I am trying to run the following command in ubuntu terminal
patch -p0 -i adjustmentFile.patch
That is giving the following error
patching file ./src/helpStructures/CastaliaModule.cc
patching file ./src/node/communication/mac/tunableMac/TunableMAC.cc
Hunk #2 FAILED at 456.
1 out of 2 hunks FAILED -- saving rejects to file ./src/node/communication/mac/tunableMac/TunableMAC.cc.rej
I tried almost all the ways suggested in the link Hunk #1 FAILED at 1. What's that mean?. However, nothing worked.
Here is my version detail
VIM - Vi IMproved 8.0 (2016 Sep 12, compiled Jun 06 2019 17:31:41)
Included patches: 1-1453
The patch file:
diff -r -u ./src/helpStructures/CastaliaModule.cc ./src/helpStructures/CastaliaModule.cc
--- ./src/helpStructures/CastaliaModule.cc 2010-12-09 09:56:47.000000000 -0300
+++ ./src/helpStructures/CastaliaModule.cc 2011-12-20 00:16:39.944320051 -0300
## -180,6 +180,8 ##
classPointers.resourceManager = getParentModule()->getParentModule()->getSubmodule("ResourceManager");
else if (name.compare("SensorManager") == 0)
classPointers.resourceManager = getParentModule()->getSubmodule("ResourceManager");
+ else if (name.compare("Routing") == 0)
+ classPointers.resourceManager = getParentModule()->getParentModule()->getSubmodule("ResourceManager");
else
opp_error("%s module has no rights to call drawPower() function", getFullPath().c_str());
if (!classPointers.resourceManager)
Only in ./src/helpStructures: CastaliaModule.cc~
diff -r -u ./src/node/communication/mac/tunableMac/TunableMAC.cc ./src/node/communication/mac/tunableMac/TunableMAC.cc
--- ./src/node/communication/mac/tunableMac/TunableMAC.cc 2011-03-30 02:14:34.000000000 -0300
+++ ./src/node/communication/mac/tunableMac/TunableMAC.cc 2011-12-19 23:57:43.894686687 -0300
## -405,6 +405,8 ##
void TunableMAC::fromRadioLayer(cPacket * pkt, double rssi, double lqi)
{
TunableMacPacket *macFrame = dynamic_cast <TunableMacPacket*>(pkt);
+ macFrame->getMacRadioInfoExchange().RSSI = rssi;
+ macFrame->getMacRadioInfoExchange().LQI = lqi;
if (macFrame == NULL){
collectOutput("TunableMAC packet breakdown", "filtered, other MAC");
return;
## -454,7 +456,8 ##
}
case DATA_FRAME:{
- toNetworkLayer(macFrame->decapsulate());
+ cPacket *netPkt = decapsulatePacket(macFrame);
+ toNetworkLayer(netPkt);
collectOutput("TunableMAC packet breakdown", "received data pkts");
if (macState == MAC_STATE_RX) {
cancelTimer(ATTEMPT_TX);
Only in ./src/node/communication/mac/tunableMac: TunableMAC.cc~
Patching takes some changes made to a file X, and applies them to a different instance of file X. That is, suppose you start with generation 1 of file X; you make changes to get generation 2-a, and someone else starts with generation 1 to make generation 2-b. Now you want to take his edits that created his generation 2-b, and apply them to your generation 2-a.
If 'his' changes clash with 'your' changes, they cannot be automatically patched.
You'll need to look at the changes being made in hunk 2.
- toNetworkLayer(macFrame->decapsulate());
+ cPacket *netPkt = decapsulatePacket(macFrame);
+ toNetworkLayer(netPkt);
and figure out what you want the result to look like. Someone needs to know what the result is supposed to be. You can't resolve conflicts without knowledge of intent.
I need to update 290 000 lines from a csv file in my database.
I created a loop on each line to do an update, the quesry looks like this :
UPDATE lines_table
INNER JOIN account ON lines_table.account_id = account.id
SET account.is_updated = 1
WHERE account.is_updated = 1
AND lines_table.user_id=XXXXX
AND lines_table.code = 'YY';
AND account.compte 'ZZZZZZZ';
the php loop looks like this :
$conn = $this->em->getConnection();
while (([$key, $account, $user] = fgetcsv($handle, 1000, ';')) !== false) {
$stmt = $conn->prepare($sql);
$stmt->execute();
}
On my computer (wamp + symfony3 + SSD + mariaDB), it updates 85 lines per second.
