector code, you will need to compile it and bundle it into a JAR file, which you will place into WEB-INF/lib.
Finally, you will need to update the ConnectorRegistry object (under Configuration on the debug screen) to reference the new class, which will make it available as an Application type. If it has custom connection parameters (as most do), you will also need an xhtml page that will be embedded into the Sailpoint UI to prompt the user configuring the Application.
If you have Compass access, they have a whitepaper called Custom Connectors that you will find helpful.
All that said, I encourage you to try to find a way to use an out-of-box connector if possible.
Most of the times it will be better if you use the DelimitedFile connector, you can import a CSV of identity data, and make it work within Sailpoint's workflow. You will be able to map fields, correlate accounts and create multi-valued group memberships rapidly. Of course, this means that Sailpoint will not be connected directly to the application, and you will have to develop a workflow to extract the identities and upload them. But at least, you can integrate without going the Custom Connector way.
i got sabre wsdl and tpfc connector services from sabre. also got their wsdl proxy class samples. Now these things are old, i mean their sample code is using .net framework 2.0, and proxy classes. Now its an old APPROACH, while someone suggested me app web reference which will create a .discomap , but i dont see any good reference tutorial.
So what i need to know is , a step by step guide or simple points:
1. how to add wsdl as .discomap web reference
2. how to use that added discomap and how it differs from proxy class.
recently i done some tinkering myself and added a webreference, but i still have no idea what steps i have used to add this.
thanks
To add a reference of one of Sabre's webservices you need to right click on Service Reference in your solution explorer and choose Add Service Reference. In the Add Service Reference window displayed, click on Advance locatetd at the low left side. This will display the Service Reference Settings window, click on Add Web Reference at the low left side of the window. In the URL field of the Add Web Reference window add the path where you downloaded the service files and wsdl or the online wsdl url.
Hope this information is helpful.
We are creating ReST Web Services using ASP.NET and OpenRasta.
Is there any tool that can could help us:
create WADL file
or/and create human readable API documentation similar which decribed resources/HTTP
methods supported for each resource, etc ?
Looks like REST Describe & Compile should do the trick.
On the WADL developer site Marc Hadley
maintains a command line tool named
WADL2Java. The ambitious goal of REST
Describe & Compile is to provide sort
of WADL2Anything. So what REST
Describe & Compile does is that it:
Generates new WADL files in a completely interactive way.
Lets you upload and edit existing WADL files.
Allows you to compile WADL files to source code in various programming
languages.
For OpenRasta, it'd be possible to use a UriDecorator to have help-like URIs defined for your resources (such as /myResource$help). You can then rewrite the URI before parsing to something yo can document easily, parse teh uri, find the resource type, and rewrite to /help/{resourcetype}
From there you register a resource for your help system:
ResourceSpace.Has.ResourcesOfType()
.AtUri("/help/{resourceType}")
.HandledBy()
.RenderedByXxx()
Then you can create your handler to return the documentation about a resource. You could for example use the IOperationCreator service to know which http methodds are available and with what input arguments, use the ICodecRepository to see what media types may be accepted as input, and potentially what a media type serialization would look like by calling the codec and generating an html friendly view of it.
That's definitly an area we're going to work on for the next version.
I'm developing a web application (ASP.NET 3.5) that will consume a number of web services. I have created a separate dll-project for each web service: these projects contains the service reference and client code.
However, the calling website MUST have the <system.serviceModel> information (the <bindings> and <client> nodes) in it's web.config, even though this information is also in the dll's app.config file! I have tried copying the serviceclass.dll.config over to the bin directory of the website, but this didn't help.
Is there any way to centralize the configuration of a WCF client?
I've only limited WCF experience, all with BasicHTTP bindings. But I'm allergic to WCF's xml files and have managed to avoid them thus far. I don't recomend this generally but I put the configuration details in my apps existing configuration store and then apply them programatically. E.g. With a Web service proxy I use the constructor for the Client that takes 'bindings'and 'endpoint' and programatically apply the settings to the bindings & endpoint.
A more elegent solution appears to be descibed here: Reading WCF Configuration from a Custom Location, but I haven't tried it yet.
