I would like to create a local wireless without internet.
I would like to have the possibility to connect 50 clients and access to a website using a domain name.
That means, I need a DNS and DHCP.
I sreach on internet an I found a way to achieve that but not totally and i am not sure if it will work and if it is the best way to achieve that.
I can maybe have a mini PC (server) with ad hoc network and have the client to connect on the server but:
Will it be possible on a connection to assign a ip to the client and set a DNS server ip on the client as the same ip of the server.
I found mini PCs but how can I know if the PC will handle a lot of client ? Which network card to choose ?
I think also that a router and configure DHCP on it to distribute the IPs but I would like to have one box ready object as a mini PC.
I need an advice on the best way to go with what i want to achieve and materials i need to buy and good references.
For a linux domain controler you will need to install bind to host your own DNS. It's a little involved to set up, but necessary if your network doesn't have a DNS server. If you're using a windows domain controller you will need a server OS (expensive). If you only have 50 clients the DNS resources needed will be small and you could run bind from any old box, even a Raspberry Pi. You will also need a host machine for the "website" a.k.a. an intranet. This can be the same machine as your DNS server, but can be any computer on the network. When all is done you will have your router configured with the IP of your local DNS server. The DNS server will point your local domain to whatever box hosts the intranet website.
Related
So a little background of what I'm trying to accomplish. I'm basically trying to setup a Windows File Server using GCP VM Windows Instance. I have the VM setup and I have created a VPN connection between our office network and to the GCP VM network.
Now I'm trying to communicate between the two different subnets and I have to admit I'm kinda lost.
My office subnet is 192.168.72.0/24 and my GCP IP is 10.123.0.0 with my server being at 10.123.0.2
If I understand networking correctly I need to setup a route between 192.168.72.0 to 10.123.0.2? Or do I just need to create a firewall rule?
I'm using a SonicWall Firewall to establish the VPN connection to the GCP network.
I think I've been working at this too long for one day. I'm steaping away for a bit.
Thanks in advance.
If you set up a Site to Site, you should not need to include a route, you will if you setup a Tunnel Interface. But to me, it sounds like you just need to do a site to site. I dont think the tunnel will come up without the correct subnets, but just verify that the tunnel is up and then I would setup a packet monitor to see what route the traffic is taking when you try to ping from 192.168.72.0/24 to IP is 10.123.0.0.
There have been many articles on various forums on how to setup mcrosoft active directory domain services. I am a bit new to the field, so please bear with my ignorance. I have a very basic query whose answer i am not able to find. I have an office of 20 people where i would like to deploy AD Domain services to have a better control. i want to know how should i set my network PHYSICALLY. I have a router supplied by my internet provider. Where exactly should i put my server? Can i plug my server anyhere in the network and connect the users through domain, or the main internet wire should plug into the server first and the users in turn be connected to the server. enter image description here I hope i am clear. Should internet ‘flow’ from the server which has AD to users, or i can put the serverver anywhere in the topology.
In a small size network like yours, 1 server should be enough. It should be somewhere behind the router. Plugging it into the switch is fine as it will have a internal address.
You will need DNS on your server which will install when you promote to a DC. All of your computers need to look at your server for DNS. Your Server's DNS should have a forwarder to your ISP DNS or to a public DNS. It doesn't matter if you server or your router does DHCP so long as it gives out the server Internal IP for DNS.
What would I do:
I would plug your ISP into the Router, Your Router into your Switch, and all computers + server into the Switch.
You can place your server anywhere in the topology. It is not necessary for all user traffic to the internet to be routed through the server.
With small-scale deployments (less than 25 Users) I typically just put the server on the same switch and subnet as the users.
I have windows 8 host and i have installed ubuntu 14.10 server as a virtual machine in vmware. i have installed LAMP server and i am trying to host a website from it. i have created a virtual host. my website is accessible in the host machine when i go to the address 192.168.0.106.
my router info:
LAN
IP Address :192.168.0.1
INTERNET
IP Address :10.30.XXX.XXX
"what is my ip" in google: 113.XXX.XXX.XXX
how do i make my website accessible from the internet ? I know it is a dumb question, but i tried searching everywhere and could not get the solution.
