Please help me to install recharts package in R. The result is:
installation of package ‘recharts’ had non-zero exit status
I am unable to install it.
The code from R console is posted below:
install.packages('recharts', repos = c('http://yihui.name/xran', 'http://cran.rstudio.com'))
Warning in install.packages :
cannot open: HTTP status was '404 Not Found'
Warning in install.packages :
cannot open: HTTP status was '404 Not Found'
Warning in install.packages :
unable to access index for repository http://yihui.name/xran/bin/windows/contrib/3.2
installing the source package ‘recharts’
trying URL 'http://yihui.name/xran/src/contrib/recharts_0.0.3.tar.gz'
Content type 'application/octet-stream' length 899632 bytes (878 KB)
downloaded 878 KB
'D:\Program' 不是内部或外部命令，也不是可运行的程序
或批处理文件。
Warning in install.packages :
running command '"D:/Program Files/R/R-3.2.2/bin/x64/R" CMD INSTALL -l "D:\Program Files\R\R-3.2.2\library" C:\Users\xgf-pc\AppData\Local\Temp\RtmpwDIN6k/downloaded_packages/recharts_0.0.3.tar.gz' had status 1
Warning in install.packages :
installation of package ‘recharts’ had non-zero exit status
The downloaded source packages are in
‘C:\Users\xgf-pc\AppData\Local\Temp\RtmpwDIN6k\downloaded_packages’
My machine information is as following：
sessionInfo()
R version 3.2.2 (2015-08-14)
Platform: x86_64-w64-mingw32/x64 (64-bit)
Running under: Windows 8 x64 (build 9200)
locale:
[1] LC_COLLATE=Chinese (Simplified)_China.936 LC_CTYPE=Chinese (Simplified)_China.936
[3] LC_MONETARY=Chinese (Simplified)_China.936 LC_NUMERIC=C
[5] LC_TIME=Chinese (Simplified)_China.936
attached base packages:
[1] tcltk stats graphics grDevices utils datasets methods base
other attached packages:
[1] xlsx_0.5.7 xlsxjars_0.6.1 rJava_0.9-7 RODBC_1.3-12 data.table_1.9.6
[6] dplyr_0.4.1 chron_2.3-47 sqldf_0.4-10 RSQLite_1.0.0 DBI_0.3.1
[11] gsubfn_0.6-6 proto_0.3-10 shiny_0.12.2 devtools_1.9.1
loaded via a namespace (and not attached):
[1] Rcpp_0.12.1 rstudioapi_0.3.1 knitr_1.11 magrittr_1.5 xtable_1.8-0
[6] R6_2.1.1 stringr_1.0.0 httr_1.0.0 tools_3.2.2 parallel_3.2.2
[11] htmltools_0.2.6 assertthat_0.1 digest_0.6.8 curl_0.9.3 memoise_0.2.1
[16] mime_0.4 stringi_1.0-1 jsonlite_0.9.17 httpuv_1.3.3
you can try this:
install.packages("recharts",type="source",repos=c("http://yihui.name/xran", "http://cran.rstudio.com"))
Related
Im building an R package and when testing the package using devtools::check() I get an error when the test reaches the installation phase, saying:
Error: .onLoad failed in loadNamespace() for 'pillar', details:
call: utils::packageVersion("vctrs")
error: there is no package called 'vctrs'
Execution halted
ERROR: lazy loading failed for package
Neither pillar nor vctrs are mentioned in my description file, so they must be dependents of some other package that I depend on. Both pillar and vctrs are installed and I've also tried reinstalling them. They are stored in the the first .libPath entry. I tried installing pillar from github as was suggested by mfox9 here, but this failed for me, giving this error:
> devtools::install_github("r-lib/pillar")
Downloading GitHub repo r-lib/pillar#master
√ checking for file 'C:\Users\DESCRIPTION' (337ms)
- preparing 'pillar': (664ms)
√ checking DESCRIPTION meta-information ...
- installing the package to process help pages
- checking for LF line-endings in source and make files and shell scripts (8.5s)
- checking for empty or unneeded directories
- building 'pillar_1.4.2.9001.tar.gz'
Installing package into ‘Z:/’
(as ‘lib’ is unspecified)
The filename, directory name, or volume label syntax is incorrect.
