Is there any possibility in IAR to add additional project variable like $PROJ_DIR$ to specify my project environment?
I like to keep my project portable and adaptable.
Of course there are, according to the manuals:
Variable / Description
$CONFIG_NAME$ The name of the current build configuration, for example Debug or Release.
$CUR_DIR$ Current directory
$CUR_LINE$ Current line
$DATE$ Today’s date
$EW_DIR$ Top directory of IAR Embedded Workbench, for example c:\program files\iar systems\embedded workbench 6.n
$EXE_DIR$ Directory for executable output
$FILE_BNAME$ Filename without extension
$FILE_BPATH$ Full path without extension
$FILE_DIR$ Directory of active file, no filename
$FILE_FNAME$ Filename of active file without path
$FILE_PATH$ Full path of active file (in Editor, Project, or Message window)
$LIST_DIR$ Directory for list output
$OBJ_DIR$ Directory for object output
$PROJ_DIR$ Project directory
$PROJ_FNAME$ Project filename without path
$PROJ_PATH$ Full path of project file
$TARGET_DIR$ Directory of primary output file
$TARGET_BNAME$ Filename without path of primary output file and without extension
$TARGET_BPATH$ Full path of primary output file without extension
$TARGET_FNAME$ Filename without path of primary output file
$TARGET_PATH$ Full path of primary output file
$TOOLKIT_DIR$ Directory of the active product, for example c:\program files\iar systems\embedded workbench 6.n\arm
$USER_NAME$ Your host login name
$ENVVAR$ The environment variable ENVVAR. Any name within $_ and _$ will
be expanded to that system environment variable.
If you go to Tools > Configure Custom Argument Variables you can add variables that you can address with $VARIABLE_NAME$. Not sure if that's exactly what you were looking for.
As a caution, if you are using IarBuild.exe to build from the command line, the workspace or global values set from "Configure Custom Arguments Variables" are not included in the project files (.ewp) and thus is not expanded by IarBuild.exe at build time. This is not an issue if you only use the IDE to build.
I found a reason for my problem (but it givs another one):
I define a windows "path-variable" like LIB_PATH and put it in the IAR project file with $_LIB_PATH_$.This works as long until i save the IAR-project. Then IAR sets all paths realive to $PROJ_DIR$ :-(
Related
I was able to temporarily change it with the following command, but after reboot the working path still changes to C drive.
cd("D:\\jl files”）
As it is explained in the Julia Manual Getting Started section the simplest thing to do is to add the:
cd("D:\\jl files")
line to your ~/.julia/config/startup.jl file (this is a Linux path; if the file does not exist then you should create it with this single line). Since you are on Windows then ~ part should be replaced by default is your user profile folder (it should be possible to check it with ENV["USERPROFILE"] command in Julia). However, if you have a custom installation the .julia folder can be placed in some other folder so you need to check it on your system.
I constantly need to call Tex Live binaries for compilation in R. However after the upgrade of Tex Live distribution, the path to current binaries needed to updated manually in the PATH(Sys.getenv("PATH")) variable.
As a single user on a Ubuntu system, which file should I update the value in, so that R gets the PATH correctly irrespective of whichever directory R is launched from.
One point I still don't gather is from where does R gets its site-wide (I mean for all users, even if faulty in saying so) PATH variable set, because no such variable name as "PATH" occur inside any files (Renviron, Renviron.site, Rprofile.site) in either of "R_HOME/etc/" and user's home directory? I also haven't set Sys.getenv("R_ENVIRON") and Sys.getenv("R_ENVIRON_USER") values.
I'd appreciate anybody's input here.
#JeffreyGoldberg's solution was close, but not quite right.
Rprofile files are interpreted as R code
Renviron files can only contain name value pairs, and are not interpreted as R code
From the help for Startup:
Note that there are two sorts of files used in startup: environment files which contain lists of environment variables to be set, and profile files which contain R code.
I'm not sure if this question is asking specifically how one can set the site wide value of PATH, rather than PATH for one specific user, but there are three locations you can put these files.
A project directory (i.e., a directory you choose to launch R from)
HOME
R_HOME/etc
These locations are searched in the order numbered above. The first location can contain configurations specific to a project, the second contains those specific to a user, and the third, site wide configuration settings. When a file is found it is used, so local takes precedence over global. Don't think you can create a more specific version that simply updates what you've done in a more general configuration file. R_HOME/etc/Renviron is created on installation and should not be edited. You may create a file called R_HOME/etc/Renviron.site, but do not edit R_HOME/etc/Renviron.
