Finding fairway and ports from ship track point using R - r

I have some data points from different ship include lon/lat, time and ID values recorded by AIS machine on ships, I want to use this points values to create line values which indicate the ship track, and then use track lines to find out fairway and ports.
Now I use trip package in R to build track data, however, in my data I find that data points from some ships may not continuous, sometimes the data points may lost in a segment track and sometimes the data points are "bad" points(the points in a track jump to a far away location), I need to filter the "bad" points and complete the lost points. When I use the function speedfilter in trip package to filter the "bad" points, there are two problems:
I set the max.speed, but a lot of points below this max.speed have been found out, is that the problem with CRS system?
The speedfilter function always find out the point next to the "bad" point and miss the "bad" point.


You can plot your lat/lng data as spatial lines using leaflet.
Concerning
max.speed: According to the manual of track points are tested for speed between previous / next and 2nd previous / next points. So I think what you observe is on purpose.
speedfilter: You should be able to solve the problem by always subtracting 1 from the index or shift the return vector.

Related

QGIS create intersections that the intersection plugin does not detect

I need to import a shape file of a drinking water network into a hydraulic software.
For this software I need intersections when lines are intersecting.
So I tried to create all intersections, but this did not bring the results I need.
Another degree of difficulty adds the fact that in hydraulic systems we have also crossing pipes, that have no connection with each other. So they would need to be excluded from the intersection. My first thought was to insert a limit length of 1-5cm for interecting lines. So if lines are crossing the limit length would be exceeded and the lines would not be intersected by the algorithm.
Can someone help me here? At least with the first step - creation of intersections?
Screenshot from one missing intersection

A large amount of points to create separate polygons (ArcGIS/QGIS)

Visual example of the data
I used a drone to create a DOF of a small area. During the flight, it takes a photo every 20sh seconds (40sh meters of a flight). I have created a CSV file, which I transferred to a point shapefile. In total, I made with drone 10 so-called "missions", each with 100-200 points which are "shaped" as squares on the map. What I want now is to create a polygon shapefile from the point shapefile.
Because those points sometimes overlap, I cannot use the "Aggregate Points" task, as it's only distance-based. I want to make polygons automatically, using some kind of script. What could help is the fact that a maximum time between two points (AKA photos taken) is 10-20 seconds, so if the time distance is over 3 minutes, it's another "mission". Can you help with such a script, that would quickly and automatically create as many polygons as there are missions?

Okay, I think I understand what you are trying to accomplish. Since no one replied I am going to give it a quick shot, so you have something to try.
I think the best strategy would be to:
Clustering algorithm: Try running a Clustering algorithm such as DBSCAN around the timestamp dimension to classify them based on time groups, instead of the distance (since, as you said, distance based separation is not enough to properly identify and separate the points). After which, you should have all the points classified between different groups with a column group id. Maximum distance parameter in the algorithm should be around 20 seconds steps, or even a minute (since you said each mission was separated at least about 3 minutes apart).
Feature based Polygon to point: At that point, then you run your generic Polygon_from_points(...) function that transforms these clustered points to polygons shapes based on a specific discriminant feature (which in your case is going to be each group id).
How does this work?: This would properly separate the groups first (time-based) and then you should be able to find a generic point to polygon based on a feature (Arcgis should have some).
I dont have an example dataset, nor any code written, but based on what you described I think it would work, hope it helps.

How to fix this line shape file?

I am creating a line from point shapefile which is auto generated. First time when I create that line in ArcGIS, I got a line like this because the points are not in a order:
after that I ordered the points according to it's location and got a line like this:
But unable to create a line like this:
Please give me any solution to fix this in ArcGIS or R programming. If you need the shapefile I can provide you.

I think there is no bullet proof way to restore the line, as same dataset can obviously represent different lines, so you would need to use some heuristics to do this. What Rafael described is very good top-bottom heuristics if you can reliably detect start and end points.
Another heuristics could be a bottom-up process to stitch nearby segments into a line. Find nearby points for every point, sort and connect the two nearest points. Continue this process, making sure each point has at most two connections, and that there are no loops.
A simpler approach that might just work if the line follows in general some direction is your idea of sorting points. But instead of ordering by x or y coordinate, find a linear approximation of these points, project each point to this straight line, and sort using the coordinate of the projection.