When i execute this loop in my test environment (linux + symfony3 + 48 HDD 10k rpm, mariaDB), it updates only 4 lines per second.
Is there a config that could be different and make this loop slower ?
I'm working with python 3.7 and OS - Windows 10 pro.
I have URLs like:
http://example.com/[text, image, table]/[0001-8000].pdf
I'm trying to form a table which would look like
1 - Text
2 - Image
3 - Text
4 - Table
5 - Image
etc.
I've tried using http.client, urlopen from urllib.request, requests etc. All are either getting timed out or giving nonnumeric port error.
One example:
import requests
baseURL = 'http://example.com/'
type = ['text', 'image', 'table']
for fN in range (8000):
for tp in type:
workURL = baseURL + tp + '/' + str(fN + 1).zfill(4) + '.pdf'
if requests.head(workURL, timeout = 0.0001).status_code == 200:
"write fN + 1 and tp values to a csv file before proceeding to the next loop with next fN."
break
No output. Simply 'hangs' at if requests.head(workURL, timeout = 0.0001).status_code == 200:
I'm trying to get rid of my minimize, maximize and close buttons on all windows. Googling around I found this:
$h = WinGetHandle("[CLASS:Notepad]")
$iOldStyle = _WinAPI_GetWindowLong($h, $GWL_STYLE)
$iNewStyle = BitXOr($iOldStyle, $WS_SYSMENU)
_WinAPI_SetWindowLong($h, $GWL_STYLE, $iNewStyle)
_WinAPI_ShowWindow($h, #SW_SHOW)
This works fine, so now I only need to iterate over all windows with this code, and I'm done. How do I get a list of all HWNDs in the system?
You can get a list of all open windows using WinList:
$aWindows = WinList()
For $i=1 To $aWindows[0][0]
; skip windows without a title
If $aWindows[$i][0] = '' Then ContinueLoop
;use the HWND to get the state of the window
$iWndState = WinGetState($aWindows[$i][1])
; here you could filter out the windows you don't want to modify
ConsoleWrite($aWindows[$i][0] & ': ')
If BitAND($iWndState,1) = 1 Then ConsoleWrite(' exists')
If BitAND($iWndState,2) = 2 Then ConsoleWrite(' visible')
If BitAND($iWndState,4) = 4 Then ConsoleWrite(' enabled')
If BitAND($iWndState,8) = 8 Then ConsoleWrite(' active')
If BitAND($iWndState,16) = 16 Then ConsoleWrite(' minimised')
If BitAND($iWndState,32) = 32 Then ConsoleWrite(' maximised')
ConsoleWrite(#CRLF)
Next
i have a small problem i need to count words inside the console to read doc, docx, pptx, ppt, xls, xlsx, odt, pdf ... so don't suggest me | wc -w or grep because they work only with text or console output and they count only spaces and in japanese, chinese, arabic , hindu , hebrew they use diferent delimiter so the word count is wrong and i tried to count with this
pdftotext file.pdf -| wc -w
/usr/local/bin/docx2txt.pl < file.docx | wc -w
/usr/local/bin/pptx2txt.pl < file.pptx | wc -w
antiword file.doc -| wc -w
antiword file.word -| wc -w
in some cases microsoft word , openoffice sad 1000 words and the counters return 10 or 300 words if the language is ( japanese , chinese, hindu ect... ) , but if i use normal characters then i have no issue the biggest mistake is in some case 3 chars less witch is "OK"
i tried to convert with soffice , openoffice and then try WC -w but i can't even convert ,
soffice --headless --nofirststartwizard --accept=socket,host=127.0.0.1,port=8100; --convert-to pdf some.pdf /var/www/domains/vocabridge.com/devel/temp_files/23/0/东京_1000_words_Docx.docx
OR
openoffice.org --headless --convert-to ........
