I have been looking for this for a while now. Still not sure if Envoy and Nginx does all the TLS stuff for a web-gRPC client.
In my case, my Nginx config works well with gRPC client and server. However, it is not working for web-gRPC client.
Nginx is no longer being actively supported for grpc-web. The default proxy for grpc-web is Envoy. You should be able to set up TLS by setting some config with the envoy.yaml file. In particularly, look under the 'tls_context' section.
As part of my job,
I need to intercept the communication between a native windows application to a web server.
My connection to the environment is through an SSL-VPN.
The application (.exe) is installed on my PC and is communicating in HTTPS with the web server over port 1912.
Usually I use Burp proxy in order to intercept the communication between a browser and a server (configuring the proxy through the browser config). Yet,
In this implementation (native windows application) I cannot figure out how to route the traffic to a proxy.
Is there any specific proxy or configuration which I can use in order to that and use Burp (because it is a web proxy.. I need to mess with HTTP requests)?
First thing you have to understand is whether this native application is programmed to use proxy. If it can use proxy, it could obtain proxy information from the Windows system or you might need to configure just for the application inside the application.
Other possibility it to use the default gateway, and redirect requests with HTTP response 3XX to your proxy. It might work depending on your native application. The default gateway might just act as a proxy.
I suppose here you are not talking about reverse proxy and forward proxy caching (https://docs.trafficserver.apache.org/en/4.2.x/admin/reverse-proxy-http-redirects.en.html)
I am trying to setup a reverse proxy using IBM HTTP server and what I want to do is that user will hit a HTTP url to my reverse proxy server that will forward request internally to HTTPs server.
HTTP Address <--> Reverse Proxy (IBM HTTP Server) <--> HTTPS server (https://example.com)
In my configuration I have enabled mod_proxy & mod_proxy_http and configured below ProxyPass
Proxypass / https://example.com
But I am unable to configure it. I am getting error:
proxy: HTTPS: failed to enable SSL support for example.com
Anybody help what I might be doing wrong. I have also already loaded below modules:
LoadModule ibm_ssl_module modules/mod_ibm_ssl.so
Thanks
You need to specify a KeyFile and SSLProxyEngine ON.
Caveat:
However, generally IBM HTTP Server uses the WebSphere WebServer Plug-in as a websphere-specific HTTP reverse proxy plugin that doesn't share any of this configuration.
Most people use IBM HTTP Server because it's supported by IBM, but it's only supported by IBM when you use it in a way prescribed by a product that bundled it. That's rarely w/ mod_proxy.
I'm trying to put the WSO2 API Manager 1.8.0 behind an Apache proxy but it does not work.
I modified catalina-server.xml and set proxyPort but it still redirects met to port 9443. Other pages (like publish/) redirect to localhost.
I also set the correct hostname (using <HostName> and <MgtHostName>) in carbon.xml.
I suspect there are some other configuration settings which must be changed. Is there an overview available with everything you need to change in order to put the API Manager behind a reverse proxy?
in catalina-server.xml you can set proxy port for http and https. so for management console you need to add proxyport for https as follow
<Connector protocol="org.apache.coyote.http11.Http11NioProtocol"
port="9443"
**proxyPort="443"**
bindOnInit="false"
sslProtocol="TLS"
maxHttpHeaderSize="8192"
acceptorThreadCount="2"
check this post on how publisher app site.json and store app site.json should be modified for reverse proxy.there you can set host name(your proxy) and even message contextpath.(this post explains with nginx same applicable to apache)
http://sanjeewamalalgoda.blogspot.in/2014/12/configure-wso2-api-manager-with-reverse.html
The JVM allows proxy properties http.proxyHost and http.proxyPort for specifying a HTTP proxy server and https.proxyHost and https.proxyPort for specifying a HTTPS proxy server .
I was wondering whether there are any advantages of using a HTTPS proxy server compared to a HTTP proxy server ?
Is accessing a https url via a HTTPS proxy less cumbersome than accesing it from a HTTP proxy ?
HTTP proxy gets a plain-text request and [in most but not all cases] sends a different HTTP request to the remote server, then returns information to the client.
HTTPS proxy is a relayer, which receives special HTTP request (CONNECT verb) and builds an opaque tunnel to the destination server (which is not necessarily even an HTTPS server). Then the client sends SSL/TLS request to the server and they continue with SSL handshake and then with HTTPS (if requested).
As you see, these are two completely different proxy types with different behavior and different design goals. HTTPS proxy can't cache anything as it doesn't see the request sent to the server. With HTTPS proxy you have a channel to the server and the client receives and validates server's certificate (and optionally vice versa). HTTP proxy, on the other hand, sees and has control over the request it received from the client.
While HTTPS request can be sent via HTTP proxy, this is almost never done because in this scenario the proxy will validate server's certificate, but the client will be able to receive and validate only proxy's certificate, and as name in the proxy's certificate will not match the address the socket connected to, in most cases an alert will be given and SSL handshake won't succeed (I am not going into details of how to try to address this).
