Well I'm just completely new to Common Lisp programming language and I have started learning this language by my own from yesterday and that too out of interest.Now when i came across functions and loop,after learning about them I started developing the Prime Number problem in Common Lisp.
My code is as follows:
(defun prime (num)
(setq c 1)
(setq a 2)
(loop
(setq a (+ 1 a))
(if (= (mod num a) 0)
(setq c (+ c 1))
)
(when (> (+ a 1) 17) (return a))
)
)
(if (= c 1)
(return-from prime num)
)
)
(loop for x from 1 to 20
do (prime x)
)
Now the problem which I am facing with this code is that whenever I am trying to execute this code the error which I am getting is as follows:
***IF: variable C has no value
but I've declared a value to c already still it's appearing. So all i want to know is that why this error is appearing even though i have declared it.
When asking Emacs to reindent your code according to parenthesis depth, the cause of the error is immediately obvious:
(defun prime (num)
(setq c 1)
(setq a 2)
(loop
(setq a (+ 1 a))
(if (= (mod num a) 0)
(setq c (+ c 1)))
(when (> (+ a 1) 17) (return a))))
(if (= c 1)
(return-from prime num)))
(loop for x from 1 to 20
do (prime x))
As you can see, your (if (= c 1) (return-from prime num)) is simply outside your prime function, and when it is eval'd as part of loading the file, it tries to eval c, which is indeed unbound as this is outside any scope where c is bound.
You may want to use an editor that can highlight parenthesis pairs in order to easier avoid these problems.
On another note, you may want to use (let) instead of (setq), to give you proper lexical bindings. The way your program is currently written, c and a are essentially global variables.
Related
I'm trying to get the hang of recursion in scheme. I put together a Fibinachi function and it keeps returning unspecified instead of a number. How do I make this function return a number and to unspecified?
(define (F n)
(if (= n 0)
0)
(if (= n 1)
1)
(if (< n 2)
(+
(F (- n 1))
(F (- n 2)))))
(display (F 5))
(newline)
The function returns
#<unspecified>
I'm using guile (GNU Guile) 2.0.13.
The issue here is that your code is:
(begin
(if a 1)
(if b 2)
(if c 3))
What is wrong with this? The value of that will be unspecified except if c is true.
Why? The value of each if is unspecified when the condition is false. The begin returns the value of the last expression.
Where did the begin come from you might ask as it didn't appear in my code? To make it easier every lambda and define contains an implicit begin which is why your code was even accepted for execution.
You should use either nested ifs or a cond form:
(if a 1
(if b 2
(if c 3)))
(cond (a 1)
(b 2)
(c 3))
This is not a homework assignment. In the following code:
(defparameter nums '())
(defun fib (number)
(if (< number 2)
number
(push (+ (fib (- number 1)) (fib (- number 2))) nums))
return nums)
(format t "~a " (fib 100))
Since I am quite inexperienced with Common Lisp, I am at a loss as to why the function does not return an value. I am a trying to print first 'n' values, e.g., 100, of the Fibonacci Sequence.
Thank you.
An obvious approach to computing fibonacci numbers is this:
(defun fib (n)
(if (< n 2)
n
(+ (fib (- n 1)) (fib (- n 2)))))
(defun fibs (n)
(loop for i from 1 below n
collect (fib i)))
A little thought should tell you why no approach like this is going to help you compute the first 100 Fibonacci numbers: the time taken to compute (fib n) is equal to or a little more than the time taken to compute (fib (- n 1)) plus the time taken to compute (fib (- n 2)): this is exponential (see this stack overflow answer).
A good solution to this is memoization: the calculation of (fib n) repeats subcalculations a huge number of times, and if we can just remember the answer we computed last time we can avoid doing so again.
(An earlier version of this answer has an overcomplex macro here: something like that may be useful in general but is not needed here.)
Here is how you can memoize fib:
(defun fib (n)
(check-type n (integer 0) "natural number")
(let ((so-far '((2 . 1) (1 . 1) (0 . 0))))
(labels ((fibber (m)
(when (> m (car (first so-far)))
(push (cons m (+ (fibber (- m 1))
(fibber (- m 2))))
so-far))
(cdr (assoc m so-far))))
(fibber n))))
This keeps a table – an alist – of the results it has computed so far, and uses this to avoid recomputation.
