Can someone describe from a network point of view what RPC (SUN and/or DCE) is and why it deviates from standard TCP behavior?
The way that I understand it is a client reaches out to a server with a unique source port and then switches the source port after the TCP three way handshake finishes. I work with ASA firewalls so this behavior becomes very apparent when the inspection of DCE RPC is not enabled since the firewall will block it because it sees it as a threat. I have read a few MS TechNet articles and other website definitions to include watching about five Youtube videos which all seem to explain it from a programmers perspective but I have yet to fully understand this concept since I am not a programmer.
Note that there is nothing that deviates from standard TCP regarding the RPC protocols.
SunRPC or DCE RPC works on top of UDP(at least SunRPC can use UDP) or on top of TCP.
Typically in order for an RPC client to contact/call an RPCserver, it first contacts some sort of lookup server (called portmapper or rpcbind in the case of SunRPC), which replies with the location (IP address and port number) of where the actual server is running.
So from a networking perspective:
RPC Servers listens on a random port number, which may change each time that server program is (re)started.
At startup the RPC server connects to the portmapper, which runs on a well known port and register itself with which IP address and port number it's listening on.
Normally the portmapper service runs on the same machine as the RPC server programs.
When a client wants to connect to or call an RPC service it performs these actions:
Connects to the portmapper, on a well known/standard destination port and asks it where the particular service it wants to connect to is.
portmapper replies with the IP address and port number of the service the client asked for.
client tears down the connection to the portmapper
client establishes a new connection to the service using the IP address and port number that pormapper gave it.
client calls the RPC service over this new connection, which the client may use for multiple RPC calls.
These RPC calls are just application message exchanged on top of a TCP connection.
(In the case UDP is used instead of TCP, it works much the same, but there's no naturally no connection setup/teardown being performed over the network)
This presents a problem for firewalls, since the servers listens on randomly chosen port numbers, one cannot administratively allow access to a particular port number. Instead a firewall wanting to support this kind of setup would need to open up the portmapper port, catch the RPC messages going to that well known port of portmapper, inspect the message content exchanged with the portmapper to extract the IP address and port number from the RPC messages(the portmapper is itself implemented as an RPC server) in order to dynamically open a port between the RPC server and client.
Related
I know how TCP protocols work from the server point of view. NAT is used to know on which local machine is the port number xx reserved.
When I establish a connection with a server, it opens a non-reserved port. How does my livebox, for example, knows I reserved my port and not an other computer ?
Additional questions:
- For the Client/Server, is there one port per socket ? One per processus ? One per Thread ?
- On a server, there is a socket listening on a port, once it accepts a connection, does it open a new port ?
How does my livebox, for example, knows I reserved my port and not an
other computer ?
I assume you are talking if the client is behind a NAT.
Is ever the client to contact the server. So when the client send the first packet to the server through your router(that provide for you NATting). The router save into is NAT table the address and the port of the client, so when i get the answer he know who is the client.
Additional questions: - For the Client/Server, is there one port per
socket ? One per processus ? One per Thread ? - On a server, there is
a socket listening on a port, once it accepts a connection, does it
open a new port ?
I think you are confusing some concepts.
Into the OSI protocol and into TCP/IP protocol there are differents kind of layers.
As you can see TCP (Transmission Control Protocol) is under the Application Layer.
When you are talking of socket you are into the application layer. So all decisions:
"Use same port, bind new port for every incoming request" are made by specific application.
A network socket is an endpoint of a connection across a computer
network. Today, most communication between computers is based on the
Internet Protocol; therefore most network sockets are Internet
sockets. More precisely, a socket is a handle (abstract reference)
that a local program can pass to the networking application
programming interface (API) to use the connection, for example "send
this data on this socket". Sockets are internally often simply
integers, which identify which connection to use.
For more about NAT read here.
For more about Port Forwarding read here.
Given that you have multiple web browsers running, all which obviously listen on port 80, how would a browser figure if an incoming HTTP response was originated by itself? And whether or not catch the response and show it?