OR
openoffice.org3 --invisible
so if someone know any way to count correctly or display document statistic with openoffice or anything else or linux with the console please share it
thanks.
If you have Microsoft Word (and Windows, obviously) you can write a VBA macro or if you want to run straight from the command line you can write a VBScript script with something like the following:
wordApp = CreateObject("Word.Application")
doc = ... ' open up a Word document using wordApp
docWordCount = doc.Words.Count
' Rinse and repeat...
If you have OpenOffice.org/LibreOffice you have similar (but more) options. If you want to stay in the office app and run a macro you can probably do that. I don't know the StarBasic API well enough to tell you how but I can give you the alternative: creating a Python script to get the word count from the command line. Roughly speaking, you do the following:
Start up your copy of OOo/LibO from the command line with the appropriate parameters to accept incoming socket connections. http://www.openoffice.org/udk/python/python-bridge.html has instructions on how to do that. Go there and use the browser's in-page find feature to search for `accept=socket'
Write a Python script to use the OOo/LibO UNO bridge (basically equivalent to the VBScript example above) to open up your Word/ODT documents one at a time and get the word count from each. The above page should give you a good start to doing that.
You get the word count from a document model object's WordCount property: http://www.openoffice.org/api/docs/common/ref/com/sun/star/text/GenericTextDocument.html#WordCount
Just building on to what #Yawar wrote. Here is is more explicit steps for how to word count with MS word from the console.
I also use the more accurate Range.ComputeStatistics(wdStatisticWords) instead of the Words property. See here for more info: https://support.microsoft.com/en-za/help/291447/word-count-appears-inaccurate-when-you-use-the-vba-words-property
Make a script called wc.vbs and then put this in it:
Set word = CreateObject("Word.Application")
word.Visible = False
Set doc = word.Documents.Open("<replace with absolute path to your .docx/.pdf>")
docWordCount = doc.Range.ComputeStatistics(wdStatisticWords)
word.Quit
Dim StdOut : Set StdOut = CreateObject("Scripting.FileSystemObject").GetStandardStream(1)
WScript.Echo docWordCount & " words"
Open powershell in the directory you saved wc.vbs and run cscript .\wc.vbs and you'll get back the word count :)
I think this may do what you are aiming for
# Continuously updating word count
import unohelper, uno, os, time
from com.sun.star.i18n.WordType import WORD_COUNT
from com.sun.star.i18n import Boundary
from com.sun.star.lang import Locale
from com.sun.star.awt import XTopWindowListener
#socket = True
socket = False
localContext = uno.getComponentContext()
if socket:
resolver = localContext.ServiceManager.createInstanceWithContext('com.sun.star.bridge.UnoUrlResolver', localContext)
ctx = resolver.resolve('uno:socket,host=localhost,port=2002;urp;StarOffice.ComponentContext')
else: ctx = localContext
smgr = ctx.ServiceManager
desktop = smgr.createInstanceWithContext('com.sun.star.frame.Desktop', ctx)
waittime = 1 # seconds
def getWordCountGoal():
doc = XSCRIPTCONTEXT.getDocument()
retval = 0
# Only if the field exists
if doc.getTextFieldMasters().hasByName('com.sun.star.text.FieldMaster.User.WordCountGoal'):
# Get the field
wordcountgoal = doc.getTextFieldMasters().getByName('com.sun.star.text.FieldMaster.User.WordCountGoal')
retval = wordcountgoal.Content
return retval
goal = getWordCountGoal()
def setWordCountGoal(goal):
doc = XSCRIPTCONTEXT.getDocument()
if doc.getTextFieldMasters().hasByName('com.sun.star.text.FieldMaster.User.WordCountGoal'):
wordcountgoal = doc.getTextFieldMasters().getByName('com.sun.star.text.FieldMaster.User.WordCountGoal')
wordcountgoal.Content = goal
# Refresh the field if inserted in the document from Insert > Fields >
# Other... > Variables > Userdefined fields
doc.TextFields.refresh()
def printOut(txt):
if socket: print txt
else:
model = desktop.getCurrentComponent()
text = model.Text
cursor = text.createTextCursorByRange(text.getEnd())
text.insertString(cursor, txt + '\r', 0)
def hotCount(st):
'''Counts the number of words in a string.