Error: Failed to install 'pillar' from GitHub:
(converted from warning) installation of package ‘C:/Users/Temp/RtmpgjFfZl/file32586b634e28/pillar_1.4.2.9001.tar.gz’ had non-zero exit status
(note: z:/ is my correct R library address)
Can someone please help?
´´´
> sessionInfo()
R version 3.6.1 (2019-07-05)
Platform: x86_64-w64-mingw32/x64 (64-bit)
Running under: Windows 10 x64 (build 15063)
Matrix products: default
locale:
[1] LC_COLLATE=English_United Kingdom.1252 LC_CTYPE=English_United Kingdom.1252
[3] LC_MONETARY=English_United Kingdom.1252 LC_NUMERIC=C
[5] LC_TIME=English_United Kingdom.1252
attached base packages:
[1] stats graphics grDevices utils datasets methods base
other attached packages:
[1] pillar_1.4.2
loaded via a namespace (and not attached):
[1] Rcpp_1.0.2 rstudioapi_0.10 magrittr_1.5 usethis_1.5.1
[5] devtools_2.2.0 pkgload_1.0.2 R6_2.4.0 rlang_0.4.0
[9] tools_3.6.1 pkgbuild_1.0.5 DT_0.8 packrat_0.5.0
[13] sessioninfo_1.1.1 cli_1.1.0 withr_2.1.2 remotes_2.1.0
[17] htmltools_0.3.6 ellipsis_0.2.0.1 assertthat_0.2.1 digest_0.6.20
[21] rprojroot_1.3-2 crayon_1.3.4 processx_3.4.1 callr_3.3.1
[25] fs_1.3.1 htmlwidgets_1.3 ps_1.3.0 curl_4.0
[29] testthat_2.2.1 glue_1.3.1 memoise_1.1.0 compiler_3.6.1
[33] desc_1.2.0 backports_1.1.4 prettyunits_1.0.2
´´´
I am trying to install packages in a fresh install of R in Visual Studio 2017. Some packages will install, but several give me the same error. An example is the 'rvest' package. When I try install.packages("rvest")
install.packages("rvest")
Installing package into ‘C:/Users/Sean/Documents/R/win-library/3.5’
(as ‘lib’ is unspecified)
There is a binary version available but the source version is later:
binary source needs_compilation
rvest 0.3.2 0.3.3 FALSE
installing the source package ‘rvest’
trying URL 'https://mran.microsoft.com/snapshot/2019-04-15/src/contrib/rvest_0.3.3.tar.gz'
Content type 'application/octet-stream' length 1631059 bytes (1.6 MB)
downloaded 1.6 MB
In R CMD INSTALL
The downloaded source packages are in
‘C:\Users\Sean\AppData\Local\Temp\RtmpmuXBs1\downloaded_packages’
Warning message:
In utils::install.packages(...) :
installation of package ‘rvest’ had non-zero exit status
This happens also in 'rcmdcheck':
> install.packages("rcmdcheck")
Installing package into ‘C:/Users/Sean/Documents/R/win-library/3.5’
(as ‘lib’ is unspecified)
There is a binary version available but the source version is later:
binary source needs_compilation
rcmdcheck 1.3.1 1.3.2 FALSE
installing the source package ‘rcmdcheck’
trying URL 'https://mran.microsoft.com/snapshot/2019-04-15/src/contrib/rcmdcheck_1.3.2.tar.gz'
Content type 'application/octet-stream' length 1408582 bytes (1.3 MB)
downloaded 1.3 MB
In R CMD INSTALL
The downloaded source packages are in
‘C:\Users\Sean\AppData\Local\Temp\RtmpmuXBs1\downloaded_packages’
Warning message:
In utils::install.packages(...) :
installation of package ‘rcmdcheck’ had non-zero exit status
My sessionInfo() shows:
> sessionInfo()
R version 3.5.3 (2019-03-11)
Platform: x86_64-w64-mingw32/x64 (64-bit)
Running under: Windows 10 x64 (build 17763)
Matrix products: default
locale:
[1] LC_COLLATE=English_United States.1252 LC_CTYPE=English_United States.1252 LC_MONETARY=English_United States.1252 LC_NUMERIC=C LC_TIME=English_United States.1252
attached base packages:
[1] stats graphics grDevices utils datasets methods base
other attached packages:
[1] FSVRegimeDetection_0.0.0.9000 aTSA_3.1.2 autoimage_2.0 FSVPreselection_0.0.0.9000 FSVTradingRules_0.0.0.9000 FinancialInstrument_1.3.1 quantmod_0.4-14
