I want to get event entries by their description (data).
I know how to get the event entry with a certain description, however I want to get an entry whith a description which contains a string (not equals to it).
That, I don't know how to do.
Please help :)
According to my answer here: https://stackoverflow.com/a/34119006/5089204 you should be able to retrieve EventRecords.
Dealing with these events is a quite complex issue... Each event has its own internal structure. The common properties are bundled in EventRecord, but the specific data must be taken from the internal details. Use the ToXml() method of an EventRecord...
In order to get the right events you must define an EventLogQuery. You must know the Provider's name and specify the filter.
Try the following: Open eventvwr and there the Windows-System queue. Right click one event, open the "Details" and choose the "XML-View". Look over different events and you will find, that they are quite differing.
But: You'll find everything you need there: First the "Provider Name" and the "EventId", these two are most important for the `EventLogQuery'.
Now go to the "define a user filter on the current protocoll"-action and type in some values. Then switch to the filter's XML and you'll learn how to define the correct query.
I'm sorry, there is no "easy and general" approach :-)
Related
Tokenize2 is a javacsript lib to select multiple options.
It provides a very neat UI to start writing and then get a list of options to select from. Selected options will show up as "tags" that can be removed with "x" link.
So far all is fine. But Right now you need to know what your looking for and start write at least one character to see matching alternatives.
In my scenario there are very few alternatives and they are not known to the user. I would like to show ALL options when the user clicks the input box. There is a configuration option named searchMinLength but it is already set to 0.
Is there a workaround that can be used? Maybe like triggering load and dropdown manually?
I know there are a lot of similar alternatives but I picked Tokenize2 because:
It looks clean and nice
It works in mobile browsers
I don't know if there is an "official" approach, but after some investigation I have found an acceptable workaround.
After downloading the Tokenizer2 sourceode I found the following line that triggered my attention:
if(this.input.val().length > 0){
this.trigger('tokenize:search', [this.input.val()]);
}
My interpretation is that the internal search command is not triggered unless the user input has at least one character. This line in sourcecode could easily be modified. I have filed a suggestion for this here: https://github.com/zellerda/Tokenize2/issues/26
My current workaround is to add an event listener for the select event and there trigger the internal search command. That works fine for my scenario and does not force a source code rewrite.
$("#my-dropdown").on("tokenize:select", function (e: Event, routedEvent: boolean) {
$("#my-dropdown").trigger('tokenize:search', "");
});
Tokenize2
This link worked for me GitHub
$('.tokenize-sample-demo1').on('tokenize:select', function(container){
$(this).tokenize2().trigger('tokenize:search', [$(this).tokenize2().input.val()]);
});
I need to use that api : http://docs.alfresco.com/4.0/index.jsp?topic=%2Fcom.alfresco.enterprise.doc%2Freferences%2FRESTful-FeedUserfeedGet.html
What I don't know is how to format activityFilter parameter ? What kind of things can I filter ? I'd like to set a max number of results, is it possible ?
I don't know where to find the documentation.
Thank you.
Mathieu.
I don't know where/if the list is documented, but it isn't hard to find out the values you are looking for...
The first place to go is the Web Script Index, which is:
http://localhost:8080/alfresco/service/index
From there you can find that web script, click on its ID, and see its declaration, any accompanying documentation, and, often, the code of the web script controller.
In this case, the controller is Java-based, so you can get its class and go look at that in the source.
Often, that's not convenient. So the next thing to do is to realize that Alfresco Share makes use of the same web script. If you turn on Firebug and go to the Alfresco Share Global Dashboard you can see the activity feed dashlet. As you change the second dropdown (the one that defaults to "all items") you will see your browser doing GETs against that web script. By choosing the various choices available in the dashlet, you'll see that the values it uses to filter activities are:
org.alfresco.comments.comment-created
org.alfresco.comments.comment-updated
org.alfresco.documentlibrary.file-added
org.alfresco.documentlibrary.file-deleted
org.alfresco.documentlibrary.file-updated
org.alfresco.documentlibrary.files-added
org.alfresco.documentlibrary.files-deleted
org.alfresco.documentlibrary.files-updated
org.alfresco.profile.status-changed
org.alfresco.site.user-joined
org.alfresco.site.user-left
org.alfresco.site.user-role-changed
You can pass more than one of these at-a-time to the web script by separating each with an escaped comma (%2C).
There may be more filters available, but those are the ones used by the activity feed dashlet on the global dashboard.
I'd like to customize the rss feed in plone, and append information about the location, contact person, email address and phone number of an event.
Modifying the RSS.pt template I managed to add the start date:
<dc:date tal:content="python: item.context.start()"></dc:date>
But I don't know how to access the other things (guessing like item.context.mail etc doesn't work).
Can someone give me a hint about their names, or how to find information about the context attributes and their correct names?
Using Plone4.3
Be careful, if you list something that is not an event, item.context.start() will raise an error.
