how to set up 2 virtualhosts with the same root adress? - wordpress

I'd like to set up 2 wordpress sites on the same ip adress, that is ip_adress1/wordpress1 and ip_adress1/wordpress2.
I put these 2 files into /etc/apache2/sites-available (these are basically the same, only site's path changes)
<VirtualHost *:80>
DocumentRoot /usr/share/wordpress/MyFirstSite/
ServerName my.ip.adr.ess
ServerAlias my.ip.adr.ess/MyFirstSite/*
ServerAdmin myemail#adress.ext
Alias /MyFirstSite /usr/share/wordpress/FolderForMyFirstSite
<Directory /usr/share/wordpress/FolderForMyFirstSite>
Options FollowSymLinks MultiViews
Order allow,deny
AllowOverride All
Allow from all
</Directory>
<Directory /usr/share/wordpress/FolderForMyFirstSite/wp-content>
Options FollowSymLinks MultiViews
Order allow,deny
AllowOverride All
Allow from all
</Directory>
</VirtualHost>
and
<VirtualHost *:80>
DocumentRoot /usr/share/wordpress/MySecondSite/
ServerName my.ip.adr.ess
ServerAlias my.ip.adr.ess/MySecondSite/*
ServerAdmin myemail#adress.ext
Alias /MyFirstSite /usr/share/wordpress/FolderForMySecondSite
<Directory /usr/share/wordpress/FolderForMySecondSite>
Options FollowSymLinks MultiViews
Order allow,deny
AllowOverride All
Allow from all
</Directory>
<Directory /usr/share/wordpress/FolderForMySecondSite/wp-content>
Options FollowSymLinks MultiViews
Order allow,deny
AllowOverride All
Allow from all
</Directory>
</VirtualHost>
It seems that the 2 sites in sites-available can work separatly when I enable them.
When I enable both of them simultaneously though, only one works. I think it's overwriting the other... (no apache error, by the way)
One other thing : the sites works when I reach http://my.ip.adr.ess (without the path for the site). And that I'dont't want it to !
What do you think ?
Many thanks in advance
Stanislas

I made this,finally, which seems better, after reading a bit more docs (https://httpd.apache.org/docs/2.2/mod/mod_alias.html) about apache configuration :
<VirtualHost *:80>
DocumentRoot /usr/share/wordpress
ServerName my.ip.adr.ess
ServerAdmin my.email#adress.ext
Alias /Alias1 /usr/share/wordpress/Folder1
<Directory /usr/share/wordpress/Folder1>
Options FollowSymLinks MultiViews
Order allow,deny
AllowOverride All
Allow from all
</Directory>
<Directory /usr/share/wordpress/Folder1/wp-content>
Options FollowSymLinks MultiViews
Order allow,deny
AllowOverride All
Allow from all
</Directory>
Alias /Alias2 /usr/share/wordpress/Folder2
<Directory /usr/share/wordpress/Folder2>
Options FollowSymLinks MultiViews
Order allow,deny
AllowOverride All
Allow from all
</Directory>
<Directory /usr/share/wordpress/Folder2/wp-content>
Options FollowSymLinks MultiViews
Order allow,deny
AllowOverride All
Allow from all
</Directory>
</VirtualHost>

Related

I got server error when using Bitnami Wordpress

I manage 3 websites on one server instance. I set the Bitnami.conf like below
<VirtualHost *:80>
ServerName morethanair.com
ServerAlias morethanair.com
DocumentRoot "/opt/bitnami/apps/wordpress/htdocs"
<Directory "/opt/bitnami/apps/wordpress/htdocs">
Options Indexes FollowSymLinks MultiViews
AllowOverride All
Order allow,deny
allow from all
Require all granted
</Directory>
# Bitnami applications installed with a prefix URL (default)
Include "/opt/bitnami/apache2/conf/bitnami/bitnami-apps-prefix.conf"
</VirtualHost>
<VirtualHost *:80>
ServerName microblog.morethanair.com
DocumentRoot "/opt/bitnami/apps/wordpress/microblog-wordpress/"
<Directory "/opt/bitnami/apps/wordpress/microblog-wordpress/">
Options Indexes FollowSymLinks MultiViews
AllowOverride All
Order allow,deny
allow from all
Require all granted
</Directory>
# Bitnami applications installed with a prefix URL (default)
Include "/opt/bitnami/apache2/conf/bitnami/bitnami-apps-prefix.conf"
</VirtualHost>
<VirtualHost *:80>
ServerName photo.morethanair.com
DocumentRoot "/opt/bitnami/apps/wordpress/photo-wordpress/"
<Directory "/opt/bitnami/apps/wordpress/photo-wordpress/">
Options Indexes FollowSymLinks MultiViews
AllowOverride All
Order allow,deny
allow from all
Require all granted
</Directory>
# Bitnami applications installed with a prefix URL (default)
Include "/opt/bitnami/apache2/conf/bitnami/bitnami-apps-prefix.conf"
</VirtualHost>
I can connect 2 sites with subdomain (photo.morethanair.com and microblog.morethanair.com), but the server error occurred when I try to connect morethanair.com.
When I type 'morethanair.com' in the browser, the URL changes to 'morethanair.com//' with double slash.
Any idea to resolve this?
I already tried to delete Wordpress and all plug-ins and reinstalled the latest Wordpress, but it didn't work.
Thank you.

