so I'm trying to create a proxy server for my crawler to use, and I'm unsure about why I'm getting denied from even myself. When I go to any website in a browser, on the computer that I've installed Squid and everything on, it's giving me the following error message:
ERROR
The requested URL could not be retrieved
While trying to retrieve the URL: http://www.whatismyipaddress.com/
The following error was encountered:
Access Denied.
Access control configuration prevents your request from being allowed at this time. Please contact your service provider if you feel this is incorrect.
Your cache administrator is webmaster.
Generated Sun, 08 Nov 2015 04:03:13 GMT by WIN-AIUOBK0JHPA (squid/2.7.STABLE8)
I've edited my LAN settings in Internet Options to allow for a proxy server at the correct IP address (IPv4 when I run ipconfig), gave it the correct port to open up to, and I've also opened up the port in my Windows Firewall.
Below are segments of my squid.conf file:
acl SSL_ports port 443
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 # https
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl CONNECT method CONNECT
acl localhost src 192.168.1.0/255.255.255.255
http_access allow localhost
(skip through some commented out segments....)
http_access allow manager localhost
http_access allow localnet
As you can tell, I've stripped out a lot of unnecessary commented parts. Down lower, I have my...
http_port ####
...line.
I have no idea why I'm getting blocked out. I will be constantly refreshing, so if you need any more information or have any questions, please let me know. Thank you so much!!
your config should somewhat look like below
http_access allow localhost
http_access allow localnet
# And finally deny all other access to this proxy
http_access deny all
and remove the following line from your config
acl localhost src 192.168.1.0/255.255.255.255
localhost need not to be specified as ACL its just for accessing localhost pages. You have mixed up localhost with localnet, modify that line like below
acl localnet src 192.168.1.0/255.255.255.255
your lan clients local ip that hitting the proxy should belong to the above mentioned src range or modify the range as you require. all other requests from other ips will be denied
I just got rid of all the default config and used the following:
# cat /etc/squid/squid.conf
http_port 3128
acl vpc_no_internet src 10.130.0.0/255.255.0.0
http_access allow vpc_no_internet
coredump_dir /var/spool/squid
refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
refresh_pattern (Release|Packages(.gz)*)$ 0 20% 2880
refresh_pattern . 0 20% 4320
Note: The above config allows access for the specified subnet only.
I had a similar situation and the solution was to use the following commands:
unset https_proxy
unset http_proxy
unset ftp_proxy
I placed these into a script to run every time I logged in to my server.
This may not be the correct solution for you but it worked in my situation as I wasn't using the proxy and was connecting via vpn.
The only reason I am posting this is I haven't seen this answer posted anywhere else. As usual, YMMV.
Related
I can not access to webmin via squid proxy.
I have squid proxy and webmin set up already.
I have hostname like following.
・squid proxy hostname
dev-proxy.example
・webmin hostname
dev-proxy.example:10000
I addedd following to squid.conf.
# Allow webmin
acl webmin_port port 10000
acl webmin url_regex "/etc/squid/webmin.acl"
http_access allow CONNECT webmin_port localnet
http_access allow CONNECT webmin_port localhost
/etc/squid/webmin.acl has following URL.
https://dev-proxy.example
I can access to webmin without squid proxy.
However, I can not access to webmin if squid proxy is set.
Do you have any suggestion for this?
My environment is as following.
Ubuntu 18.04.4 LTS
SQUID Version 3.5.27
webmin version 1.941
Best regards,
I solve it myself.
I added following.
acl SSL_ports port 10000
I'm coming with a question and struggling because I already made setup LEMP + CSF FireWall + Nginx WordPress block + OpenVPN.
So - I have a problem with blocking access to wp-login.php file and /wp-admin directory at the server.
Already I made successful blocking for anybody there, but I can't make access for connections from VPN tunneling.