Since you say that you can connect to the site from the host machine, it does not matter that it is in a VM.
You say that you can connect to your site via: 192.168.0.106 on the LAN. You need to forward connections to your WAN address (113.193.56.198) to your LAN address (192.168.0.106). You can do this in most router settings in a section called Port forwarding. Use port 80 if you're hitting the LAN IP from a browser and you don't have to add a port after the address like http:\\192.168.0.106:1234. Otherwise, use whatever port you like.
Once you get that working, it is a good idea to use a dynamic DNS service, which will connect your IP to a domain name and update the connection whenever your WAN IP changes. This way, instead of using the WAN IP in a browser, you can use your domain name and it should always work. But that's not your first problem. First get it working with the WAN IP by itself. Once you've got that working, get some DynDNS.
EDIT
If you think it should be working but can't figure out why it isn't, use a tool like nmap/zenmap to scan your WAN and LAN IPs. That will help you diagnose the problem.
A DynDNS should do the job!
It will automatically renew your dynamic ip address. All you need is; a tool that runs on your server with website.
Search for it on google, and you'll find a solution. Btw: there are, Free and paid solutions.
EDIT: by the way, your router requires additionally some port forwarding to make your website accessible from outside. Even with the DynDNS stuff installed.
Just to give you some indications.
My goal is to have two laptops in a network. One is acting as a server, serving webpages to the other. The catch here is that neither is connected to the outside internet.
What I have done so far is setup WAMP on the server laptop, and it successfully serves web pages on localhost. Now I want to access these pages on the other laptop.
To do this, I had the server create an ad-hoc network and connected the other laptop to it, but I'm stuck - and I'm worried I'm not on the right track. I followed this tutorial but in the end I figured out that just explained how to spoof a text URL as an IP address, and not really what I was looking for.
So I guess I have two questions:
Is my method the best way to do this (with ad-hoc networks)? Is there some way to connect a laptop to a wireless router and have the laptop act as a server to another laptop?
If my WAMP and ad-hoc network should work, how do I connect other laptops to my server through the ad-hoc network?
Thanks!
I would suggest the first option: get a wifi router. Then you can assign static IP adresses from the routers private network or use DHCP server on the router. Hopefully you will have an option to reserve IP adresses on DHCP server so you dont have to check every time what IP adress the laptop acting as a server got. You use this address to access your web server. Also, you can use this router later as a gateway to the internet if you want.
In ad hoc mode you will probably get an address from 169.254.0.0/16 link-local scope, and you can check it by running ipconfig as #Robadob already suggested.
On your hosting laptop open cmd and call ipconfig look for the internal IP address on the network interface your hosting the ad-hoc network.
Enter that IP address into the browser on your client laptops web browser instead of localhost.
If that doesn't work, try other ip addresses listed by ipconfig (incase you used the wrong) and then check the properties of your ad-hoc network, windows firewall and any other firewall software to disable anything that might be blocking it.
An ad-hoc network is suitable option for what your doing, most people would probably use a switch or router though, however that requires hardware you probably don't have.
I published a web application to one of app servers. Now, if I am connected within my company network (no login require), I can access the web site no problem. Now, if I am connected from outside of the network over VPN, I can't access the website (Getting page not found appears). Do I need to configure IIS on the app server for allowing the connection over VPN?
Thanks for your time.
It sounds like you do not have your firewall/router configured correctly to allow traffic from external sources. When your connected via VPN it is like you are connected to the internal network. Without the VPN you need to make sure it is routed correctly and visible through your firewall. Can you ping the IP that you are trying to get to?
Do you get DNS resolution when you connect over the VPN? If you are trying to hit an internal machine name address, you might try changing to the IP address of the machine.