I have recently setup forgot password functionality on my site using the stock symfony2 implementation.
Problem is my reset password email gets sent to my junk folder.
What causes this? Is it the content of the email itself?
Here it is:
Hello myemail#hotmail.com!
To reset your password - please visit http://application.mysite.com/resetting/reset/yLbv6BLD6ItSlmXSl4tFI7la78Es5UnS1GqvJnN_5uR
Regards,
the Team.
Could it be something in my settings?
There is a lot of possibilities that can cause this problem.
It's most often coming from the server (e-mail) configuration.
Look at the "original message" (with headers) to see if there is no explicit problem, but it's very difficult to debug.
Look at your email configuration (postfix local ? gmail ?), search for working examples and hopes you find the problem, especially if it's your production server.
Good luck
There can be lot of reasons:
you send emails from shared IP segment
to low ammount of text in your message
spammy look sender email address (for example "noreply#...")
subject of message
url thas point somwhere to testing environment (for example 127.0.0.1)
Try to change these, and experiment...
Related
I'm trying to create a Service that Scraping websites by using Google Cached Pages.
Example
https://webcache.googleusercontent.com/search?q=cache:nike.com
The Response that I get is the HTML from Google cache, which is an older version of the Nike site.
And it works fine as long as I run it locally on my computer,
but when I deploy to google cloud platform, there I use porxy server
I get a 403 error that I can not access the information through a porxy server
Example of response from proxy server
433. That’s an error.Your client does not have permission to get URL /s
earch?q=cache:http://nike.com from this server. (Client IP address: XX.XXX.XX.XXX)<br
Please see Google's Terms of Service posted at
https://policies.google.com/terms If you believe that you
have received this response in error, please report your
problem. However, please make sure to take a look at our Terms of
Service (http://www.google.com/terms_of_service.html). In your email,
please send us the entire code displayed below. Please also
send us any information you may know about how you are performing your
Google searches-- for example, "I' m using the Opera browser on Linux
to do searches from home. My Internet access is through a dial-up
account I have with the FooCorp ISP." or "I'm using the Konqueror
browser on Linux t o search from my job at myFoo.com. My machine's IP
address is 10.20.30.40, but all of myFoo' s web traffic goes through
some kind of proxy server whose IP address is 10.11.12.13." (If y ou
don't know any information like this, that's OK. But this kind of
information can help us track down problems, so please tell us what
you can.)We will use all this information to diagnose the
problem, and we'll hopefully have you back up and searching with
Google agai n quickly! Please note that although we read all
the email we receive, we are not always able to send a personal
response to each and every email. So don't despair if you don't hear
back from u s! Also note that if you do not send us the
entire code below, we will not be able to help
you.Best wishes,The Google
Article that talks about the problem https://proxyserver.com/web-scraping-crawling/scraping-websites-via-google-cached-pages/
How can I solve this problem, and run requests from the cloud as well without being blocked? Add parameters?
Thanks :)
I guess that you should add a property in the header of your http request
for example :
URL u = new URL("https://www.google.com//search?q=c");
URLConnection c = u.openConnection();
c.setRequestProperty("User-Agent", "MSIE 7.0");
or
HttpRequest request =HttpRequest.newBuilder(new URI("https://www.google.com//search?q=c")).header("User-Agent", "MSIE 7.0").GET().build();
// note to change the URI
this two examples are in Java but the same concept is applied in all environments I guess
hope that was helpfull
I have a personal website: https://www.${DOMAIN-NAME}.web.app (advertising my real site may annoy some people)
This web app is working fine on my devices. I sent this link to my friend and it's showing him "ERR CERT COMMON NAME INVALID" error page. He is on a very secure computer.
Here is a screenshot of the error page:
I found one solution to this along with a process to recreate this error page. I went on a new device that has never visited my web app. Then, I wrote http://www.${DOMAIN-NAME}.web.app ("http" here) and got this error page. Changing from "http" to "https" here doesn't help. However, I solved this by closing the tab, and writing https://www.${DOMAIN-NAME}.web.app on a new tab. This immediately establishes the green secure lock.
