Currently I ssh to the linux server and type in the following to start the meteor:
nohub meteor &
But as soon as I terminate the ssh session to the linux server, meteor goes down.
How do I run meteor run forever even after terminating the ssh session?
I use Forever in my Meteor app.
Related
I am seeking to set up a Release Pipeline in Azure DevOps Services that will deploy
an application to a Unix server, where it then executes some unix commands as part
of the deployment.
Would appreciate some guidance on which pipeline Task(s) I can set up to therefore
achieve the following objectives:
Connect to the Unix server.
Execute the required Unix commands.
By the way, the Agents are currently installed on Windows hosts but we are looking to
extend that to Unix servers in due course, so a solution that fits both setups would
be ideal, even though the former is the priority.
You can check out task SSH Deployment task.
Use this task to run shell commands or a script on a remote machine using SSH. This task enables you to connect to a remote machine using SSH and run commands or a script.
If you need to copy files to the remote linux server. You can check out Copy Files Over SSH task.
You probably need to create a SSH service connection. See steps here to create as service connection.
In the end, due to concerns raised about the install of private keys on the target server which is part of the SSH Deployment setup, we opted for the use of Deployment Groups which has enabled us to set up a persistent connection to our Linux server.
I'm trying to write a go application that would allow me to perform reverse ssh tunneling between a Windows machine and a Linux machine using the go ssh library.
In the process of doing so, I create a listener on the remote machine, as follows:
remoteListener, err := sshClient.Listen("tcp", remoteString)
where sshClient is an object of type ssh.Client and is configured to connect to the remote machine.
The issue here is that when the sshd process on the Linux machine disrupts the connection with the application, the ssh Listener remains alive on the remote machine. So, reconnecting with the application fails because a listener is already running on the same port on the remote machine.
How do I get around this issue? Does the ssh library allow me to define a timeout on the listener?
I'm just waiting for the timeout after reconnecting. I found no other easy solution for this.
The problem
I'm having an issue where when I start my local dev server with meteor, about 3/5 times the client's socksjs connection via ddp-client.js isn't able to connect and gets an ERR_CONNECTION_REFUSED error. All other connections work fine (websocket, JS, css, etc).
I'm seeing this in the console
The socks is attempting to connect to 192.168.1.14, which is my correct internal ip.
What I've tried
setting the port manually with meteor --port 3000
waiting for Meteor.status().status === 'connected' on the client before making any calls
If you'd like to recreate the problem yourself you can pull down the package I'm working on, ProseMeteor at commit 51c0a304338228102edc75427f72e689a7aafb8a and try running the app yourself by running the bash run_demo script, you should see the problem when you visit http://localhost:3000.
I appreciate any help!
I'm getting started with Meteor, using the examples:
https://www.meteor.com/examples/parties
If I deploy and load the deployment url ( http://radically-finished-parties-app.meteor.com/ ) , the app runs ... nothing magic there... it was an easy example
My issue occurs when I want to run it locally, I get the following message
"You are trying to access MongoDB on the native driver port. For http diagnostic access, add 1000 to the port number"
I got meteor running through the terminal command:
meteor --port 3004
Setup:
- Mac OS 10.9
- Chrome 31
This is happening because you are accessing the mongodb port in your web browser.
When you run a meteor app, e.g on port 3004
Port 3004 would be a web proxy to port 3005
Port 3005 would be the meteor app in a 'raw' sort of sense (without the websockets part.. i think)
Port 3006 would be the mongodb (which you are accessing).
Try using a different port. Or use a simpler port e.g just run meteor and access port 3000 in your web browser.
If the reason you moved the port number up because it said the port is in use the meteor app may not have exited properly on your computer. Restart your machine or have a look at activity monitor to kill the rogue node process.
I think what might have happened is you ran in on 3000, then moved the ports up and the previous one may have not been exited correctly so what you're seeing is a mongodb instance of a previous meteor instance.
This happens when you run another meteor on port 2999, forget about it and try to start a second instance on the usual port.
Try making sure Meteor is using the local embedded mongo db, which it will manage on its own:
export MONGO_URL=''
Something changed in my bash settings that I didn't copy over to zsh. I uninstalled zsh and meteor can now find and access mongo.
No way to have console wired with Heroku lately:
lsoave#ubuntu:~/rails/github/gitwatcher$ heroku run console
Running console attached to terminal...
Timeout awaiting process
lsoave#ubuntu:~/rails/github/gitwatcher$
Does it happen to anyone else ?
I had the same problem on the ISP FastWeb, which is an ISP here in Italy. Based on my Googling, it appears that they block port 5000.
To get around it for now, I am running the following:
heroku run:detached rake db:migrate
That tells it to run without waiting to connect to my machine on port 5000.
Then, you can examine the logs for your process you just kicked off. (The heroku command will tell you this after you run it):
heroku logs -p run.1
That tells it to output the logs for the running process.
But I found that the logs command was exiting even though my process was still running.
To get around that, you can add "-t" if you want to "tail" the logs:
heroku logs -p run.1 -t
You'll know your process is done when you see something like this in the logs:
2012-10-14T15:36:41+00:00 heroku[run.1]: Process exited with status 0
2012-10-14T15:36:41+00:00 heroku[run.1]: State changed from up to complete
I'm sure someone could whip up a script that would
Run the given heroku command with run:detached
Examine the output to determine what its process name was (run.1, run.2, etc)
run heroku logs -p run.1 -t and show me the output
exit the logs process when it sees something like State changed from up to complete
From: http://devcenter.heroku.com/articles/oneoff-admin-ps
The heroku run process opens a connection to Heroku on port 5000. If
your local network or ISP is blocking port 5000, or you are
experiencing a connectivity issue, you will see an error similar to:
$ heroku run rails console
Running rails console attached to terminal...
Timeout awaiting process
You can test your connection to Heroku by trying to connect directly
to port 5000 by using telnet to rendezvous.heroku.com. A successful
session will look like this:
$ telnet rendezvous.heroku.com 5000
Trying 50.19.103.36...
Connected to ec2-50-19-103-36.compute-1.amazonaws.com.
Escape character is '^]'.
If you do not get this output, your computer is being blocked from
accessing our services. We recommend contacting your IT department,
ISP, or firewall manufacturer to move forward with this issue.
There's a way to bypass this restriction by executing commands you were going to execute with 'heroku run ...' directly as system calls.
For this heroku command:
heroku run rake db:migrate
One could make a call in Ruby
system("rake db:migrate")
This call could be done as a result on some HTTP GET request - you better protect by some means, so that it wouldn't be accessible for strangers.
It's not a nice way - but when you don't have a choice - it works.
I had the same problem on the ISP FastWeb, which is an ISP here in Italy.
The most simple way to overcome the problem is set a VPN when you are using heroku run (something)
Personally I use Tunnel Bear that offer you 0.5GB of internet traffic for free
I've just connected successfully to a console on Heroku
Is it all apps or just a single one? I'd suggest checking your heroku gem is up to date, that you can run other commands like heroku ps, restart your application via heroku restart - if you've tried these then get in touch with Heroku support as something is wrong with your application.