Legend:
IP: 1.1.1.1 - server IP
IP: 10.8.0.2 - IP what I've got at VPN connection
It's my location blocking block at nginx:
location ~ ^/(wp-admin|wp-login\.php) {
allow 1.1.1.1;
deny all;
}
It's my OpenVPN conf file:
port 1194
proto udp
dev tun
sndbuf 0
rcvbuf 0
ca ca.crt
cert server.crt
key server.key
dh dh.pem
auth SHA512
tls-auth ta.key 0
topology subnet
server 10.8.0.0 255.255.255.0
ifconfig-pool-persist ipp.txt
push "redirect-gateway def1 bypass-dhcp"
push "dhcp-option DNS 8.8.8.8"
push "dhcp-option DNS 8.8.4.4"
keepalive 10 120
cipher AES-256-CBC
comp-lzo
user nobody
group nobody
persist-key
persist-tun
status openvpn-status.log
verb 3
crl-verify crl.pem
I tried to allow connections for 10.8.0.0/24 and for server IP... and still, I'm getting error 403 when I'm trying to get there through VPN.
Edit
I tried to add redirection to VPN push "redirect-gateway def1" and in location blocks, I changed from 1.1.1.1 to 10.8.0.0/24 and still nothing (even with 1.1.1.1 don't work).
Edit 2
I changed assigned IP from VPN to the client 16.8.*.* (/24) address. I can't access to file (wp-*) when I'm giving in block allow 1.1.1.1; allow 16.8.0.0/24; deny all.
It's training VPS so I can struggle more with it :D
What could be happening is that you are trying to access your site using the public IP of your VPN but not the private, seems that you already tried this:
location ~ ^/(wp-admin|wp-login\.php) {
allow 1.1.1.1;
allow 10.80.0.0/24;
deny all;
}
But now try to check what is current IP doing the request, give a try to this:
location /myip {
default_type text/plain;
return 200 "$remote_addr\n";
}
And then query yoursite/myip it should print the IP you are using to access and the one probably you want to only allow. (in case is a public IP probably the IP will match the one printed here https://myip.country/ip)
My machine L has only an IPv4 address.
I want to access a web page S from L through a VPS P2 that has only an IPv6 address.
I have a VPS P1 that has a single interface with two addresses: IPv4 and IPv6.
So the whole chain should be L(IPv4) -> P1(IPv4) -> P1(IPv6) -> P2(IPv6) -> S(IPv6)
I have installed Squid 3.3.8 on each VPS (running Ubuntu).
Here is the configuration of P1:
http_port 3128
cache_peer 2001:XXXX:XXX:XX:XXX:XXXX:XXXX:66bc parent 3128 0 no-query no-digest default
never_direct allow all
Here is the configuration of P2:
http_port 3128
http_access allow all
I get this error: HTTP/1.1 403 Forbidden. It appears that there is a problem in P1(IPv4) -> P1(IPv6) or in P1(IPv6) -> P2(IPv6). The latter is more likely, I guess. How can I fix this?
Notes:
I know I can access S directly from P1. I tried it (by using http_access allow all instead of never_direct allow all). It works. But this is not what I want.
I don't care about security now (e.g., setting restrictive ACLs).
The problem was in the configuration of P1. I should have maintained http_access allow all:
http_port 3128
cache_peer 2001:XXXX:XXX:XX:XXX:XXXX:XXXX:66bc parent 3128 0 no-query no-digest default
never_direct allow all
http_access allow all
I am trying to build transparent proxy with squid on OpenBSD 5.7 with pf firewall.