As part of the connection process a TCP/IP connection is assigned a client port. Browsers do not "listen on port 80"; rather a browser/clients initiate a request to port 80 on the server and waits for a reply on the client port from the server's IP.
After the client port is assigned (locally), each client [TCP/IP] connection is uniquely identified by (server IP, server port, client IP, client port) and the connection (and response sent over such) can be "connected back" to the correct browser. This same connection-identifying tuple is how a server doesn't confuse multiple requests coming from the same client/IP1
HTTP sits on top of the TCP/IP layer and doesn't have to concern itself with mixing up connection streams. (HTTP/2 introduces multiplexing, but that is a different beast and only affects connection from the same browser.)
See The Ephemeral Port Range for an overview:
A TCP/IPv4 connection consists of two endpoints, and each endpoint consists of an IP address and a port number. Therefore, when a client user connects to a server computer, an established connection can be thought of as the 4-tuple of (server IP, server port, client IP, client port). Usually three of the four are readily known -- client machine uses its own IP address and when connecting to a remote service, the server machine's IP address and service port number are required [leaving only the client port unknown and to be automatically assigned].
What is not immediately evident is that when a connection is established that the client side of the connection uses a port number. Unless a client program explicitly requests a specific port number, the port number used is an ephemeral port number. Ephemeral ports are temporary ports assigned by a machine's IP stack, and are assigned from a designated range of ports for this purpose. When the connection terminates, the ephemeral port is available for reuse, although most IP stacks won't reuse that port number until the entire pool of ephemeral ports have been used. So, if the client program reconnects, it will be assigned a different ephemeral port number for its side of the new connection.
See TCP/IP Client (Ephemeral) Ports and Client/Server Application Port Use for an additional gentle explanation:
To know where to send the reply, the server must know the port number the client is using. This [client port] is supplied by the client as the Source Port in the request, and then used by the server as the destination port to send the reply. Client processes don't use well-known or registered ports. Instead, each client process is assigned a temporary port number for its use. This is commonly called an ephemeral port number.
1 If there are multiple client computers (ie. different TCP/IP stacks each assigning possibly-duplicate ephemeral ports) using the same external IP then something like Network Address Translation must be used so the server still has a unique tuple per connection:
Network address translation (NAT) is a methodology of modifying network address information in Internet Protocol (IP) datagram packet headers while they are in transit across a traffic routing device for the purpose of remapping one IP address space into another.
thank you all for answers.
the hole listening thing over port 80 was my bad,I must have been dizzy last night :D
anyway,as I have read HTTP is connectionless.
browser initiates an HTTP request and after a request is made, the client disconnects from >the server and waits for a response. The server process the request and re-establish the >connection with the client to send response back.
therefor the browser does not maintain connection waiting for a response.so the answer is not that easy to just send the response back to the open socket.
here's the source
Pay attention browesers aren't listening on specific port to receive HTTP response. Web server listening on specific ports (usually 80 or 443). Browser open connection to web server, and send HTTP request to web server. Browser don't close connection before receive HTTP response. Web server writes HTTP response on opened connection.
Given that you have multiple web browsers running, all which obviously listen on port 80
Not obvious: just wrong. The HTTP server listens on port 80. The browsers connect to port 80.
how would a browser figure if an incoming HTTP response was originated by itself?
Because it comes back on the same connection and socket that was used to send the request.
And whether or not catch the response and show it?
Anything that comes back on the connected socket belongs to the guy who connected the socket.
And in any case all this is the function of TCP, not the browser.
To my understanding by serverSocket = new ServerSocket(portNumber) we create an object which potentially can "listen" to the indicated port. By clientSocket = serverSocket.accept() we force the server socket to "listen" to its port and to "accept" a connection from any client which tries to connect to the server through the port associated with the server. When I say "client tries to connect to the server" I mean that client program executes "nameSocket = new Socket(serverIP,serverPort)".
