Hi ,
I am trying to install nmon in Unix box.
nmon : nmon_x86_64_rhel6
Linux box is a 64 bit one too
steps i did for installation:
wget http://sourceforge.net/projects/nmon/files/nmon_x86_64_rhel6
chmod +x nmon_x86_64_rhel6
ln -s nmon_x86_64_rhel6 nmon
export NMON=cmt
but when i invoke nmon
i am getting an error message saying
****nmon: error while loading shared libraries: libtinfo.so.5: cannot open shared object file: No such file or directory****
Got the answere
https://gist.github.com/sunggun-yu/4416430
Follow the steps and now the nmon is running fine
Related
Prog:dist abhishek$ composer network deploy -a my-network.bna -p hlfv1 -i PeerAdmin -s randomString
Deploying business network from archive: my-network.bna
Business network definition:
Identifier: my-network#0.1.6
Description: My Commodity Trading network
✖ Deploying business network definition. This may take a minute...
Error: Error trying deploy. Error: Error trying install composer runtime. Error: Connect Failed
Command failed
when trying to install the composer runtime,returns
Prog:dist abhishek$ composer runtime install -n my-network -p hlfv1 -i PeerAdmin -s randomString
✖ Installing runtime for business network my-network. This may take a minute...
Error: Error trying install composer runtime. Error: Connect Failed
Command failed
I've been working through the Hyperledger Composer tutorial (https://hyperledger.github.io/composer/tutorials/developer-guide.html) on an older Mac, running OS X Mavericks 10.9.5, which means I'm using Docker Toolbox instead of Docker for Mac. I encountered the same error message when deploying the sample Trading network .bna file on my local dev environment Fabric network.
Here is the command in Terminal:
$ composer network deploy -a my-network.bna -p hlfv1 -i PeerAdmin -s randomString -A admin -S
And here is the error log:
Error: Error trying deploy. Error: Error trying install composer runtime. Error: Connect Failed
In my case, it was because Docker Toolkit answers to on an IP address assigned when you start docker, instead of localhost, 127.0.0.1, etc.
If you are also using Docker Toolkit and are getting the same error, first find the docker IP number, which should be listed under the Docker Whale logo in Terminal when you started it, and then edit the following files (TextEdit should be fine), changing all references to localhost and 127.0.0.1 to the IP number (leave the ports, such as :7050, there):
fabric-tools/fabric-scripts/hlfv1/composer/configtx.yaml
fabric-tools/fabric-scripts/hlfv1/composer/docker-compose.yml
fabric-tools/fabric-scripts/hlfv1/createComposerProfile.sh
fabric-tools/fabric-scripts/hlfv1/createPeerAdminCard.sh
Then, back in Terminal, navigate back to fabric-tools, and if Fabric is already started, stop it, and then recreate the Composer Profile, as documented:
$ ./stopFabric.sh
$ ./createComposerProfile.sh
The log should now show the Docker Toolkit IP for the orderers, CA and peers. Now restart Fabric:
$ ./startFabric.sh
Navigate back to fabric-tools/my-network/dist and re-run the compose command, and if all goes well, it should connect properly.
Is your Fabric running? What is the output of docker ps?
Try doing the next:
Pick a directory that you want and install Hyperledger Fabric and Hyperledger Composer Playground running:
curl -sSL https://hyperledger.github.io/composer/install-hlfv1.sh | bash
Then run your command.
Try the code below:
$composer runtime install -c PeerAdmin#hlfv1 -n basic
$composer network deploy -a basic.bna -A admin -S adminpw -c PeerAdmin#hlfv1 -f admincard
I am trying to run Neuraltalk2 on Ubuntu. But I am getting an error as follows:
parag#parag:~/torch$ sudo luarocks install nn
[sudo] password for parag:
Error: No results matching query were found.
I followed the following steps uptill now:
sudo curl -s https://raw.githubusercontent.com/torch/ezinstall/master/install-deps | bash
sudo git clone https://github.com/torch/distro.git ~/torch --recursive
sudo cd ~/torch;
sudo ./install.sh
sudo source ~/.bashrc
Please help!
Try running this all without sudo. The last line, especially, sudo source ~/.bashrc does not work because source is meant to operate on the shell you are currently running. If you run it with sudo, it will load .bashrc into the temporary subshell created by sudo (in practice having no effect).
Your error message indicates that luarocks was installed correctly, but it failed to find the rock. Make sure the name of the rock is correct, try searching it with the luarocks search command, and check your configuration running luarocks with no arguments (it will display the name of your config files in use, helping you to troubleshoot the issue).
This Q&A is a response to this comment. The answer to the question in the comment is not trivial, is too big for a comment, and not suitable as an answer to the question in that thread (answering my own question is officially encouraged). If you have a better answer please post it!
The question is: How to install R on Solaris on a VirtualBox virtual machine?
A more up-to-date version is available from csw: r_base. To install, see the example in Getting started where you replace vim with r_base:
pkgadd -d http://get.opencsw.org/now
/opt/csw/bin/pkgutil -U
/opt/csw/bin/pkgutil -a r_base
/opt/csw/bin/pkgutil -y -i r_base
To install a development environment, you might also want:
/opt/csw/bin/pkgutil -y -i gcc4g++
/opt/csw/bin/pkgutil -y -i texlive
Start by downloading and installing Oracle VM VirtualBox.
Then download and unzip the Oracle Solaris 11.1 VirtualBox Template. After you unzip the Oracle template you should see a file called OracleSolaris11_1.ova, that's what you'll open in VirtualBox.
Start VirtualBox, click on File, then Import Appliance, then navigate to chose the ova file you just extracted. It will take some time to import.