[8] FSVIndicators_0.0.0.9000 dlm_1.1-5 PerformanceAnalytics_1.5.2 TTR_0.23-4 FSVPositionSizing_0.0.0.9000 FSVDataCheck_0.0.0.9000 xts_0.11-2
[15] zoo_1.8-5 FSVLibraryUtilities_0.0.0.9000 roxygen2_6.1.1 usethis_1.5.0 devtools_2.0.2 ldhmm_0.4.5 RevoUtils_11.0.3
[22] RevoUtilsMath_11.0.0
loaded via a namespace (and not attached):
[1] ecd_0.9.1 pkgload_1.0.2 bit64_0.9-7 moments_0.14 assertthat_0.2.1 rtvs_1.0.0.0 RcppFaddeeva_0.1.0 blob_1.1.1 yaml_2.2.0 remotes_2.0.4
[11] sessioninfo_1.1.1 numDeriv_2016.8-1 pillar_1.3.1 RSQLite_2.1.1 backports_1.1.4 lattice_0.20-38 glue_1.3.1 quadprog_1.5-5 digest_0.6.18 colorspace_1.4-1
[21] plyr_1.8.4 pkgconfig_2.0.2 purrr_0.3.2 xtable_1.8-3 scales_1.0.0 processx_3.3.0 tibble_2.1.1 gmp_0.5-13.5 ggplot2_3.1.1 withr_2.1.2
[31] lazyeval_0.2.2 Rmpfr_0.7-2 cli_1.1.0 magrittr_1.5 crayon_1.3.4 memoise_1.1.0 ps_1.3.0 fs_1.2.7 gsl_2.1-6 xml2_1.2.0
[41] pkgbuild_1.0.3 tools_3.5.3 prettyunits_1.0.2 stringr_1.4.0 munsell_0.5.0 stabledist_0.7-1 FSVBackTest_0.0.0.9000 callr_3.2.0 compiler_3.5.3 rlang_0.3.4
[51] grid_3.5.3 rstudioapi_0.10 testthat_2.0.1 gtable_0.3.0 curl_3.3 DBI_1.0.0 polynom_1.4-0 R6_2.4.0 gridExtra_2.3 knitr_1.22
[61] dplyr_0.8.0.1 optimx_2018-7.10 bit_1.1-14 commonmark_1.7 rprojroot_1.3-2 desc_1.2.0 stringi_1.4.3 parallel_3.5.3 Rcpp_1.0.1 tidyselect_0.2.5
[71] xfun_0.6
Any help tracking down the source of this issue would be greatly appreciated!
I was able to get these packages to load using
type = "binary"
argument in the install.packages() method call. Ie:
install.packages("rvest", type = "binary")
You can try to install the github version of the package using devtools, as below:
install.packages("devtools")
devtools::install_github("tidyverse/rvest")
I am using R studio on Mac OS and I want to use caret package for some data analysis. However, caret depends on rlang package and when I try to load caret package I get this error -
> library(caret)
Error: package or namespace load failed for ‘caret’ in loadNamespace(i, c(lib.loc, .libPaths()), versionCheck = vI[[i]]):
namespace ‘rlang’ 0.2.2 is already loaded, but >= 0.3.0.1 is required
In addition: Warning message:
package ‘caret’ was built under R version 3.4.4
I removed the rlang package from the UI and tried installing it again but I am facing below issue -
> install.packages("rlang")
trying URL 'https://cran.rstudio.com/bin/macosx/el-capitan/contrib/3.4/rlang_0.3.0.1.tgz'
Content type 'application/x-gzip' length 1074663 bytes (1.0 MB)
==================================================
downloaded 1.0 MB
The downloaded binary packages are in
/var/folders/kh/9lkdq11x3sv56717v0700p_r_16f9p/T//RtmplrCvGX/downloaded_packages
> library(rlang)
Error in value[[3L]](cond) :
Package ‘rlang’ version 0.2.2 cannot be unloaded:
Error in unloadNamespace(package) : namespace ‘rlang’ is imported by ‘tidyr’, ‘purrr’, ‘ggplot2’, ‘plotly’, ‘dplyr’, ‘tibble’, ‘pillar’ so cannot be unloaded
In addition: Warning message:
package ‘rlang’ was built under R version 3.4.4
Here is my sessionInfo()
R version 3.4.3 (2017-11-30)
Platform: x86_64-apple-darwin15.6.0 (64-bit)
Running under: macOS 10.14
Matrix products: default
BLAS: /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libBLAS.dylib
LAPACK: /Library/Frameworks/R.framework/Versions/3.4/Resources/lib/libRlapack.dylib
locale:
[1] en_US.UTF-8/en_US.UTF-8/en_US.UTF-8/C/en_US.UTF-8/en_US.UTF-8
attached base packages:
[1] stats graphics grDevices utils datasets methods base
other attached packages:
[1] dummies_1.5.6 ISLR_1.2 mltools_0.3.5 data.table_1.10.4-3 ggplot2_3.0.0.9000 lattice_0.20-35
loaded via a namespace (and not attached):