With this memoized version of the function:
> (time (fib 1000))
Timing the evaluation of (fib 1000)
User time = 0.000
System time = 0.000
Elapsed time = 0.000
Allocation = 101944 bytes
0 Page faults
43466557686937456435688527675040625802564660517371780402481729089536555417949051890403879840079255169295922593080322634775209689623239873322471161642996440906533187938298969649928516003704476137795166849228875
The above definition uses a fresh cache for each call to fib: this is fine, because the local function, fibber does reuse the cache. But you can do better than this by putting the cache outside the function altogether:
(defmacro define-function (name expression)
;; Install EXPRESSION as the function value of NAME, returning NAME
;; This is just to avoid having to say `(setf ...)`: it should
;; probably do something at compile-time too so the compiler knows
;; the function will be defined.
`(progn
(setf (fdefinition ',name) ,expression)
',name))
(define-function fib
(let ((so-far '((2 . 1) (1 . 1) (0 . 0))))
(lambda (n)
(block fib
(check-type n (integer 0) "natural number")
(labels ((fibber (m)
(when (> m (car (first so-far)))
(push (cons m (+ (fibber (- m 1))
(fibber (- m 2))))
so-far))
(cdr (assoc m so-far))))
(fibber n))))))
This version of fib will share its cache between calls, which means it is a little faster, allocates a little less memory but may be less thread-safe:
> (time (fib 1000))
[...]
Allocation = 96072 bytes
[...]
> (time (fib 1000))
[...]
Allocation = 0 bytes
[...]
Interestingly memoization was invented (or at least named) by Donald Michie, who worked on breaking Tunny (and hence with Colossus), and who I also knew slightly: the history of computing is still pretty short!
Note that memoization is one of the times where you can end up fighting a battle with the compiler. In particular for a function like this:
(defun f (...)
...
;; no function bindings or notinline declarations of F here
...
(f ...)
...)
Then the compiler is allowed (but not required) to assume that the apparently recursive call to f is a recursive call into the function it is compiling, and thus to avoid a lot of the overhead of a full function call. In particular it is not required to retrieve the current function value of the symbol f: it can just call directly into the function itself.
What this means is that an attempt to write a function, memoize which can be used to mamoize an existing recursive function, as (setf (fdefinition 'f) (memoize #'f)) may not work: the function f still call directly into the unmemoized version of itself and won't notice that the function value of f has been changed.
This is in fact true even if the recursion is indirect in many cases: the compiler is allowed to assume that calls to a function g for which there is a definition in the same file are calls to the version defined in the file, and again avoid the overhead of a full call.
The way to deal with this is to add suitable notinline declarations: if a call is covered by a notinline declaration (which must be known to the compiler) then it must be made as a full call. From the spec:
A compiler is not free to ignore this declaration; calls to the specified functions must be implemented as out-of-line subroutine calls.
What this means is that, in order to memoize functions you have to add suitable notinline declarations for recursive calls, and this means that memoizing either needs to be done by a macro, or must rely on the user adding suitable declarations to the functions to be memoized.
This is only a problem because the CL compiler is allowed to be smart: almost always that's a good thing!
Your function unconditionally returns nums (but only if a variable called return exists). To see why, we can format it like this:
(defun fib (number)
(if (< number 2)
number
(push (+ (fib (- number 1)) (fib (- number 2))) nums))
return
nums)
If the number is less than 2, then it evaluates the expression number, uselessly, and throws away the result. Otherwise, it pushes the result of the (+ ....) expression onto the nums list. Then it uselessly evaluates return, throwing away the result. If a variable called return doesn't exist, that's an error situation. Otherwise, it evaluates nums and that is the return value.
In Common Lisp, there is a return operator for terminating and returning out of anonymous named blocks (blocks whose name is the symbol nil). If you define a named function with defun, then an invisible block exists which is not anonymous: it has the same name as that function. In that case, return-from can be used:
(defun function ()
(return-from function 42) ;; function terminates, returns 42
(print 'notreached)) ;; this never executes
Certain standard control flow and looping constructs establish a hidden anonymous block, so return can be used:
(dolist (x '(1 2 3))
(return 42)) ;; loop terminates, yields 42 as its result
If we use (return ...) but there is no enclosing anonymous block, that is an error.
The expression (return ...) is different from just return, which evaluates a variable named by the symbol return, retrieving its contents.