One way to go about this would be to treat it as a graph problem.
Create a weighted fully connected graph where the nodes are the points and the edge weight distance between its endpoints. Heuristically identify the “starting” and “ending” points of the line (for example, pick the bottom-leftmost point as start and top-rightmost and end).
Then you can use a shortest path algorithm to generate the order in which you connect the points.

segmenting lat/long data graph into lines/vectors

I have lat/lng data of multirotor UAV flights. There are alot of datapoints (~13k per flight) and I wish to find line segments from the data. They give me flight speed and direction. I know that most of the flights are guided missons meaning a point is given to fly to. However the exact points are unknown to me.
Here is a graph of a single flight lat/lng shifted to near (0,0) so they are visible on the same time-series graph.
I attempted to generate similar data, but there are several constraints and it may take more time to solve than working on the segmenting.
The graphs start and end nearly always at the same point.
Horisontal lines mean the UAV is stationary. These segments are expected.
Beginning and and end are always stationary for takeoff and landing.
There is some level of noise in the lines for the gps accuracy tho seemingly not that much.
Alot of data points.
The number of segments is unknown.
The noise I could calculate given the segments and least squares method to the line. Currently I'm thinking of sampling the data (to decimate it a little) and constructing lines. Merging the lines with smaller angle than x (dependant on the noise) and finding the intersection points of the lines left.
Another thought is to try and look at this problem in the frequency domain. The corners should be quite high frequency. Maybe I could make a custom filter kernel that would enable me to use a window function and win in efficency.
EDIT: Rewrote the question for more clarity and less rambling.