[1] reshape2_1.4.3 purrr_0.2.4 colorspace_1.3-2 htmltools_0.3.6 viridisLite_0.3.0 yaml_2.1.16 plotly_4.8.0
[8] rlang_0.3.0.1 ModelMetrics_1.2.2 pillar_1.1.0 glue_1.2.0 withr_2.1.2 bindrcpp_0.2 foreach_1.4.4
[15] bindr_0.1 plyr_1.8.4 stringr_1.2.0 munsell_0.5.0 gtable_0.2.0 htmlwidgets_1.2 devtools_1.13.4
[22] codetools_0.2-15 memoise_1.1.0 curl_3.1 Rcpp_0.12.18 scales_1.0.0 jsonlite_1.5 digest_0.6.16
[29] stringi_1.1.6 dplyr_0.7.4 grid_3.4.3 tools_3.4.3 magrittr_1.5 lazyeval_0.2.1 tibble_1.4.2
[36] tidyr_0.7.2 pkgconfig_2.0.1 Matrix_1.2-12 assertthat_0.2.0 httr_1.3.1 iterators_1.0.10 R6_2.2.2
[43] nlme_3.1-131 compiler_3.4.3 git2r_0.21.0
Maybe try this -- Remove rlang, shutdown and restart R, and then reinstall `rlang'.
If you still want to install a specific version of rlang,
1) Go to https://cran.r-project.org/src/contrib/Archive/rlang/
2) Get URL to the specific version you need. (On Chrome, Right click- Copy URL, etc)
3) Start R, install.packages("[URL]", repo=NULL, type="source")
e.g install.packages("https://cran.r-project.org/src/contrib/Archive/rlang/rlang_0.2.2.tar.gz", repo=NULL, type="source")
I am trying to install the quantstrat package in R. I already installed the other packages necessary for quantstrat, below is my session info.
sessionInfo()
R version 3.4.2 (2017-09-28)
Platform: x86_64-w64-mingw32/x64 (64-bit)
Running under: Windows >= 8 x64 (build 9200)
Matrix products: default
locale:
[1] LC_COLLATE=Portuguese_Brazil.1252 LC_CTYPE=Portuguese_Brazil.1252 LC_MONETARY=Portuguese_Brazil.1252 LC_NUMERIC=C
[5] LC_TIME=Portuguese_Brazil.1252
attached base packages:
[1] stats graphics grDevices utils datasets methods base
other attached packages:
[1] blotter_0.12.4 PerformanceAnalytics_1.5.1 FinancialInstrument_1.2.0 foreach_1.4.3 quantmod_0.4-11
[6] TTR_0.23-2 devtools_1.13.4 xts_0.10-0 zoo_1.8-0 lubridate_1.7.1
loaded via a namespace (and not attached):
[1] Rcpp_0.12.13 rstudioapi_0.7 knitr_1.17 magrittr_1.5 lattice_0.20-35 R6_2.2.2 quadprog_1.5-5 stringr_1.2.0
[9] httr_1.3.1 tools_3.4.2 grid_3.4.2 git2r_0.19.0 withr_2.1.0 iterators_1.0.8 yaml_2.1.14 digest_0.6.12
[17] codetools_0.2-15 curl_3.0 memoise_1.1.0 stringi_1.1.5 compiler_3.4.2 boot_1.3-20
when I run the install packages this is what I get:
install.packages("quantstrat", repos="https://github.com/braverock/quantstrat.git")
Installing package into ‘C:/Users/augus/Documents/R/win-library/3.4’
(as ‘lib’ is unspecified)
Warning in install.packages :
unable to access index for repository https://github.com/braverock/quantstrat.git/src/contrib:
cannot open URL 'https://github.com/braverock/quantstrat.git/src/contrib/PACKAGES'
Warning in install.packages :
package ‘quantstrat’ is not available (for R version 3.4.2)
Warning in install.packages :
unable to access index for repository https://github.com/braverock/quantstrat.git/bin/windows/contrib/3.4:
cannot open URL 'https://github.com/braverock/quantstrat.git/bin/windows/contrib/3.4/PACKAGES'
I have also tried to download a previous version and install it, but with no success, I got it from the followin link:
http://download.r-forge.r-project.org/bin/windows/contrib/3.2/quantstrat_0.9.1739.zip
install.packages("C:/Users/augus/Dropbox/Trading/R/quantstrat_0.9.17392.zip", repos = NULL)
Installing package into ‘C:/Users/augus/Documents/R/win-library/3.4’
(as ‘lib’ is unspecified)
Warning in install.packages :
cannot open compressed file 'quantstrat/DESCRIPTION', probable reason 'No such file or directory'
Error in install.packages : cannot open the connection
Does someone know what I am doing wrong?