It is not clear how to repair your fib function, because the requirements are unknown. The side effect of pushing values into a global list normally doesn't belong inside a mathematical function like this, which should be pure (side-effect-free).
So you might know that if you know the two previous numbers you can compute the next. What comes after 3, 5? If you guess 8 you have understood it. Now if you start with 0, 1 and roll 1, 1, 1, 2, etc you collect the first variable until you have the number of numbers you'd like:
(defun fibs (elements)
"makes a list of elements fibonacci numbers starting with the first"
(loop :for a := 0 :then b
:for b := 1 :then c
:for c := (+ a b)
:for n :below elements
:collect a))
(fibs 10)
; ==> (0 1 1 2 3 5 8 13 21 34)
Every form in Common Lisp "returns" a value. You can say it evaluates to. eg.
(if (< a b)
5
10)
This evaluates either to 5 or 10. Thus you can do this and expect that it evaluates to either 15 or 20:
(+ 10
(if (< a b)
5
10))
You basically want your functions to have one expression that calculates the result. eg.
(defun fib (n)
(if (zerop n)
n
(+ (fib (1- n)) (fib (- n 2)))))
This evaluates to the result og the if expression... loop with :collect returns the list. You also have (return expression) and (return-from name expression) but they are usually unnecessary.
Your global variable num is actually not that a bad idea.
It is about to have a central memory about which fibonacci numbers were already calculated. And not to calculate those already calculated numbers again.
This is the very idea of memoization.
But first, I do it in bad manner with a global variable.
Bad version with global variable *fibonacci*
(defparameter *fibonacci* '(1 1))
(defun fib (number)
(let ((len (length *fibonacci*)))
(if (> len number)
(elt *fibonacci* (- len number 1)) ;; already in *fibonacci*
(labels ((add-fibs (n-times)
(push (+ (car *fibonacci*)
(cadr *fibonacci*))
*fibonacci*)
(cond ((zerop n-times) (car *fibonacci*))
(t (add-fibs (1- n-times))))))
(add-fibs (- number len))))))
;;> (fib 10)
;; 89
;;> *fibonacci*
;; (89 55 34 21 13 8 5 3 2 1 1)
Good functional version (memoization)
In memoization, you hide the global *fibonacci* variable
into the environment of a lexical function (the memoized version of a function).
(defun memoize (fn)
(let ((cache (make-hash-table :test #'equal)))
#'(lambda (&rest args)
(multiple-value-bind (val win) (gethash args cache)
(if win
val
(setf (gethash args cache)
(apply fn args)))))))
(defun fib (num)
(cond ((zerop num) 1)
((= 1 num) 1)
(t (+ (fib (- num 1))
(fib (- num 2))))))
The previously global variable *fibonacci* is here actually the local variable cache of the memoize function - encapsulated/hidden from the global environment,
accessible/look-up-able only through the function fibm.
Applying memoization on fib (bad version!)
(defparameter fibm (memoize #'fib))
Since common lisp is a Lisp 2 (separated namespace between function and variable names) but we have here to assign the memoized function to a variable,
we have to use (funcall <variable-name-bearing-function> <args for memoized function>).
(funcall fibm 10) ;; 89
Or we define an additional
(defun fibm (num)
(funcall fibm num))
and can do
(fibm 10)
However, this saves/memoizes only the out calls e.g. here only the
Fibonacci value for 10. Although for that, Fibonacci numbers
for 9, 8, ..., 1 are calculated, too.
To make them saved, look the next section!
Applying memoization on fib (better version by #Sylwester - thank you!)
(setf (symbol-function 'fib) (memoize #'fib))
Now the original fib function is the memoized function,
so all fib-calls will be memoized.
In addition, you don't need funcall to call the memoized version,
but just do
(fib 10)
Ok, I'm been learning COMMON LISP programming and I'm working on a very simple program to calculate a factorial of a given integer. Simple, right?
Here's the code so far:
(write-line "Please enter a number...")
(setq x (read))
(defun factorial(n)
(if (= n 1)
(setq a 1)
)
(if (> n 1)
(setq a (* n (factorial (- n 1))))
)
(format t "~D! is ~D" n a)
)
(factorial x)
Problem is, when I run this on either CodeChef or Rexter.com, I get a similar error: "NIL is NOT a number."