ARGUMENTS:
str st: count the number of words in this string
RETURNS:
int: the number of words in st'''
startpos = long()
nextwd = Boundary()
lc = Locale()
lc.Language = 'en'
numwords = 1
mystartpos = 1
brk = smgr.createInstanceWithContext('com.sun.star.i18n.BreakIterator', ctx)
nextwd = brk.nextWord(st, startpos, lc, WORD_COUNT)
while nextwd.startPos != nextwd.endPos:
numwords += 1
nw = nextwd.startPos
nextwd = brk.nextWord(st, nw, lc, WORD_COUNT)
return numwords
def updateCount(wordCountModel, percentModel):
'''Updates the GUI.
Updates the word count and the percentage completed in the GUI. If some
text of more than one word is selected (including in multiple selections by
holding down the Ctrl/Cmd key), it updates the GUI based on the selection;
if not, on the whole document.'''
model = desktop.getCurrentComponent()
try:
if not model.supportsService('com.sun.star.text.TextDocument'):
return
except AttributeError: return
sel = model.getCurrentSelection()
try: selcount = sel.getCount()
except AttributeError: return
if selcount == 1 and sel.getByIndex(0).getString == '':
selcount = 0
selwords = 0
for nsel in range(selcount):
thisrange = sel.getByIndex(nsel)
atext = thisrange.getString()
selwords += hotCount(atext)
if selwords > 1: wc = selwords
else:
try: wc = model.WordCount
except AttributeError: return
wordCountModel.Label = str(wc)
if goal != 0:
pc_text = 100 * (wc / float(goal))
#pc_text = '(%.2f percent)' % (100 * (wc / float(goal)))
percentModel.ProgressValue = pc_text
else:
percentModel.ProgressValue = 0
# This is the user interface bit. It looks more or less like this:
###############################
# Word Count _ o x #
###############################
# _____ #
# 451 / |500| #
# ----- #
# ___________________________ #
# |############## | #
# --------------------------- #
###############################
# The boxed `500' is the text entry box.
class WindowClosingListener(unohelper.Base, XTopWindowListener):
def __init__(self):
global keepGoing
keepGoing = True
def windowClosing(self, e):
global keepGoing
keepGoing = False
setWordCountGoal(goal)
e.Source.setVisible(False)
def addControl(controlType, dlgModel, x, y, width, height, label, name = None):
control = dlgModel.createInstance(controlType)
control.PositionX = x
control.PositionY = y
control.Width = width
control.Height = height
if controlType == 'com.sun.star.awt.UnoControlFixedTextModel':
control.Label = label
elif controlType == 'com.sun.star.awt.UnoControlEditModel':
control.Text = label
elif controlType == 'com.sun.star.awt.UnoControlProgressBarModel':
control.ProgressValue = label
if name:
control.Name = name
dlgModel.insertByName(name, control)
else:
control.Name = 'unnamed'
dlgModel.insertByName('unnamed', control)
return control
def loopTheLoop(goalModel, wordCountModel, percentModel):
global goal
while keepGoing:
try: goal = int(goalModel.Text)
except: goal = 0
updateCount(wordCountModel, percentModel)
time.sleep(waittime)
if not socket:
import threading
class UpdaterThread(threading.Thread):
def __init__(self, goalModel, wordCountModel, percentModel):
threading.Thread.__init__(self)
self.goalModel = goalModel
self.wordCountModel = wordCountModel
self.percentModel = percentModel
def run(self):
loopTheLoop(self.goalModel, self.wordCountModel, self.percentModel)
def wordCount(arg = None):
'''Displays a continuously updating word count.'''