To create a site wide value of PATH, you will want to set it in a file in R_HOME/etc. Here you can use either Renviron.site or Rprofile.site for the file name. For a file in R_HOME/etc, Do not use Renviron, Rprofile, .Renviron, or .Rprofile for the name of a profile or environment file in this location. You can find out what R_HOME is in an R session using R.home(), or Sys.getenv("R_HOME")
To create a PATH value for a single user, set it in a file in HOME, which you can find in your R session using Sys.getenv("HOME") or path.expand("~"). You can also just use "~" to refer to HOME. Here, an Renviron file should be ~/.Renvironand an Rprofile file ~/.Rprofile. Take note of the difference between how profile and environment files are named in your HOME directory vs. R_HOME/etc
To create a PATH for a single project, set it in a file in that project's top level directory. Name the files as you would in your home directory (.Rprofile or .Renviron).
If you are creating an Renviron file, the file should include the following line:
PATH=<your path>
< and > should not be included. An example would be:
PATH=/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin
If you are creating an Rprofile file, the file should include the following line:
Sys.setenv("<your path>")
again, don't include "<" or ">". An example would be:
Sys.setenv("/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin")
There are various ways of doing this that get and edit a PATH variable (e.g., tack on a new path at the end, or the beginning). You can also use the strategy of setting an environment variable if it doesn't already exist and/or doesn't contain something you want it to. I've come to prefer just setting up my path simply, and coding it directly.
One final note, if you run R from a command line interface, environment variables may be inherited from your shell. RStudio also has its own startup sequence and may modify the end of your PATH variable. It should start as it is defined in your Rprofile or Renviron files. The R Console app itself has the fewest quirks with system environment variables, and should accept your path exactly as it is set with an Rprofile or Renviron file.
Edit: I should have tested before posting. What I describe below did not work. (Down voting my own answer is a strange thing.)
On my system (macOS, bash), R.app is not picking up my $PATH from my shell environment or .profile. However RStudio is picking it up. I do not understand the different behaviors.
One way to get consistent behavior would be to specify this in an Renviron file.
If you create a file named .Renviron in your come directory with a line like
Sys.setenv(PATH="/opt/local/bin:usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/Library/TeX/texbin")
(but of course with the path elements you need) that should give you consistent behavior.
The downside is that you need to manually maintain this. I suppose you could run a script from one of your other start up scripts that generated the .Renviron file. But either way, I consider this whole thing a work around in place of actually understanding where R picks up its environment from.
I am using Robot Framework, to run 50 Testcases. Everytime its creating following three files as expected:
c:\users\<user>\appdata\local\output.xml
c:\users\<user>\appdata\local\log.html
c:\users\<user>\appdata\local\report.html
But when I run same robot file, these files will be removed and New log files will be created.
I want to keep all previous run logs to refer in future. Log files should be saved in a folder with a time-stamp value in that.
NOTE: I am running robot file from command prompt (pybot test.robot). NOT from RIDE.
Could any one guide me on this?
Using the built-in features of robot
The robot framework user guide has a section titled Timestamping output files which describes how to do this.
From the documentation:
All output files listed in this section can be automatically timestamped with the option --timestampoutputs (-T). When this option is used, a timestamp in the format YYYYMMDD-hhmmss is placed between the extension and the base name of each file. The example below would, for example, create such output files as output-20080604-163225.xml and mylog-20080604-163225.html:
robot --timestampoutputs --log mylog.html --report NONE tests.robot
To specify a folder, this too is documented in the user guide, in the section Output Directory, under Different Output Files:
...The default output directory is the directory where the execution is started from, but it can be altered with the --outputdir (-d) option. The path set with this option is, again, relative to the execution directory, but can naturally be given also as an absolute path...
Using a helper script
You can write a script (in python, bash, powershell, etc) that performs two duties:
launches pybot with all the options you wan
renames the output files
You then just use this helper script instead of calling pybot directly.
I'm having trouble working out how to create a timestamped directory at the end of the execution. This is my script it timestamps the files, but I don't really want that, just the default file names inside a timestamped directory after each execution?