I've tried using cond instead of an if to no avail.
As a side note, and most bewildering of all, I've seen a lot of places write the code like this:
(defun fact(n)
(if (= n 1)
1
(* n (fact (- n 1)))))
Which doesn't even make sense to me, what with the 1 just floating out there with no parentheses around it. However, with a little tinkering (writing additional lines outside the function) I can get it to execute (equally bewildering!).
But that's not what I want! I'd like the factorial function to print/return the values without having to execute additional code outside it.
What am I doing wrong?
One actually needs to flush the I/O buffers in portable code with FINISH-OUTPUT - otherwise the Lisp may want to read something and the prompt hasn't yet been printed. You better replace SETQ with LET, as SETQ does not introduce a variable, it just sets it.
(defun factorial (n)
(if (= n 1)
1
(* n (factorial (- n 1)))))
(write-line "Please enter a number...")
(finish-output) ; this makes sure the text is printed now
(let ((x (read)))
(format t "~D! is ~D" x (factorial x)))
Before answering your question, I would like to tell you some basic things about Lisp. (Neat fix to your solution at the end)
In Lisp, the output of every function is the "last line executed in the function". Unless you use some syntax manipulation like "return" or "return-from", which is not the Lisp-way.
The (format t "your string") will always return 'NIL as its output. But before returning the output, this function "prints" the string as well.
But the output of format function is 'NIL.
Now, the issue with your code is the output of your function. Again, the output would be the last line which in your case is:
(format t "~D! is ~D" n a)
This will return 'NIL.
To convince yourself, run the following as per your defined function:
(equal (factorial 1) 'nil)
This returns:
1! is 1
T
So it "prints" your string and then outputs T. Hence the output of your function is indeed 'NIL.
So when you input any number greater than 1, the recursive call runs and reaches the end as input 1 and returns 'NIL.
and then tries to execute this:
(setq a (* n (factorial (- n 1))))
Where the second argument to * is 'NIL and hence the error.
A quick fix to your solution is to add the last line as the output:
(write-line "Please enter a number...")
(setq x (read))
(defun factorial(n)
(if (= n 1)
(setq a 1)
)
(if (> n 1)
(setq a (* n (factorial (- n 1))))
)
(format t "~D! is ~D" n a)
a ;; Now this is the last line, so this will work
)
(factorial x)
Neater code (with Lisp-like indentation)
(defun factorial (n)
(if (= n 1)
1
(* n (factorial (- n 1)))))
(write-line "Please enter a number...")
(setq x (read))
(format t "~D! is ~D" x (factorial x))
Common Lisp is designed to be compiled. Therefore if you want global or local variables you need to define them before you set them.
On line 2 you give x a value but have not declared the existence of a variable by that name. You can do so as (defvar x), although the name x is considered unidiomatic. Many implementations will give a warning and automatically create a global variable when you try to set something which hasn’t been defined.
In your factorial function you try to set a. This is a treated either as an error or a global variable. Note that in your recursive call you are changing the value of a, although this wouldn’t actually have too much of an effect of the rest of your function were right. Your function is also not reentrant and there is no reason for this. You can introduce a local variable using let. Alternatively you could add it to your lambda list as (n &aux a). Secondarily your factorial function does not return a useful value as format does not return a useful value. In Common Lisp in an (implicit) progn, the value of the final expression is returned. You could fix this by adding a in the line below your format.
For tracing execution you could do (trace factorial) to have proper tracing information automatically printed. Then you could get rid of your format statement.
Finally it is worth noting that the whole function is quite unidiomatic. Your syntax is not normal. Common Lisp implementations come with a pretty printer. Emacs does too (bound to M-q). One does not normally do lots of reading and setting of global variables (except occasionally at the repl). Lisp isn’t really used for scripts in this style and has much better mechanisms for controlling scope. Secondarily one wouldn’t normally use so much mutating of state in a function like this. Here is a different way of doing factorial:
(defun factorial (n)
(if (< n 2)
1
(* n (factorial (1- n)))))
And tail recursively:
(defun factorial (n &optional (a 1))
(if (< n 2) a (factorial (1- n) (* a n))))
And iteratively (with printing):
(defun factorial (n)
(loop for i from 1 to n
with a = 1
do (setf a (* a i))
(format t “~a! = ~a~%” i a)
finally (return a)))
You can split it up into parts, something like this:
(defun prompt (prompt-str)
(write-line prompt-str *query-io*)
(finish-output)
(read *query-io*))
(defun factorial (n)
(cond ((= n 1) 1)
(t (* n
(factorial (decf n)))))
(defun factorial-driver ()
(let* ((n (prompt "Enter a number: "))
(result (factorial n)))
(format *query-io* "The factorial of ~A is ~A~%" n result)))
And then run the whole thing as (factorial-driver).