Start the Solaris virtual machine by clicking on the start button on VirtualBox. It will take some time to start up and you'll be prompted to add a root password, user name and user password. You'll then use those details to log in, wait for the system to load, choose gnome to ensure you get a desktop environment, and choose your time zone, keyboard layout and language (mine seems to highlight Chinese as the default choice, so be careful not to click through that one too quickly).
Eventually you'll get a desktop, right-click on the desktop and click open terminal, then in the terminal type (or paste):
sudo wget https://oss.oracle.com/ORD/ord-3.0.1-sol10-x86-64-sunstudio12u3.tar.gz && sudo wget https://oss.oracle.com/ORD/ord-3.0.1-supporting-sol10-x86-64-sunstudio12u3.tar.gz
That will connect to the internet and download two files you need. The next line will unpack those two archives:
sudo tar -xzvf ord-3.0.1-sol10-x86-64-sunstudio12u3.tar.gz && sudo tar -xzvf ord-3.0.1-supporting-sol10-x86-64-sunstudio12u3.tar.gz
And then this next line installs R, watch for the prompts after you run the line:
sudo bash install.sh
A lot will flash by in the terminal, concluding with Installation of <ORD> was successful
Now the next bit is where I deviate from the instructions here because I didn't understand them. You'll move all files beginning with lib from the archives that you unpacked into another directory where they are needed by R:
sudo mv lib* /usr/lib/64/R/lib/
That will return nothing in the terminal. Then we can run R simply by typing in the terminal like so
R
And now you should have a regular R session running in the terminal.
I am trying to install Meteor on the HP14 Chromebook. It is a linx x86_64 chrome os system.
Each time I try to install it I run into errors.
The first time I tried to install it the installer just downloaded the Meteor preengine but never downloaded the tarball or installed the actual meteor application structure.
So, I decided to try as sudo.
sudo curl https://install.meteor.com | /bin/sh
This definitely installed it because you can see it when ls
chronos#localhost ~/projects $ chronos#localhost ~/projects $ ls /home/chronos/user/.meteor/
bash: chronos#localhost: command not found
Now when I try to run meteor --version or meteor create myapp without sudo I get the following error.
````
chronos#localhost ~/projects $ meteor create myapp
'/home/chronos/user/.meteor' exists, but '/home/chronos/user/.meteor/meteor' is not executable.
Remove it and try again.
````
When I try to run sudo meteor --version or sudo meteor create myapp I get this error.
chronos#localhost ~/projects $ sudo meteor create myapp
mkdir: cannot create directory ‘/root/.meteor-install-tmp’: Read-only file system
Any ideas? Thinking I have to make that partition writeable. I made partition 4 writeable.
Put your chrome book into dev mode.
http://www.chromium.org/chromium-os/developer-information-for-chrome-os-devices
Boot into dev mode.
ctrl-alt t to crosh
shell
sudo su -
cd /usr/share/vboot/bin/
./make_dev_ssd.sh --remove_rootfs_verification --partitions 4
reboot
After rebooting
sudo su -
mount -o remount,rw /
mount -o remount,exec /mnt/stateful_partition
Write yourself a read/write script
sudo vim /sbin/rw
#!/bin/bash
echo "Making FS Read/Write"
sudo mount -o remount,rw /
sudo mount -o remount,exec /mnt/stateful_partition
sudo mount -i -o remount,exec /home/chronos/user
echo "You should now have full Read/Write access"
exit
Change permissions on script
sudo chmod a+x /sbin/rw
Run to set read/write root
sudo rw
Install Meteor as indicated on www.meteor.com via curl and meteor create works!
Alternatively you can edit the chomeos_startup though that might not be the best idea. It is probably best to have read/write on demand as illustrated above.
cd /sbin sudo
sudo vim chromeos_startup
Go to lines 51 and 58 and remove the noexec options from the mount command.
Down at the bottom of the script, above the note about ureadahead and below the if statement, add in:
mount -o remount,exec /mnt/stateful_partition
#uncomment this to mount root r/w on boot
mount -o remount,rw /
Again, editing chromeos_startup probably isn't the best idea unless you are so lazy you can't type sudo rw.
Enjoy.
This is super easy to fix!!
Just run this (or put it in .bashrc or .zshrc to make it permanent):
sudo mount -i -o remount,exec /home/chronos/user
Based on your question (you are using sudo) I assume you already have Dev Mode enabled, which is required for the above sudo command to work.
ChromeOS mounts the home folder using the noexec option by default, and this command remounts it with exec instead. And boom, Meteor will work just fine after that (and so will a bunch of other programs running out of your home folder).
Original tip: https://github.com/dnschneid/crouton/issues/928
I'm trying to run Image application from server "bert"
I connected through my OSX Maverick as
ssh ak324#bert.eecs.qmul.ac.uk
I compiled my file with
$ make
but when I run the resulting file
$ ./window
it gives me the following error:
Error: Unable to initialize gtk, is DISPLAY set properly?
How can I solve this problem?
You should connect with the -X or -Y option to be able to launch graphical applications:
ssh -X ak324#bert.eecs.qmul.ac.uk
If that doesn't help, you should consult /etc/ssh/sshd_config whether X11Forwarding is enabled.
On macOS you need to install xquartz for x11 support https://support.apple.com/de-de/HT201341.
Then you can connect with
ssh -Y ak324#bert.eecs.qmul.ac.uk
Try running ssh with the flags -Y -v.
If the following line appears on the terminal during the ssh connection, install xauth on your remote system.
debug1: Remote: No xauth program; cannot forward with spoofing.
As suggested here.