I want to generate some Weibull random numbers in a given interval. For example 20 random numbers from the Weibull distribution with shape 2 and scale 30 in the interval (0, 10).
rweibull function in R produce random numbers from a Weibull distribution with given shape and scale values. Can someone please suggest a method? Thank you in advance.
Use the distr package. It allows to do this kind of stuff very easily.
require(distr)
#we create the distribution
d<-Truncate(Weibull(shape=2,scale=30),lower=0,upper=10)
#The d object has four slots: d,r,p,q that correspond to the [drpq] prefix of standard R distributions
#This extracts 10 random numbers
d#r(10)
#get an histogram
hist(d#r(10000))
Using base R you can generate random numbers, filter which drop into target interval and generate some more if their quantity appears to be less than you need.
rweibull_interval <- function(n, shape, scale = 1, min = 0, max = 10) {
weib_rnd <- rweibull(10*n, shape, scale)
weib_rnd <- weib_rnd[weib_rnd > min & weib_rnd < max]
if (length(weib_rnd) < n)
return(c(weib_rnd, rweibull_interval(n - length(weib_rnd), shape, scale, min, max))) else
return(weib_rnd[1:n])
}
set.seed(1)
rweibull_interval(20, 2, 30, 0, 10)
[1] 9.308806 9.820195 7.156999 2.704469 7.795618 9.057581 6.013369 2.570710 8.430086 4.658973
[11] 2.715765 8.164236 3.676312 9.987181 9.969484 9.578524 7.220014 8.241863 5.951382 6.934886
Related
tldr: I am numerically estimating a PDF from simulated data and I need the density to monotonically decrease outside of the 'main' density region (as x-> infinity). What I have yields a close to zero density, but which does not monotonically decrease.
Detailed Problem
I am estimating a simulated maximum likelihood model, which requires me to numerically evaluate the probability distribution function of some random variable (the probability of which cannot be analytically derived) at some (observed) value x. The goal is to maximize the log-likelihood of these densities, which requires them to not have spurious local maxima.
Since I do not have an analytic likelihood function I numerically simulate the random variable by drawing the random component from some known distribution function, and apply some non-linear transformation to it. I save the results of this simulation in a dataset named simulated_stats.
I then use density() to approximate the PDF and approxfun() to evaluate the PDF at x:
#some example simulation
Simulated_stats_ <- runif(n=500, 10,15)+ rnorm(n=500,mean = 15,sd = 3)
#approximation for x
approxfun(density(simulated_stats))(x)
This works well within the range of simulated simulated_stats, see image:
Example PDF. The problem is I need to be able to evaluate the PDF far from the range of simulated data.
So in the image above, I would need to evaluate the PDF at, say, x=50:
approxfun(density(simulated_stats))(50)
> [1] NA
So instead I use the from and to arguments in the density function, which correctly approximate near 0 tails, such
approxfun(
density(Simulated_stats, from = 0, to = max(Simulated_stats)*10)
)(50)
[1] 1.924343e-18
Which is great, under one condition - I need the density to go to zero the further out from the range x is. That is, if I evaluated at x=51 the result must be strictly smaller. (Otherwise, my estimator may find local maxima far from the 'true' region, since the likelihood function is not monotonic very far from the 'main' density mass, i.e. the extrapolated region).
To test this I evaluated the approximated PDF at fixed intervals, took logs, and plotted. The result is discouraging: far from the main density mass the probability 'jumps' up and down. Always very close to zero, but NOT monotonically decreasing.
a <- sapply(X = seq(from = 0, to = 100, by = 0.5), FUN = function(x){approxfun(
density(Simulated_stats_,from = 0, to = max(Simulated_stats_)*10)
)(x)})
aa <- cbind( seq(from = 0, to = 100, by = 0.5), a)
plot(aa[,1],log(aa[,2]))
Result:
Non-monotonic log density far from density mass
My question
Does this happen because of the kernel estimation in density() or is it inaccuracies in approxfun()? (or something else?)
What alternative methods can I use that will deliver a monotonically declining PDF far from the simulated density mass?
Or - how can I manually change the approximated PDF to monotonically decline the further I am from the density mass? I would happily stick some linear trend that goes to zero...
Thanks!
One possibility is to estimate the CDF using a beta regression model; numerical estimate of the derivative of this model could then be used to estimate the pdf at any point. Here's an example of what I was thinking. I'm not sure if it helps you at all.