Sample interaction:
CL-USER 54 > (factorial-driver)
Enter a number:
4
The factorial of 4 is 24
I started programming with lisp yesterday so please excuse if I am making some really newbie mistake. I am trying to create a function which calculates the bell numbers using the bell triangle and my recursive triangle function is not working properly. I am also sure if I got my recursive triangle function working that my recursive bell function is somehow also broken.
When I test my triangle function I get the output:
(defun bell(l n)
(if(< n 1)(list 1))
(if (= n 1)(last l))
(bell (triangle (reverse l) (last l) (list-length l)) (- n 1))
)
(defun triangle(pL nL i)
(if(<= i 0)
(write "equals zero!")
(reverse nL)
)
(triangle pL (append (list (+ (nth i pL) (nth i nL))) nL) (- i 1))
)
(write (triangle '(1) '(1) 0))
=>
"equals zero!""equals zero!"
*** - NTH: -1 is not a non-negative integer
For some reason, it is printing my debug code twice even though the function should be meeting my base case on the first call.
For some reason, it is printing my debug code twice even though the function should be meeting my base case on the first call.
It is printed twice because if is not doing what you think it does. The first if test is true, therefore equals zero! is printed. After that, a recursive call to triangle function is invoked. The test is again true (-1 <= 0), so equals zero! is again printed. Finally, you get an error because nthcdr function is called with -1. I strongly recommend you a good lisp debugger. The one from Lispworks is pretty good.
I honestly don't get the logic of what you were trying to achieve with your code. so I wrote mine:
(defun generate-level (l &optional (result))
"given a list l that represents a triangle level, it generates the next level"
(if (null l) result
(if (null result)
(generate-level l (list (car (last l))))
(generate-level (cdr l) (append result
(list (+ (car l)
(car (last result)))))))))
(defun bell (levels &optional (l))
"generate a bell triangle with the number of labels given by the first parameter"
(unless (zerop levels)
(let ((to-print (if (null l) (list 1) (generate-level l))))
(print to-print)
(bell (1- levels) to-print))))
Things to understand the implementation:
&optional (parameter): this parameter is optional and nil by default.
append concatenates two lists. I'm using it to insert in the back of the list.
let ((to-print x)) creates a new variable binding (local variable) called to-print and initialized to x.
I almost forgot to mention how if works in common lisp:
(if (= x 1) y z) means if x is equal to 1 then return y, otherwise z.
Now if you call the function to create a Bell triangle of 7 levels:
CL-USER 9 > (bell 7)
(1)
(1 2)
(2 3 5)
(5 7 10 15)
(15 20 27 37 52)
(52 67 87 114 151 203)
(203 255 322 409 523 674 877)
NIL
It would be nicer to print it with the appropiate padding, like this:
1
1 2
2 3 5
5 7 10 15
15 20 27 37 52
52 67 87 114 151 203
203 255 322 409 523 674 877
but I left that as an exercise to the reader.
Your ifs don't have any effect. They're evaluated, and produce results, but then you discard them. Just like
(defun abc ()
'a
'b
'c)
would evaluate 'a and 'b to produce the symbols a and b, and then would evaluate 'c to produce the symbol c, which would then be returned. In the case of
(if(<= i 0)
(write "equals zero!") ; then
(reverse nL) ; else
)
you're comparing whether i is less than or equal to zero, and if it is, you print equals zero, and if it's not, you (non-destructively) reverse nL and discard the result. Then you finish the function by making a call to triangle. It seems like you probably want to return the reversed nL when i is less than or equal to zero. Use cond instead, since you can have multiple body forms, as in:
(cond
((<= i 0) (write ...) (reverse nL))
(t (triangle ...)))
You could also use if with progn to group the forms:
(if (<= i 0)
(progn
(write ...)
(reverse nL))
(triangle ...))