You can find the schema here : https://github.com/plone/Products.ATContentTypes/blob/master/Products/ATContentTypes/content/event.py
once again I have to ask you for a help.
I have a problem with creating public variable and using it in formula.
The details of this issue is:
1, right after starting a Lotus Notes Application i have to create public variable EmpNum which will be contain an employee number (the number will be imported from IBM Blue Pages)
2, this EmpNum variable will be used to filter the data in a view, so I have to use it in formula in View Selection.
I'll be very grateful if you help with this issue.
Maybe there is possible any simplest solution of this problem?
Thanks in advance,
Tomasz (td2003)
EDIT:
Torsten, Panu, thank you.
I've decided to try write an EmpNum variable in notes.ini using #SetEnvironment and read it by #GetEnvironment, and it works.
BUT (!) there is a very strange thing:
1) when I entered formula "SELECT((form="ITForm") & (Status="Completed") & (TX_EmployeeNumber=#Environment("EmpNum")))" the view shows me all document where "TX_EmployeeNumber" is EMPTY;
2) otherwise when I entered formula "SELECT((form="ITForm") & (Status="Completed") & (TX_EmployeeNumber!=#Environment("EmpNum")))" (not equal) the view shows me all document where "TX_EmployeeNumber" is NOT EMPTY and no matter if TX_EmployeeNumber have exactly the same value as EmpNum.
For example: if EmpNum="P11" the view with 2nd formula shows the documents where TX_EmployeeNumber fields contains "P11", "P22", "A32" and so on.
I'm sure that #Environment("EmpNum") retrieves correct data from notes.ini.
I'm totally confused and completely don't know what's going on.
Do you have any idea about this?
First of all: There are NO public variables in Lotus Notes as you request it. Neither in LotusScript nor in Formula. Every variable just lives in its context, never in the complete client.
There are two places to put such a variable:
in the notes.ini, where you can set / read it using Formula (#Environment, #SetEnvironment, #getEnvironent) or LotusScript (NotesSession.GetEnvironmentString, NotesSession.SetEnvironmentVar).
In a Profile document in a database, where you can get it using #GetProfileField (Formula) or NotesDatabase.GetprofileDocument() (LotusScript)
Both of these approches will NOT help you for your number 2.
There is only ONE View- Selection- Formula for ALL Users. Putting something "userspecific" in there will let it render correctly for ONE value (the one, that the server uses when building the view- index), but not for all the others.
To solve your problem you can use:
a) An embedded View
A view that is categorized by empNum
A Form that has this view embedded and a Formula for "Show single category" for this embedded view set
b) A SPOFU view
SPOFU is "Shared, private on first use" and means, that every user has his own copy of the view. These views have some caveats and are hard to maintain. You should NOT use them, if you are not totally aware of the implications (getting the ACL right is one very important thing for these views)...
EDIT (due to change in question): SPOFU will neither work with Environment nor with Profile- documents, as the methods to read them are not supported in Views... So b) is not really an option... Sorry...
It is possible to use the #SetViewInfo formula in the QueryOpen and/or PostOpen of a view to get the view to only present data from one category. Be careful with this because you will need to touch EVERY view so that the value is cleared if the user navigates to a view which is not categorized by the employee num...
FWIW: I only have done this using #UserName not with another piece of data. I suggest you do that by having the import process add the fully qualified Notes name of the user to the documents as they are imported.
You can modify view selection formula with NotesView class. In this case you would have to use private views.
A better solution would be to use an XPage to show the view and use category filter. Or if you want to use traditional style then embed the view to a form or page and use "Show Single Category" feature.
I don't understand how QTable::editCell() should be used. I am trying to do some error checking based on entries made by user in a QTable as mentioned in my another question.
I would like to give user an opportunity to re-edit the cell which has error. For example, if name column entry has some special characters such as '(', the user should be prompted for the error and the control should go back to same cell in edit mode. I tried using QTable::editCell() in my code as shown below.
Table->editCell(row, 0, TRUE);
name = Table->text(row, 0);
However, this doesn't work as expected. The control doesn't stay in the cell at all and obviously the name is not correctly collected. So, my question is how to ensure from within code that a cell of QTable can be edited so that the edited contents can be accessed immediately in next statement (as shown in above code).
Note: I am working with qt 3.3.8 only.
I don't think you can do that. You'll have to go back to the event loop, and wait for one of the signals (like valueChanged(row,col)) to be fired to re-validate the data.
A blocking wait on a GUI object is often not a good approach (except for modal dialogs).
I know I'm a little late here but you should use the following connect statement with your own custom function to do your specific needs such as below. You can also use this method to disable users from entering in special characters within you custom function. That way they wont ever have to correct undesirable characters.
connect(ui->tableWidget, SIGNAL(cellChanged(int,int)), this, SLOT(customFunction(int,int)));
void updateTable
{
//remove invalid characters
}