I am using react native and Expo. I am unable to build new app because after I use expo init appName it shows the following error.
Heres the full message:
📦 Using npm to install packages. You can pass --yarn to use Yarn instead.
√ Downloaded and extracted project files.
× Something when wrong installing JavaScript dependencies. Check your npm logs. Continuing to initialize the app.
✅ Your project is ready!
To run your project, navigate to the directory and run one of the following npm commands.
- cd Scanner
- npm start # you can open iOS, Android, or web from here, or run them directly with the commands below.
- npm run android
- npm run ios # requires an iOS device or macOS for access to an iOS simulator
- npm run web
I tried multiple times to create a blank project, also tried npm install to install failed/not downloaded libraries and continue after failure but it showed another error:
npm ERR! code Z_BUF_ERROR
npm ERR! errno -5
npm ERR! zlib: unexpected end of file
also tried npm cache verify that showed cache is ok Content verified: 3562 (252580364 bytes).
So, How can I solve this issue?
Problems related to npm installation are very common If you do any mistake in early installation, but is avoided. Learn more about npm tree.
Steps worked for me are :
npm cache clean --force
npm cache verify
npm -g uninstall expo-cli --save
npm install expo-cli --global
expo init app-name
cd app-name
npm start
Always run as administrator if working on Windows and in root directory.
The solutions above didn't work for me but if you use 'npm install' in the directory of the app you get a clue that you shuold try 'npm install --force'
err message
You should have all these files folders and files at the start of the project otherwise not all the dependencies have been installed which is why we were getting the problem.folder structure
After you have added --force to npm install you have all the dependencies installed. Now you can run the app with npm start.
Unfortunately, all the solutions described above didn't work on my machine...
Here is my latest solution for this problem...
This worked 100% on my machine...
Use npm i -g expo-cli
This will automatically add the required packages and also remove the unnecessary ones.
Yes, surely, you don't need to uninstall and re-install it again.
Just follow my steps.
And, you can create your expo project using expo init.
I hope my solution will help you out from this annoying problem....
I just did npm install and it worked for me, but I had do that every time I create a new expo project.
I also encountered this problem, and finally found that it was the problem of react native cli,I installed the latest version of react native cli,Expo is back to normal
This Error is regarding to the git account. expos need a git account to setup react native project
If you are using windows you need to install git in your local PC
after that open your Terminal and type this command
git config --global user.name "your_username"
git config --global user.email "your_email_address#example.com"
after that clone any github project to your local computer. it will ask to login to Github
after all these steps try expo init <projectname>
The simple way to settle that error is by using "expo-cli init app-name" instead of "expo init app-name".
I tried and worked perfectly for me. Hope it will help you guys.
i have faced a similar problem and running yarn set version 1.22.1 fix it
Run the Command Prompt as an administrator. And run the following command:
npx create-expo-app AwesomeProject
I'm trying to use Firebase's new Next.js support for Hosting (see https://firebase.google.com/docs/hosting/nextjs) but I'm getting a weird error when I try to deploy. (Everything runs correctly in the local emulator suite, btw)
Screenshot of Console output with error
When I try to run firebase deploy --only hosting,functions -m "testing out next.js support" I'm getting the error Unable to find 'esbuild'. Install it into your local dev dependencies with 'npm i --save-dev esbuild''. I've already added esbuild to my dev dependencies, and it seems to be installed correctly. My project uses yarn, not npm, but for the sake of testing I tried install it with npm like the error suggested, but that didn't work either.
Has anyone used Firebase Next.js hosting or figured it out since they've released it? The documentation on that page I linked above is... not great.
Make sure that you are using the latest Firebase Tools as per the documentation: "Firebase CLI version 11.14.2 or later".
Run npm install -g firebase-tools to update your version.
I have some troubles deploying a Nuxt 2.4 application on Firebase.
I tried these 2 tutorials but they seem outdated:
https://www.youtube.com/watch?v=ZYUWsjUxxUQ
https://github.com/davidroyer/nuxt2-ssr-firebase
With the first tutorial, I could make my app working on local (after few hours and with a lot of modifications for babel integration) but I never could serve or deploy it. I thought the tutorial was old and manipulations can't be exactly done like the guy did.