Adding plotstick-like arrows to a scatterplot

This is my first post here, thought i have read a lot of your Q&A these last 6 months. I'm currently working on ADCP (Aquatic Doppler Current Profiler) data, handled by the "oce" package from Dan Kelley (a little bit of advertising for those who want to deal with oceanographic datas in R). I'm not very experienced in R, and i have read the question relative to abline for levelplot functions "How to add lines to a levelplot made using lattice (abline somehow not working)?".
What i currently have is a levelplot representing a time series of echo intensity (from backscattered signal, which is monitored in the same time as current is) data taken in 10m of depth, this 10m depth line is parted into 25 rows, where each measurement is done along the line. (see the code part to obtain an image of what i have)
(unfortunately, my reputation doesn't allow me to post images).
I then proceed to generate an other plot, which represents arrows of the current direction as:
The length of each arrow gives an indication of the current strength
Its orientation is represented (all of this is done by taking the two components of the current intensity (East-West / North-South) and represent the resulting current).
There is an arrow drawn for each tick of time (thus for the 1000 columns of my example data, there are always two components of the current intensity).
Those arrows are drawn at the beginning of each measurement cell, thus at each row of my data, allowing to have a representation of currents for the whole water column.
You can see the code part to have a "as i have" representation of currents
The purpose of this question is to understand how i can superimpose those two representations, drawing my current arrows at each row of the represented data, thus making a representation of both current direction, intensity and echo intensity.
Here i can't find any link to describe what i mean, but this is something i have already seen.
I tried with the panel function which seems to be the best option, but my knowledge of R and the handeling of this kind of work is small, and i hope one of you may have the time and the knowledges to help me to solve this problem way faster than i could.
I am, of course, available to answer any questions or give precisions. I may ask a lot more, after working on a large code for 6 months, my thirst for learning is now large.
Code to represent data :
Here are some data to represent what I have:
U (north/south component of velocity) and V (East/west):
U1= c(0.043,0.042,0.043,0.026,0.066,-0.017,-0.014,-0.019,0.024,-0.007,0.000,-0.048,-0.057,-0.101,-0.063,-0.114,-0.132,-0.103,-0.080,-0.098,-0.123,-0.087,-0.071,-0.050,-0.095,-0.047,-0.031,-0.028,-0.015,0.014,-0.019,0.048,0.026,0.039,0.084,0.036,0.071,0.055,0.019,0.059,0.038,0.040,0.013,0.044,0.078,0.040,0.098,0.015,-0.009,0.013,0.038,0.013,0.039,-0.008,0.024,-0.004,0.046,-0.004,-0.079,-0.032,-0.023,-0.015,-0.001,-0.028,-0.030,-0.054,-0.071,-0.046,-0.029,0.012,0.016,0.049,-0.020,0.012,0.016,-0.021,0.017,0.013,-0.008,0.057,0.028,0.056,0.114,0.073,0.078,0.133,0.056,0.057,0.096,0.061,0.096,0.081,0.100,0.092,0.057,0.028,0.055,0.025,0.082,0.087,0.070,-0.010,0.024,-0.025,0.018,0.016,0.007,0.020,-0.031,-0.045,-0.009,-0.060,-0.074,-0.072,-0.082,