I want to start a blog design from scratch as a week-ends project, but I have problem to see how I can render it via CSS.
In a CSS grid system you can define the size of a column based on the number of elements e.g. I have 12 based grid and I can decide to have 2 columns: 2 of the size of 6 or one of 5 and one of 7.
[EDIT] I found a website example that does what I would like to achieve: http://www.by-form.net/
Thanks~
The thing about vertical sizing is that it should grow as your content grows, that's why grid systems only include rows with 12 columns, because you'll need your page to grow as the content in it does. As stated before (and I'm not sure if you meant pure CSS grid system when you asked or if you were referring to bootstraps grid system or something similar), you can use a lot of different frameworks to achieve this like Bootstrap or Materialize or even create one yourself (which is a great exercise if your objective is to understand how this works, but not so much if you want to be productive about your project).
Thank you for your answers guys,
I found 2 ways to answer that issue:
the masonry grid Javasript layout that handle very closely to the original idea of how I wanted to handle it.
or a nested grid (a grid within a grid), e.g. profoundgrid
I don't have much knowledge about this but using bootstrap css you can achive the grid system.
check this out
Your grid in the image is very complex.
I don't think you can achieve a layout like this without any rows or columns that is flexible enough.
What I mean by that is, that you surely want the boxes to grow when the content gets bigger. This could be a big problem cause there are so many dependencies to next and previous columns.
I wrote an answer to a similar question showing a variety of CSS Techniques to do layouts. Check it out, it might be helpful here.
Anyway, if you reduce some dependencies and know exactly what the order of the content should be and look like, it would be much easier.
Related
When learning CSS and making responsive column layouts, I was taught the flexbox method (but also the fact that you should avoid using it too much). Recently, I watched a newer video from teamtreehouse that uses columns, column-counts and so on, to make a responsive column design. Which one is better to use, or is there a third option that is the best?
Edit: Sorry, apparently it's an older video. The reason I'm asking is because it wasn't on my web design track so I wasn't sure whether it was relevant anymore.
Most modern page layouts are moving away from floated columns and migrating to flexboxes. You'll find that even bootstrap 4 are going to be basing their layouts on flexbox.
The main advantage of using flexbox I find is vertical alignment, which is revolutionary. Because before that was one of the biggest pains developers had to face. You can also re-order dom elements which is pretty cool. There's also flex basis, which allows you to have a div with a fixed dimension, and allow other divs to occupy the remainder of the width/height. The possibilities are endless!
TL;DR Flexbox makes your life hella easier. Only if supporting older browsers isn't an issue.
I came across the column-count in our codebase, and was surprised by it, after 6 years of being a frontend dev, I hadn't heard of it. So I dove into it a little bit and also found this thread. To answer the original question above:
When to use column-count
When you are using a lot of text or for instance checkboxes, and you want to order them into columns, column-count is a good option. It basically creates the columned layout of a news paper article for you. So you give the number of columns and the browser will calculate the height. The drawback here is that you often times don't want multiple columns on smaller devices, so you would have to put it within a media query. If you want to know more about it, read this article: https://www.smashingmagazine.com/2019/01/css-multiple-column-layout-multicol/
When better not to use column-count
If you want to have more control over your columns and rows, for instance where certain content should go within the column, use flexbox or grid. Also when you don't want columns to have the same width, you are better of with flexbox or grid.
Note that CSS grid is not the same as the old floated columns. It sounds like teamtreehouse used CSS grids.
The CSS grid is a 2d system (rows and columns) while flexbox is 1d (either rows or columns). So they can be used in conjunction, css grids for the page layout and flexbox for the internal detail layout. See :
https://tutorialzine.com/2017/03/css-grid-vs-flexbox
You might want to take a look at Boostrap if you are already comfortable with CSS and want a responsive design. It's easy to pickup. I find it saves me alot of time and effort rather than coding your own CSS for every project.
When working with css you need to constantly think what browsers you want to support, and then choose which features to use. For that there's a handy website http://caniuse.com/
For example in your case you can see that ie8 doesn't support columns http://caniuse.com/#search=columns and neither it supports flexbox http://caniuse.com/#search=flexbox so if you want to support ie 8 I suggest you would use the tipical floated column approach. There's many grid systems out there but I'd go with as suggested above. http://getbootstrap.com/
So I have looked all over the web and thei site and can't quite figure it out.