dialogModel = smgr.createInstanceWithContext('com.sun.star.awt.UnoControlDialogModel', ctx)
dialogModel.PositionX = XSCRIPTCONTEXT.getDocument().CurrentController.Frame.ContainerWindow.PosSize.Width / 2.2 - 105
dialogModel.Width = 100
dialogModel.Height = 30
dialogModel.Title = 'Word Count'
lblWc = addControl('com.sun.star.awt.UnoControlFixedTextModel', dialogModel, 6, 2, 25, 14, '', 'lblWc')
lblWc.Align = 2 # Align right
addControl('com.sun.star.awt.UnoControlFixedTextModel', dialogModel, 33, 2, 10, 14, ' / ')
txtGoal = addControl('com.sun.star.awt.UnoControlEditModel', dialogModel, 45, 1, 25, 12, '', 'txtGoal')
txtGoal.Text = goal
#addControl('com.sun.star.awt.UnoControlFixedTextModel', dialogModel, 6, 25, 50, 14, '(percent)', 'lblPercent')
ProgressBar = addControl('com.sun.star.awt.UnoControlProgressBarModel', dialogModel, 6, 15, 88, 10,'' , 'lblPercent')
ProgressBar.ProgressValueMin = 0
ProgressBar.ProgressValueMax =100
#ProgressBar.Border = 2
#ProgressBar.BorderColor = 255
#ProgressBar.FillColor = 255
#ProgressBar.BackgroundColor = 255
addControl('com.sun.star.awt.UnoControlFixedTextModel', dialogModel, 124, 2, 12, 14, '', 'lblMinus')
controlContainer = smgr.createInstanceWithContext('com.sun.star.awt.UnoControlDialog', ctx)
controlContainer.setModel(dialogModel)
controlContainer.addTopWindowListener(WindowClosingListener())
controlContainer.setVisible(True)
goalModel = controlContainer.getControl('txtGoal').getModel()
wordCountModel = controlContainer.getControl('lblWc').getModel()
percentModel = controlContainer.getControl('lblPercent').getModel()
ProgressBar.ProgressValue = percentModel.ProgressValue
if socket:
loopTheLoop(goalModel, wordCountModel, percentModel)
else:
uthread = UpdaterThread(goalModel, wordCountModel, percentModel)
uthread.start()
keepGoing = True
if socket:
wordCount()
else:
g_exportedScripts = wordCount,
Link for more info
https://superuser.com/questions/529446/running-word-count-in-openoffice-writer
Hope this helps regards tom
EDIT : Then i found this
http://forum.openoffice.org/en/forum/viewtopic.php?f=7&t=22555
wc can understand Unicode and uses system's iswspace function to find whether the unicode character is whitespace. "The iswspace() function tests whether wc is a wide-character code representing a character of class space in the program's current locale." So, wc -w should be able to correctly count words if your locale (LC_CTYPE) is configured correctly.
The source code of the wc program
The manual page for the iswspace function
I found the answer create one service
#!/bin/sh
#
# chkconfig: 345 99 01
#
# description: your script is a test service
#
(while sleep 1; do
ls pathwithfiles/in | while read file; do
libreoffice --headless -convert-to pdf "pathwithfiles/in/$file" --outdir pathwithfiles/out
rm "pathwithfiles/in/$file"
done
done) &
then the php script that i needed counted everything
$ext = pathinfo($absolute_file_path, PATHINFO_EXTENSION);
if ($ext !== 'txt' && $ext !== 'pdf') {
// Convert to pdf
$tb = mktime() . mt_rand();
$tempfile = 'locationofpdfs/in/' . $tb . '.' . $ext;
copy($absolute_file_path, $tempfile);
$absolute_file_path = 'locationofpdfs/out/' . $tb . '.pdf';
$ext = 'pdf';
while (!is_file($absolute_file_path)) sleep(1);
}
if ($ext !== 'txt') {
// Convert to txt
$tempfile = tempnam(sys_get_temp_dir(), '');
shell_exec('pdftotext "' . $absolute_file_path . '" ' . $tempfile);
$absolute_file_path = $tempfile;
$ext = 'txt';
}
if ($ext === 'txt') {
$seq = '/[\s\.,;:!\? ]+/mu';
$plain = file_get_contents($absolute_file_path);
$plain = preg_replace('#\{{{.*?\}}}#su', "", $plain);
$str = preg_replace($seq, '', $plain);
$chars = count(preg_split('//u', $str, -1, PREG_SPLIT_NO_EMPTY));
$words = count(preg_split($seq, $plain, -1, PREG_SPLIT_NO_EMPTY));
if ($words === 0) return $chars;
if ($chars / $words > 10) $words = $chars;
return $words;
}