-0.100,-0.047,-0.089,-0.074,-0.070,-0.070,-0.070,-0.075,-0.070,-0.055,-0.078,-0.039,-0.050,-0.049,0.024,-0.026,-0.021,0.008,-0.026,-0.018,0.002,-0.009,-0.025,0.029,-0.040,-0.006,0.055,0.018,-0.035,-0.011,-0.026,-0.014,-0.006,-0.021,-0.031,-0.030,-0.056,-0.034,-0.026,-0.041,-0.107,-0.069,-0.082,-0.091,-0.096,-0.043,-0.038,-0.056,-0.068,-0.064,-0.042,-0.064,-0.058,0.016,-0.041,0.018,-0.008,0.058,0.006,0.007,0.060,0.011,0.050,-0.028,0.023,0.015,0.083,0.106,0.057,0.096,0.055,0.119,0.145,0.078,0.090,0.110,0.087,0.098,0.092,0.050,0.068,0.042,0.059,0.030,-0.005,-0.005,-0.013,-0.013,-0.016,0.008,-0.045,-0.021,-0.036,0.020,-0.018,-0.032,-0.038,0.021,-0.077,0.003,-0.010,-0.001,-0.024,-0.020,-0.022,-0.029,-0.053,-0.022,-0.007,-0.073,0.013,0.018,0.002,-0.038,0.024,0.025,0.033,0.008,0.016,-0.018,0.023,-0.001,-0.010,0.006,0.053,0.004,0.001,-0.003,0.009,0.019,0.024,0.031,0.024,0.009,-0.009,-0.035,-0.030,-0.031,-0.094,-0.006,-0.052,-0.061,-0.104,-0.098,-0.054,-0.161,-0.110,-0.078,-0.178,-0.052,-0.073,-0.051,-0.065,-0.029,-0.012,-0.053,-0.070,-0.040,-0.056,-0.004,-0.032,-0.065,-0.005,0.036,0.023,0.043,0.078,0.039,0.019,0.061,0.025,0.036,0.036,0.062,0.048,0.073,0.037,0.025,0.000,-0.007,-0.014,-0.050,-0.014,0.007,-0.035,-0.115,-0.039,-0.113,-0.102,-0.109,-0.158,-0.158,-0.133,-0.110,-0.170,-0.124,-0.115,-0.134,-0.097,-0.106,-0.155,-0.168,-0.038,-0.040,-0.074,-0.011,-0.040,-0.003,-0.019,-0.022,-0.006,-0.049,-0.048,-0.039,-0.011,-0.036,-0.001,-0.018,-0.037,-0.001,0.033,0.061,0.054,0.005,0.040,0.045,0.062,0.016,-0.007,-0.005,0.009,0.044,0.029,-0.016,-0.028,-0.021,-0.036,-0.072,-0.138,-0.060,-0.109,-0.064,-0.142,-0.081,-0.032,-0.077,-0.058,-0.035,-0.039,-0.013,0.007,0.007,-0.052,0.024,0.018,0.067,0.015,-0.002,-0.004,0.038,-0.010,0.056)
V1=c(-0.083,-0.089,-0.042,-0.071,-0.043,-0.026,0.025,0.059,-0.019,0.107,0.049,0.089,0.094,0.090,0.120,0.169,0.173,0.159,0.141,0.157,0.115,0.128,0.154,0.083,0.038,0.081,0.129,0.120,0.112,0.074,0.022,-0.022,-0.028,-0.048,-0.027,-0.056,-0.027,-0.107,-0.020,-0.063,-0.069,-0.019,-0.055,-0.071,-0.027,-0.034,-0.018,-0.089,-0.068,-0.129,-0.034,-0.002,0.011,-0.009,-0.038,-0.013,-0.006,0.027,0.037,0.022,0.087,0.080,0.119,0.085,0.076,0.072,0.029,0.103,0.019,0.020,0.052,0.024,-0.051,-0.024,-0.008,0.011,-0.019,0.023,-0.011,-0.033,-0.101,-0.157,-0.094,-0.099,-0.106,-0.103,-0.139,-0.093,-0.098,-0.083,-0.118,-0.142,-0.155,-0.095,-0.122,-0.072,-0.034,-0.047,-0.036,0.014,0.035,-0.034,-0.012,0.054,0.030,0.060,0.091,0.013,0.049,0.083,0.070,0.127,0.048,0.118,0.123,0.099,0.097,0.074,0.125,0.051,0.107,0.069,0.040,0.102,0.100,0.119,0.087,0.077,0.044,0.091,0.020,0.010,-0.028,0.026,-0.018,-0.020,0.010,0.034,0.005,0.010,0.028,-0.043,0.025,-0.069,-0.003,0.004,-0.001,0.024,0.032,0.076,0.033,0.071,0.000,0.052,0.034,0.058,0.002,0.070,0.025,0.056,0.051,0.080,0.051,0.101,0.009,0.052,0.079,0.035,0.051,0.049,0.064,0.004,0.011,0.005,0.031,-0.021,-0.024,-0.048,-0.011,-0.072,-0.034,-0.020,-0.052,-0.069,-0.088,-0.093,-0.084,-0.143,-0.103,-0.110,-0.124,-0.175,-0.083,-0.117,-0.090,-0.090,-0.040,-0.068,-0.082,-0.082,-0.061,-0.013,-0.029,-0.032,-0.046,-0.031,-0.048,-0.028,-0.034,-0.012,0.006,-0.062,-0.043,0.010,0.036,0.050,0.030,0.084,0.027,0.074,0.082,0.087,0.079,0.031,0.003,0.001,0.038,0.002,-0.038,0.003,0.023,-0.011,0.013,0.003,-0.046,-0.021,-0.050,-0.063,-0.068,-0.