I compile squid from source with below options:
$ squid -v
Squid Cache: Version **3.4.13**
configure options:
--prefix=/usr/local/squid
--with-default-user=squid
--enable-icmp
--enable-storeio=ufs,aufs
--enable-removal-policies=lru,heap
--disable-snmp
--disable-wccp
--disable-wccpv2
--enable-pf-transparent
--enable-ipv6
--enable-referer-log
--with-nat-devpf
--enable-debug-cbdata
--enable-useragent-log
--enable-refererlog
--enable-cache-digests
--with-large-files
--with-pthreads
--without-mit-krb5
--without-heimdal-krb5
--without-gnugss
--disable-eui
--disable-auth
--enable-ltdl-convenience
$ uname -a
OpenBSD dns.localdomain 5.7 GENERIC#825 amd64
My squid.conf:
visible_hostname dns.local
acl localnet src 192.168.1.0/24 # RFC1918 possible internal network
acl SSL_ports port 443
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 # https
acl CONNECT method CONNECT
http_access deny !Safe_ports
# Deny CONNECT to other than secure SSL ports
http_access deny CONNECT !SSL_ports
# Only allow cachemgr access from localhost
http_access allow localhost manager
http_access deny manager
#
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
#
# allow
http_access allow localnet
http_access allow localhost
# And finally deny all other access to this proxy
http_access deny all
# Squid normally listens to port 3128
http_port 3128
http_port 127.0.0.1:3129 intercept
# disk cache directory.
cache_dir ufs /usr/local/squid/var/cache/squid 100 16 256
# Leave coredumps in the first cache dir
coredump_dir /usr/local/squid/var/cache/squid
#
# Add any of your own refresh_pattern entries above these.
#
refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
refresh_pattern . 0 20% 4320
Enabled gateway to connect Internet:
net.inet.ip.forwarding=1
net.inet6.ip6.forwarding=1
pf.conf:
int_if = "vic1"
ext_if = "vic0"
lan_net = "192.168.1.0/24"
# Settings
set block-policy return
set loginterface egress
set skip on lo
# NAT
match out on egress inet from !(egress:network) to any nat-to (egress:0)
pass in quick log on $ext_if inet proto tcp from 192.168.1.0/24 to port www divert-to 127.0.0.1 port 3129
pass out quick log inet from 192.168.1.0/24 divert-reply
#
# Rules
#
block all
# allow dns
pass quick on {$int_if, $ext_if} inet proto udp from {self, $lan_net} to any port 53
# allow local access to web
pass quick on $ext_if inet proto tcp from {self} to any port 80
# allow icmp
pass quick on $int_if inet proto icmp from $lan_net to any
# allow ssh from $ext_if
pass quick on $ext_if inet proto tcp from any to ($ext_if) port 22
I think problem in pf rule. Because pf can not divert packet to port 3129? I've tested with command:
nc -l 3129
but it didn't response any HTTP header.
The rule in Squid wiki can not apply to pf because syntax error.
Thank You in advance
Maybe you mean $int_if instead of $ext_if on this rule? :
pass in quick log on $ext_if inet proto tcp from 192.168.1.0/24 to port www divert-to 127.0.0.1 port 3129
As I understand, you want to divert traffic comming from internal network to local port 3129.
I have 3 virtual machines. I have Squid proxy installed on one of them which functions as a router. I need to configure it to accept HTTP requests from only one of the other 2 machines(IP - 172.16.2.2). The change I made to the squid.conf file is:
http_port 172.16.2.2:3128
I then changed the firewall rule in the route machine so that it redirects traffic from 172.16.2.2 bound for 80 (HTTP port number) to the default squid port 3128. The command is given below:
sudo iptables -A PREROUTING -t nat -i eth1 -p tcp --dport 80 -j REDIRECT --to-port 3128
Machine 172.16.2.2 is connected to the router on eth1. However, whenn I am making sending a HTTP request from 172.16.2.2, I get a 403 Forbidden error. It says:
X-Squid-Error: ERR_ACCESS_DENIED 0
I can't understand it. Please help.
(edited for style)
http_port is used to configure where squid is listening for request, so if you include an ip address, it should be configured in the same machine that is listening. So, in your case 172.16.2.2 (the "other" machine) is not a correct configuration.