Wordpress Permalink Doesn't Work Ubuntu Server AWS

I try this tutorial but nothing happen
http://guiem.info/permalinks-on-wordpress-amazon-ec2/
apache2.conf directory codes
<Directory />
Options FollowSymLinks
AllowOverride All
Require all granted
</Directory>
<Directory /usr/share>
AllowOverride None
Require all granted
</Directory>
<Directory /var/www/>
Options Indexes FollowSymLinks
#None
AllowOverride All
Require all granted
</Directory>
<Directory "/var/www/html">
Options Indexes FollowSymLinks
AllowOverride All
Require all granted
</Directory>
<Directory "/var/www/html/wordpress">
Options Indexes FollowSymLinks
AllowOverride All
Require all granted
</Directory>
#<Directory /srv/>
# Options Indexes FollowSymLinks
# AllowOverride None
# Require all granted
#</Directory>
Of course, I always restart apache every time I make a change
If I do not use permalinks wordpress works perfect
According to this article, this can happen when mod_rewrite module is not enabled in Apache configuration file.

Create website conf with 2 virtual hosts

I want to know if it's possible to have one apache website conf file with two vhost inside ?
More clearly :
For now if I access my website like this : XX.XX.XXX.XX I reach my wordpress folder.
Now, I want to access another folder like this : XX.XX.XXX.XX/interface
Is it possible to do it in the same conf file ?
Here is mine actually :
<VirtualHost *:80>
ServerAdmin webmaster#localhost
DocumentRoot /var/www/wordpress/
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
<Directory /var/www/wordpress/>
Options Indexes FollowSymLinks MultiViews
AllowOverride All
Require all granted
</Directory>
ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
<Directory "/usr/lib/cgi-bin">
AllowOverride None
Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
Require all granted
</Directory>
ErrorLog /var/log/apache2/error.log
CustomLog /var/log/apache2/access.log combined
</VirtualHost>
Thanks in advance

how to have customisable wamp url

<VirtualHost *:80>
DocumentRoot "C:\wamp\www\TEST1\wordpress"
ServerName yg8i.tk
ServerAlias www.yg8i.tk
Options Indexes FollowSymLinks
<Directory "C:\wamp\www\TEST1\wordpress">
AllowOverride All
Require all granted
</Directory>
</VirtualHost>
but this will only give them my wordpress website and also if someone types www.yg8i.tk/whatever they will have access to my files.
and i also want to have custom urls so for example i would like to type www.yg8i.tk/login to login to my wordpress site so my solution was
<VirtualHost *:80>
DocumentRoot "C:\wamp\www\TEST1\wordpress\wp-login.php"
ServerName yg8i.tk\login
ServerAlias www.yg8i.tk\login
Options Indexes FollowSymLinks
<Directory "C:\wamp\www\TEST1\wordpress\wp-login.php">
AllowOverride All
Require all granted
</Directory>
</VirtualHost>
but it does not work i really need ur help.
I Hope You Help And Thank You In Advance.
Try changing to this, DocumentRoot and <Directory... can only have a directory as their value.
You can use the DocumentIndex to cause any other script to be launches
<VirtualHost *:80>
DocumentRoot "C:\wamp\www\TEST1\wordpress"
ServerName yg8i.tk\login
ServerAlias www.yg8i.tk\login
Options Indexes FollowSymLinks
DocumentIndex wp-login.php
<Directory "C:\wamp\www\TEST1\wordpress">
AllowOverride All
Require all granted
</Directory>
</VirtualHost>

Apache2 Setup Ubuntu

I'm having problems with setting up my apache2 server in Ubuntu.
I did a sudo apt-get install and it installed normally. I was able to see that the site was working when accessing localhost.
Then I'm not sure what happened, but I am no longer able to see the "It works!" website. When I try to restart apache2, it returns this:
Syntax error on line 17 of /etc/apache2/sites-enabled/000-default:
AddHandler requires at least two arguments, a handler name followed by one or more file extensions
Action 'configtest' failed.
The Apache error log may have more information.
...fail!
Any ideas?
Here is my /etc/apache2/sites-enabled/000-default:
ServerAdmin webmaster#localhost
DocumentRoot /var/www
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
<Directory /var/www/>
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
allow from all
DirectoryIndex index.html index.py
AddHandler mod_python.py
PythonHandler mod_python.publisher
PythonDebug On
</Directory>
ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
<Directory "/usr/lib/cgi-bin">
AllowOverride None
Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
Order allow,deny
Allow from all
</Directory>
ErrorLog ${APACHE_LOG_DIR}/error.log
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
CustomLog ${APACHE_LOG_DIR}/access.log combined
There is a problem on your config file. Try changing the line 14 by :
AddHandler mod_python .py

Resources