Thanks
Augusto
As noted in the comments above, for completeness here is an answer.
The most straightforward way to install the latest version of quantstrat is via github with devtools (the version of quantstrat on R-forge is now out of date):
library(devtools)
install_github("braverock/quantstrat")
I tried installing all the dependant packages and also tried another repo source as recommended in another post here.
R version 3.2.0 x64
install.packages("fracdiff")
install.packages("Rcpp")
install.packages("RcppArmadillo")
install.packages("colorspace")
install.packages("forecast", dep=T)
install.packages("forecast", repos=c("http://cran.rstudio.com"),dep=T)
library("forecast")
then I get
Loading required package: zoo
Attaching package: ‘zoo’
The following objects are masked from ‘package:base’:
as.Date, as.Date.numeric
Loading required package: timeDate
Error : .onAttach failed in attachNamespace() for 'forecast', details:
call: fun(libname, pkgname)
error: 4 arguments passed to .Internal(nchar) which requires 3
In addition: Warning message:
package ‘forecast’ was built under R version 3.2.1
Error: package or namespace load failed for ‘forecast’
sessionInfo()
R version 3.2.0 (2015-04-16)
Platform: x86_64-w64-mingw32/x64 (64-bit)
Running under: Windows 8 x64 (build 9200)
locale:
[1] LC_COLLATE=English_United States.1252 LC_CTYPE=English_United States.1252 LC_MONETARY=English_United States.1252 LC_NUMERIC=C
[5] LC_TIME=English_United States.1252
attached base packages:
[1] grid stats graphics grDevices utils datasets methods base
other attached packages:
[1] Hmisc_3.16-0 ggplot2_1.0.1 Formula_1.2-1 survival_2.38-1 lattice_0.20-31 zoo_1.7-12 timeSeries_3012.99 timeDate_3012.100
loaded via a namespace (and not attached):
[1] Rcpp_0.11.6 cluster_2.0.1 magrittr_1.5 MASS_7.3-41 splines_3.2.0 forecast_6.1 munsell_0.4.2
[8] colorspace_1.2-6 quadprog_1.5-5 stringr_1.0.0 plyr_1.8.3 tools_3.2.0 nnet_7.3-9 parallel_3.2.0
[15] gtable_0.1.2 latticeExtra_0.6-26 tseries_0.10-34 digest_0.6.8 gridExtra_0.9.1 RColorBrewer_1.1-2 reshape2_1.4.1
[22] acepack_1.3-3.3 rpart_4.1-9 fracdiff_1.4-2 stringi_0.4-1 scales_0.2.5 foreign_0.8-63 proto_0.3-10
I tried to reproduce. I get no message about either loading timeDate or the error you see. I do get a message about loading pkg:zoo. The package loads and announces its version number. Try updating to R version 3.2.1, since that is where a new argument to nchar was introduced:
new$Text[ grep("nchar", news$Text) ]
• nchar(x, *) and nzchar(x) gain a new argument keepNA which governs how the result for NAs in x is determined. For the R 3.2.x series, the default remains FALSE which is fully back compatible. From R 3.3.0, the default will change to keepNA = NA and you are advised to consider this for code portability.