Finally, as HTTP proxy can look into the request, this invalidates the idea of security provided by HTTPS channel, so using HTTP proxy for HTTPS requests is normally done only for debugging purposes (again we omit cases of paranoid company security policies which require monitoring of all HtTPS traffic of company employees).
Addition: also read my answer on the similar topic here.
There are no pros or cons.
And there are no "HTTPS proxy" server.
You can tell the protocol handlers which proxy server to use for different protocols. This can be done for http, https, ftp and socks. Not more and not less.
I can't tell you if you should use a different proxy for https connections or not. It depends.
I can only explain the difference of an http and https request to a proxy.
Since the HTTP Proxy (or web proxy) understands HTTP (hence the name), the client can just send the request to the proxy server instead of the actual destenation.
This does not work for HTTPS.
This is because the proxy can't make the TLS handshake, which happens at first.
Therefore the client must send a CONNECT request to the proxy.
The proxy establishes a TCP connection and just sends the packages forth and back without touching them.
So the TLS handshake happens between the client and destenation.
The HTTP proxy server does not see everything and does not validate destenation servers certificate whatsoever.
There can be some confusion with this whole http, https, proxy thing.
It is possible to connect to a HTTP proxy with https.
In this case, the communication between the client and the proxy is encrypted.
There are also so called TLS terminating or interception proxy servers like Squid's SSL Peek and Splice or burp, which see everything.
But this should not work out of the box, because the proxy uses own certificates which are not signed by trusted CAs.
References
https://docs.oracle.com/javase/8/docs/technotes/guides/net/proxies.html
https://parsiya.net/blog/2016-07-28-thick-client-proxying---part-6-how-https-proxies-work/
http://dev.chromium.org/developers/design-documents/secure-web-proxy
https://www.rfc-editor.org/rfc/rfc2817#section-5
https://www.rfc-editor.org/rfc/rfc7231#section-4.3.6
If you mean connecting to a HTTP proxy server over TLS by saying HTTPS proxy, then
I was wondering whether there are any advantages of using a HTTPS
proxy server compared to a HTTP proxy server ?
The advantage is that your client's connection to proxy server is encrypted. E.g. A firewall can't not see which host you use CONNECT method connect to.
Is accessing a https url via a HTTPS proxy less cumbersome than
accesing it from a HTTP proxy ?
Everything is the same except that with HTTPS proxy, brower to proxy server connection is encrypted.
But you need to deploy a certificate on your proxy server, like how a https website does, and use a pac file to configure the brower to enable Connecting to a proxy over SSL.
For more details and a practical example, check my question and answer here HTTPs proxy server only works in SwitchOmega
Unfortunately, "HTTPS proxy" has two distinct meanings:
A proxy that can forward HTTPS traffic to the destination. This proxy itself is using an HTTP protocol to set up the forwarding.
In case the browser is trying to connect to a website using HTTPS, the browser will send a CONNECT request to the proxy, and the proxy will set up a TCP connection with the website and mirror all TCP traffic sent on the connection from the browser to the proxy onto the connection between the proxy and the website, and similarly mirror the response TCP packet payload from the webite to the connection with the browser. Hypothetically, the same mechanism using CONNECT could be used with HTTP traffic, but practically speaking browsers don't do that. For HTTP traffic, they send the actual HTTP request to the proxy, including the full path in the HTTP command (as well as setting the Host header): https://stackoverflow.com/a/38259076/10026
So, by this definition, HTTPS Proxy is a proxy that understands the CONNECT directive and can support HTTPS traffic going between the browser and the website.
A proxy that uses HTTPS protocol to secure client communication.
In this mode (sometimes referred to as "Secure Proxy"), the browser uses the proxy's own certificate to perform TLS handshake with the proxy, and then sends either HTTP or HTTPS traffic, (including CONNECT requests), on that connection as per (1). So, the connection between the browser and the proxy is always protected with a TLS key derived using the proxy's certificate, regardless of whether the traffic itself is encrypted with a key negotiated between the browser and the website. If HTTPS traffic is proxied via a secure proxy, it is double-encrypted on the connection between the browser and the proxy.
For example, the Proxy Switcher Chrome plugin has two separate settings to control each of these funtionalities:
As of 2022, the option to use a secure proxy is not available in MacOS and Windows manual proxy configuration UI. But a secure proxy may be specified in a PAC file used in automatic proxy configuration using the HTTPS proxy directive. It is up to the consuming application to support the HTTPS directive; most major browsers, except Safari, and many desktop apps support it.
NOTE: Things get a bit more complicated because some proxies that proxy HTTPS traffic don't simply forward TCP packet payload, as described in (1), but act as Intercepting Proxies. Using a spoofed website certificate, they effectively perform a Man-in-the-Middle attack (well, it's not necessarily an attack because it's expected behavior). Whereas the browser thinks it's using the website's certificate to set up a TLS tunnel with a website, it's actually using a spoofed certificate to set up TLS tunnel with the proxy, and the proxy sets up the TLS tunnel with the website. Then proxy has visibility into the HTTPS requests/responses. But all of that is completely orthogonal to whether the proxy is acting as a secure proxy as per (2).