I am using this code to retrieve data from a Thingspeak channel in a JSON format. I am using an ESP8266 along with an Arduino Nano 33 BLE. The Nono 33 BLE Arduino board is not compatible with Thingspeak library and it doesn’t support SoftwareSerial. Alternatively, I am using serial1 to communicate with the ESP8266 and REST API method to get the data from Thingspeak as it is shown in the code. However, I cannot get it to work. It is worth noting that Serial1.available() always gives zero even after adding delays.
I have used the same code to send data to the same Thingspeak channel and it works perfectly. I have no clue why it is not reading from the channel. I would really appreciate any help with this problem
Thanks in advance.
String AP ="xxxxxxxxxxx";
String PASS ="xxxxxxxxxxxxxx";
String PORT = "80";
String field = "Id";
int countTrueCommand;
int countTimeCommand;
boolean found = false;
String Data ="";
void setup() {
Serial.begin(9600);
Serial1.begin(115200);
sendCommand("AT",5,"OK",false);
Serial1.println("AT+UART_DEF=9600,8,1,0,0");
delay(1000);
Serial1.end();
Serial1.begin(9600);
ConnectToWifi();
}
void loop() {
String getData="GET https://api.thingspeak.com/channels/1335558/fields/1?api_key=7XFZKXEGOV5HY4TQ";
sendCommand("AT+CIPMUX=1",5,"OK",false);
sendCommand("AT+CIPSTART=4,\"TCP\",\""+ HOST +"\","+ PORT,15,"OK",false);
sendCommand("AT+CIPSEND=4," +String(getData.length()+4),4,">",false);
sendCommand(getData,20,"OK",true);
delay(1500);
countTrueCommand++;
sendCommand("AT+CIPCLOSE=0",5,"OK",false);
}
bool ConnectToWifi(){
for (int a=0; a<15; a++)
{
sendCommand("AT",5,"OK",false);
sendCommand("AT+CWMODE=1",5,"OK",false);
boolean isConnected = sendCommand("AT+CWJAP=\""+ AP +"\",\""+ PASS +"\"",20,"OK",false);
if(isConnected)
{
return true;
}
}
}
bool sendCommand(String command, int maxTime, char readReplay[],boolean isGetData) {
boolean result=false;
//Test Purpose
Serial.print(countTrueCommand);
Serial.print(". at command => ");
Serial.print(command);
Serial.print(" ");
while(countTimeCommand < (maxTime*1))
{
Serial1.println(command);
if(Serial1.find(readReplay))//ok
{
if(isGetData)
{
if(Serial1.find(readReplay))
{
Serial.println("Success : Request is taken from the server");
}
while(Serial1.available())
{
char character = Serial1.read()
Data.concat(character); /
if (character == '\n')
{
Serial.print("Received: ");
Serial.println(Data);
delay(50);
Data = "";
}
}
}
result = true;
break;
}
countTimeCommand++;
}
if(result == true)
{
Serial.println("Success");
countTrueCommand++;
countTimeCommand = 0;
}
if(result == false)
{
Serial.println("Fail");
countTrueCommand = 0;
countTimeCommand = 0;
}
found = false;
return result;
I am trying to write a Serial read function. That function will give me a data between '#' (start character) and '*' (end character). I tried to write it and it looks like it is kinda work but not perfectly. The problem is that:
I have two arduino. One of these send "MARCO" and other arduino read it. If the readed data is "MARCO" it is write to serial monitor "MARCOCORRECT" else it is write to serial monitor the readed data. Normally it must just write "MARCOCORRECT" because I only send "MARCO" but it don't. It writes something else too. I tried lower baud rate too but it is still same. How can I fix it?
Sender Code
#define BAUD_RATE 38400
void setup()
{
Serial.begin(BAUD_RATE);
}
String readed = "";
void loop()
{
String readed;
while (Serial.available() > 0)
{
readed += Serial.read();
}
Serial.println("#MARCO*");
}
Reader Code
#define BAUD_RATE 38400
#define MSG_START '#'
#define MSG_END '*'
String readed;
char readedChar;
bool msgStart = false;
String serialReadFunc()
{
readedChar = '0';
readed = "";
while (Serial.available() > 0 || msgStart)
{
if (readedChar == MSG_START)
{
msgStart = true;
}
readedChar = (char)Serial.read();
if (readedChar == MSG_END)
{
msgStart = false;
break;
}
if (msgStart)
{
readed += readedChar;
}
}
return readed;
}
void setup()
{
Serial.begin(BAUD_RATE);
}
void loop()
{
if (serialReadFunc() == "MARCO")
{
Serial.println("MARCOCORRECT");
}
else
Serial.println(readed);
}
Console Image On Proteus
Console Image Proteus
I suspect you're having synchronization issues. I may be wrong, though, and I'm unable to test it at the moment.