With the second tutorial, I cloned the repository to try to deploy the example. I had to change 2 things : install Node 8 instead of Node 10 and upgrading firebase-admin to the last version in prod/server dir. Here is what I got:
npm run setup is ok
npm run dev is ok and the project works fine
npm run build is ok
npm run serve fails.
First I got this error :
The Cloud Functions emulator requires the module "firebase-admin" to be version >7.0.0 so your version is too old. You can probably fix this by running "npm install firebase-admin#latest" in your functions directory.
Indeed, the version configured in package.json is the 5.13. I did the update from the prod/server dir, and I get the 8.0.0.
And then I got a different error about gRPC :
Error: Failed to load gRPC binary module because it was not installed for the current system
Expected directory: node-v57-darwin-x64-unknown
Found: [node-v64-darwin-x64-unknown]
This problem can often be fixed by running "npm rebuild" on the current system
I tried npm rebuild as mentionned, without success.
npm run deploy fails.
I get this trace:
i deploying functions, hosting
i functions: ensuring necessary APIs are enabled...
✔ functions: all necessary APIs are enabled
i functions: preparing prod/server directory for uploading...
Error: Error parsing triggers: Cannot find module 'acorn'
Try running "npm install" in your functions directory before deploying.
Of course, I tried the npm install from prod/server dir, but nothing changed.
Is there somewhere i can find a tutorial that can help me deploy my SSR app to firebase ? Thanks in avdance !
EDIT 1 :
After a few modifications on my package.json
upgrading firebase-functions and express to the latest versions
downgrading firebase-admin to the 7.0.0 version
adding acorn
I can serve and deploy but I get a "504 gateway time-out" webpage when I call the URL....
Have you tried to run npm install grpc inside functions folder?
I am trying to deploy an app that has been upgraded to meteor 1.7 using the setup for passenger outlined at puhsionpasserger.com, however when I try and access the app I get an error in the console of
Error: The core-js npm package could not be found in your node_modules directory. Please run the following command to install it: meteor npm install --save core-js
Being shown on the web page (although the favercon is correct so its trying).
The app runs fine locally (as in on the dev machine).
Give its deployed, meteor doesn't exist on the machine.
I tried npm install --save core.js and it reported one package installed, but still no joy on the app front.
I'm not sure where to go from here. Any thoughts?
Edit:
I just tried building the app without the --server-only flag with no change. Deployed the app the way I do with the v1.3 instances of the app and no change.
One thing that I did get when running npm intall from the /programs/server directory was
Binary is fine; exiting
npm WARN lifecycle meteor-dev-bundle#~install: cannot run in wd %s %s (wd=%s) meteor-dev-bundle# node npm-rebuild.js /opt/bundle/programs/server
added 131 packages in 13.857s
I'm not sure if the warning means anything in particular.
I've created package and published it, It is just a simple wrapper of "phantom"
I deployed it using
sudo meteor publih --create
then added it to my app
$> meteor show sasi513:phantom#1.0.0
Version 1.0.0 : phantom node Package wrapper
Architectures: os.linux.x86_32+web.browser+web.cordova
Maintained by sasi513.
EDIT
Then when I try to deploy it meteor deploy xxx.meteor.com
Errors prevented deploying:
While building the application:
error: Unable to download package builds for this architecture.
and I tried to publish-for-arch
sudo meteor publish-for-arch sasi513:phantom#1.0.0
sasi513:phantom: updating npm dependencies -- phantom...
Bundling build...
Creating package build...
Uploading build...
Publishing package build...
Error from package server
: Cannot override existing build [403]
What is wrong here?Anyone has idea about this
The documentation says:
You need to run publish-for-arch from a different architecture to
upload a different build.
Are you running the command on a different architecture? Or the same machine? Because running the command on the same machine wont work.[1] Based on your description, it sounds like you didn't try it from the other architecture you want to support.
[1] http://docs.meteor.com/#meteorpublishforarch