If client is trying to connect to the server, the server "accepts" this client (i.e. creates a "client socket" associated with this client).
If a new client tries to connect to the server, the server creates another client socket (associated with the new client). But how the server knows if it is a "new" client or an "old" one which has already its socket? Or, in other words, how the clients are identified? By their IP? By their IP and port? By some "signatures"?
What happens if an "old" client tries to use Socket(serverIP,serverIP) again? Will server create the second socket associated with this client?
The server listens on an address and port. For example, your server's IP address is 10.0.0.1, and it is listening on port 8000.
Your client IP address is 10.0.0.2, and the client "connects" to the server at 10.0.0.1 port 8000. In the TCP connect, you are giving the port of the server that you want to connect to. Your client will actually get its own port number, but you don't control this, and it will be different on each connection. The client chooses the server port that it wants to connect to and not the client port that it is connecting from.
For example, on the first connection, your client may get client-side port 12345. It is connecting from 10.0.0.2 port 12345 to the server 10.0.0.1 port 8000. Your server can see what port the client is connecting from by calling getpeername on its side of the connection.
When the client connects a second time, the port number is going to be different, say port 12377. The server can see this by calling getpeername on the second connection -- it will see a different port number on the client side. (getpeername also shows the client's IP address.)
Also, each time you call accept on the server, you are getting a new socket. You still have the original socket listening, and on each accept you get a new socket. Call getpeername on the accepted socket to see which client port the connection is coming from. If two clients connect to your server, you now have three sockets -- the original listening socket, and the sockets of each of the two clients.
You can have many clients connected to the same server port 8000 at the same time. And, many clients can be connected from the same client port (e.g. port 12345), only not from the same IP address. From the same client IP address, e.g. 10.0.0.2, each client connection to the server port 8000 will be from a unique client port, e.g. 12345, 12377, etc. You can tell the clients apart by their combination of IP address and port.
The same client can also have multiple connections to the server at the same time, e.g. one connection from client port 12345 and another from 12377 at the same time. By client I mean the originating IP address, and not a particular software object. You'll just see two active connections having the same client IP address.
Also, eventually over time, the combination of client-address and client-port can be reused. That is, eventually, you may see a new client come in from 10.0.0.2 port 12345, long after the first client at 10.0.0.2 port 12345 has disconnected.
Every TCP connection has as identifier the quadruple (src port, src address, dest port, dest address).
Whenever your server accepts a new client, a new Socket is created and it's indipendent from every other socket created so far. The identification of clients is not implictly handled somehow..
You don't have to think sockets as associated to "clients", they are associated with an ip and a port, but there is not direct correlation between these two.
If the same client tries to open another socket by creating a new one you'll have two unrelated sockets (because ports will be different for sure). This because the client cannot use the same port to open the new connection so the quadruple will be different, same client ip, same server ip, same server port but different client port.
EDIT for your questions:
clients don't specify a port because it's randomly choosen from the free ones (> 1024 if I'm not wrong) from the underlying operating system
a connection cannot be opened from a client using the same port, the operating system won't let you do that (actually you don't specify any port at all) and in any case it would tell you that port is already bound to a socket so this issue cannot happen.
whenever the server receives a new connection request it's is considered new, because also if ip is the same port will be different for sure (in case of old packet resend or similar caveats I think that the request will be discarded)
By the way all these situations are clearly explained in TCP RFC here.
I think the question here is why do you care if the client is new or old. What is new and old?
For example, a web browser could connect to a web server to request a web page. This will create a connection so serverSocket.accept() will return a new Socket. Then the connection is closed by the web browser.
Afer a couple of minutes, the end used click on a link in the web page and the browser request a new page to the server. This will create a connection so serverSocket.accept() will return a new Socket.
Now, the web server do not care if this is a new or old client. It just need to server the requested page. If the server do care if the "client" already requested a page in the past, it should do so using some information in the protocol used on the socket. Check out http://en.wikipedia.org/wiki/OSI_model
In this case, the ServerSocket and Socket ack on the transport level. The question "does this client already requested a page on the server" should be answered by information on the session or even application layer.