I'd recommend trying to insert a delay on the sender, like so:
String readed;
while (Serial.available() > 0)
{
readed += Serial.read();
}
delay(10);
Serial.println("#MARCO*");
It would also be interesting to see the return value of the reader Serial.available(). Again, not 100% sure, but I believe the buffer may be full (the buffer holds 64 bytes).
I have 2 Arduinos Leonardo and I want them to communicate itself, so I did the following code:
void setup() {
Serial.begin(9600);
Serial1.begin(9600);
}
void loop() {
String outMessage = ""; // String to hold input
while (Serial.available() > 0) { // check if at least 1 char is available
char inChar = Serial.read();
outMessage.concat(inChar); // add inChar to outMessage
}
if (outMessage != "") {
Serial.println("Sent: " + outMessage); // View Arduino 1 in Serial Monitor 1
Serial1.print(outMessage); // Send to Arduino 2
}
while (Serial1.available() > 0) {
Serial.print("Received: "); // View Arduino 1 in Serial Monitor 2
Serial.print(Serial1.read()); // Received from Arduino 1
Serial.println();
}
}
I want to send a message from Arduino 1, print in Serial Monitor and send via TX1 to Arduino 2 and vice-versa. The problem is that I don't receive what I was expecting. For instance if I type test:
Arduino 1:
Sent: test
Arduino 2:
Received: t
Received: e
Received: s
Received: t
I also tryed to do the receiving side like the sending side and use Serial.write but with no sucess.
Is there a easier way to do that or to fix it?
Thanks
Has mentioned by Hans, you need a protocol.
This is what I use to consider a message in Arduino to be a complete message:
char inData[10];
int index;
boolean started = false;
boolean ended = false;
String message =("I am Arduino 1 and I am ready");
void setup(){
Serial.begin(9600);
Serial.println(message);
}
void loop()
{
while(Serial.available() > 0)
{
char aChar = Serial.read();
if(aChar == '>')
{
started = true;
index = 0;
inData[index] = '\0';
}
else if(aChar == '<')
{
ended = true;
}
else if(started)
{
inData[index] = aChar;
index++;
inData[index] = '\0';
}
}
if(started && ended)
{
int inInt = atoi(inData);
Serial.println(inInt);
}
// Get ready for the next time
started = false;
ended = false;
index = 0;
inData[index] = '\0';
}
So, basically a message is considered completed only if it is between the special characters ><, like this: >message<. Then you can do the same on reading.
It does not have to be too complicated. If you look carefully at your last whlie-loop you can see that the software does not get a chance to read more than one character each time it passes through the loop. So that is what you get: one character at a time.
In your first while-loop you did better: you collected all the incoming letters until nothing was available and then sent them all at once. So if you make your last loop look more like the first one, you'll get a better result.
As mentioned a protocol to frame messages is needed between devices. A quick way to do this is to use Bill Porter's EasyTransfer library which does exactly what you are trying to do, over either UART or I2C. It has several examples.
Serial.read() reads only one byte every time you use it. A simple solution would be to store each byte on a char array while Serial.available>0 and then print the String with the whole message that was sent.
char message[40];
int count = 0;
while(Serial.available()>0){
message[count++] = Serial.read();
}
Serial.println(message);
First of all, sorry for the confusing title. I'm trying to make a simple program on my arduino that echos the serial input received from the serial monitor. My code is this:
String string= "";
String string2 = "";
void setup()
{
Serial.begin(9600);
}
void loop() {
string = "";
while(Serial.available() > 0)
{
string += (char) Serial.read();
Serial.flush();
}
if(string != "")
{
Serial.println(string);
}
}
But when I upload it and open the serial monitor, and input anything it is spread over several lines, as so:
Input: Why are you doing this?
W
hy
are y
ou doin
g this?
I've been stuck on this for hours now. My device is the Arduino Uno (Offical), I'm running on windows 7. Thanks in advance for any help.
Edit: Serial.print(string) returns nothing, leaves the console screen blank.
Use Serial.print(string); instead of println()
println() Prints data to the serial port as human-readable ASCII text followed by a carriage return character (ASCII 13, or '\r') and a newline character (ASCII 10, or '\n').