085,-0.051,-0.052,-0.065,0.014,-0.016,-0.082,-0.026,-0.032,0.019,-0.026,0.036,-0.005,0.092,0.070,0.045,0.074,0.091,0.122,-0.007,0.094,0.064,0.087,0.063,0.083,0.109,0.062,0.096,0.036,-0.019,0.075,0.052,0.025,0.031,0.078,0.044,-0.018,-0.040,-0.039,-0.140,-0.037,-0.095,-0.056,-0.044,-0.039,-0.086,-0.062,-0.085,-0.023,-0.103,-0.035,-0.067,-0.096,-0.097,-0.060,0.003,-0.051,0.014,-0.002,0.054,0.045,0.073,0.080,0.096,0.104,0.126,0.144,0.136,0.132,0.160,0.155,0.136,0.080,0.144,0.087,0.093,0.103,0.151,0.165,0.146,0.159,0.156,0.002,0.023,-0.019,0.078,0.031,0.038,0.019,0.094,0.018,0.028,0.064,-0.052,-0.034,0.000,-0.074,-0.076,-0.028,-0.048,-0.025,-0.095,-0.098,-0.045,-0.016,-0.030,-0.036,-0.012,0.023,0.038,0.042,0.039,0.073,0.066,0.027,0.016,0.093,0.129,0.138,0.121,0.077,0.046,0.067,0.068,0.023,0.062,0.038,-0.007,0.055,0.006,-0.015,0.008,0.064,0.012,0.004,-0.055,0.018,0.042)
U2=c(0.022,0.005,-0.022,0.025,-0.014,-0.020,-0.001,-0.021,-0.008,-0.006,-0.056,0.050,-0.068,0.018,-0.106,-0.053,-0.084,-0.082,-0.061,-0.041,-0.057,-0.123,-0.060,-0.029,-0.084,-0.004,0.030,-0.021,-0.036,-0.016,0.006,0.088,0.088,0.079,0.063,0.097,0.020,-0.048,0.046,0.057,0.065,0.042,0.022,0.016,0.041,0.109,0.024,-0.010,-0.084,-0.002,0.004,-0.033,-0.025,-0.020,-0.061,-0.060,-0.043,-0.027,-0.054,-0.054,-0.040,-0.077,-0.043,-0.014,0.030,-0.051,0.001,-0.029,0.008,-0.023,0.015,0.002,-0.001,0.029,0.048,0.081,-0.022,0.040,0.018,0.131,0.059,0.055,0.043,0.027,0.091,0.104,0.101,0.084,0.048,0.057,0.044,0.083,0.063,0.083,0.079,0.042,-0.021,0.017,0.005,0.001,-0.033,0.010,-0.028,-0.035,-0.012,-0.034,-0.055,-0.009,0.001,-0.084,-0.047,-0.020,-0.046,-0.042,-0.058,-0.071,0.013,-0.045,-0.070,0.000,-0.067,-0.090,0.012,-0.013,-0.013,-0.009,-0.063,-0.047,-0.030,0.046,0.026,0.019,0.007,-0.056,-0.062,0.009,-0.019,-0.005,0.003,0.022,-0.006,-0.019,0.020,0.025,0.040,-0.032,0.015,0.019,-0.014,-0.031,-0.047,0.010,-0.058,-0.079,-0.052,-0.044,0.012,-0.039,-0.007,-0.068,-0.095,-0.053,-0.066,-0.056,-0.033,-0.006,0.001,0.010,0.004,0.011,0.013,0.029,-0.011,0.007,0.023,0.087,0.054,0.040,0.013,-0.006,0.076,0.086,0.103,0.121,0.070,0.074,0.067,0.045,0.088,0.041,0.075,0.039,0.043,0.016,0.065,0.056,0.047,-0.002,-0.001,-0.009,-0.029,0.018,0.041,0.002,-0.022,0.003,0.008,0.031,0.003,-0.031,-0.015,0.014,-0.057,-0.043,-0.045,-0.067,-0.040,-0.013,-0.111,-0.067,-0.055,-0.004,-0.070,-0.019,0.009,0.009,0.032,-0.021,0.023,0.123,-0.032,0.040,0.012,0.042,0.038,0.037,-0.007,0.003,0.011,0.090,0.039,0.083,0.023,0.056,0.030,0.042,0.030,-0.046,-0.034,-0.021,-0.076,-0.017,-0.071,-0.053,-0.014,-0.060,-0.038,-0.076,-0.011,-0.005,-0.051,-0.043,-0.032,-0.014,-0.038,-0.081,-0.021,-0.035,0.014,-0.001,0.001,0.003,-0.029,-0.031,0.000,0.048,-0.036,0.034,0.054,0.001,0.046,0.006,0.039,0.015,0.012,0.034,0.022,0.015,0.033,0.037,0.012,0.057,0.001,-0.014,0.012,-0.007,-0.022,-0.002,-0.008,0.043,-0.041,-0.057,-0.006,-0.079,-0.070,-0.038,-0.040,-0.073,-0.045,-0.101,-0.092,-0.046,-0.047,-0.023,-0.028,-0.019,-0.086,-0.047,-0.038,-0.068,-0.017,0.037,-0.010,-0.016,0.010,-0.005,-0.031,0.004,-0.034,0.005,0.006,-0.015,0.017,-0.043,-0.007,-0.009,0.013,0.026,-0.036,0.011,0.047,-0.025,-0.023,0.043,-0.020,-0.003,-0.043,0.000,-0.018,-0.075,-0.045,-0.063,-0.043,-0.055,0.007,-0.063,-0.085,-0.031,0.005,-0.067,-0.059,-0.059,-0.029,-0.014,-0.040,-0.072,-0.018,0.039,-0.006,-0.001,-0.015,0.038,0.038,-0.009,0.026,0.017,0.056)