Import libraries
library(mgcv)
library(data.table)
library(ggplot2)
Generate your data
set.seed(123)
Simulated_stats_ <- runif(n=5000, 10,15)+ rnorm(n=500,mean = 15,sd = 3)
Function to estimate CDF using gam beta regression model
get_mod <- function(ss,p = seq(0.02, 0.98, 0.02)) {
qp = quantile(ss, probs=p)
betamod = mgcv::gam(p~s(qp, bs="cs"), family=mgcv::betar())
return(betamod)
}
betamod <- get_mod(Simulated_stats_)
Very basic estimate of PDF at val given model that estimates CDF
est_pdf <- function(val, betamod, tol=0.001) {
xvals = c(val,val+tol)
yvals = predict(betamod,newdata=data.frame(qp = xvals), type="response")
as.numeric((yvals[1] - yvals[2])/(xvals[1] - xvals[2]))
}
Lets check if monotonically increasing below min of Simulated_stats
test_x = seq(0,min(Simulated_stats_), length.out=1000)
pdf = sapply(test_x, est_pdf, betamod=betamod)
all(pdf == cummax(pdf))
[1] TRUE
Lets check if monotonically decreasing above max of Simulated_stats
test_x = seq(max(Simulated_stats_), 60, length.out=1000)
pdf = sapply(test_x, est_pdf, betamod=betamod)
all(pdf == cummin(pdf))
[1] TRUE
Additional thoughts 3/5/22
As discussed in comments, using the betamod to predict might slow down the estimator. While this could be resolved to a great extent by writing your own predict function directly, there is another possible shortcut.
Generate estimates from the betamod over the range of X, including the extremes
k <- sapply(seq(0,max(Simulated_stats_)*10, length.out=5000), est_pdf, betamod=betamod)
Use the approach above that you were initially using, i.e. a linear interpolation across the density, but rather than doing this over the density outcome, instead do over k (i.e. over the above estimates from the beta model)
lin_int = approxfun(x=seq(0,max(Simulated_stats_)*10, length.out=5000),y=k)
You can use the lin_int() function for prediction in the estimator, and it will be lighting fast. Note that it produces virtually the same value for a given x
c(est_pdf(38,betamod), lin_int(38))
[1] 0.001245894 0.001245968
and it is very fast
microbenchmark::microbenchmark(
list = alist("betamod" = est_pdf(38, betamod),"lin_int" = lint(38)),times=100
)
Unit: microseconds
expr min lq mean median uq max neval
betamod 1157.0 1170.20 1223.304 1188.25 1211.05 2799.8 100
lin_int 1.7 2.25 3.503 4.35 4.50 10.5 100
Finally, lets check the same plot you did before, but using lin_int() instead of approxfun(density(....))
a <- sapply(X = seq(from = 0, to = 100, by = 0.5), lin_int)
aa <- cbind( seq(from = 0, to = 100, by = 0.5), a)
plot(aa[,1],log(aa[,2]))
I have a equation y=9x+6. I want to extract 10 random points from this function. How should I proceed?
Generate 10 random x-values, in this example uniformly distributed (function runif), and then calculate the corresponding y-values following your equation.
You can control the x-range by setting different min and max parameters to function runif.
x <- runif(10, min = 0, max = 1)
y <- 9*x+6
plot(x,y)
I apply the sensitivity package in R. In particular, I want to use sobolroalhs as it uses a sampling procedure for inputs that allow for evaluations of models with a large number of parameters. The function samples uniformly [0,1] for all inputs. It is stated that desired distributions need to be obtained as follows
####################
# Test case: dealing with non-uniform distributions
x <- sobolroalhs(model = NULL, factors = 3, N = 1000, order =1, nboot=0)
# X1 follows a log-normal distribution:
x$X[,1] <- qlnorm(x$X[,1])
# X2 follows a standard normal distribution:
x$X[,2] <- qnorm(x$X[,2])
# X3 follows a gamma distribution:
x$X[,3] <- qgamma(x$X[,3],shape=0.5)
# toy example
toy <- function(x){rowSums(x)}
y <- toy(x$X)
tell(x, y)
print(x)
plot(x)
I have non-zero mean and standard deviations for some input parameter that I want to sample out of a normal distribution. For others, I want to uniformly sample between a defined range (e.g. [0.03,0.07] instead [0,1]). I tried using built in R functions such as
SA$X[,1] <- rnorm(1000, mean = 579, sd = 21)
but I am afraid this procedure messes up the sampling design of the package and resulted in odd results for the sensitivity indices. Hence, I think I need to adhere for the uniform draw of the sobolroalhs function in which and use the sampled value between [0, 1] when drawing out of the desired distribution (I think as density draw?). Does this make sense to anyone and/or does anyone know how I could sample out of the right distributions following the syntax from the package description?