CALL "C:\Python27\Scripts\robot.bat" --variable BROWSER:IE --outputdir C:\robot\ --timestampoutputs --name "Robot Execution" Tests\test1.robot
You may use the directory creation for output files using the timestamp, like I explain in RIDE FAQ
This would be in your case:
-d ./%date:~-4,4%%date:~-10,2%%date:~-7,2%
User can update the default output folder of the robot framework in the pycharm IDE by updating the value for the key "OutputDir" in the Settings.py file present in the folder mentioned below.
..ProjectDirectory\venv\Lib\site-packages\robot\conf\settings.py
Update the 'outputdir' key value in the cli_opts dictionary to "str(os.getcwd()) + "//Results//Report" + datetime.datetime.now().strftime("%d%b%Y_%H%M%S")" of class _BaseSettings(object):
_cli_opts = {
# Update the abspath('.') to the required folder path.
# 'OutputDir' : ('outputdir', abspath('.')),
'OutputDir' : ('outputdir', str(os.getcwd()) + "//Results//Report_" + datetime.datetime.now().strftime("%d%b%Y_%H%M%S") + "//"),
'Report' : ('report', 'report.html'),
If I have multiple binaries whose sources are scattered in various subfolders of an overlaying folder, would windbg have access to them if only the topmost folder was included in Source Path? As opposed to having to reference each project folder of each relevant binary separately.
Assuming, of course, that the sources are unique in the mentioned folder structure, i.e. there are no multiple versions of one and the same project, source, etc.
If you specify the parent folder for the source files in source path then it should traverse through the subdirectories to find the source files.
Note that it will perform a signature match against your source files, in the same way that Visual studio will complain that the source files are different to the loaded dlls.
The relative locations of the source files must match the original locations so if your source files are located in a different structure then you will need to do a manual load/browse to specify the location of the source files.
Can’t answer exactly, but I often have 3 top (parent) directories, and each have approximately 4-5 levels of sub directories. No problems. However nothing beats using a source server
Short answer: NO.
From windbg's help:
For each directory in the symbol path, the debugger looks in three
directories. For example, if the symbol path includes the c:\MyDir
directory, and the debugger is looking for symbol information for a
DLL, the debugger first looks in c:\MyDir\symbols\dll, then in
c:\MyDir\dll, and finally in c:\MyDir. The debugger then repeats this
process for each directory in the symbol path. Finally, the debugger
looks in the current directory and then in the current directory with
\dll appended to it. (The debugger appends dll, exe, or sys, depending
on which binaries it is debugging.)
You can move all projects' .pdb files to one folder or change projects properties and setup the linker to create the .pdb file in a specific folder so you have to reference only one.
I've been doing a bit of debugging on this myself. From what I can tell, the relative path of the file found from the SourcePath needs to match part of the end path of the path embedded in the PDB. For example:
I have a file on disk at:
C:\Users\User\.rustup\toolchains\nightly-x86_64-pc-windows-msvc\lib\rustlib\src\rust\library\std\src\sys\windows\thread_local_key.rs
The path of the file embedded in the PDB is:
/rustc/c09a9529c51cde41c1101e56049d418edb07bf71\/library\std\src\sys\windows\thread_local_key.rs
✔ This SourcePath, and any below it, correctly finds the file:
C:\Users\User\.rustup\toolchains\nightly-x86_64-pc-windows-msvc\lib\rustlib\src\rust
❌ This SourcePath, and any above it, does not find the file:
C:\Users\User\.rustup\toolchains\nightly-x86_64-pc-windows-msvc\lib\rustlib\src
Notice how with the failure case, the relative path to the file would begin with library\. The library path component is the first part of the path that is not found in the embedded path. I assume it does a path check for every relative address, recursively:
thread_local_key.rs
windows\thread_local_key.rs
sys\windows\thread_local_key.rs
src\sys\windows\thread_local_key.rs
std\src\sys\windows\thread_local_key.rs
library\std\src\sys\windows\thread_local_key.rs
etc.
I have created a Setup file i.e. setup.msi , this file contains a website installer
I have a License.xml file that I want to give to my client with the installer (setup.msi).
Before running the setup.msi , client has to make sure that the License.xml file should be in the same directory where setup.msi resist.
I want my setup.msi file to copy the License.xml file to the Destination directory (where website will be installed , this path will be prompted to user for customization)
I am using MSIFactory for creating setup.msi. I am not able to do this. I searched over net but did not get any accurate answer.
I am not familiar with MSIfactory, but in installshield what I would do is, call a batch script to do the copy and pass the target directory as a parameter to it. or use the 'XCopyFile' function to do the copying.