I have been using git for last couple of months in my asp.net application and it works perfectly fine.
Today I got an error while executing command:
git add *
Error:
warning: LF will be replaced by CRLF in Source Code/Bin/itextsharp.xml.
The file will have its original line endings in your working directory.
error: readlink("Source Code/aspnet_client"): Function not implemented
error: unable to index file Source Code/aspnet_client
fatal: adding files failed
Looks like you are trying to add links. Git has problems with adding symlinks on Window.
There is not much you can do with is rather then commiting in unix machine or try from git bash instead of the cmd.
Related
That is:
hashanp#DESKTOP-9E00J4S: ~/cats-cakes$ git add .
error: open("img/cake.jpg"): Permission denied
error: unable to index file img/cake.jpg
fatal: adding files failed
Trying to add image in Git add but keep getting the following message? I tried restarting/reloading git and closing VS Code but nothing worked.
That looks like a git bash session on Windows, or a WSL session.
If you can not easily identify the process which keeps an handle to that file, preventing another program (like git) to access it, I would:
reboot
restart my git bash or WSL2 session
try to add img/cake.jpg before opening any IDE.
Since it is an Ubuntu session, I would also try, for tesdting:
sudo chmod -R 755 img
That way, the folder img will be accessible.
I am trying to start doing the Pintos Stanford project on Ubuntu. I downloaded the tar file that the Stanford website provides but when I try and run
pintos -- run alarm-multiple
I get the following error:
Unrecognized character \x16; marked by <-- HERE after if ($<-- HERE near column 7 at /home/adambomb/src/pintos/src/utils/pintos line 911
I found on another stackoverflow post that I should pull from latest version of pintos:
git clone git://pintos-os.org/pintos-anon pintos
But doing this gets me an error:
Cloning into 'pintos'...
fatal: read error: Connection reset by peer
I'm not really sure where to go from here and could use some insight to fix either of these problems.
I don't really know where to go from here.
I ran into the same issues as you trying various guides on the internet (eg. this guide) and looking through StackOverflow. However, this youtube video helped me the most.
Steps below can be found here. I'm using Ubuntu 18.04.
Run sudo apt-get install qemu
Get latest pintos source code from pintos public git repository or download older version with this link
2a. Under heads, find master and click the tree hyperlink
2b. Click snapshot and download the .tar.gz file to your directory
Run tar -xvzf pintos-anon-master-{value}.tar.gz where {value} is the commit-id
Open /utils/pintos-gdb with vim and edit GDBMACROS variable to point to the full path for pintos directory
Open Makefile with vim and edit LOADLIBES variable name to LDLIBS
Compile utils directory by navigating to /src/utils and running make
Edit /src/threads/Make.vars (line 7): change bochs to qemu
Compile threads directory by navigating to /src/threads and running make
Edit /utils/pintos (line 103): replace bochs with qemu
Edit /utils/pintos (~line 257): replace kernel.bin with the full path to kernel.bin
Edit /utils/pintos (~line 621): replace qemu with qemu-system-x86_64
Edit /utils/Pintos.pm (line 362): replace loader.bin with the full path to loader.bin
Open ~/.bashrc and add export PATH=/home/.../pintos/src/utils:$PATH to the last line.
Reload terminal by running source ~/.bashrc
Run pintos with pintos run alarm-multiple
I am trying to use gdb with R. My gdb command seems to work fine with executable (written in C) but I encounter some issue when I use gdb in R.
I did
sudo R -d gdb
In case it matters, the reason for using the sudo command can be found in this post (see most upvoted but not accepted answer) (I am on MAC OSX 10.11.3).
Right before the (gdb) prompt, it says:
Reading symbols from /Library/Frameworks/R.framework/Resources/bin/exec/R...
warning: `/Builds/CRAN-QA-Simon/R-build/mavericks-x86_64/R-3.2.3/src/main/Rmain.o': can't open to read symbols: No such file or directory.
(no debugging symbols found)...done.
I can confirm this file does not exist, I don't even have a /Builds directory. When I enter run, then a very long list of [..] can't open to read symbols: No such file or directory appears.
How can I debug this issue and make gdb work with R?
I'm trying to create a batch file to run an R script for me automatically on Windows 7.