V2=c(-0.014,0.001,0.004,-0.002,0.022,0.019,0.023,-0.023,0.030,-0.085,-0.007,-0.027,0.100,0.058,0.108,0.055,0.132,0.115,0.084,0.046,0.102,0.121,0.036,0.019,0.066,0.049,-0.011,0.020,0.023,0.011,0.041,0.009,-0.009,-0.023,-0.036,0.031,0.012,0.026,-0.011,0.009,-0.027,-0.033,-0.054,-0.004,-0.040,-0.048,-0.009,0.023,-0.028,0.022,0.090,0.060,0.040,0.003,-0.011,0.030,0.107,0.025,0.084,0.036,0.074,0.065,0.078,0.011,0.058,0.092,0.083,0.080,0.039,0.000,-0.027,0.035,0.011,0.004,0.023,-0.033,-0.060,-0.049,-0.101,-0.033,-0.105,-0.042,-0.088,-0.086,-0.093,-0.085,-0.028,-0.046,-0.045,-0.052,-0.009,-0.066,-0.073,-0.067,0.011,-0.057,-0.087,-0.066,-0.103,-0.075,0.003,-0.021,0.010,-0.013,0.021,0.020,0.084,0.028,0.127,0.050,0.104,0.097,0.075,0.021,0.057,0.095,0.080,0.077,0.086,0.110,0.054,0.016,0.105,0.065,0.046,0.047,0.072,0.058,0.092,0.063,0.033,0.087,0.036,0.049,0.093,0.008,0.064,0.068,0.040,0.049,0.035,0.042,0.045,0.021,0.056,0.007,0.026,0.067,0.046,0.088,0.084,0.070,0.037,0.079,0.065,0.074,0.077,0.023,0.094,0.061,0.096,0.068,0.067,0.091,0.061,0.069,0.090,0.046,0.057,0.011,-0.018,0.005,0.001,-0.023,-0.087,0.010,0.023,-0.025,-0.040,-0.059,-0.063,-0.075,-0.136,-0.078,-0.102,-0.128,-0.116,-0.091,-0.136,-0.083,-0.115,-0.063,-0.055,-0.080,-0.093,-0.099,-0.053,-0.042,-0.011,-0.034,-0.027,-0.042,-0.022,-0.008,-0.033,-0.039,-0.036,0.019,0.036,-0.002,0.000,-0.021,0.060,0.030,0.073,0.080,0.061,0.046,0.062,0.010,0.034,0.103,0.107,0.016,0.080,0.067,0.007,0.060,0.021,-0.026,0.008,0.051,0.030,0.001,-0.036,-0.047,0.000,0.006,0.006,0.013,0.009,0.019,0.009,-0.086,-0.020,0.018,0.039,0.014,0.011,0.052,0.031,0.095,0.047,0.065,0.114,0.086,0.102,0.037,0.039,0.060,0.024,0.091,0.058,0.065,0.060,0.045,0.031,0.062,0.047,0.043,0.057,0.032,0.057,0.051,0.019,0.056,0.024,-0.003,0.023,-0.013,-0.032,-0.022,-0.064,-0.021,-0.050,-0.063,-0.090,-0.082,-0.076,-0.077,-0.042,-0.060,-0.010,-0.060,-0.069,-0.028,-0.071,-0.046,-0.020,-0.074,0.080,0.071,0.065,0.079,0.065,0.039,0.061,0.154,0.072,0.067,0.133,0.106,0.080,0.047,0.053,0.110,0.080,0.122,0.075,0.052,0.034,0.081,0.118,0.079,0.101,0.053,0.082,0.036,0.033,0.026,0.002,-0.002,0.020,0.087,0.021,0.034,0.003,-0.021,0.016,-0.009,-0.045,-0.043,-0.020,0.027,0.008,-0.006,0.043,0.045,0.014,0.053,0.083,0.113,0.091,0.028,0.060,0.040,0.019,0.114,0.126,0.090,0.046,0.089,0.029,0.030,0.010,0.045,0.040,0.072,-0.033,-0.008,0.014,-0.018,-0.004,-0.037,0.015,-0.021,-0.015)
bindistances=c(1.37,1.62,1.87,2.12,2.37,2.62,2.87,3.12,3.37,3.62,3.87,4.12,4.37,4.62,4.87,5.12,5.37,5.62,5.87,6.12,6.37,6.62,6.87,7.12,7.37,7.62,7.87,8.12)
Then, as a representation of currents:
AA=14
x11()
par(mfrow=c(4,1))
plotSticks(x=seq(from=(1),
to=(377),
by=(1)),
u=U1,
v=V1,
yscale=ysc,xlab='',ylab='',xaxt='n',yaxt='n',col=(rep('black',384)))
axis(side=1)
plotSticks(x=seq(from=(1),
to=(377),
by=(1)),
u=U2,
v=V2,
yscale=ysc,xlab='',ylab='',xaxt='n',yaxt='n',col=(rep('black',384)))
plotSticks(x=seq(from=(1),
to=(377),
by=(1)),
u=U2,
v=V2,
yscale=ysc,xlab='',ylab='',xaxt='n',yaxt='n',col=(rep('black',384)))
plotSticks(x=seq(from=(1),
to=(377),
by=(1)),
u=U2,
v=V2,
yscale=ysc,xlab='',ylab='',xaxt='n',yaxt='n',col=(rep('black',384)))
In order to simplify the representation, the three last plots are based on the same data.

Resources