From my experience, library projects never read app.config.
So you can really delete the file because it is not used. The library's host configuration is read instead, so that is the only place the endpoint and binding configuration should be.
It's possible to forgo xml config and build up the Binding and Endpoint classes associated with the service in the constructor or a custom "Service Factory". iDesign has some good information on this:
http://www.idesign.net/idesign/DesktopDefault.aspx?tabindex=5&tabid=11
(See In Proc Factory)
In their approach, you set attributes on your services to specify at a high level how they should work (ie [Internet], [Intranet], [BusinessToBusiness]), and the service factory configures the service according to best practices for each scenario. Their book describes building this sort of service:
http://www.amazon.com/Programming-WCF-Services-Juval-Lowy/dp/0596526997
If you just want to share configuration XML config, maybe use the configSource attribute to specify a path for configuration: http://weblogs.asp.net/cibrax/archive/2007/07/24/configsource-attribute-on-system-servicemodel-section.aspx
Remember that a configuration file is is read by an executable that has an entry point. A library dll does not have an entry point so it is not the assembly that will read it. The executing assembly must have a configuration file to read.
If you would like to centralize your web configs then I would suggest you look into nesting them in IIS with virtual directories. This will allow you to use the configuration inheritance to centralize whatever you need.
There are 2 options.
Option 1. Working with channels.
If you are working with channels directly, .NET 4.0 and .NET 4.5 has the ConfigurationChannelFactory. The example on MSDN looks like this:
ExeConfigurationFileMap fileMap = new ExeConfigurationFileMap();
fileMap.ExeConfigFilename = "Test.config";
Configuration newConfiguration = ConfigurationManager.OpenMappedExeConfiguration(
fileMap,
ConfigurationUserLevel.None);
ConfigurationChannelFactory<ICalculatorChannel> factory1 =
new ConfigurationChannelFactory<ICalculatorChannel>(
"endpoint1",
newConfiguration,
new EndpointAddress("http://localhost:8000/servicemodelsamples/service"));
ICalculatorChannel client1 = factory1.CreateChannel();
As pointed out by Langdon, you can use the endpoint address from the configuration file by simply passing in null, like this:
var factory1 = new ConfigurationChannelFactory<ICalculatorChannel>(
"endpoint1",
newConfiguration,
null);
ICalculatorChannel client1 = factory1.CreateChannel();
This is discussed in the MSDN documentation.
Option 2. Working with proxies.
If you're working with code-generated proxies, you can read the config file and load a ServiceModelSectionGroup. There is a bit more work involved than simply using the ConfigurationChannelFactory but at least you can continue using the generated proxy (that under the hood uses a ChannelFactory and manages the IChannelFactory for you.
Pablo Cibraro shows a nice example of this here: Getting WCF Bindings and Behaviors from any config source
First of all class libraries (DLLs) do not have their own configuration, however they can read the configuration of their host (Web/Executable etc.). That being said, I still maintain an app.config file on the library projects as a template and easy reference.
As far as the service configuration itself is concerned, WCF configuration can make somebody easily pull their hair out. It is an over-engineered over-complicated piece. The goal of your applications should be to depend least on the configuration, while maintaining flexibility of deployment scenarios your product is going to come across.
In FlexBuilder 3, there are two items under the 'Data' menu to import and manage web services. After importing a webservice, I can update it with the manage option. However, the webservices seems to disappear after they are imported. The manager does however recognize that a certain WSDL URL was imported and refuses to do anything with it.
How does the manager know this, and how can I make it refresh a certain WSDL URL?
In your src folder of the flexbuilder project you should see the generated classes. For instance, if you use the manager to generate the proxy classes for www.example.com you should see the folders /com/example with the generated proxy classes inside.
To consume these webservices in ActionScript use the statement:
"import com.example.*;"
To consume the webservice in mxml include the .as file using:
<mx:Script source="yourscriptname.as"/>
To refresh the generated proxy classes, consuming the latest WSDL, simply open the manager and select "update".
Also, I found this article very useful for consuming web services.
I hope that helps, the question was kind of vague about the problem.