I want to create a custom grid in Bootstrap. The container should be 5760px and have 36 columns with 20px gutters. I know this is ridiculously large. but what I am trying to do is essentially have 3 12 column grids (each 1920px wide) side by side.
I've tried the custom build for Bootstrap but I don't really understand the container / grid system I guess. Also I am using Sass as opposed to Less. So that presents another twist.
If I could just get the css and by pass all the Sass / Less stuff that would be great.
Ok so im going out on a limb here, but if you're working with bootstrap and you want to configure the basics so much.
What you can do is download a customized version of it.
Take a look here : Boostrap 3
Here you will be able to customize the amount of columns you wish to work with : Custom Grid Count
And you will also be able to select the container size. : Container Width
Along with all the features of bootstrap.. And all from bootstrap themselves.
Once you have all your fields filled in and edited to your spec, scroll to the bottom and 'compile' it!
As an answer goes its really the best i think I can offer!
I have been trying to create a 3 column layout with divs but I haven't found any way to do the following:
I haven't found any info on how to do this. Basically I want the divs to be able to be added in any order and have the margins the same.
The Twitter Bootstrap grid system is especially suited for this type of layout. If you want more specific help, please provide some code on what you've already tried.
I had experience with Twitter Bootstrap and Foundation, and I personally think the only thing I want to use is their grid system. Other features are just bloated.
So I read about the prospect of a grid layout. All of the articles I found are oriented toward an 'artistic' explanation (golden ratio ect). I am a coder at heart, I need a clear & logical reason to use a grid layout (for example: 'columns can be easily stacked on top of each other on mobile screen, and expand horizontally on larger screens'). Can someone give me the pros and cons of applying a grid system to my website? Personally do you think using a grid system is good?
If the answer is yes, should I use a premade grid system like from Twitter Bootstrap/Foundation or just make one for my own? All of the other features are unnecessary for me an irrelevant to my problem.
Thanks! :D
I agree with #kunalbhat that this might not be the best area to ask this but since you did I will try to answer it.
The grids are designed allow for speed and adaptability. Speed in multiple senses. The first part of the speed is the speed of writing the code. You can easily get the layout you want when you are using the grid system and everything aligns correctly. You don't have to remember your tables and columns and col-spans, etc.
The second speed is modifying your code. Inevitably you will need to go back and make changes, with a grid this is easily to do. Changing a col-md-7 to a col-md-6 easily makes a little tweak in the layout of your page that can easily be tracked and performed.
You mentioned responsive design, both Bootstrap and Foundation have responsive grids. The grids will snap to different sizes based on the viewport size. However you have control as well. For example if you want something to take 1/12th the screen in desktop, 1/4th on a tablet, and 100% on a phone that is easily done with Bootstrap and Foundation, both have grid classes that target specific viewports.
The also provide visibility classes based on those viewports.
For the "bloated" part that is easily solved. Using SCSS you can easily only import portions of a library. For example for one project I was on I only imported the Grid and it was considerably smaller.
I happen to think that this is a SO question, simply because of one of the main cons of CSS grid systems: semantic.
I think semantic is important for a web developer and having a class named col-md-7 is not the most semantic thing to do.
But I like grids, because they are easy and quick to use, so I started to use LESS. Because it allows me to use variables and functions(mixins) in CSS, I can build my own grid system on my CSS rather then on my HTLM.
You can start on Frameless and customize your own 'classes'.
I'm trying to create a three column layout in CSS only with fixed left and right columns and a fluid central column. I have searched online but nothing has worked when I implement it. I don't know whether this is particularly relevant but my central column is (or contains, I've tried both) an iframe. This seems to be contributing to the complication.
Have you tried using an 960 grid ?
http://960.gs/
Otherwise there are many examples for using fixed and fluid grid layouts in the web:
http://matthewjamestaylor.com/blog/perfect-3-column.htm
http://www.dynamicdrive.com/style/layouts/item/css-liquid-layout-31-fixed-fluid-fixed/
This is the one you are looking for.
Btw: Please provide some of your code, or do a jsfiddle about it !