You can specify mean and sd in qnorm. So modify lines like this:
x$X[,2] <- qnorm(x$X[,2])
to something like this:
x$X[,2] <- qnorm(x$X[,2], mean = 579, sd = 21)
Similarly, you could use the min and max parameters of qunif to get values in a given range.
Of course, it's also possible to transform standard normals or uniforms to the ones you want using things like X <- 579 + 21*Z or Y <- 0.03 + 0.04*U, where Z is a standard normal and U is standard uniform, but for some distributions those transformations aren't so simple and using the q* functions can be easier.
I have the following likelihood function which I used in a rather complex model (in practice on a log scale):
library(plyr)
dcustom=function(x,sd,L,R){
R. = (log(R) - log(x))/sd
L. = (log(L) - log(x))/sd
ll = pnorm(R.) - pnorm(L.)
return(ll)
}
df=data.frame(Range=seq(100,500),sd=rep(0.1,401),L=200,U=400)
df=mutate(df, Likelihood = dcustom(Range, sd,L,U))
with(df,plot(Range,Likelihood,type='l'))
abline(v=200)
abline(v=400)
In this function, the sd is predetermined and L and R are "observations" (very much like the endpoints of a uniform distribution), so all 3 of them are given. The above function provides a large likelihood (1) if the model estimate x (derived parameter) is in between the L-R range, a smooth likelihood decrease (between 0 and 1) near the bounds (of which the sharpness is dependent on the sd), and 0 if it is too much outside.
This function works very well to obtain estimates of x, but now I would like to do the inverse: draw a random x from the above function. If I would do this many times, I would generate a histogram that follows the shape of the curve plotted above.
The ultimate goal is to do this in C++, but I think it would be easier for me if I could first figure out how to do this in R.
There's some useful information online that helps me start (http://matlabtricks.com/post-44/generate-random-numbers-with-a-given-distribution, https://stats.stackexchange.com/questions/88697/sample-from-a-custom-continuous-distribution-in-r) but I'm still not entirely sure how to do it and how to code it.
I presume (not sure at all!) the steps are:
transform likelihood function into probability distribution
calculate the cumulative distribution function
inverse transform sampling
Is this correct and if so, how do I code this? Thank you.
One idea might be to use the Metropolis Hasting Algorithm to obtain a sample from the distribution given all the other parameters and your likelihood.
# metropolis hasting algorithm
set.seed(2018)
n_sample <- 100000
posterior_sample <- rep(NA, n_sample)
x <- 300 # starting value: I chose 300 based on your likelihood plot
for (i in 1:n_sample){
lik <- dcustom(x = x, sd = 0.1, L = 200, R =400)
# propose a value for x (you can adjust the stepsize with the sd)
x.proposed <- x + rnorm(1, 0, sd = 20)
lik.proposed <- dcustom(x = x.proposed, sd = 0.1, L = 200, R = 400)
r <- lik.proposed/lik # this is the acceptance ratio
# accept new value with probablity of ratio
if (runif(1) < r) {
x <- x.proposed
posterior_sample[i] <- x
}
}
# plotting the density
approximate_distr <- na.omit(posterior_sample)
d <- density(approximate_distr)
plot(d, main = "Sample from distribution")
abline(v=200)
abline(v=400)
# If you now want to sample just a few values (for example, 5) you could use
sample(approximate_distr,5)
#[1] 281.7310 371.2317 378.0504 342.5199 412.3302
I have got n>2 independent continuous Random Variables(RV). For example say I have 4 Uniform RVs with different set of Upper and lowers.
W~U[-1,5], X~U[0,1], Y~[0,2], Z~[0.5,2]
I am trying to find out the approximate PDF for the sum of these RVs i.e. for T=W+X+Y+Z. As I don't need any closed form solution, I have sampled 1 million points for each of them to get 1 million samples for T. Is it possible in R to get the approximate PDF function or a way to get approximate probability of P(t<T)from this samples I have drawn. For example is there a easy way I can calculate P(0.5<T) in R. My priority here is to get probability first even if getting the density function is not possible.
Thanks
Consider the ecdf function:
set.seed(123)
W <- runif(1e6, -1, 5)
X <- runif(1e6, 0, 1)
Y <- runif(1e6, 0, 2)
Z <- runif(1e6, 0.5, 2)
T <- Reduce(`+`, list(W, X, Y, Z))
cdfT <- ecdf(T)
1 - cdfT(0.5) # Pr(T > 0.5)
# [1] 0.997589
See How to calculate cumulative distribution in R? for more details.