In the web browser/server example, the http protocol (which is an application) protocol hold information about who is this browser in the parameters of the request (the browser transmit cookie informations with every request). The http server can then set/read cookie information to known if the browser connected before and eventually maintain a server side session for that browser.
So back to your question: why do you care if it's a new or old client?
A socket is identified by:
(Local IP,Local Port, Remote IP,
Remote Port,IP Protocol(UDP/TCP/SCTP/etc.)
And that's the information the OS uses to map the packets/data to the right handle/file descriptor of your program. For some kinds of sockets,(e.g. an non-connected UDP socket)the remote port/remote IP might be wildcards.
By definition, this is not a Java related question, but about networking in general, since Sockets and SeverSockets apply to any networking-enabled programming language.
A Socket is bounded to a local-port. The client will open a connection to the server (by the Operating System/drivers/adapters/hardware/line/.../line/hardware/adapters/drivers/Server OS). This "connection" is done by a protocol, called the IP (Internet Protocol) when you are connected to the Internet. When you use "Sockets", it will use another protocol, which is the TCP/IP-protocol.
The Internet Protocol will identify nodes on a network by two things: their IP-address and their port. The TCP/IP-protocol will send messages using the IP, and making sure messages are correctly received.
Now; to answer your question: it all depends! It depends on your drivers, your adapters, your hardware, your line. When you connect to your localhost machine, you will not get further than the adapter. The hardware isn't necessairy, since no data is actually sent over the line. (Though often you need hardware before you can have an adapter.)
By definition, the Internet Protocol defines a connection as pair of nodes (thus four things: two IP-adresses and two ports). Also, the Internet Protocol defines that one node can only use one port at a time to initiate a connection with another node (note: this only applies for the client, not the server).
To answer your second question: if there are two Sockets: the "new" and the "old". Since, by the Internet Protocol, a connection is a pair of nodes, and nodes can only use one port at a time for a connection, the ports of "new" and "old" must be different. And because this is different, the "new" client can be discriminated from the "old", since the port-number is differently.
From what I understand, each HTTP request uses its own TCP connection (please correct me if i'm wrong). So, let's say that there are two current connections to the same server. For example, client side javascript code triggering a couple of AJAX POST requests using the XMLHttpRequest object, one right after the other, before getting the response to the first one. So we're talking about two connections to the same server, each waiting for a response in order to route it to each separate callback function.
Now here's the thing that I don't understand: The TCP packet includes source and destination ip and port, but won't both of these connections have the same src and dest ip addresses, and port 80? How can the packets be differentiated and routed to appropriately? Does it have anything to do with the packet sequence number which is different for each connection?
When your browser creates a new connection to the HTTP server, it uses a different source port.
For example, say your browser creates two connections to a server and that your IP address is 60.12.34.56. The first connection might originate from source port 60123 and the second from 60127. This is embedded in the TCP header of each packet sent to the server. When the server replies to each connection, it uses the appropriate port (e.g. 60123 or 60127) so that the packet makes it back to the right spot.
One of the best ways to learn about this is to download Wireshark and just observe traffic on your own network. It will show you this and much more.
Additionally, this gives insight into how Network Address Translation (NAT) works on a router. You can have many computers share the same IP address and the router will rewrite the request to use a different port so that two computers can simultaneously connect to places like AOL Instant Messenger.
They're differentiated by the source port.
The main reason for each HTTP request to not generate a separate TCP connection is called keepalives, incidentally.
A socket, in packet network communications, is considered to be the combination of 4 elements: server IP, server port, client IP, client port. The second one is usually fixed in a protocol, e.g. http usually listen in port 80, but the client port is a random number usually in the range 1024-65535. This is because the operating system could use those ports for known server protocols (e.g. 21 for FTP, 22 for SSH, etc.). The same network device can not use the same client port to open two different connections even to different servers and if two different clients use the same port, the server can tell them apart by their IP addresses. If a port is being used in a system either to listen for connection or to establish a connection, it can not be used for anything else. That's how the operating system can dispatch packets to the correct process once received by the network card.