Ref: http://arduino.cc/en/Serial/Println
Just make a little delay in your while loop
so the code is:
String string= "";
String string2 = "";
void setup()
{
Serial.begin(9600);
}
void loop() {
string = "";
while(Serial.available() > 0)
{
string += (char) Serial.read();
Serial.flush();
delay(10);
}
if(string != "")
{
Serial.println(string);
}
}
I'm using two Arduinos to sent plain text strings to each other using NewSoftSerial and an RF transceiver.
Each string is perhaps 20-30 characters in length. How do I convert Serial.read() into a string so I can do if x == "testing statements", etc.?
Unlimited string readed:
String content = "";
char character;
while(Serial.available()) {
character = Serial.read();
content.concat(character);
}
if (content != "") {
Serial.println(content);
}
From Help with Serial.Read() getting string:
char inData[20]; // Allocate some space for the string
char inChar = -1; // Where to store the character read
byte index = 0; // Index into array; where to store the character
void setup() {
Serial.begin(9600);
Serial.write("Power On");
}
char Comp(char* This) {
while (Serial.available() > 0) // Don't read unless there
// you know there is data
{
if(index < 19) // One less than the size of the array
{
inChar = Serial.read(); // Read a character
inData[index] = inChar; // Store it
index++; // Increment where to write next
inData[index] = '\0'; // Null terminate the string
}
}
if (strcmp(inData, This) == 0) {
for (int i=0; i<19; i++) {
inData[i] = 0;
}
index = 0;
return(0);
}
else {
return(1);
}
}
void loop()
{
if (Comp("m1 on") == 0) {
Serial.write("Motor 1 -> Online\n");
}
if (Comp("m1 off") == 0) {
Serial.write("Motor 1 -> Offline\n");
}
}
You can use Serial.readString() and Serial.readStringUntil() to parse strings from Serial on the Arduino.
You can also use Serial.parseInt() to read integer values from serial.
int x;
String str;
void loop()
{
if(Serial.available() > 0)
{
str = Serial.readStringUntil('\n');
x = Serial.parseInt();
}
}
The value to send over serial would be my string\n5 and the result would be str = "my string" and x = 5
I was asking the same question myself and after some research I found something like that.
It works like a charm for me. I use it to remote control my Arduino.
// Buffer to store incoming commands from serial port
String inData;
void setup() {
Serial.begin(9600);
Serial.println("Serial conection started, waiting for instructions...");
}
void loop() {
while (Serial.available() > 0)
{
char recieved = Serial.read();
inData += recieved;
// Process message when new line character is recieved
if (recieved == '\n')
{
Serial.print("Arduino Received: ");
Serial.print(inData);
// You can put some if and else here to process the message juste like that:
if(inData == "+++\n"){ // DON'T forget to add "\n" at the end of the string.
Serial.println("OK. Press h for help.");
}
inData = ""; // Clear recieved buffer
}
}
}
This would be way easier:
char data [21];
int number_of_bytes_received;
if(Serial.available() > 0)
{
number_of_bytes_received = Serial.readBytesUntil (13,data,20); // read bytes (max. 20) from buffer, untill <CR> (13). store bytes in data. count the bytes recieved.
data[number_of_bytes_received] = 0; // add a 0 terminator to the char array
}
bool result = strcmp (data, "whatever");
// strcmp returns 0; if inputs match.
// http://en.cppreference.com/w/c/string/byte/strcmp
if (result == 0)
{
Serial.println("data matches whatever");
}
else
{
Serial.println("data does not match whatever");
}
The best and most intuitive way is to use serialEvent() callback Arduino defines along with loop() and setup().
I've built a small library a while back that handles message reception, but never had time to opensource it.
This library receives \n terminated lines that represent a command and arbitrary payload, space-separated.
You can tweak it to use your own protocol easily.