However, this didn't help my friend. Is there something that I don't know that's causing this issue? I'll await any helpful answers. Regards,
You cannot add a www. in front of a Firebase Hosting .web.app domain. That's why you're seeing invalid cert. Try just https://${DOMAIN-NAME}.web.app.
I want to forward all mail for root (so basically the output of all cron jobs but other mails for root as well) to an external email address (hotmail).
Easiest method would be to use the aliases file. I updated the root alias:
root: mymail#hotmail.com
And ran newaliases.
When an email is sent I see that the hotmail MX server "accepts" my mail. Standard MS Security through obscurity makes me think it's silently discarding my email ( not in junk mail, ... ).
This server is used to send/receive mail for a domain (and more domains in the future).
I've checked the logs and it seems the mail is sent with from field of : root#mail.domain.com
I'm pretty sure this is at the root of my mail never received in my hotmail.
The existing email addresses are using user#domain.com as from.
Now I would like to rewrite this (mail) from address/ctladdr.
I thought this would be an easy fix with genericstable.
Genericstable (had multiple tries):
root info#domain.com
root#localhost info#domain.com
root#mail.domain.com info#domain.com
Regenerated the db with makemap.
I tried with different settings.
I also removed the EXPOSED_USER root (from the generic m4 file). I can see it's not in the generated cf file.
I also added root to the trusted users.
In my m4 file:
FEATURE(genericstable)dnl
GENERICS_DOMAIN(domain.com)dnl
dnl GENERICS_DOMAIN(mail.domain.com)dnl
dnl GENERICS_DOMAIN_FILE(`/etc/mail/generics-domains')dnl
FEATURE(masquerade_envelope)dnl
dnl define(`LOCAL_RELAY', `localhost')dnl
I have a submit mc file as well. Not sure if this matters but I don't think so.
(I don't have sendmail in MSP mode running as far as I know).
I've tried with GENERICS_DOMAIN as the domain that I want it to be or the domain that I want to be rewritten.
make all install
and restarted sendmail.
Still it just seems to go out as root#mail.domain.com
I tried with sendmail in address test mode (bt; tryflags hs and try esmtp root). This correctly modifies to the wanted source address: info#domain.com.
Anyone has some other ideas why this is not working? Or more debugging ways?
Do I need local_relay to make this work? What's expected to be in the hosts file? Fqdn(mail.domain.com) and hostname(so mail) for 127.0.0.1 ?
EDIT: I probably should mention that I have an incoming queue for MailScanner.
Thanks a lot in advance!
I believe the source of my issue is that I was expecting all mailserver mentioned in the headers to have the mail.example.com removed.
However the first header is to submit it to the local queue.
And only when Sendmail is sending the mail out (connecting to the outside MX of example.com) the translation gets done.
So the servers mentioned in the headers stay with mail.example.com.
I thought the mail.example.com was the culprit in hotmail not delivering my email. Which seemed to be wrong.
After investigating for a long time I noticed that if I sent an email from info#example.com to hotmail it was nowhere shown(no, not even in spam, ...) while it was accepted.
If I sent an email first to info#example.com and then sent one back from info#example.com the mail gets successfully delivered in the hotmail mailbox.
This also seems to be the case with other users of the same example.com domain (so not solely with info#).
After some more investigating I noticed: html email seems to be more easily delivered(sent through squirrelmail). Plain text only mails seem to be ignored.
NOTE: in all cases my mail was accepted by the hotmail mailserver. So no error code 550 or something. I was always sending mail from the mail.example.com server (either command line or through Squirrelmail).
EDIT: I had yet another annoying encounter with Hotmail. Again my message is accepted and just disappears. I've been sending to this destination address before without any issues. But for some reason all of a sudden Hotmail mailservers get "improved".
I'd like to throw in this reference of a topic that got opened years ago which is still ongoing with no feedback from MS: https://answers.microsoft.com/en-us/outlook_com/forum/oemail-osend/messages-reported-as-250-queued-for-delivery-but/f451cda5-ba7d-45ff-b643-501efe2413dc?page=2 . So you're definitely not alone. But also understand that there can be multiple issues leading to the same symptoms.