Batch file:
"C:\Program Files\R\R-3.2.3\bin\Rscript.exe" CMD BATCH "C:\Users\<my username>\Documents\R\Script Testing\script.R"
pause
R script:
write.csv("hello", "automatic_output.txt")
This script works when I run it in R, but when I try to run the .bat, I get this error:
Fatal error: cannot open file 'CMD': No such file or directory
This happens regardless of whether I paste the code into the command prompt, run the .bat as administrator, or schedule the task.
I tried following the advice given in this thread:
Exporting .csv from R & Batch file
but am seeing the same behavior.
I also used the Windows search to try to find "automatic_output.txt" in case it was being stored in an unexpected location but no results came up.
Lastly,
https://stackoverflow.com/a/23514987 seemed to suggest that I could omit the "CMD BATCH", and when I do I no longer get an error, but automatic_output.txt is still not produced.
Any ideas?
As Thomas pointed out, I needed to change "Rscript.exe" to "R.exe". For future googlers, here is the line of code that worked:
"C:\Program Files\R\R-3.2.3\bin\R.exe" CMD BATCH "C:\Users\<my username>\Documents\R\Script Testing\script.R"
When I create a new project and select to create a new Git repository, or when I try to change the version control system in project options I receive a RStudio error stating "Incorrect function" with a big X and no extra information.
The below link has a similar issue, but their solution of changing the path for git.exe has not helped (i have tried all three paths)
https://support.rstudio.com/hc/en-us/community/posts/200632528-Git-Error-Incorrect-Function
Some extra notes:
RStudio allows me to clone repository to set new working directory
Also git works in bash, so i feel this is an RStudio issue.
I encountered the same error. For me it also had to do with using a network path not a local directory for the project location (as for lewis1211).
Workaround: Map the network drive. E.g. Map your //server/share to some drive, say Z: (using map network drive, if you are using windows). If you set your project up under Z: then, it works.
If you have already chosen "git.exe" in RStudio --> Tools --> Global Options --> Git/SVN, then try to open Rstudio shell and type git init. In my case it showed "Permission denied", and after running as administrator the problem has gone.
This is only a partial answer if it fixes your problem: I reproduced this when trying to use a network path for a project location. When using a local directory no error occurs. Could indeed be an RStudio issue.
Run you R studio as Project administration.
This solves my issue.
SOLVED.
I had the same problem. The Git-RStudio-Connection fails but git is working perfectly in the CMD. When running the git init command in CMD it works and creates a .git folder. But running the git init command in the RStudio terminal fails with a message Warning: unable to access 'C:/Users/%username%/.gitconfig': Permission denied ... fatal: unknown error occured while reading the configuration files.
The Version Control Sytem (VCS) or git-Panel does not appear in RStudio and selecting it in the projects options leads to the same message Error: Unzulässige Function (eng. Error: Incorrect function).
A closer look into the .gitconfig file should give you a new solution approach hopefully without having administration rights. Comparing the installation on the integration worksation with a productive workstation shows, that on the Test-Machine an incomplete .gitconfig file is on C:/Users/%username%/.gitconfig and on the Productive-Machine a complete gitconfig file is on Z:/.gitconfig. By the way, Z is a mapped drive which is linking to the company's user-profile settings (see CMD > echo %HOMEDRIVE%).
According to this analysis there should be multiple possible solution approaches:
(1) delete the corrupt .gitconfig and hope the the system is correctly looking into your profiles directory
(2) complete the .gitconfig file that all necessary information are there. The message fatal: unknown error occured while reading the configuration files could actually be a hint, that the first message access... permission denied is false and the problem lies in the incomplete file.
(3) Be aware that there can be a confusion between ".gitconfig" as FILE and ".gitconfig" as FOLDER. Check this with changing directory with cd to folder and cat to show the file content. It will tell you that you cannot display a folder as file-content.
(4) Change the location of the config file with git config --file FullnameToGitconfig. e.g. git config --file %USERPROFILE%/.gitconfig or git config --file %USERPROFILE%/.gitconfig/gitconfig or git config --file %HOMEDRIVE%/.gitconfig etc.
[user]
name = DOE John
email = john.doe#acme.com
[merge]
tool = kdiff3
[mergetool "kdiff3"]
path = C:/Program Files/KDiff3/kdiff3.exe
[diff]
guitool = kdiff3
[difftool "kdiff3"]
path = C:/Program Files/KDiff3/kdiff3.exe
[core]
editor = \"C:/Program Files (x86)/GitExtensions/GitExtensions.exe\" fileeditor