First of all, a library, SerialReciever.h:
#ifndef __SERIAL_RECEIVER_H__
#define __SERIAL_RECEIVER_H__
class IncomingCommand {
private:
static boolean hasPayload;
public:
static String command;
static String payload;
static boolean isReady;
static void reset() {
isReady = false;
hasPayload = false;
command = "";
payload = "";
}
static boolean append(char c) {
if (c == '\n') {
isReady = true;
return true;
}
if (c == ' ' && !hasPayload) {
hasPayload = true;
return false;
}
if (hasPayload)
payload += c;
else
command += c;
return false;
}
};
boolean IncomingCommand::isReady = false;
boolean IncomingCommand::hasPayload = false;
String IncomingCommand::command = false;
String IncomingCommand::payload = false;
#endif // #ifndef __SERIAL_RECEIVER_H__
To use it, in your project do this:
#include <SerialReceiver.h>
void setup() {
Serial.begin(115200);
IncomingCommand::reset();
}
void serialEvent() {
while (Serial.available()) {
char inChar = (char)Serial.read();
if (IncomingCommand::append(inChar))
return;
}
}
To use the received commands:
void loop() {
if (!IncomingCommand::isReady) {
delay(10);
return;
}
executeCommand(IncomingCommand::command, IncomingCommand::payload); // I use registry pattern to handle commands, but you are free to do whatever suits your project better.
IncomingCommand::reset();
Here is a more robust implementation that handles abnormal input and race conditions.
It detects unusually long input values and safely discards them. For example, if the source had an error and generated input without the expected terminator; or was malicious.
It ensures the string value is always null terminated (even when buffer size is completely filled).
It waits until the complete value is captured. For example, transmission delays could cause Serial.available() to return zero before the rest of the value finishes arriving.
Does not skip values when multiple values arrive quicker than they can be processed (subject to the limitations of the serial input buffer).
Can handle values that are a prefix of another value (e.g. "abc" and "abcd" can both be read in).
It deliberately uses character arrays instead of the String type, to be more efficient and to avoid memory problems. It also avoids using the readStringUntil() function, to not timeout before the input arrives.
The original question did not say how the variable length strings are defined, but I'll assume they are terminated by a single newline character - which turns this into a line reading problem.
int read_line(char* buffer, int bufsize)
{
for (int index = 0; index < bufsize; index++) {
// Wait until characters are available
while (Serial.available() == 0) {
}
char ch = Serial.read(); // read next character
Serial.print(ch); // echo it back: useful with the serial monitor (optional)
if (ch == '\n') {
buffer[index] = 0; // end of line reached: null terminate string
return index; // success: return length of string (zero if string is empty)
}
buffer[index] = ch; // Append character to buffer
}
// Reached end of buffer, but have not seen the end-of-line yet.
// Discard the rest of the line (safer than returning a partial line).
char ch;
do {
// Wait until characters are available
while (Serial.available() == 0) {
}
ch = Serial.read(); // read next character (and discard it)
Serial.print(ch); // echo it back
} while (ch != '\n');
buffer[0] = 0; // set buffer to empty string even though it should not be used
return -1; // error: return negative one to indicate the input was too long
}
Here is an example of it being used to read commands from the serial monitor:
const int LED_PIN = 13;
const int LINE_BUFFER_SIZE = 80; // max line length is one less than this
void setup() {
pinMode(LED_PIN, OUTPUT);
Serial.begin(9600);
}
void loop() {
Serial.print("> ");
// Read command
char line[LINE_BUFFER_SIZE];
if (read_line(line, sizeof(line)) < 0) {
Serial.println("Error: line too long");
return; // skip command processing and try again on next iteration of loop
}
// Process command
if (strcmp(line, "off") == 0) {
digitalWrite(LED_PIN, LOW);
} else if (strcmp(line, "on") == 0) {
digitalWrite(LED_PIN, HIGH);
} else if (strcmp(line, "") == 0) {
// Empty line: no command
} else {
Serial.print("Error: unknown command: \"");
Serial.print(line);
Serial.println("\" (available commands: \"off\", \"on\")");
}
}
String content = "";
char character;
if(Serial.available() >0){
//reset this variable!
content = "";
//make string from chars
while(Serial.available()>0) {
character = Serial.read();
content.concat(character);
}
//send back
Serial.print("#");
Serial.print(content);
Serial.print("#");
Serial.flush();
}
If you want to read messages from the serial port and you need to deal with every single message separately I suggest separating messages into parts using a separator like this:
String getMessage()
{
String msg=""; //the message starts empty
byte ch; // the character that you use to construct the Message
byte d='#';// the separating symbol
if(Serial.available())// checks if there is a new message;
{
while(Serial.available() && Serial.peek()!=d)// while the message did not finish
{
ch=Serial.read();// get the character
msg+=(char)ch;//add the character to the message
delay(1);//wait for the next character
}
ch=Serial.read();// pop the '#' from the buffer
if(ch==d) // id finished
return msg;
else
return "NA";
}
else
return "NA"; // return "NA" if no message;
}
This way you will get a single message every time you use the function.