So I'd like to add some steps which might help preventing a massive headache for others:
Use a footer that clearly states your company and domain.
Use HTML mail
For some reasons sometimes I see mails getting delivered directly in the Deleted folder. Not in Spam
For some reason sending more mails from your domain is better as you gain more "reputation"
You can open a case with Microsoft here:
https://support.microsoft.com/en-us/getsupport?oaspworkflow=start_1.0.0.0&wfname=capsub&productkey=edfsmsbl3&locale=en-us&ccsid=635754176123391261
Don't set your expectations high. They'll mainly send you an email back that you're not eligible for remediation and later on answer on your case with a standard answer. HOWEVER what creating this case does do is probably getting confirmation that your email got indeed "filtered" by the mighty SmartScreen (they will not tell you why). But this way at least you know it's the spam filter and the below points might help you out.
Make sure to pass the message ID, timestamp, ... (log entry from maillog is what I did)
The answer on your case will certainly mention to use SNDS(Smart Network Data Service) and JMRP (Junk Mail Reporting Program)
SNDS: I've subscribed and never seen anything listed here. So if you have low email volume don't expect anything to show up here
JMRP: this is a service that will send you an email when a message gets marked as spam by users. I've never got anything useful out of this either.
make sure that your DNS settings are correct (MX record, A record, PTR record). This was all correct for me and nobody could point out a flaw in my configuration.
if you open a case they'll also send you a link to "Improving E-mail Deliverability into Windows Live Hotmail". You can find this on google as well and it might give some pointers.
if you're clearly sending an email campaign add in an Opt-out link (which again was not the case for me)
even if the destination address has your email address whitelisted your mail might be silently discarded. This goes beyond all logic.
having them send an email and reply might get your email delivered as well although it looks clumsy to go ask to send you an email so you can actually use email.
Basically the filter tries to "intelligently" determine what's normal mail behavior and based on that will take actions. So there's a big chance you can get your mail delivered by improving the content of your mails.
All in all I can only recommend to not use hotmail. Not for yourself or for your customers if you're a business. Unless you always want to be doubting if the other side actually received the mail. Sometimes you might be able to call, but if this is a lead through your site and they never get your response that's lost business. Of course it's the user's choice but if you can, try to convince them to use another mail account they have as none of the other providers just silently deletes mails (or at least I've never seen it).
I hope this helps someone else.
I have a plugin, that gets the comment authors name by "$comment->comment_author", but apparently this also gives you the authors ip and gateway, etc.
Is this normal behaviour or is there a way to stop this?
this is how the email looks:
Autor: Carlotta (IP: xxx.xxx.xxx , xxxx.adsl.highway.telekom.at)
E-Mail : xxx#student.tugraz.at
URL:
Whois: http://whois.arin.net/rest/ip/xx.114.244.129
thanks in advance
If you are the site administrator then WordPress will send you this information by default, however it is only the site admin who sees it, and not your average user.
sry, the problem is resolved! The Email to the users looks fine, but its the email to the site admin, that looks like this, which isn´t a problem! Thanks anyways :)
Sorry ,my English is poor, I have never speak English after I leave the school.
but now this problem have trouble me for a long days.
My problem: when I open the website which the security certificate is wrong ,then
IE8 show:
===========================
There is a problem with this website's security certificate.
The security certificate presented by this website was not issued by a trusted certificate authority.
Security certificate problems may indicate an attempt to fool you or intercept any data you send to the server.
We recommend that you close this webpage and do not continue to this website.
Click here to close this webpage.
Continue to this website (not recommended).
==============================
I want to open this website(https) without show this alert page
the method may use "regedit", or change the internet Options, or by code ......and so on.
please help me
thanks thanks thanks
You can do this via regedit. Go to the following key:
HKEY_USERS\<SID>\Software\Microsoft\Windows\CurrentVersion\Internet Settings
And set WarnonBadCertRecving to 0
If it doesn't exist, create a new DWORD called WarnonBadCertRecving and then set that to 0.
Alternatively, make a .reg file containing this and double click to run:
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings]
"WarnonBadCertRecving"=dword:00000000