The socket API is the de-facto standard for TCP/IP and UDP/IP communications (that is, networking code as we know it). However, one of its core functions, accept() is a bit magical.
To borrow a semi-formal definition:
accept() is used on the server side.
It accepts a received incoming attempt
to create a new TCP connection from
the remote client, and creates a new
socket associated with the socket
address pair of this connection.
In other words, accept returns a new socket through which the server can communicate with the newly connected client. The old socket (on which accept was called) stays open, on the same port, listening for new connections.
How does accept work? How is it implemented? There's a lot of confusion on this topic. Many people claim accept opens a new port and you communicate with the client through it. But this obviously isn't true, as no new port is opened. You actually can communicate through the same port with different clients, but how? When several threads call recv on the same port, how does the data know where to go?
I guess it's something along the lines of the client's address being associated with a socket descriptor, and whenever data comes through recv it's routed to the correct socket, but I'm not sure.
It'd be great to get a thorough explanation of the inner-workings of this mechanism.
Your confusion lies in thinking that a socket is identified by Server IP : Server Port. When in actuality, sockets are uniquely identified by a quartet of information:
Client IP : Client Port and Server IP : Server Port
So while the Server IP and Server Port are constant in all accepted connections, the client side information is what allows it to keep track of where everything is going.
Example to clarify things:
Say we have a server at 192.168.1.1:80 and two clients, 10.0.0.1 and 10.0.0.2.
10.0.0.1 opens a connection on local port 1234 and connects to the server. Now the server has one socket identified as follows:
10.0.0.1:1234 - 192.168.1.1:80
Now 10.0.0.2 opens a connection on local port 5678 and connects to the server. Now the server has two sockets identified as follows:
10.0.0.1:1234 - 192.168.1.1:80
10.0.0.2:5678 - 192.168.1.1:80
Just to add to the answer given by user "17 of 26"
The socket actually consists of 5 tuple - (source ip, source port, destination ip, destination port, protocol). Here the protocol could TCP or UDP or any transport layer protocol. This protocol is identified in the packet from the 'protocol' field in the IP datagram.
Thus it is possible to have to different applications on the server communicating to to the same client on exactly the same 4-tuples but different in protocol field. For example
Apache at server side talking on (server1.com:880-client1:1234 on TCP)
and
World of Warcraft talking on (server1.com:880-client1:1234 on UDP)
Both the client and server will handle this as protocol field in the IP packet in both cases is different even if all the other 4 fields are same.
What confused me when I was learning this, was that the terms socket and port suggest that they are something physical, when in fact they're just data structures the kernel uses to abstract the details of networking.
As such, the data structures are implemented to be able to distinguish connections from different clients. As to how they're implemented, the answer is either a.) it doesn't matter, the purpose of the sockets API is precisely that the implementation shouldn't matter or b.) just have a look. Apart from the highly recommended Stevens books providing a detailed description of one implementation, check out the source in Linux or Solaris or one of the BSD's.
As the other guy said, a socket is uniquely identified by a 4-tuple (Client IP, Client Port, Server IP, Server Port).
The server process running on the Server IP maintains a database (meaning I don't care what kind of table/list/tree/array/magic data structure it uses) of active sockets and listens on the Server Port. When it receives a message (via the server's TCP/IP stack), it checks the Client IP and Port against the database. If the Client IP and Client Port are found in a database entry, the message is handed off to an existing handler, else a new database entry is created and a new handler spawned to handle that socket.
In the early days of the ARPAnet, certain protocols (FTP for one) would listen to a specified port for connection requests, and reply with a handoff port. Further communications for that connection would go over the handoff port. This was done to improve per-packet performance: computers were several orders of magnitude slower in those days.