Credit for this goes to magma. Great answer, but here it is using c++ style strings instead of c style strings. Some users may find that easier.
String string = "";
char ch; // Where to store the character read
void setup() {
Serial.begin(9600);
Serial.write("Power On");
}
boolean Comp(String par) {
while (Serial.available() > 0) // Don't read unless
// there you know there is data
{
ch = Serial.read(); // Read a character
string += ch; // Add it
}
if (par == string) {
string = "";
return(true);
}
else {
//dont reset string
return(false);
}
}
void loop()
{
if (Comp("m1 on")) {
Serial.write("Motor 1 -> Online\n");
}
if (Comp("m1 off")) {
Serial.write("Motor 1 -> Offline\n");
}
}
If you're using concatenate method then don't forget to trim the string if you're working with if else method.
Use string append operator on the serial.read(). It works better than string.concat()
char r;
string mystring = "";
while(serial.available()){
r = serial.read();
mystring = mystring + r;
}
After you are done saving the stream in a string(mystring, in this case), use SubString functions to extract what you are looking for.
I could get away with this:
void setup() {
Serial.begin(9600);
}
void loop() {
String message = "";
while (Serial.available())
message.concat((char) Serial.read());
if (message != "")
Serial.println(message);
}
Many great answers, here is my 2 cents with exact functionality as requested in the question.
Plus it should be a bit easier to read and debug.
Code is tested up to 128 chars of input.
Tested on Arduino uno r3 (Arduino IDE 1.6.8)
Functionality:
Turns Arduino onboard led (pin 13) on or off using serial command input.
Commands:
LED.ON
LED.OFF
Note: Remember to change baud rate based on your board speed.
// Turns Arduino onboard led (pin 13) on or off using serial command input.
// Pin 13, a LED connected on most Arduino boards.
int const LED = 13;
// Serial Input Variables
int intLoopCounter = 0;
String strSerialInput = "";
// the setup routine runs once when you press reset:
void setup()
{
// initialize the digital pin as an output.
pinMode(LED, OUTPUT);
// initialize serial port
Serial.begin(250000); // CHANGE BAUD RATE based on the board speed.
// initialized
Serial.println("Initialized.");
}
// the loop routine runs over and over again forever:
void loop()
{
// Slow down a bit.
// Note: This may have to be increased for longer strings or increase the iteration in GetPossibleSerialData() function.
delay(1);
CheckAndExecuteSerialCommand();
}
void CheckAndExecuteSerialCommand()
{
//Get Data from Serial
String serialData = GetPossibleSerialData();
bool commandAccepted = false;
if (serialData.startsWith("LED.ON"))
{
commandAccepted = true;
digitalWrite(LED, HIGH); // turn the LED on (HIGH is the voltage level)
}
else if (serialData.startsWith("LED.OFF"))
{
commandAccepted = true;
digitalWrite(LED, LOW); // turn the LED off by making the voltage LOW
}
else if (serialData != "")
{
Serial.println();
Serial.println("*** Command Failed ***");
Serial.println("\t" + serialData);
Serial.println();
Serial.println();
Serial.println("*** Invalid Command ***");
Serial.println();
Serial.println("Try:");
Serial.println("\tLED.ON");
Serial.println("\tLED.OFF");
Serial.println();
}
if (commandAccepted)
{
Serial.println();
Serial.println("*** Command Executed ***");
Serial.println("\t" + serialData);
Serial.println();
}
}
String GetPossibleSerialData()
{
String retVal;
int iteration = 10; // 10 times the time it takes to do the main loop
if (strSerialInput.length() > 0)
{
// Print the retreived string after looping 10(iteration) ex times
if (intLoopCounter > strSerialInput.length() + iteration)
{
retVal = strSerialInput;
strSerialInput = "";
intLoopCounter = 0;
}
intLoopCounter++;
}
return retVal;
}
void serialEvent()
{
while (Serial.available())
{
strSerialInput.concat((char) Serial.read());
}
}
This always works for me :)
String _SerialRead = "";
void setup() {
Serial.begin(9600);
}
void loop() {
while (Serial.available() > 0) //Only run when there is data available
{
_SerialRead += char(Serial.read()); //Here every received char will be
//added to _SerialRead
if (_SerialRead.indexOf("S") > 0) //Checks for the letter S
{
_SerialRead = ""; //Do something then clear the string
}
}
}