Your other function has the same problem. If you want to return values in those first cases, you need to use a form that actually returns them. For instance:
(if (< n 1)
(list 1)
(if (= n 1)
(last l)
(bell #| ... |#)))
More idiomatic would be cond, and using list rather than l, which looks a lot like 1:
(cond
((< n 1) (list 1))
((= n 1) (last list))
(t (bell #| ... |#)))
Thank you all for the explanations. I eventually arrived at the code below. I realized that the if block worked something like..
(if (condition) (execute statement) (else execute this statement))
(defun bell(l n)
(if (< n 2)(last l)
(bell (triangle l (last l) 0) (- n 1))
)
)
(defun triangle(pL nL i)
(if(= i (list-length pL)) nL
(triangle pL (append nL (list (+ (nth i pL) (nth i nL)))) (+ i 1))
)
)
(write (bell (list 1) 10))
I am still new in racket language.
I am implementing a switch case in racket but it is not working.
So, I shift into using the equal and condition. I want to know how can i call a function that takes input. for example: factorial(n) function
I want to call it in :
(if (= c 1) (factorial (n))
There are two syntax problems with this snippet:
(if (= c 1) (factorial (n)))
For starters, an if expression in Racket needs three parts:
(if <condition> <consequent> <alternative>)
The first thing to fix would be to provide an expression that will be executed when c equals 1, and another that will run if c is not equal to 1. Say, something like this:
(if (= c 1) 1 (factorial (n)))
Now the second problem: in Scheme, when you surround a symbol with parentheses it means that you're trying to execute a function. So if you write (n), the interpreter believes that n is a function with no arguments and that you're trying to call it. To fix this, simply remove the () around n:
(if (= c 1) 1 (factorial n))
Now that the syntax problems are out of the way, let's examine the logic. In Scheme, we normally use recursion to express solutions, but a recursion has to advance at some point, so it will eventually end. If you keep passing the same parameter to the recursion, without modifying it, you'll get caught in an infinite loop. Here's the proper way to write a recursive factorial procedure:
(define (factorial n)
(if (<= n 0) ; base case: if n <= 0
1 ; then return 1
(* n (factorial (- n 1))))) ; otherwise multiply and advance recursion
Notice how we decrement n at each step, to make sure that it will eventually reach zero, ending the recursion. Once you get comfortable with this solution, we can think of making it better. Read about tail recursion, see how the compiler will optimize our loops as long as we write them in such a way that the last thing done on each execution path is the recursive call, with nothing left to do after it. For instance, the previous code can be written more efficiently as follows, and see how we pass the accumulated answer in a parameter:
(define (factorial n)
(let loop ([n n] [acc 1])
(if (<= n 0)
acc
(loop (- n 1) (* n acc)))))
UPDATE
After taking a look at the comments, I see that you want to implement a switchcase procedure. Once again, there are problems with the way you're declaring functions. This is wrong:
(define fact(x)
The correct way is this:
(define (fact x)
And for actually implementing switchcase, it's possible to use nested ifs as you attempted, but that's not the best way. Learn how to use the cond expression or the case expression, either one will make your solution simpler. And anyway you have to provide an additional condition, in case c is neither 1 nor 2. Also, you're confounding the parameter name - is it c or x? With all the recommendations in place, here's how your code should look:
(define (switchcase c)
(cond ((= c 1) (fact c))
((= c 2) (triple c))
(else (error "unknown value" c))))
In racket-lang, conditionals with if has syntax:
(if <expr> <expr> <expr>)
So in your case, you have to provide another <expr>.
(define (factorial n)
(if (= n 1) 1 (* n (factorial (- n 1)))))
;^exp ^exp ^exp
(factorial 3)
The results would be 6
Update:
(define (factorial n)
(if (= n 1) 1 (* n (factorial (- n 1)))))
(define (triple x)
(* 3 x))
(define (switchcase c)
(if (= c 1)
(factorial c)
(if(= c 2)
(triple c) "c is not 1 or 2")))
(switchcase 2)
If you want something a lot closer to a switch case given you can return procedures.
(define (switch input cases)
(let ((lookup (assoc input cases)))
(if lookup
(cdr lookup)
(error "Undefined case on " input " in " cases))))
(define (this-switch c)
(let ((cases (list (cons 1 triple)
(cons 2 factorial))))
((switch c cases) c)))